Attachment 9 - B1655 CID Pkg.pdf

95% Design Analysis DDPM 20-0031: Repair F-35 LO Shops, B1655

2 | August 4, 2023

• 3-410-01 Heating, Ventilating, and Air Conditioning Systems

(2013, w/ Change 8 2021)

• 3-420-01 Plumbing Systems (2021)

• 3-600-01 Fire Protection Engineering for Facilities (2016, w/ Change 6 2021)

• 4-211-01 Aircraft Maintenance Hangars (2017, w/ Change 3 2021)

3 Architectural and Interiors

3.1 Design Approach

The architecture design approach is to accommodate the Phase 1 program of requirements within a revised Phase 1 area as efficiently as possible. The revised area now includes a portion of the original Phase 2 area where the restrooms and shower areas will be placed. A portion of the Phase 2 AMXS program will occupy the area designated for restrooms and showers in the original Phase 1. In addition, considerations will be made to successfully plan for forthcoming phases.

The interior design approach consists of refreshing all interior finishes and materials as described below in section 3.4 New Construction.

3.2 General Design Parameters and Assumptions

General design parameters center on renovation and remodeling areas within the current building envelope. Major masonry walls will be preserved as much as possible, but new openings are anticipated with the updated plan. Relative to the building envelope, the repair of the upper and lower roof areas is necessary due to the existing conditions

(leaks) observed.

Assumptions include that there is enough area delineated within the concept Phase 1 area to accommodate the assigned Phase 1 program of requirements and to allow for elements to be included that will support following phases. Also, the recommended roof system replacement should be accomplished prior to the start of interior work scope. The lower roof will require replacement to the next break in roof plane.

3.3 Demolition

Architectural demolition items will include portions of existing masonry walls, gypsum wall board, hollow metal doors and frames, overhead coiling door and frames, overhead hoist and track, portions of exterior insulated metal panel, and exterior windows. The existing roofing system will require demolition down to the structural deck.

At the interior, demolition will encompass existing porcelain tile flooring, ceramic tiled walls, gypsum board walls and ceilings, carpet and epoxy floors, base, window shades, removal of any existing cabinetry, and acoustical lay-in ceiling panels within the scope area in Phase 1. Demolition of existing ceilings will include areas outside of the Phase 1 area to allow for replacement of existing mechanical pipes and mains above ceiling.

95% Design Analysis

DDPM 20-0031: Repair F-35 LO Shops, B1655

August 4, 2023 | 3

Existing shop equipment will be relocated from other parts of the property to within the main shop area and lean-to area.

3.4 New Construction

New architectural items will include new masonry infill, new metal-framed gypsum board partitions (including acoustically enhanced and fire-rated types), new gypsum wall board ceilings and suspended acoustical ceilings, new overhead coiling door and frames, new hollow metal doors and frames, new door hardware, new interior hollow metal window frames, new fixtures and showers at lockers and restrooms, new drinking fountains, and new metal lockers. Additionally, an air shower shall be installed between Decon and

Locker. The building envelope will require a new roofing system over the Phase 1 area and beyond to the next break in the roof plane. Penetrations in exterior wall panels require closure with metal patching and/or silicone sealant depending on the size of the opening. The lean-to area at the north end of the building will require new penetrations to the PEMB envelope to allow for ducting of the new mechanical units. The existing exterior concrete ramp to the egress door at the lean-to area will be replaced with an accessible and compliant concrete ramp, steps and painted metal guardrails.

New interior finish items will include the following:

Floors: Epoxy floor coating, LVT, and porcelain tile.

Base: Epoxy (integral) base, rubber base at LVT, and tile base.

Walls: Painted gypsum board and wall tile.

Ceilings: Acoustical lay-in panels and suspension systems, and gypsum wall board ceilings in wet areas.

Other: New millwork, countertop surfaces, lockers, dressing benches, toilet and shower partitions, stainless steel toilet accessories, window treatments, stainless steel wall protection, windowsills, new paint on door frames and exposed structure elements.

4 Structural

4.1 Design Approach

The structural engineering for this project will be a support role that allows other disciplines to add, replace, or remove electrical or mechanical equipment. New plumbing lines are also anticipated that will require sections of the slab-on-grade to be removed and replaced.

4.2 General Design Parameters and Assumptions

The existing drawings for the building have been provided to the team. The existing drawings are called the Composite Maintenance Facility at Carswell Air Force Base dated August 1989. The roof structure is comprised of open web roof joists supported by interior wide flange girders and exterior concrete masonry unit (CMU) walls. The interior wide flange girders transmit the load to the foundation through wide flange columns. The

AFRC 301 Contracting, 1660 Lyons Dr., NAS JRB Fort Worth, TX 76127

ITEM CODE MFR. QTY GSA UNIT PRICE

CT01 Haworth 18

ST01 Haworth 10

TT01 Haworth 11

D01a Haworth 5

D02 Haworth 2

STORAGE

S01 SHELVING, WIRE, STORAGE Global Industries 13

L01 LOCKER, STORAGE Global Industries 54

A01 MOBILE PED, ACCESSORY Haworth 1

FF&E PRODUCT TOTAL

INSTALLATION ESTIMATE )

ESCALATION

ITEMIZED FF&E COST ESTIMATE

PROJECT TOTAL

TABLES

TABLE, TRAINING

WORKSTATION, FREESTANDING

DESK, L-SHAPED

DESKING SYSTEMS

STOOL

ITEMIZED FF&E COST

ESTIMATE

HDR

B1655 LO SHOP DESIGN

Project Number: 10362240

IFC CID BINDER

9/28/2023

TOTAL COSTITEM NAME

SEATING

CHAIR TASK

STORAGE

S01 SHELVING, WIRE, STORAGE Global Industries

A01 MOBILE PED, ACCESSORY

HDR Project Number: 10362240

IFC CID BINDER

ITEM CODE INDEX / INSTALLATION LIST

ITEMIZED FF&E COST

ESTIMATE

B1655 LO SHOP DESIGN 9/28/2023

CODE

SEATING

CT01

MANUFACTURER

Haworth

DESCRIPTION

CHAIR TASK

ST01

TABLES

HaworthSTOOL

DESK, L-SHAPED

TT01

DESKING SYSTEMS

HaworthTABLE, TRAINING

D01a

D02

Haworth

Haworth

WORKSTATION, FREESTANDING

Haworth

L01 Global IndustriesLOCKER, STORAGE

B1655 LO SHOP DESIGN

AFRC 301 CONTRACTING, 1660 LYONS Dr., NAS JRB FORT WORTH, TX 76127

PROJECT #: 10362240

IFC CID BINDER

QUANTITY: 18

ITEM NAME: CHAIR TASK

▪ Swivel tilt mechanism and waterfall seat.

(IMAGE)

MANUFACTURER

Name: Haworth Series: Soji

Haworth.com Phone:(214) 231 7100

GSA Contract Number GS-03F-057DA DIMENSIONS

Contract Duration February 8, 2015- Febrary 7, 2026 Overall Width: 29"

SIN/FSC Overall Depth: 27 3/4"

Overall Height: 43"

Seat Height: 18"

Weight Capacity: min. 300 lbs.

FINISHES

Frame: Material: Molded plastic Color: Fog

Lumbar: Material: Molded plastic Color: Fog

Mesh: Material: Knit Color: Black

UPHOLSTERY

Seat:

Flame Resistance: CAL117-2013. Flame Retardant Free

Pattern: Medium scale pattern, grade C

Content: 100% Polyurethane Manufacturer: Momentum Name: Row Color: Shale

INSTANCES

ROOM NAME

101 TRAINING 11

102 OFFICE 2

103 TOOL CRIB 1

117 LOASM 2

118 CNC 2

TOTAL 18

ALTERNATE MANUFACTURER

SitOnIt Contact: Allison Sicking

Steelcase Contact: Ashley White

▪ Adjustable lumbar support.

Contact: Allison Lunsford; Allison.lunsford@Haworth.com

325 N. St.Paul Street, Suite150, Dallas, Texas

7110/7125

▪ 10 year minimum warranty.

▪ Height and width adjustable arms.

▪ Enhanced synchro mechanism.

▪ Standard cylinder height.

▪ Hard floor casters.

ITEM CODE: CT01

DESCRIPTION:

▪ High back ergonomic task chair 24/7.

▪ Mesh back, Polyurethan upholstered seat.

Image is provided as basis of design. It is representational only and may differ from actual specification

Manufacturer: Wilsonart

Manufacturer: Haworth

Manufacturer: Haworth

QUANTITY

Email: Allison@csswinc.com

Email: Awhite@steelcase.com

ROOM NUMBER

PROJECT #: 10362240

IFC CID BINDER

QUANTITY: 10

ITEM NAME: STOOL

(IMAGE)

MANUFACTURER

Name: Haworth Series: Soji

Haworth.com Phone:(214) 231 7100

GSA Contract Number GS-03F-057DA DIMENSIONS

Contract Duration February 8, 2015- Febrary 7, 2026 Overall Width: 23"

SIN/FSC Overall Depth: 25"

Overall Height: 33"

Seat Height: 24"

Weight Capacity: min. 300 lbs.

FINISHES

Frame: Manufacturer: Haworth Material: Molded plastic Color: Fog

Mesh: Material: Knit Color: Black

UPHOLSTERY

Seat:

Flame Resistance: CAL117-2013. Flame Retardant Free

Pattern: Solid pattern, graded-in fabric grade C

Content: 100% Polyurethane Name: MonotexColor: Gray Marl

INSTANCES

ROOM NUMBER ROOM NAME

103 TOOL CRIB 4

117 LOASM 3

118 CNC 3

TOTAL 10

ALTERNATE MANUFACTURER

SitOnIt Contact: Allison Sicking

Steelcase Contact: Ashley White

Email: Allison@csswinc.com

Email: Awhite@steelcase.com

▪ Polyurethane upholstered seat, full back support.

▪ Swivel control with pneumatic gas cylinder lift.

▪ 10 year minimum warranty.

Image is provided as basis of design. It is representational only and may differ from actual specification

Contact: Allison Lunsford; Allison.lunsford@Haworth.com

325 N. St.Paul Street, Suite150, Dallas, Texas

7110, 7125

Manufacturer: Haworth

ITEM CODE: ST01

▪ 5 legs with hard floor casters.

▪ No arms, ergonomic contoured seat.

▪ Metal frame, legs are joined to cross member bars with metal insert gas welds.

DESCRIPTION:

QUANTITY

Manufacturer: Luum

PROJECT #: 10362240

IFC CID BINDER

ITEM NAME: WORKSTATION, FREESTANDING

MANUFACTURER

Name: Haworth Series: X Series

Haworth.com Phone:(214) 231 7100

GSA Contract Number GS-03F-057DA DESK DIMENSIONS

Contract Duration February 8, 2015- Febrary 7, 2026 Overall Width: 60"

SIN/FSC 7110/7125 Overall Depth: 30"

Overall Height: 30"

FINISHES

Worksurface: Color: Fashion Gray

Panel: Color: 4E-XD Oxford-Grade B

Storage: Color: Smoke

INSTANCES

ROOM NAME QUANTITY

103 TOOL CRIB 1

117 LOASM 2

118 CNC 2

TOTAL 5

▪ Tray for cable management per desk with flex dock.

DESCRIPTION

▪ Straight, 30 deep, freestanding desk.

Contact: Allison Lunsford; Allison.lunsford@Haworth.com

▪ Fixed storage with box/box file configuration.

▪ Tackboard.

▪ 3mm ABS edge banding to match surface color.

▪ High Pressure laminate work surface.

▪ Tack Board Dimensions W 60" x H 17.25"

▪ Box Box File Dimensions D 29" x W 15"x H 27.5"

ITEM CODE: D01a

325 N. St.Paul Street, Suite150, Dallas, Texas

▪ 12 year minimum warranty.

Manufacturer: Wilsonart Material: High Pressure Laminate

Manufacturer: Haworth Material: Powder Coated Metal

Name: English TweedManufacturer: Haworth

QUANTITY: 5

ROOM NUMBER

Image is provided as basis of design. It is representational only and may differ from actual specification

PROJECT #: 10362240

IFC CID BINDER

QUANTITY: 2

ITEM NAME: DESK, L-SHAPED

▪ Tray for cable management under desk and return. (IMAGE)

▪ Power/Data connections are on the wall. Allow for access.

MANUFACTURER

Name: Haworth Series: X Series

Haworth.com Phone:(214) 231 7100 DIMENSIONS

GSA Contract Number GS-03F-057DA

Contract Duration February 8, 2015- Febrary 7, 2026

SIN/FSC 7110/7125

FINISHES

Worksurface: Color: Fashion Gray

Panel: Color: 4E-XD Oxford-Grade B

Storage: Color: Smoke

INSTANCES

ROOM NAME

102 OFFICE 2

TOTAL 2

Image is provided as basis of design. It is representational only and may differ from actual specificationContact: Allison Lunsford; Allison.lunsford@Haworth.com

325 N. St.Paul Street, Suite150, Dallas, Texas

ROOM NUMBER

Single Ped Desk: 30"d x 72"w, 5" overhang; BBf: 23"d, left hand grommet

Return: 24"d x 42"w, no back panel, right hand grommet

Lateral File: 23"d x 30" w

Overhead: 72" W

Tackboard: 72" W

QUANTITY

Manufacturer: Wilsonart Material: High Pressure Laminate

Manufacturer: Haworth Name: English Tweed

Manufacturer: Haworth Material: Powder Coated Metal

ITEM CODE: D02

DESCRIPTION

▪ L-shaped laminate surface, freestanding desk with metal storage pedestals.

▪ 12 year minimum warranty.

▪ 3mm ABS edge banding, color to complement work surface.

▪ Desk full modesty panel. No back panel for plugs/COMM wall access

▪ File/file lateral file under return 23"d.

▪ Tackboard under overhead storage.

▪ Cable grommet(s) on each work surface.

▪ Wall-mounted overhead storage above desk return w/ light.

▪ Fixed box/box/file pedestal under desk 23"d.

PROJECT #: 10362240

IFC CID BINDER

QUANTITY: 11

ITEM NAME: TABLE, TRAINING

(IMAGE)

MANUFACTURER

Name: Haworth Series: Planes Training

Haworth.com Phone:(214) 231 7100

GSA Contract Number GS-03F-057DA DIMENSIONS

Contract Duration February 8, 2015- Febrary 7, 2026 Overall Width: 72"

SIN/FSC 7110/7125 Overall Depth: 24"

Overall Height: 29"

FINISHES

Worksurface: Material: High Pressure Laminate Color: Fashion Gray

Base: Material: Powder Coated Metal Color: Smoke

INSTANCES

ROOM NAME QUANTITY

TRAINING 11

TOTAL 11

Contact: Allison Lunsford; Allison.lunsford@Haworth.com

325 N. St.Paul Street, Suite150, Dallas, Texas

Manufacturer: Haworth

Manufacturer: Wilsonart

ROOM NUMBER

Image is provided as basis of design. It is representational only and may differ from actual specification

ITEM CODE: TT01

DESCRIPTION:

▪ Grommet cut to accommodate to power unit at center.

▪ C-base legs with support beam.

▪ 10 year minimum warranty.

▪ High pressure laminate flip-top and nesting training table.

▪ Lockable hard floor casters.

▪ Include modesty panel at front and anti sag bar.

▪ Power & USB unit at center/front table.

▪ 3mm ABS edge banding to match work surface finish.

PROJECT #: 10362240

IFC CID BINDER

QUANTITY: 13

ITEM NAME: SHELVING, WIRE, FREESTANDING

MANUFACTURER (IMAGE)

Name: Global Industries Model #: WBB2297283

Contact: Wrigglesworth Enterprises inc

WWW.Wesourceusa.com Phone: 910-395-1904

GSA Contract Number GS-21F-0015X

Contract Duration October 27, 2020 - October 26, 2025 DIMENSIONS

SIN/FSC Overall Width: 48"

Overall Depth: 24"

Overall Height: 72"

FINISHES

Frame: Manufacturer: Global Industries Material: Steel Color: Gay

Shelf: Manufacturer: Global Industries Material: Wood solid deck

INSTANCES

ROOM NUMBER ROOM NAME

104 PARTS CAGE 13

TOTAL 13

ITEM CODE: S01

DESCRIPTION:

QUANTITY

▪ Heavy duty shelving with particle board shelves.

▪ 5 shelves and snap-on sleeves to secure shelves to posts.

Image is provided as basis of design. It is representational only and may differ from actual specification

5340/5120

3516 S College Rd Wilmington, NC 28412-0912

▪ Capacity of 1000-1800 lbs. per shelf.

▪ Boltless shelf assembly, snap into place

▪ Shelves capable of adjusting in 1 1/2" increments

▪ 1 year minimum warranty.

PROJECT #: 10362240

IFC CID BINDER

QUANTITY: 54

ITEM NAME: LOCKER, STORAGE

MANUFACTURER

Name: Global Industries Model #: WBB3142862

Contact: Wrigglesworth Enterprises inc

WWW.Wesourceusa.com Phone: 910-395-1904

GSA Contract Number GS-21F-0015X

Contract Duration October 27, 2020 - October 26, 2025 DIMENSIONS

SIN/FSC Overall Width: 15"

Overall Depth: 18"

Overall Height: 72"

FINISHES

Surface: Manufacturer: Global Industrial Material: Powder Coated Metal Color: Charcoal

INSTANCES

ROOM NAME

105 11

106 MEN'S LOCKER 31

112 LOCKER 12

TOTAL 54

3516 S College Rd Wilmington, NC 28412-0912

5340/5120

ITEM CODE: L01

Image is provided as basis of design. It is representational only and may differ from actual specification

DESCRIPTION:

▪ Constructed of 16 gauge steel.

▪ Powder-coated finish.

▪ Include a recessed lift-up handle and hasp for removable locks.

▪ 10 year minimum warranty.

▪ Sloped top.

▪ Closed bottom Lockers.

ROOM NUMNER QUANTITY

WOMEN'S LOCKER

Rev. 08MAR2023

BEST VALUE DETERMINATION FORM

Micro-Purchase Threshold - Simplified Acquisition Threshold

(Schedule Purchases are subject to FAR 8.4 and DFARS 208.4)

FAR 8.405-1 requires that a best value determination be performed prior to placing Multiple Award

Schedule (MAS) orders above the Micro Purchase Threshold (MPT).

FAR 8.405-2 (c)(2)(ii) requires the ordering activity shall provide the RFQ to at least three schedule contractors that offer services that will meet the agency’s needs.

DFARS PGI 208.602-70 and FAR 8.405-2 (c)(4) In addition, the RFQ must be provided to UNICOR for the opportunity to propose. The ordering activity shall provide the RFQ (including the statement of work and the evaluation criteria) to any schedule contractor who requests a copy of it.

(FAR 8.404(d)) Seek additional price discounts from the vendor offering the best value.

Project #/Name/Location: 10362240 / B1655 LO Shop Design / AFRC 301 Contracting, 1660

Lysons Dr., NAS JRB Fort Worth, TX 76127

1. Brief Description of Item(s), System(s) or Component(s) to be Procured:

Office furniture such as free-standing workstations, office desks, task chairs, stools, training tables, lockers, and shelving for storage.

2. Did you review inventories of the requiring activity? Provide a brief justification as to why new furnishings are required.

YES NO

3. Did you review excess from other agencies?

4. Was UNICOR included in the review? YES NO

5. Did you review Supplies on the Procurement List maintained by The Committee for Purchase from People

Who are Blind or Severely Disabled (Ability One)?

6. Did you review Government wholesale supply sources, such as stock programs of GSA?

7. Identify the GSA (SIN and Title) or other Federal Supply Schedule utilized or indicate not applicable.

8. List the name(s) and contract number(s) of vendor(s) who were considered:

List the vendors’ names, contract numbers (if applicable), business size and if the vendor proposed, formally declined, or no reply.

Vendor Contract # Business

Size

Proposed (P)

Declined (D)

No Reply (NR)

Add additional rows as required

Identify the vendor recommended as the best value.

9. Provide total price from recommended vendor’s original proposal.

10. When you sought additional price reductions, were they received? YES NO

11. Identify price with discounts from the recommended best value vendor. (This amount must match

TOTAL Government FF&E Final Cost from Final Cost Summary document.)

12. Identify all changes that impact price made to original vendor proposal between BVD and Final FF&E submittal.

13. Is installation, site preparation, design or ancillary services included in this project? YES NO

If yes, be sure that the installation, site preparation, design or ancillary services are included as separate line items in each quote.

14. Are you selecting the lowest priced item? YES NO

If no, indicate in addition to price, those factors listed below, considered in your decision.

Special features required in effective program performance:

Trade-in considerations

Probable life of the item selected as compared with that of a comparable item:

Warranty considerations:

Maintenance availability

Past performance

Environmental and energy efficiency considerations

Comfort/suitability of the item:

Delivery terms

Your administrative costs

Training needed or provided

Technical qualifications

Compatibility with existing furniture / Products / Technology (circle appropriate category)

Other (specify):

15. Best Value Determination:

A narrative justification for each box checked above for other than low price selection must be attached. Describe the evaluation factor, how the recommended best value vendor’s offer met or exceeded the standard for each factor, and why the offeror represents the best value to the Government compared to the other offerors.

SUBMITTING OFFICIAL (INTERIOR DESIGNER of RECORD)

In accordance with FAR 8.404(b), all agency specific regulations and statutes applicable to this purchase are attached. I have reviewed the findings and documentation attached and I have affirmatively determined them to be complete and accurate.

Name: Title:________________________________ Date:_________________

Telephone: ________________________ Email:

Signature:

Installation Name

Project Number: 10362240

B1655 LO SHOP DESIGN

BEST VALUE DETERMINATION FORM

SAMPLE BOARDS

FURNITURE PLAN

ELECTRICAL PLAN

TABLE OF CONTENTS

SAMPLE BOARDS

POINT OF CONTACT (POC) LIST

ITEMIZED FF&E COST ESTIMATE

ITEM CODE INDEX/INSTALLATION LIST

FF&E ORDER DATA SHEETS

IFC CID Binder

AFRC 301 Contracting, 1660 Lyons Dr., NAS JRB Fort Worth, TX 76127

Project Number: 10362240

IFC CID Binder

B1655 LO SHOP DESIGN

IFC DESIGN ANALYSIS

NAS JRB Fort Worth, TX 73127

CT01

CHAIR, TASK

FRAME: Manufacturer: Haworth Material: Molded Plastic Color: Fog LUMBAR: Manufacturer: Haworth Material: Molded Plastic Color: Fog MESH: Manufacturer: Haworth Material: Woven Striped Color: Onyx UPHOLSTERY: Manufacturer: Momentum Material: Row Color: Shale

09/28/2023

ST01

STOOL

FRAME: Manufacturer: Haworth Material: Molded Plastic Color: Fog UPHOLSTERY: Manufacturer: Luum Material: Monotex Color: Gray Marl

TT01

TABLE, TRAINING

SURFACE: Manufacturer: Wilsonart Material: High Pressure Laminate Color: Fashion Gray STORAGE: Manufacturer: Haworth Material: Powder Coated Metal Color: Smoke

D01a

DESK, STRAIGHT

SURFACE: Manufacturer: Wilsonart Material: High Pressure Laminate Color: Fashion Gray PANEL: Manufacturer: Haworth Name: English Tweed Color: 4E-XD Oxford-Grade B

D02

DESK, L-SHAPED

SURFACE: Manufacturer: Wilsonart Material: High Pressure Laminate Color: Fashion Gray PANEL: Manufacturer: Haworth Name: English Tweed Color: 4E-XD Oxford-Grade B

L01

LOCKERS

SURFACE: Manufacturer: Global Industries Material: Powder Coat Metal Color: Silver/Gray