Atch_2_LOE_MIL-C-3261_110908.pdf
Military Specification PDF 93 KB Posted
- Solicitation number
- FA7000-14-T-0002
About this file
Attachment 2 to FA7000-14-T-0002 USAFA LOE to MIL-C-3261F dated 8 Sept 2011 Men's Cadet Flight and Officer Flight Caps
View the file
Other versions and copies of MIL-C-3261
Show all 17
Who attaches MIL-C-3261
| Agency | Files |
|---|---|
| Department of the Air Force Headquarters Air Force Academy | 18 |
Other files
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FA7000-14-T-0002
Attachment 2
USAFA LOE
8 September 2011
MIL-C-3261F
USAFA LETTER OF EXCEPTON
CAP, GARRISON, MAN’S, AIR FORCE, 1620
The following exceptions will apply when MIL-C-3261F is used to manufacture flight (garrison) caps for graduating male cadets at the U .S. Air Force Academy.
1. Page 1, paragraph 1.2 Classification. Class 2 Officer, shall be applicable for
USAFA contracts.
2. Page 2, Paragraph 1.2.1 Sizes. Add size 8 and 8 1/8 to the schedule of sizes.
3. Page 2, Paragraph 2.1.1 Specifications, Standards and Handbooks. Disregard, supplement or replace the following military specifications/standards:
SPECIFICATION REPLACEMENT DOCUMENT TITLE
PPP-B-636 ASTM-D1974 BOX, SHIPPING, FIBERBOARD
V-T-276 A-A-52094 THREAD, COTTON
DDD-L-20 MIL-DTL-32075
LABEL: FOR CLOTHING, EQUIPAGE, AND TENTAGE,
(GENERAL USE)
PPP-B-601 ASTM-D6251 BOXES, WOOD, CLEATED-PLYWOOD
PPP-B-636
ASTM-
D1974/D1974M
FIBERBOARD, BOXES, METHODS OF CLOSING,
SEALING, AND REINFORCING
PPP-T-45
A-A-1492 and A-
A-1671
TAPE, GUMMED, PAPER, REINFORCED AND PLAIN,
FOR SEALING AND SECURING
MIL-B-1667 A-A-55264 BRAID, TEXTILE, CORD-EDGE
MIL-S-3577
Cancelled
Replace with
A-A-59701
SWEATBAND, HEADWEAR, LEATHER (NO S/S
DOCUMENT)CANCELLED, REPLACE WITH NYLON
BUNTING FOR SWEATBAND, TYPE I, CLASS A OF A-
A-59701, SEE 3.3.3
MIL-C-21115 MIL-DTL-21115 CLOTH, TROPICAL: WOOL, POLYESTER/WOOL
MIL-T-43548 A-A-50199
THREAD, POLYESTER CORE: COTTON-, RAYON-, OR
POLYESTER-COVERED
MIL-C-43718 A-A-52106
CLOTH, POLYESTER; POLYESTER AND COTTON;
POLYESTER AND RAYON POCKETS
MIL-C-83448 Cancelled CLOTH, SERGE, POLYESTER, TEXTURIZED
MIL-DTL-823 Add
CLOTH, POLYESTER AND WOOL, TYPE III, CLASS 4,
9.5 OZ, AF BLUE 1620
FED-STD-751 ASTM-D6193 STITCHES, SEAMS, AND STITCHINGS
MIL-STD-105 ANSI-Z1.4
SAMPLING PROCEDURES AND TABLES FOR
INSPECTION BY ATTRIBUTES
MIL-STD-147 MIL-HDBK-774 PALLETIZED UNIT LOADS
USAFA LOE
4. Page 4, Paragraph 3.1 First Article. Disregard the entire paragraph and substitute with the following: “Before each production is commenced, the contractor shall submit to the contracting officer, for inspection the following item:
One finished cap, size 7 ¼”, conforming to the requirements of this specification”.
Note: This requirement may be waived if a prior contractor receives the contract for this item.
5. Page 4, Paragraph 3.3.1 Basic Material. Disregard the entire paragraph and substitute with the following: “The basic material for the cap shall conform to MIL- DTL-823, Cloth, Polyester and Wool, Type III, Class 4, Air Force Shade 1620,
9.5 ounce, dated 13 April 2005”.
6. Page 4, paragraph 3.3.2 Braid. Disregard the entire paragraph and substitute with the following: The braid for the cap shall conform to class 6 of A-A-55264.
7. Page 4, paragraph 3.3.3 Sweatband. Disregard the entire paragraph and substitute with the following: “Nylon bunting. The nylon bunting for the sweatband shall be dyed black and shall conform to type I, class A of A-A-55264, except that the color–fastness therein shall not apply. The dyed bunting shall show ‘good’ fastness to dry cleaning, perspiration, and crocking when tested.”
8. Page 5, Paragraph 3.3.6 Label. Add the following paragraph:
3.3.6.1 Size/bar-code label. The label shall be approximately 2” x 3”. The numbers for the size shall be at least ¼” in height. The label will also be bar-coded using type 39 bar-code. The Bar-code will consist of the (10LRS/LGRCI) Cadet Issue Section stock number for each size. Label will be attached to the outside of each polyethylene film bag for convenience of wand reading.
9. Page 5, Paragraph 3.5 Design. Disregard the entire paragraph and substitute with the following: “The cap shall be for USAF male officers, envelope style, fully lined, and with USAF Officer silver and blue braid.”
10. Page 17, Table III. Add the bottom row to the table for cap size 8 and 8 1/8.
Height of Side Panels 1/ Height of Curtain 2/
Cap Size
Center Front
Center Back
Overall at Side Center
Center Front
Center Back
Side Circum-ference
3/
8 3 3/4 4 5 1/8 2 3/4 3 3 5/8 25
8 1/8 3 3/4 4 5 1/8 2 3/4 3 3 5/8 25 3/8
Custodian:
USAF Academy, CO 80840-8210
Preparing Activity:
Cadet Uniform (10LRS/LGRCU)
USAFA LOE
Reviewing Activity:
Chief, Cadet Logistics, (10LRS/LGRC)
File details come from the government source that posted it. Updated .