Attachment_7_Quality_Control_Checklist.pdf

Contract Order # evaluated:___________________________________________ Page 1/3 Manufacturer / Model evaluated:______________________________________ Date:________________

Line Evaluation Criteria: MEET

NOT

MEET

REMARKS

Style moderately scaled with modern style (simple lines or rounded profiles), free of ornamentation similar in appearance to match other furnishings items § 5.2

All items similar in appearance and construction and compatible in usage (i.e.. chairs to fit with tables, under bed units match bedframes etc.) § 5.2

Item dimensions meet outlined sizes § 9.1 through § 9.31 and/or within allowable tolerance per § 5.5.2

Material in compliance with Specifications "first" quality goods § 5.5; § 5.6; § 5.7 (i.e. No particle board or medium density fiberboard (MDF) )

5 Corpus and construction build to meet heavy duty use § 5.2; § 5.7

Compliance of item constructive parts with specifications (side/back/other panels § 5.8 - § 5.10; doors § 5.11; tops § 5.12; dust shields§ 5.13; shelves § 5.14;

Drawers § 5.15; Drawer guides § 6.3 meet specifications (i.e. Drawers shall open to their full length 100% and guides meet to outlined weight features)

Chest of Drawers will stand stable without tilting forward when all loaded drawers are open § 5.15

Integral or recessed hardware pulls that do not protrude from the face of the door or drawer. § 5.2 Drawer and Door Pulls in accordance with § 6.6

10 Hinges § 6.7; / Metal part § 7.1 meet spelled our characteristics

ITEM NOMENCLATURE / CLIN:___________________________________________________________ /___________

Contract Order # evaluated:___________________________________________ Page 2/3

Line Evaluation Criteria: MEET

NOT

MEET

REMARKS

11 Documentation to verify quality and safety along with industrial testing for moveable parts § 5.4

12 Furniture shall be movable by lifting and handling the piece by the top. § 5.12

For removing table legs no tools should be required; wing nuts screws shall be used. § 5.17

14 When applicable edges or borders require minimum 2mm thick ABS § 5.7

Color to be consistent the same both inside and out and to match other furnishings items.

§ 5.1

All surfaces need to be scratch resistant water proof and sunlight color resistant, non-fading § 5.1

All surfaces must be polished, sealed and smooth to the touch to pass a wipe test with a cotton-wool ball. A cotton-wool ball wipe test consist of testing the furniture for consistency in smoothness. No cotton-wool material shall be stuck to the furniture after the cotton wool has been wiped across the surface on the furniture § 5.1

18 Leveling glides in accordance with § 6.4

19 Metal parts meet § 7.1 / Finish and Painting meet § 7.2

Contract Order # evaluated:___________________________________________ Page 3/3

Line Evaluation Criteria: MEET

NOT

MEET

REMARKS

All Upholstery is neatly tailored with smooth, uniform exposed surfaces without blisters, pits, wrinkles, runs, tackiness or orange peel appearance § 8.1 and to meet heavy wear conditions § 8.4: § 8.5

21 Fabric finish stain and moisture / water resistance § 8.3

All Upholstery / fabrics meet fire / flammable resistance § 8.2 and country specific markings § 8.10

23 Documentation to verify quality of fabric surface abrasion industrial testing § 8.3

Furniture cushioning be "No-Sag" type offering adequate seating comfort § 8.6; § 8.7; § 8.8; § 8.9

Any inspection findings noted for non-compliance towards specification salient features not mentioned above (explain in remarks)

Over all rating: Printed Names of evaluators / Signatures ACCEPTABLE, within full compliance

ACCEPTABLE, with minor comments provided in separate document

NOT ACCEPTABLE, due to minor discrepancies

NOT ACCEPTABLE, due to major discrepancies

Date / Location:________________________________

Checklist