FA805126Q4008 Amendment 02.docx

SOLICITATION FA805126Q4008 - AMENDMENT 02

The purpose of Amendment 02 to Solicitation FA805126Q4008 is to:

1. Incorporate Questions & Answers (Q&As): Incorporate official Government responses to vendor inquiries received during the solicitation period. The Q&As are detailed below.

2. Replace Attachment 1 (Clauses): Incorporate Attachment 1 Clauses, Revised August 24, 2026, which replaces the previous Attachment 1 in its entirety. The updated clause list removes DFARS clause 252.206-7000, Domestic Source Restriction.

3. Replace Attachment 2 (Line Item Pricing): Incorporate Attachment 2, Line Item Pricing, Revised August 24, 2026, reflecting changes detailed in the Q&As. This document replaces the previous Attachment 2 in its entirety. NOTE: Offerors must utilize the revised Attachment 2 when submitting their quote.

4. Replace Attachment 3 (Salient Characteristics): Incorporate Attachment 3, Salient Characteristics, Revision 1, dated August 24, 2026, reflecting changes detailed in the Q&As. This document replaces the previous Attachment 3 in its entirety.

5. Extend the Quote Due Date: The deadline for receipt of quotes is hereby extended from 2 September 2026 at 0800 Central Daylight Time (CDT) to 4 September 2026 at 0800 CDT.

6. Acknowledgement Requirement: Offerors must acknowledge receipt of this amendment (Amendment 02) prior to the hour and date specified in the solicitation, as amended.

All other terms and conditions remain unchanged.

FA805126Q4008 Amendment 02 – Question and Answer

1. On FA805126Q4008, Attachment 3 asks for 6 lbs or less alongside a 48 MP primary sensor on a 1 inch or larger sensor, 30 mK thermal, and C2 beyond 5 miles. Is there a cleared platform other than the named one that you've seen meet all nine at once? And are all nine mandatory minimums, or are some preferences? We can't build an equal without knowing which lines are threshold.

All requirements listed in the salient characteristics document are minimum requirements and must be met to be rated technically acceptable.

2. No delivery date, number of days after award, or delivery milestone appears in the RFQ or in Attachments 1, 3, or 4. What delivery timeframe is required?

Delivery is required 145 days after receipt of order (ARO).

3. Attachment 2 CLIN 0001 is the "3D Scan Starter Solution (SL and IR)" and CLIN 0002 separately prices "NightSense with IR attachment." Please confirm CLIN 0002 is an add-on whose content is not already included in CLIN 0001, so that the infrared capability is not priced twice.

The Government clarifies that the Visible Light version of the NightSense attachment is required, not the IR version. As a result, Attachment 2, Line Item Pricing is revised at line item 0002 from: “NightSense with IR attachment…” to: "NightSense with Visible Light attachment..."

4. Relatedly, Attachment 3 item 9 requires loudspeaker, dropper, and infrared attachments, but Attachment 2 also prices an RTK/PPK module at CLIN 0003 and a spotlight at CLIN 0005, neither of which appears in Attachment 3. Please confirm CLIN 0003 and CLIN 0005 are required and are to be priced.

CLIN 0003 (RTK/PPK Module) and CLIN 0005 (Spotlight) are required and must be priced by offerors. Attachment 3 (Salient Characteristics) is hereby revised to correct 9. from: “and Infrared attachments included for the sUAS platform” to: “and spotlight”. Additionally, 10. is added to Attachment 3 for the RTK/PPK module.

5. Attachment 4 identifies the shipping destination but does not state a required delivery date. What is the required delivery date or acceptable delivery lead time after award?

Delivery is required 145 days after receipt of order (ARO).

6. Because this acquisition is a total small-business set-aside under NAICS 336411, does the nonmanufacturer rule apply? If so, has an SBA class or individual waiver been issued or requested for this requirement?

No, the nonmanufacturer rule does not apply to this solicitation. Under the revolutionary FAR Overhaul 19.104-3(e)(1), the NMR applies to total small business set-asides when the acquisition value exceeds the Simplified Acquisition Threshold (SAT).

7. What documentation must offerors provide to demonstrate compliance with DFARS 252.206-7000 and the other applicable domestic-source requirements?

Amendment 0001 removes DFARS 252.206-7000 from the solicitation. See updated Attachment 1, Clauses.

8. Does the requested Skydio X10D 3D Scan Starter Solution include all required software licenses and subscriptions? If subscriptions are required, what license term should be included in the quoted price?

The requirement includes software licenses for 3D Scan capability and Autonomous flight operations. See updated Salients Characteristics and Line Item Pricing, Attachments 3 and 2, respectively.

9. Do CLINs 0001 through 0006 represent the complete required configuration, or must the quotation include additional batteries, chargers, controllers, cases, training, support plans or accessories?

Line Item 0007 is being added to Attachment 2, Line Item Pricing, and Attachment 3, Salient Characteristics, for a field ready kit to include four (4) flight smart batteries; one (1) dual battery rapid charging hub and adapters; four (4) replacement tri-blade propeller sets; and one (1) hard-sided rugged case. See revised documents attached.

10. For an offer of the specified Skydio products, what technical documentation must be submitted to establish acceptability—for example, manufacturer specifications, a salient-characteristics compliance matrix, authorized-reseller documentation or a combination of these?

To establish technical acceptability for the specified Skydio products, offerors must submit technical documentation demonstrating the product meets all salient characteristics (e.g., manufacturer cut sheets or a compliance matrix). Offerors should also submit authorized-reseller documentation.

11. The evaluation language refers to the CLIN Structure Price Sheet as Attachment 3, while the provided Line Item Pricing document is labeled Attachment 2. Please confirm that offerors should complete and submit Attachment 2 for pricing.

Offerors must complete and submit Attachment 2, Line Item Pricing, to provide their pricing.

12. Please confirm whether Item Unique Identification marking and reporting apply to each drone system or to any individual accessories under this procurement.

Item Unique Identification marking and reporting apply to each drone system. It does not apply to individual commercial accessories included within accessory kits.

Attachments:

1. Q4008 Atch 1 Clauses - Amend 02

2. Q4008 Atch 2 Line Item Pricing – Amend 02

3. Q4008 Atch 3 Salient Characteristics - Amend 02