Attachment 8 - B1655 SID Pkg.pdf

95% Design Analysis DDPM 20-0031: Repair F-35 LO Shops, B1655

2 | August 4, 2023

• 3-410-01 Heating, Ventilating, and Air Conditioning Systems

(2013, w/ Change 8 2021)

• 3-420-01 Plumbing Systems (2021)

• 3-600-01 Fire Protection Engineering for Facilities (2016, w/ Change 6 2021)

• 4-211-01 Aircraft Maintenance Hangars (2017, w/ Change 3 2021)

3 Architectural and Interiors

3.1 Design Approach

The architecture design approach is to accommodate the Phase 1 program of requirements within a revised Phase 1 area as efficiently as possible. The revised area now includes a portion of the original Phase 2 area where the restrooms and shower areas will be placed. A portion of the Phase 2 AMXS program will occupy the area designated for restrooms and showers in the original Phase 1. In addition, considerations will be made to successfully plan for forthcoming phases.

The interior design approach consists of refreshing all interior finishes and materials as described below in section 3.4 New Construction.

3.2 General Design Parameters and Assumptions

General design parameters center on renovation and remodeling areas within the current building envelope. Major masonry walls will be preserved as much as possible, but new openings are anticipated with the updated plan. Relative to the building envelope, the repair of the upper and lower roof areas is necessary due to the existing conditions

(leaks) observed.

Assumptions include that there is enough area delineated within the concept Phase 1 area to accommodate the assigned Phase 1 program of requirements and to allow for elements to be included that will support following phases. Also, the recommended roof system replacement should be accomplished prior to the start of interior work scope. The lower roof will require replacement to the next break in roof plane.

3.3 Demolition

Architectural demolition items will include portions of existing masonry walls, gypsum wall board, hollow metal doors and frames, overhead coiling door and frames, overhead hoist and track, portions of exterior insulated metal panel, and exterior windows. The existing roofing system will require demolition down to the structural deck.

At the interior, demolition will encompass existing porcelain tile flooring, ceramic tiled walls, gypsum board walls and ceilings, carpet and epoxy floors, base, window shades, removal of any existing cabinetry, and acoustical lay-in ceiling panels within the scope area in Phase 1. Demolition of existing ceilings will include areas outside of the Phase 1 area to allow for replacement of existing mechanical pipes and mains above ceiling.

3 Architectural and Interiors

3.1 Design Approach

The architecture design approach is to accommodate the Phase 1 program of requirements within a revised Phase 1 area as efficiently as possible. The revised area now includes a portion of the original Phase 2 area where the restrooms and shower areas will be placed. A portion of the Phase 2 AMXS program will occupy the area designated for restrooms and showers in the original Phase 1. In addition, considerations will be made to successfully plan for forthcoming phases.

The interior design approach consists of refreshing all interior finishes and materials as described below in section 3.4 New Construction.

3.2 General Design Parameters and Assumptions

General design parameters center on renovation and remodeling areas within the current building envelope. Major masonry walls will be preserved as much as possible, but new openings are anticipated with the updated plan. Relative to the building envelope, the repair of the upper and lower roof areas is necessary due to the existing conditions

(leaks) observed.

Assumptions include that there is enough area delineated within the concept Phase 1 area to accommodate the assigned Phase 1 program of requirements and to allow for elements to be included that will support following phases. Also, the recommended roof system replacement should be accomplished prior to the start of interior work scope. The lower roof will require replacement to the next break in roof plane.

3.3 Demolition

Architectural demolition items will include portions of existing masonry walls, gypsum wall board, hollow metal doors and frames, overhead coiling door and frames, overhead hoist and track, portions of exterior insulated metal panel, and exterior windows. The existing roofing system will require demolition down to the structural deck.

At the interior, demolition will encompass existing porcelain tile flooring, ceramic tiled walls, gypsum board walls and ceilings, carpet and epoxy floors, base, window shades, removal of any existing cabinetry, and acoustical lay-in ceiling panels within the scope area in Phase 1. Demolition of existing ceilings will include areas outside of the Phase 1 area to allow for replacement of existing mechanical pipes and mains above ceiling.

Existing shop equipment will be relocated from other parts of the property to within the main shop area and lean-to area.

95% Design Analysis

DDPM 20-0031: Repair F-35 LO Shops, B1655

August 4, 2023 | 3

Existing shop equipment will be relocated from other parts of the property to within the main shop area and lean-to area.

3.4 New Construction

New architectural items will include new masonry infill, new metal-framed gypsum board partitions (including acoustically enhanced and fire-rated types), new gypsum wall board ceilings and suspended acoustical ceilings, new overhead coiling door and frames, new hollow metal doors and frames, new door hardware, new interior hollow metal window frames, new fixtures and showers at lockers and restrooms, new drinking fountains, and new metal lockers. Additionally, an air shower shall be installed between Decon and

Locker. The building envelope will require a new roofing system over the Phase 1 area and beyond to the next break in the roof plane. Penetrations in exterior wall panels require closure with metal patching and/or silicone sealant depending on the size of the opening. The lean-to area at the north end of the building will require new penetrations to the PEMB envelope to allow for ducting of the new mechanical units. The existing exterior concrete ramp to the egress door at the lean-to area will be replaced with an accessible and compliant concrete ramp, steps and painted metal guardrails.

New interior finish items will include the following:

Floors: Epoxy floor coating, LVT, and porcelain tile.

Base: Epoxy (integral) base, rubber base at LVT, and tile base.

Walls: Painted gypsum board and wall tile.

Ceilings: Acoustical lay-in panels and suspension systems, and gypsum wall board ceilings in wet areas.

Other: New millwork, countertop surfaces, lockers, dressing benches, toilet and shower partitions, stainless steel toilet accessories, window treatments, stainless steel wall protection, windowsills, new paint on door frames and exposed structure elements.

4 Structural

4.1 Design Approach

The structural engineering for this project will be a support role that allows other disciplines to add, replace, or remove electrical or mechanical equipment. New plumbing lines are also anticipated that will require sections of the slab-on-grade to be removed and replaced.

4.2 General Design Parameters and Assumptions

The existing drawings for the building have been provided to the team. The existing drawings are called the Composite Maintenance Facility at Carswell Air Force Base dated August 1989. The roof structure is comprised of open web roof joists supported by interior wide flange girders and exterior concrete masonry unit (CMU) walls. The interior wide flange girders transmit the load to the foundation through wide flange columns. The

20018

20019

TEM

P

DEICING

PAD

Van C om ple x

ASSAULT RUNWAY

Fresnel Lens

NORTH APRON 160

16391632

33573358

3359 3361

41414145

41074106

O V

E R

R U

N

T A

X

IW

A Y

A

TA

X

IW

A Y A

TAXIW

AY 185

AIRCRAFT PARKING 166

SO

UTH A

PRO

N

TAXIW

AY 1

TAXIWAY 181

T A

X

IW

A Y

C

T A

X

IW

A Y

C

T A

X

IW

A Y

D

T A

X

IW

A Y

E

O V

E R

R U

N

NORTH−SOUTH PRIMARY/ INSTRUMENT

RUNWAY 130

74259

11941195

00 1

1519 1517

MK8

E28

6 6

1 99

65206513

65046500

TAXIW

AY 170

T A

X

IW

A Y

B

T A

X

IW

A Y

B

H A

IL

E

R D

PARALLEL TAXIWAY 197

W A

R M

U P

P A

D

W A

R M

U P

P A

D

APRO

N 8

(5

P

AR

KIN

G

STUBS)

WARM UP PAD

APRO

N 7

(1

PARKIN

G

STUBS)

ELECT

SUB

STATION

3321 3325

N

EW

ADD

ITIO

N

NEWADDITION

NEW

ADD

N

EW

ADDIT

IO

N

F arm ers B ranch

Trin ity

Rive r

Lake Worth

S ta te H ig h w a y 1

N

IM

IT

Z

D R

IV

E

H E

R C

U L

E S

R D

B O

Y

IN

G

TO

N

D R

DESERT STORM

ROAD D

A

V

IS

O N

D R

A R

N O

L D

A V

E

S U

P P

L Y

A V

E

LOGISTICS AVE

WAREHOUSE AVED

E

P O

T A

V E

N U

E

HALSEY ST

BU

RKE A

VEN

UE

D O O

LI

TTLE

A

VENUE

VANDENBURG

AVE

EIS

ENHO

W

ER A

VE

CARSW

ELL AVENUE

H E N

S

LE

Y D

R

IV

E

M

EA

N D

I N G

ER

R

OA

D

HULK AVE

H O

R N

E T

C T

T O

M C

A T

A V E

F A

L C

O N

A V

E

R A

N G

E R

D

SAM GARR DR

MILITARY

PKWY

DESERT STORM RD

MILITARY

PKWY

CI RCL E

P

HI

L LI PS

PUMPHREY DRIVE

ETT

H O

R N

E T

C T

Paine Lane

T H

U N

D E R

C H

IE

F

LN

G C

H O

W E

L L

W A

Y

CUTTS WAY

C H

E N

N A

U L T

HEADQUARTERS AVE

D O

O L

IT

L E

A V

E

Mr.G’s

Mr.G’s

NEXTEL

TOW

ER

& BLDG

INDEX OF DRAWINGS

NUMBERING SYSTEM:

XX-100

DISCIPLINE:

A - ARCHITECTURE

C - CIVIL

I - INTERIOR

F - FIRE PROTECTION

M - MECHANICAL

E - ELECTRICAL

P - PLUMBING

S - STRUCTURAL

T - TELECOMMUNICATIONS

DISCIPLINE MODIFIER

REFER TO A/E/C CAD STANDARD FOR

SHEET NUMBERINGSTANDARDS

SHEET NUMBER WITHIN SERIES

HAUL ROUTE IN

HAUL ROUTE OUT

S O

L

IC

IT

A

T

IO

N N

O

F

IL

E N

A M

E

D W

N B

Y

C K

D B

Y

D E

S

IG

N E

D B

Y

D E

S C

R

IP

T

IO

N

D

2 3

C

4 5

A

B

M A

R K

A P

P R

D A

T E

F

IL

E N

U M

B E

R

S

IZ

E

S U

B M

IT

T

E D

B Y

P L O

T S

C A

L E

IS

S U

E D

A T

E

D A

T E

C O

N T

R A

C T

N O

A N

S I

D

F A

F

A F

R C

C o n tr a c ti n g

L y o n s D r.

N

A S

J R

B

F o rt W o rt h T

X

B L

O S

H O

P

E

S

IG

N

SHEET

NUMBER

H D

R E

N G

IN

E

E R

IN

G

IN

C

N

W L

O O

P

S

U

IT

E

S A

N A

N T

O N

IO

T E

X A

S

T e x a s P

.E

F ir m R e g is tr a ti o n

N o

F -7

H D

R

A S

N O

T E

D

F A

D

F A

C

E

A W

IS

S

U E

D F

O R

C O

N S

T R

U C

T

IO

N

IS

S

U E

D F

O R

C O

N S

T R

U C

T

IO

N

/2

/2

T

R

C O

V E

R S

H E

E T

G-001

/2

/2

C Z

C Z

A M

AFRC 301 Contracting, 1660 Lyons Drive, NAS JRB Fort Worth, Texas 76127

B1655 LO SHOP DESIGN

SOLICITATION NUMBER: FA667523F0003

CONTRACT NUMBER: FA664318D0009

FILE NUMBER: F5A6CE2292AW02

PROJECT NUMBER: 10362240

ISSUED FOR CONSTRUCTION

09/28/2023

SITE LOCATION

VICINITY MAP & HAUL ROUTE NOT TO SCALE

N

SHEET INDEX

SHEET

NUMBER SHEET NAME IS

S U

E D

F O

R C

O N

S T

R U

C T

IO

N

GENERAL

G-001 COVER SHEET X

G-002 PROJECT INFORMATION, ABBREVIATIONS X

G-100 CODE ANALYSIS X

G-101 LIFE SAFETY PLAN X

CIVIL

C-001 CIVIL TEMPORARY SECURITY FENCE AND

CONTRACTOR LAYDOWN AREA

X

ARCHITECTURAL

AD-101 FLOOR PLAN - DEMOLITION X

AD-102 REFLECTED CEILING PLAN - DEMOLITION X

AD-201 ELEVATIONS - DEMOLITION X

A-101 FLOOR PLAN X

A-102 REFLECTED CEILING PLAN X

A-103 ROOF PLAN X

A-201 EXTERIOR ELEVATIONS X

A-202 INTERIOR ELEVATIONS X

A-301 WALL SECTIONS X

A-401 ENLARGED RESTROOM PLAN X

A-530 WALL DETAILS X

A-531 WALL DETAILS X

A-535 SHOWER DETAILS X

A-601 DOOR SCHEDULE AND DETAILS X

A-720 STD PARTITION TYPES X

A-722 PARTITION FRAMING DETAILS X

A-730 TOILET MOUNTING DIAGRAM X

A-731 INTERIOR CASEWORK STANDARDS X

A-732 INTERIOR CASEWORK STANDARDS X

STRUCTURAL

S-001 GENERAL STRUCTURAL NOTES X

S-101 FIRST FLOOR SLAB PLAN X

S-102 INTERMEDIATE LEVEL FRAMING PLAN X

S-301 STRUCTURAL DETAILS X

S-302 STRUCTURAL DETAILS X

INTERIORS

I-001 INTERIOR FINISH LEGEND AND ROOM FINISH

SCHEDULE

X

I-101 INTERIOR FINISH PLAN X

I-201 INTERIORS FURNITURE PLAN X

FIRE PROTECTION

F-001 FIRE PROTECTION GENERAL NOTES X

FD-101 FIRE ALARM PLAN - DEMOLITION X

FD-102 FIRE PROTECTION PLAN - DEMOLITION X

FA-101 FIRE ALARM AND MASS NOTIFICATION PLAN -

NEW WORK

X

FA-501 FIRE ALARM AND MASS NOTIFICATION DETAILS X

FP-101 FIRE PROTECTION PLAN - NEW WORK X

FP-501 FIRE PROTECTION DETAILS X

SHEET INDEX

SHEET

NUMBER SHEET NAME IS

S U

E D

F O

R C

O N

S T

R U

C T

IO

N

PLUMBING

P-001 PLUMBING LEGEND X

PD-102 PLUMBING DEMOLITION ABOVE FLOOR PLAN X

PD-101 PLUMBING DEMOLITION UNDERFLOOR PLAN X

P-101 PLUMBING PLAN X

P-102 PLUMBING ENLARGED PLAN X

P-103 PLUMBING ENLARGED PLAN X

P-104 PLUMBING COMPRESSED AIR AND VACUUM PLAN X

P-401 PLUMBING RISERS X

P-501 PLUMBING DETAILS X

P-502 PLUMBING DETAILS X

P-601 PLUMBING SCHEDULES X

P-602 PLUMBING SCHEDULES X

MECHANICAL

M-001 MECHANICAL GENERAL NOTES, ABBREVIATIONS X

MD-101 HVAC DEMOLITION PLAN X

MD-102 HVAC ROOF PLAN - DEMOLITION X

MPD-101 MECHANICAL PIPING PLAN - DEMOLITION X

M-101 HVAC PLAN - NEW WORK X

M-102 HVAC ROOF PLAN - NEW WORK X

MP-101 MECHANICAL PIPING PLAN - NEW WORK X

MP-201 MECHANICAL PIPING ENLARGED PLAN X

M-501 HVAC DETAILS X

M-502 HVAC DETAILS X

M-601 HVAC SCHEDULES X

M-602 HVAC SCHEDULES X

M-603 HVAC SCHEDULES X

M-604 HVAC SCHEDULES X

M-701 FLOW DIAGRAM X

M-702 FLOW DIAGRAM X

M-800 CONTROLS GENERAL NOTES, ABBREVIATIONS X

M-801 CONTROL DIAGRAMS X

M-802 CONTROL DIAGRAMS X

M-803 CONTROL DIAGRAMS X

M-804 CONTROLS DIAGRAMS X

M-805 CONTROL POINTS X

M-806 CONTROL POINTS X

ELECTRICAL

E-001 ELECTRICAL SYMBOLS AND ABBREVIATIONS X

ED-101 FIRST FLOOR ELECTRICAL DEMOLITION PLAN X

E-101 LIGHTING PLAN X

E-110 POWER PLAN X

E-111 POWER PLAN - EXISTING ELEC ROOM X

E-112 POWER PLAN - ROOF PLAN X

E-113 POWER PLAN - MECHANICAL EQUIPMENT X

E-501 ELECTRICAL DETAILS X

E-601 ONE-LINE DIAGRAM X

E-701 ELECTRICAL PANELBOARD SCHEDULES X

E-801 ELECTRICAL SCHEDULES X

TELECOMMUNICATIONS

T-001 TELECOMMUNICATIONS NOTES & LEGEND X

T-101 TELECOMMUNICATION PLAN X

T-401 TELECOMMUNICATION ENLARGED - TR X

T-402 TELECOMMUNICATION TR ELEVATIONS X

T-501 TELECOMMUNICATION DETAILS X

YOU ZHOU

2 7 6 7 3

09/28/2023

INTERIOR FINISH GENERAL

NOTES

1. REFER TO ASSOCIATED SPECIFICATION SECTION FOR

DETAILED INFORMATION.

2. IF FINISH CODE IS NOT SPECIFIED (--), NO FIELD FINISH IS

APPLIED. REFER TO CORRESPONDING SPECIFICATION

SECTION. IF MANUFACTURER FINISH IS SPECIFIED (MFR),

REFER TO CORRESPONDING SPECIFICATION SECTION

3. ANY COLOR SUBSTITUTE SHALL BE REQUESTED TO THE

ARCHITECT. REFER TO DIVISION 1 REQUIREMENTS.

4. CONSISTENT MATERIAL COLORS AND PATTERN SHALL BE

PROVIDED. PROVIDE MATERIALS FROM SAME PRODUCT RUN.

5. WHERE ITEMS OR SURFACES ARE NOT SPECIFICALLY

MENTIONED, PAINT THE SAME AS SIMILAR ADJACENT

MATERIALS OR AREA. IF COLOR OF FINISH IS NOT

DESIGNATED, ARCHITECT WILL SELECT FROM STANDARD

COLORS OR FINISHES AVAILABLE.

6. UNLESS OTHERWISE INDICATED, DO NOT PAINT FACTORY-

FINISHED OR INSTALLER-FINISHED ITEMS.

7. GRILL, DIFFUSERS, ELECTRICAL PANELS, ACCESS PANELS,

ETC. WICH ARE EXPOSED IN FINISHED SPACES SHALL BE

PAINTED TO MATCH THE SURFACE ON WHICH THEY OCCUR.

8. PAINT INTERIOR SURFACES OF DUCTS LOW VOC BLACK

WHERE SURFACES ARE VISIBLE THROUGH GRILLES AND

DIFFUSERS.

9. ALL INTERIOR FINISHES SHALL BE INSTALLED PER

MANUFACTURER'S RECOMMENDATION. INSTALLER SHALL BE

QUALIFIED TO INSTALL SPECIFIC FINISH MATERIAL AND HAVE

EXPERIENCE WITH PROJECTS OF SIMILAR SIZE AND

COMPLEXITY.

10. ALL FLOORING TYPE TRANSITIONS AT DOORS SHALL OCCUR

ON THE CENTERLINE OF THE DOOR LEAF. TRANSITION TO BE

SMOOTH AND EVEN. MAXIMUM VERTICAL CHANGE IN

ELEVATION SHALL BE 1/4 IN. REFER TO SPECIFICATIONS FOR

REQUIRED FLOOR TRANSITION TRIMS.

11. EXTEND FLOORING UNDER LAV/SINK BASE CABINETS AND

OPEN KNEE SPACE.

12. CASEWORK TOE-KICK HEIGHT TO MATCH BASE HEIGHT IN

ROOM.

13. ALL WOOD-LOOK PLASTIC LAMINATE CASEWORK SHALL RUN

VERTICALLY.

S O

L

IC

IT

A

T

IO

N N

O

F

IL

E N

A M

E

D W

N B

Y

C K

D B

Y

D E

S

IG

N E

D B

Y

D E

S C

R

IP

T

IO

N

D

2 3

C

4 5

A

B

M A

R K

A P

P R

D A

T E

F

IL

E N

U M

B E

R

S

IZ

E

S U

B M

IT

T

E D

B Y

P L O

T S

C A

L E

IS

S U

E D

A T

E

D A

T E

C O

N T

R A

C T

N O

A N

S I

D

F A

F

A F

R C

C o n tr a c ti n g

L y o n s D r.

N

A S

J rt W o rt h T

X

B L

O S

H

S

IG

N

SHEET

NUMBER

H D

R E

N G

IN

E

E R

IN

G

IN

C

N

W L

O O

P

S

U

IT

E

S A

N A

N T

O N

IO

T E

X A

S

T e x a s P

.E

F ir m R e g is tr a ti o n

N o

F -7

H D

R

A S

N O

T E

D

F A

D

F A

C

E

A W

IS

S

U E

D F

O R

C O

N S

T R

U C

T

IO

N

IS

S

U E

D F

O R

C O

N S

T R

U C

T

IO

N

/2

/2

T

R

IN

T

E R

IO

R

F

IN

IS

H

L E

G E

N D

A N

D R

O O

M F

IN

IS

H S

C H

E D

U L

E

I-001

/2

/2

P C

P C

A M

I-001s - INTERIOR FINISH LEGEND

CODE MANUFACTURER SERIES/STYLE COLOR SIZE COMMENTS

03 30 53 MISCELLANEOUS CAST-IN-PLACE CONCRETE

CFSHD SEE SPECIFICATION -- -- -- --

06 41 16.00 10 PLASTIC-CLAD ARCHITECTURAL CABINETS

PL1 WILSONART 12 SOFT GRAIN FAWN CYPRESS -- --

PL2 FORMICA MATTE FINISH 2770-58 SARUM GREY

06 61 16 SOLID FABRICATIONS

SSF1 CORIAN SOLID SURFACE ARTISTA DUST -- RESTROOM COUNTERTOP

SSF2 CORIAN SOLID SURFACE DEEP CLOUD -- THRESHOLD

09 30 10 CERAMIC, QUARRY, AND GLASS TILING

T1 DALTILE FLAT IRON 12" X 24" FLOOR TILE. MAPEI KERAPOXY

GROUT IN COLOR 107 IRON

T2 DALTILE VERTUO MAESTRO VR10 12" X 24" WALL TILE. MAPEI KERAPOXY

GROUT IN COLOR 93 WARM

GRAY

T2b DALTILE VERTUO MAESTRO VR10 6" X 12" WALL TILE BASE. MAPEI

KERAPOXY GROUT IN COLOR

93 WARM GRAY

T3 DALTILE STAGECRAFT KALEIDOSCOPE MOSAIC ARCTIC WHITE 6" X 6" MOSAIC ACCENT TILE. MAPEI

KERAPOXY GROUT IN COLOR

00 WHITE

TT1 SCHLUTER QUADEC-K CLEAR ANODIZED -- OUTSIDE CORNERS METAL

TRIM AT T2 WALL TILE

TT2 SCHLUTER DILEX-AHK CLEAR ANODIZED -- COVE SHAPED METAL TRIM IN

RESTROOMS

09 51 00 ACOUSTICAL CEILINGS

ACT1 ARMSTRONG CALLA HIGH NRC #2844 WHITE 2'X2' SQUARE LAY-IN 15/16" GRID

09 65 00 RESILIENT FLOORING

RB1 ROPPE PINNACLE CHARCOAL 4" --

RFT1 NORA NORAPLAN ENVIRONCARE 7042 STAR GAZING 24,015" X

24.015"

09 67 23.16 FUEL RESISTIVE RESINOUS FLOORING, 5-COAT SYSTEM

RF1 STONHARD STONCHEM 400 STONCHEM GRAY -- --

09 90 00 PAINTS AND COATINGS

PT1 SHERWIN WILLIAMS LATEX / EGGSHELL 7035 AESTHETIC WHITE -- --

PTD1 SHERWIN WILLIAMS DRYFALL PAINT 7035 AESTHETIC WHITE -- EXPOSED STRUCTURE IN MAIN

SHOP

PTE1 SHERWIN WILLIAMS EPOXY / EGGSHELL 7035 AESTHETIC WHITE -- --

PTE2 SHERWIN WILLIAMS EPOXY / FLAT 7005 PURE WHITE -- GWB CEILINGS

PTM1 SHERWIN WILLIAMS PAINT TO METAL / SEMI-GLOSS 7515 HOMESTEAD BROWN -- HOLLOW METAL DOOR &

WINDOW FRAMES

09 96 00 HIGH PERFORMANCE COATINGS

HPC1 STONHARD STONGLAZE VSD BLUE MIST -- AIR SHOWER AND DECON

WALLS

10 26 00 WALL AND DOOR PROTECTION

CG1 CS GROUP HEAVY DUTY RUBBER CORNER GUARD, HC100C BLACK EPDM 3 15/16" LEGS --

10 28 13 TOILET ACCESSORIES

SC1 CS GROUP MYSTERY WHITE -- --

ROOM FINISH SCHEDULE

NUMBER ROOM NAME FLOOR FINISH BASE FINISH WALL FINISH

CEILING

FINISH Area

100 MAIN SHOP RF1 RF1 PTE1 PTD1 3862 SF

101 TRAINING RFT1 RB1 PT1 ACT1 673 SF

102 OFFICE RFT1 RB1 PT1 ACT1 210 SF

103 TOOL CRIB CFSHD RB1 PT1 -- 887 SF

104 PARTS CAGE CFSHD RB1 PT1 -- 511 SF

105 WOMEN'S LOCKER RFT1 RB1 PT1 PTE2 115 SF

106 MEN'S LOCKER RFT1 RB1 PT1 PTE2 298 SF

107 WOMEN T1 T2b T2,T3,PTE1 PTE2 217 SF

107-1 WOMEN T1 T2b T2, PTE1 PTE2 52 SF

108 MEN T1 T2b T2,T3,PTE1 PTE2 449 SF

108-2 MEN T1 T2b T2, PTE1 PTE2 150 SF

109 JAN CFSHD RB1 T2, PTE1 PTE2 27 SF

110 COMM CFSHD RB1 PT1 PTE2 111 SF

111 TLT T1 T2 T2,PTE1 PTE2 58 SF

112 LOCKER RFT1 RB1 PTE1 PTE2 140 SF

113 VEST RFT1 RB1 PTE1 PTE2 62 SF

114 AIR SHWR RF1 RF1 HPC1 PTE2 27 SF

115 DECON RF1 RF1 HPC1 PTE2 112 SF

116 CLEAN ROOM RF1 RF1 PTE1 PTE2 605 SF

117 LOASM CFSHD RB1 PT1 -- 301 SF

118 CNC CFSHD RB1 PT1 -- 302 SF

119 MT/A RF1 RF1 PTE1 -- 943 SF

120 SHOP WORK AREA -- -- PTE1 -- 2289 SF

121 CORR. RF1 RB1 PT1 79 SF

132 MECHANICAL ROOM -- RB1 PTE1 -- 501 SF

138 EXISTING CORRIDOR -- -- PT1 -- 811 SF

E103 EXIST COMM -- -- -- -- 282 SF

E104 EXIST ELEC -- -- -- -- 233 SF

YOU ZHOU

DN

INTERIOR FINISH

PLAN LEGEND

SHEET KEYNOTES

I1

ROOM

NAME

FLOOR

BASE

WALL

NOTE:

REFER TO INTERIOR FINISH LEGEND

SHEET

I-001 FOR FINISH CODES AND

DESCRIPTION OF MATERIALS.

ROOM NUMBER

FLOOR FINISH

BASE FINISH

NOT IN CONTRACT

XXXX

WALL FINISH

WALL ACCENT

FINISH ABBREVIATIONS:

CFSHD MISCELLANEOUS CAST-IN-PLACE

CONCRETE

CG CORNER GUARD

HPC HIGH PERFORMANCE COATING

PL PLASTIC LAMINATE

PT PAINT, LATEX

PTE PAINT, EPOXY

PTM PAINT, METAL DOORS AND

FRAMES

RB RUBBER BASE

RF FULE RESISTIVE RESINOUS

FLOORING

RT RESILIENT TILE FLOORING

SSF SOLID SURFACE FABRICATIONS

T TILE

EXISTING CORRIDOR TO RECEIVE NEW PAINT

ON WALLS. ALL OTHER FINISHES REMAIN

EXISTING.

IX

I1

1 3 4 5 6 7

B

D

A

C

E

8 9

10 11

CNC

CFSHD

RB1

PT1

SHOP

WORK

AREA

PTE1

LOASM

CFSHD

RB1

PT1

MT/A

RF1

RF1

PTE1

MAIN

SHOP

RF1

RF1

PTE1

TRAINING

RFT1

RB1

PT1

OFFICE

RFT1

RB1

PT1

TOOL

CRIB

CFSHD

RB1

PT1

CLEAN

ROOM

RF1

RF1

PTE1

DECON

RF1

RF1

HPC1

MEN'S

LOCKER

RFT1

RB1

PT1

PARTS

CAGE

CFSHD

RB1

PT1

MECHANICAL

ROOM

RB1

PTE1

JAN

CFSHD

RB1

T2, PTE1

MEN

T1

T2b

T2,T3,PTE1

WOMEN

T1

T2b

T2,T3,PTE1

EXISTING

CORRIDOR

PT1

WOMEN'S

LOCKER

RFT1

RB1

PT1

COMM

CFSHD

RB1

PT1

LOCKER

RFT1

RB1

PTE1

VEST

RFT1

RB1

PTE1

AIR

SHWR

RF1

RF1

HPC1

I1

TLT

T1 T2

T2,PTE1

T

T

T

CG1

CG1

CG1CG1 CG1CG1 CG1

CG1 CG1

CG1

E X

IS

T

T

T

E X

IS

T

EXIST

T1

MEN

108-2 T1 T2b

T2, PTE1

WOMEN

107-1 T1 T2b

T2, PTE1

CORR.

RF1

RB1

PT1

S O

L

IC

IT

A

T

IO

N N

O

F

IL

E N

A M

E

D W

N B

Y

C K

D B

Y

D E

S

IG

N E

D B

Y

D E

S C

R

IP

T

IO

N

D

2 3

C

4 5

A

B

M A

R K

A P

P R

D A

T E

F

IL

E N

U M

B E

R

S

IZ

E

S U

B M

IT

T

E D

B Y

P L O

T S

C A

L E

IS

S U

E D

A T

E

D A

T E

C O

N T

R A

C T

N O

A N

S I

D

F A

F

A F

R C

C o n tr a c ti n g

L y o n s D r.

N

A S

J rt W o rt h T

X

B L

O S

H

S

IG

N

SHEET

NUMBER

H D

R E

N G

IN

E

E R

IN

G

IN

C

N

W L

O O

P

S

U

IT

E

S A

N A

N T

O N

IO

T E

X A

S

T e x a s P

.E

F ir m R e g is tr a ti o n

N o

F -7

H D

R

A S

N O

T E

D

F A

D

F A

C

E

A W

KEYPLAN

PLAN NORTH

IS

S

U E

D F

O R

C O

N S

T R

U C

T

IO

N

IS

S

U E

D F

O R

C O

N S

T R

U C

T

IO

N

/2

/2

T

R

IN

T

E R

IO

R

F

IN

IS

H

P L

A N

I-101

/2

/2

P C

P C

A M

3/32" = 1'-0"1

FIRST FLOOR PLAN

YOU ZHOU

MRP1

07 41 13

MANUFACTURER: BERRIDGE

SERIES/STYLE: KAYNAR 500 OR HYLAR 5000

COLOR: MEDIUM BRONZE

FWP1

07 42 63

MANUFACTURER: CENTRIA

SERIES/STYLE: VERSA WALL V

COLOR: 992 LEE IVORY

PL1

06 41 16.00 10

MANUFACTURER: WILSONART

SERIES/STYLE: 12 SOFT GRAIN

COLOR: FAWN CYPRESS

PL2

06 41 16.00 10

MANUFACTURER: FORMICA

SERIES/STYLE: MATTE FINISH

COLOR: 2770-58 SARUM GREY

SSF1

06 61 16

MANUFACTURER: CORIAN

SERIES/STYLE: SOLID SURFACE

COLOR: ARTISTA DUST

SSF2

06 61 16

MANUFACTURER: CORIAN

SERIES/STYLE: SOLID SURFACE

COLOR: DEEP CLOUD

T1 09 30 10

MANUFACTURER: DALTILE

SERIES/STYLE: FLAT

COLOR: IRON

SIZE: 12” X 12”

T2, T2b

MANUFACTURER: DALTILE

SERIES/STYLE: VERTUO

COLOR: MAESTRO VR10

SIZE: 12” X 24”

T3

MANUFACTURER: DALTILE

SERIES/STYLE: STAGECRAFT KALEIDOSCOPE

COLOR: ARCTIC WHITE

SIZE: 6” X 6”

TT1

MANUFACTURER: SCHLUTER

SERIES/STYLE: QUADEC-K

COLOR: CLEAR ANODIZED

TT2

MANUFACTURER: SCHLUTER

SERIES/STYLE: DILEX-AHK

COLOR: CLEAR ANODIZED

ACT1

09 51 00

MANUFACTURER: ARMSTRONG CEILINGS

SERIES/STYLE: CALLA HIGH NRC, #2844;

SQUARE LAY-IN 15/16” GRID

COLOR: WHITE

RB1

09 65 00

MANUFACTURER: ROPPE

SERIES/STYLE: PINNACLE

COLOR: CHARCOAL

RFT1

09 65 00

MANUFACTURER: NORA

SERIES/STYLE: NORAPLAN ENVIRONCARE 7042

COLOR: STAR GAZING

SIZE: 49.21’ x 48”

RF1

09 67 23.15

MANUFACTURER: STONHARD

SERIES/STYLE: STONCHEM 400

COLOR: STONCHEM GRAY

PT1, PTE1, PTD1

09 90 00

MANUFACTURER: SHERWIN WILLIAMS

SERIES/STYLE: LATEX, EPOXY / EGGSHELL

COLOR: 7036 AESTHETIC WHITE

PTE2

MANUFACTURER: SHERWIN WILLIAMS

SERIES/STYLE: EPOXY / FLAT

COLOR: 7005 PURE WHITE

PTM1

MANUFACTURER: SHERWIN WILLIAMS

SERIES/STYLE: PAINT TO METAL/SEMI-GLOSS

COLOR: 7515 HOMESTEAD BROWN

HPC1

09 96 00

MANUFACTURER: STONHARD

SERIES/STYLE: STONGLAZE VSD

COLOR: BLUE MIST

CG1

10 26 00

MANUFACTURER: CS GROUP

SERIES/STYLE: HEAVY DUTY CORNER GUARD,

HC100C

COLOR: BLACK EPDM

SC1

10 28 13

MANUFACTURER: CS GROUP

SERIES/STYLE: MYSTERY

COLOR: WHITE