Vendor Questions.docx

Vendor Questions

Q1: Is there a specific make / mode of the cameras you like to use?

A1: No specific make/model. They just need to be in compliance with the Salient Characteristics.

Q2: Will we need a lift for the gymnasium cameras?

A2: The 4 cameras in the gymnasium and 1 Camera in the weightroom are above 15’. You will be responsible for any equipment required to access these points for removal and installation of cameras.

Q3: Is there existing Cat6 run to the (17) cameras?

Q3: No, the existing cabling is Coaxial analog signal.

Q4: SOW Line Item 3, Qty 16 Security Cameras, dome style or similar. a. Minimum resolution of 8MP. - Do you want all indoor rated cameras, or would that be acceptable?

Q4: The 16 indoor cameras are fine at an indoor rating.

Q5: SOW Line Item 4b, shall be rated for outdoor use, IP65, IP66 or IP67. What resolution is required for this camera, and will it be wall mounted?

Q5 For the outdoor camera, a higher outdoor rating would probably be a good idea for Minnesota weather extremes, and a higher 12MP resolution for the larger outdoor view. It is mounted in the overhead.

Q6: SOW Line Item 10, Contractor shall properly dispose of any discarded equipment associated with the system replacement. How many cameras need to be removed?

Q6: 17 cameras need to be removed.

Q7: The SOW states:

1. Qty 1 NVR - with the capability to record a minimum of 18 channels.

a. Minimum 4TB Hard drive.

b. Supports up to 30 days’ non-cloud-based storage capability.

Question, will it be acceptable to install a unit with 4TB of storage if it does not provide 30 days of storage as long as it has the capability to add more, or does the storage need to be configured to record 30 days upon the initial installation?

Q7: The requirement is to be able to store up to 30 days when it’s installed.

Q8: Do we know what the existing equipment is, and whether the wiring to the existing cameras is IP or analog? The vendor is asking this to determine whether new CAT cabling will need to be run to each camera.

Q8: The existing equipment is Honeywell Camera Ball, 4MP HQA, IR, 3.6MM, 12VDC, NTSC, 160' Night Vision. The existing wiring is Coaxial analog signal.

Q9: Do you have an allocated budget or a maximum budget limit that the camera system project needs to remain within?

Q9: This is a funded solicitation. We are not at liberty of advising what the estimated cost is for this contract.

Q10: What is your required installation date or target completion date for the new camera system?

Q10: ASAP, by the end of July

Q11: Would it be possible for the vendor/installer to perform a site walkthrough of the facility to evaluate installation requirements, determine the amount of cabling/wiring needed, and accurately estimate labor costs?

Q11: A site visit is scheduled for June 23, 2026, at 10:00AM. If you are interested in attending, provide the following information for all planned attendees: Full Name (Last, First, Middle), Date of Birth, DL # and State of Issuance US Citizenship Yes or No

Q12: Will there be an existing General Contractor or site representative that the camera installation team will coordinate with during the project?

Q12: Yes, there will be Contracting Officer Representative (COR) who the contractor will coordinate with during the project. The Contracting Officer will be available for any questions/issues related to the contract terms and conditions.

Q13: Is there an existing camera system, network infrastructure, power supply, or cabling that will be reused as part of this project?

Q13: A new power supply should come with any NVR system, all of the cameras will be power over ethernet, so they don't have power supplies. The power in a PoE system comes from the network switch, in this case the NVR system with at least 18 ethernet channels. The power supply for the NVR covers the cameras that are plugged in. This system will be separate from the AFNet, so any existing network cables won't be usable for the cameras as the NVR will not be connected to AFNet.

Q14: Are there any site-specific requirements, access restrictions, security clearance requirements, working hour limitations, or installation guidelines that the vendor should consider?

A14: All personnel requiring access to base will need to be validated through the EAL process. No security clearance requirements. Working hours are 0700-1600 Monday – Friday the contractor will have access to the building during these hours.

Q15: Please confirm if there are any specific requirements for camera coverage areas, recording duration, storage capacity, remote monitoring, or security features that must be included in the quotation.

Q15: Please refer to the Attch 1 Salient Characteristics Security Cameras

Q9: Is there an AV or low voltage portion to the project? I work for XXX and we are a low voltage contractor that can provide AV, security, low voltage wiring and networking equipment.

Q9: I'm not sure what they mean by low voltage. This is all Power over Ethernet, which I believe is a different category than what you are describing. We don't want wiring just for power, that's what the Cat5 ethernet is for here, it reduces the complexity.