Atch_2_PWS_OHDAOD-Revised_30_May_18.pdf

FA5613-18-R-0007

ATTACHMENT 2

PERFORMANCE WORK STATEMENT

FOR

PREVENTIVE MAINTENANCE WITH SAFETY

INSPECTIONS AND REPAIR OF

OVERHEAD AND AUTOMATIC OPENING

DOORS IN THE

KAISERSLAUTERN MILITARY COMMUNITY

(KMC)

30 May 2018

Table of Contents

Section Number and Title Page Number

1.0. Description of Services

2.0. Services Summary

3.0. Government Furnished Property and Services

4.0. Appendices

A. Overhead Door Estimated Workload Data Per Year

B. Automatic Opening Door Estimated Workload Data Per Year

C. Current Overhead Door Equipment List ………………………………………………………11

D. Current Automatic Opening Door Equipment List …………………………………………29

PERFORMANCE WORK STATEMENT (PWS)

FOR

PREVENTIVE MAINTENANCE WITH SAFETY INSPECTIONS AND REPAIR OF OVERHEAD AND

AUTOMATIC OPENING DOORS IN THE KAISERSLAUTERN MILITARY COMMUNITY (KMC)

1. DESCRIPTION OF SERVICES. The Contractor shall provide all non-personal services, management, tools, supplies, equipment, travel and labor necessary to perform Preventive Maintenance (PM) with safety inspections and repairs of overhead and automatic opening doors in the Kaiserslautern Military Community (KMC) in a manner that shall ensure safe and continuous operation. All maintenance, inspection and repair services shall conform to standard commercial practices in maintaining overhead and automatic opening doors in accordance with (IAW)

ASR A 1.7 (Technische Regeln für Arbeitsstätten Türen und Tore: Technical Rules, Guidelines for Doors, and

Gates), DIN 14677 für die Instandhaltung von Feststellanlagen (maintenance of arrester systems for fire barrier doors) and UVV (Vereinigte Berufsgenossenschaften, Unfallverhütungsvorschriften), GUV-R 198 (Gesetzliche

Unfallversicherung/Regeln für den Einsatz von persönlicher Schutzausrüstung zum Halten und Retten – Statutory

Accident Insurance/Rules for Use of Personal Protective Equipment used for Holding and Rescuing).

1.1. TECHNICAL DESCRIPTION OF OVERHEAD DOORS. Overhead doors are defined as roll-up doors or overhead sectional doors, with exception of sliding/overhead fire doors as listed in Appendix C. The components of automatic and manual opening roll-up or overhead sectional doors consist of electrical systems, a drive with electrical motors, pulleys, cables, electronic control units, remote control panels, emergency switches, and wings/partitions with safety glass IAW Appendix C. The contractor is required to provide proof that personnel performing manitenance, safety inspections, and repairs under this contract are qualified/certified to perform such work (Sachkundiger/Befähigte Person für kraftgetätigte Fenster, Türen und Tore and "Sachkundebescheinigung für

Befähigte Person für Feuerschutzabschlüssen (Brandschutztüren)).

1.2. TECHNICAL DESCRIPTION OF AUTOMATIC OPENING DOORS. Automatic opening doors are defined as sliding doors, swinging doors and revolving doors as listed in Appendix D. Sliding doors are opening automatically, swinging doors are opening on a double hinge, and revolving doors consist of orthogonal partitions that rotate about a central pivot. The components of automatic opening doors consist of electrical systems within the doors; a drive with electrical motors, pulleys, cables, electronic control units, remote control panels, emergency switches, and wings/partitions with safety glass.

1.3. QUALIFICATIONS. Contractor service technicians shall be trained and certified experts to perform service and repairs. Technicians shall meet German federal and local certification requirements for maintaining and repairing overhead and automatic opening doors. Contractor technicians shall have knowledge of the current

German safety and accident prevention regulations and the usage of guidelines and generally recognized rules of engineering IAW commercial practices, to be able to assess the proper condition of the overhead and automatic opening doors.

1.4. PREVENTIVE MAINTENANCE SERVICES. The Contractor shall provide PM on overhead and automatic opening doors at the locations designated in Appendix C and D annually during the months of October, November, and December to ensure reliable and continuous safe operation. Maintenance dates shall be coordinated with the

Contracting Officer Representative (COR) IAW this PWS paragraph 1.6.1. The maintenance shall be performed

IAW ASR A 1.7 (Technische Regeln für Arbeitsstätten Türen und Tore: Technical Rules, Guidelines for Doors, and

Gates), Prüfbuch für kraftbetätigte Tore und Türen – Maintenance Book for Power Driven Gates and Doors.

1.4.1. SAFETY INSPECTIONS ON OVERHEAD DOORS. The Contractor shall perform technical safety inspections through accredited surveillance associations or by the Contractor’s certified experts (“befähigte Person”) on all roll-up and overhead sectional doors annually in conjunction with PM services. All follow-up safety inspections required due to repairs cited during initial safety inspections shall be performed at no additional cost to the Government.

1.4.2. SAFETY INSPECTIONS ON AUTOMATIC OPENING DOORS. The Contractor shall perform technical safety inspections through accredited surveillance associations or by the Contractor’s certified experts

(“befähigte Person”) on all automatic opening doors semi-annually in the months November or December in conjunction with PM services, and during April or May. All follow-up safety inspections required due to repairs cited during initial safety inspections shall be performed at no additional cost to the Government.

1.4.3. MAINTENANCE AND SAFETY REPORTS. The contractor shall submit a written maintenance and safety inspection report to the COR within five (5) business days after completion of work. The report shall be based on the requirements located in ASR A 1.7 ( Technische Regeln für Arbeitsstätten Türen und Tore - Technical

Rules, Guidelines for Doors, and Gates). The report shall be in English and include, but not limited to:

(a) Date and time of the service

(b) Identification of door system and location of maintenance i.e. roll-up door, sectional door, fire door, sliding door, revolving door, swinging door, automatic doors

(c) Overall condition including discrepancies cited and repairs needed

(d) Service performed and parts required

(e) Amount of time spent on inspection

(f) Name of the technician performing the service

1.5. REPAIR SERVICE. All repair work shall be IAW standard commercial practices using parts specified by the equipment manufacturers, or items of equal or higher quality. The Contractor shall notify the COR in writing (e-mail is acceptable) about the status of the repair service by the next business day. When required parts are not available, the Contractor shall notify the COR in writing (e-mail is acceptable) the next business day it is discovered.

The Contractor shall provide written documentation (for example, a letter/email from the parts manufacturer) to the

COR explaining any delays in delivery of the parts, as described in paragraph 1.5.1. and 1.5.2. The Contractor shall complete the repair within one business day or as scheduled with the COR after receiving the required parts from the manufacturer.

1.5.1. ROUTINE REPAIR SERVICE CALLS (Monday – Friday and US Federal Holidays: 0700 – 1600).

The COR will notify the Contractor of required repairs. The Contractor shall report to the work location within four

(4) hours after verbal/email notification or as scheduled by the COR. If repair cannot be performed the Contractor shall survey the repair and provide a repair estimate for material and estimated performance date of repair not later than one (1) business day after receiving the requested prices of the required parts from the manufacturer. The

Contractor shall provide written documentation (for example, a letter/email from the parts manufacturer) to the COR if the requested price information/part delivery time can not be obtained within five (5) business days after the survey. The repair estimate shall be submitted to the Contracting Officer (CO) and COR. The Contractor shall not make any repairs until written approval is received from the CO or COR. The written approval can be issued by e-mail, letter or by the CO or COR signing the repair estimate with date. The Contractor shall commence repair work within one (1) business day after approval unless the parts are not available. The Contractor is not entitled to payment for the cost estimate.

1.5.2. EMERGENCY REPAIR SERVICE CALLS. (Monday – Friday and US Federal Holidays: 1600-0700;

Saturday, Sunday and German Federal Holidays: 24 Hours). The Contractor shall report to the work location within four (4) hours of notification by the COR. The contractor shall survey the repair and provide a repair estimate to the CO and COR as described in 1.5.1. The contractor shall provide an emergency telephone number to the COR within one (1) business day after contract awarded. The COR will provide the 786 CES/CEOES standby phone number to the Contractor after contract award.

1.5.3. PARTS. If the required repair parts are expected to exceed a value of $5,000.00 per repair call, the

Contracting Officer must approve the costs and therefore the COR shall notify the Contracting Officer in advance to obtain an approval before authorizing the contractor to proceed with the repair. The Contractor shall supply repair parts parts for approved repairs that are of equal or higher quality to the OEM parts required for each overhead or automatic opening door. For parts ordered or manufactured, a copy of the applicable invoice shall be provided as proof of amount paid, or to be paid to the manufacturer/wholesaler, or other supporting documentation/quotation regarding the cost of these parts shall be provided to the COR. The Contractor shall seek out all appropriate discounts from the manufacturer/wholesaler and shall pass the discounts onto the Government.

For shipping charges, a copy of applicable invoice shall be provided as proof of amount paid. Reimbursement is limited to the net price of parts listed, including shipping charges, if applicable (no handling charge). The net price is the price as paid by the Contractor, no costs or profits added.

1.6. REQUIRED DOCUMENTATION.

1.6.1. PREVENTIVE MAINTENANCE AND SAFETY INSPECTION SCHEDULE. The Contractor shall furnish a written schedule for all PM and safety inspections to the designated CO or COR no later than seven (7) business days after award of contract, and thereafter annually no later than twenty (20) business days prior to the start date of the service. The schedule shall include the estimated date and location. The Contractor shall provide any schedule changes to the COR no later than seven (7) business days prior to the start of the service.

1.6.2. ROUTINE AND EMERGENCY REPAIR REPORTS. The Contractor shall provide repair reports and work documentations to the COR within three (3) working days after completion of work. The reports shall be in

English and include:

(a) Date and time of the service

(b) Location, door number/serial number and type (i.e. roll-up door, sectional door, fire door, sliding door, swinging door, revolving, automatic)

(c) Full functionality test

(d) Service performed and parts used

(e) Amount of time worked

(f) Name of the technician performing the service

1.6.3. DELIVERABLES.

Deliverables PWS paragraph

Due Date (Calendar Days)

Written Maintenance And Safety Inspection Report 1.4.3. Within five (5) business days after completion of work

Parts Cost Estimate for Routine and Emergency

Repairs

1.5.1. & 1.5.2. Not later than one (1) business day after receiving requested price of required parts

Routine and Emergency Repair Reports 1.6.2. Within three (3) working days after completion of work

Quality Control Plan 1.8.1. Within ten (10) business days after contract award

Manpower Reporting via the secure data collection site

1.8.8. Not later than 31 October each year

1.7. WASTE DISPOSAL. All trash and hazardous waste, generated as a result of PM, safety inspections, emergency or routine repairs, shall be disposed of off base, IAW the German Waste Disposal Law at no additional cost to the Government.

1.8. GENERAL INFORMATION.

1.8.1. QUALITY CONTROL. The Contractor shall have and maintain a written Quality Control Plan (QCP) to ensure maintenance, safety inspections and repair services are performed IAW this PWS. The Contractor shall have procedures to identify and prevent defective services from recurring. As a minimum, the Contractor shall have quality control procedures that address the areas identified in Paragraph 2, Services Summary. The Contractor shall submit the QCP in writing to the CO for acceptance within ten (10) business days after contract award. The QCP becomes a compliance document after acceptance by the CO.

1.8.2. HOURS OF OPERATION. Contractor’s hours of operations shall be IAW below table.

Hours of Operation Maintenance Services and

Safety Inspection

Repairs Emergency Repairs

Monday-Friday and US Federal

Holidays 0700-1600 0700-1600 1600-0700

Saturdays, Sundays, & German and US Federal Holidays 24 hours

U. S. / German Federal Holidays. German and American holidays can be found at the following web address: https://de.usembassy.gov/holiday-calendar/

1.8.3. PERFORMANCE OF SERVICES DURING MILITARY EXERCISES OR OPERATIONS. Work stoppages may occur during the execution of this contract due to military exercises or operations. During these times, access to areas supporting the exercise or operation may be curtailed or denied. During scheduled and unscheduled exercises or operations, the Contractor shall be prepared to postpone performance in coordination with the COR until immediately after completion of the military exercise or operation.

1.8.4. UNACCEPTABLE PERFORMANCE. The Contractor will be given four (4) hours after notification to correct unacceptable performance. If deficiencies are not corrected within the required time frame, the COR will notify the Contracting Officer for action. The Contractor shall re-perform at no cost to the government. Any re-performance and/or unacceptable performance will be documented by the COR and may result in the Government seeking equitable price reduction or adequate consideration IAW Federal Acquisition Regulation (FAR) clause

52.212-4, Contract Terms and Conditions-Commercial Items due to acceptance of nonconforming services.

1.8.5. SECURITY REQUIREMENTS. The Contractor personnel shall comply with all requirements and procedures IAW AFFARS 5352.242-9000, Contractor access to Air Force Installations.

1.8.5.1. CONTRACTOR/EMPLOYEE BASE PASS AND IDENTIFICATION, SPECIAL CLEARANCES

AND VEHICLE PASSES. The Contractors personnel shall obtain Base Entry Identification, Installation Common

Access Card (ICAC). In order to obtain the ICAC the Contractor is required to submit a USAFE IMT 79 (Request for Base Entry Identification), Memo of Base ID request and the Security Questionnaire for simple security check as well as a Police Good Conduct Certificate (Polizeiliches Fuehrungszeugnis). USAFE IMT 79, Memo of Base ID request and the Security Question forms shall be provided by the 786 CES/CEOES COR. Contractor personnel shall take the USAFE Form 79, Memo of Base ID request along with certification of good personal conduct and the Security

Questionnaire to Bldg #134 at Ramstein Air Base, to obtain the ICAC. Contractor Personnel shall only gain access to the KMC after the security check has been passed with positive result. It is the responsibility of the Contractor to collect and turn-in the ICAC to the COR within one week for personnel no longer employed.

1.8.5.2. ESCORT. The Contractor will be escorted for entry into Areas on Ramstein Air Base requiring escorted entry, as needed. Arrangements for escorts will be made by the COR.

1.8.5.3. SPECIAL QUALIFICATIONS. Contractor employees performing services shall be able to speak enough English to communicate on a basic level with on site personnel.

1.8.6. CONFORMANCE WITH ENVIRONMENTAL MANAGEMENT SYSTEMS.

The Contractor shall perform work under this contract consistent with the relevant environmental policy and objectives identified in the installation Environmental Management System (EMS) applicable for the contract. The

Contractor shall perform work in a manner that conserves water, energy and other resources to the maximum extent feasible and ensure minimum production of waste as possible, giving preference to recycling and reutilization opportunities. Furthermore, the Contractor shall give preference to less toxic materials whenever available and still reliable for their work. In the event an environmental nonconformance or noncompliance of host nation and USAF environmental laws and regulations associated with the contracted services is identified, the Contractor shall take corrective and/or preventative actions. In the case of a noncompliance, the Contractor shall respond and take corrective action immediately. In the case of a nonconformance, the Contractor shall respond and take corrective action based on the time schedule established by the EMS Coordinator. In addition, the Contractor shall ensure that their employees are aware of the environmental management system on base and how these requirements affect their work performed under this contract. All on-site contractor personnel shall receive the installation EMS awareness level information.

1.8.6.1. CONFORMANCE WITH ENVIRONMENTAL REQUIREMENTS.

The Contractor shall perform all work in accordance with applicable German and US Air Force environmental laws, regulations and operating standards, including but not limited to the Final Governing Standards (FGS) for Germany.

The Contractor shall be immediately capable of understanding and addressing environmental laws and regulations as they pertain to work performed under this contract. The FGS for Germany and other important environmental laws

& requirements applicable for all Contractors working on base will be made available upon request.

1.8.7. DOD MISSION ESSENTIAL SERVICES DURING CRISIS. It is determined that none of the services as stated in this PWS are mission essential.

1.8.8. CONTRACTOR MANPOWER REPORTING. The Contractor shall report ALL Contractor labor hours

(including subcontractor labor hours) required for performance of services provided under this contract for the PM with safety inspections and repairs of overhead and automatic opening doors via a secure data collection site. The

Contractor is required to completely fill in all required data fields at http://www.ecmra.mil. Reporting inputs will be for the labor executed during the period of performance for each Government fiscal year (FY), which runs 1

October through 30 September. While inputs may be reported any time during the FY, all data shall be reported no later than 31 October of each calendar year. Contractors may direct questions to the CMRA help desk via hyperlink.

1.9. USES AND SAFEGUARDING OF INFORMATION. Information from the secure web site is considered to be proprietary in nature when the contract number and Contractor identity are associated with the direct labor hours and direct labor dollars. At no time will any data be released to the public with the Contractor name and contract number associated with the data.

1.10. USER MANUALS: Data for Air Force service requirements shall be input at the Air Force CMRA link.

However, user manuals for government personnel and Contractors are available at the Army CMRA link at http://www.ecmra.mil.

2.0. SERVICES SUMMARY (SS). The SS provides information on contract requirements and the expected level of the Contractor’s performance. The contract service requirements are summarized in performance objectives. The performance threshold briefly describes the acceptable levels of service required for each requirement. These thresholds are critical to mission success. During the first 30 days of the contract, four errors on each –performance objective will be allowed in an effort to overcome normal phase-in problems (this applies when there is a change of

Contractor only).

3.0. GOVERNMENT FURNISHED PROPERTY AND SERVICES. The government will provide electricity to the Contractor to perform services identified in this PWS.

4.0. APPENDICES.

A. Overhead Doors Estimated Workload Data Per Year

B. Automatic Opening Doors Estimated Workload Date Per Year

C. Current Overhead Door Equipment List

D. Current Automatic Opening Door Equipment List

Performance Objective

PWS Paragraph

Performance Threshold

SS-1. Perform Preventive Maintenance:

Annual maintenance on overhead and automatic opening doors are performed timely and properly

IAW this PWS using the equipment listing in

Appendix C and D.

1.4 No more than 8 deficiencies

per performance year.

SS-2. Perform Safety Inspections:

Annual safety inspections on overhead and automatic opening doors are performed timely and properly IAW this PWS using the equipment listing in Appendix C and D.

1.4.1 and 1.4.2.

No more than 8 deficiencies per performance year.

SS-3. Perform Routine Repair:

Routine repairs are performed properly and within times specified on overhead and automatic opening doors.

1.5.1 No more than 5 deficiencies

per month

SS-4. Perform Emergency Repair:

Emergency repairs are performed properly and within times specified on overhead and automatic opening doors.

1.5.2 No deficiencies

SS-5. Routine and Emergency Repair Reports:

Provide Submittals, Schedules and Reports:

Submittals, Preventive Maintenance Schedules, and

Reports provided are complete, accurate, and delivered within time specified.

1.6.2 including its sub-paragraphs

No more than 6 late, incomplete or inaccurate submittals/schedules/reports per month

Appendix A

OVERHEAD DOORS ESTIMATED WORKLOAD DATA PER YEAR

ESTIMATED

QUANTITY ITEM NAME

1 Annual Preventive Maintenance 645 each

2 Annual Safety Inspection 645 each

Routine Repair Service Calls

(average of 5 hours per call) 175 each

Emergency Repair Service Calls

(average of 3 hours per call) 24 each

NOTE:

(a) Each routine repair service call for Overhead Doors is estimated to be 5 hours. The Contractor shall invoice and will be paid by service call, regardless of the actual duration of the repair work per call. If the actual hours worked exceed the total estimated hours for Routine Repair in Appendix A, Estimated Overhead Doors

Workload Data Per Year, by more than 10% at the end of the performance period, upon the request of the

Contractor, an adjustment may be made for the hours worked in excess of the 10%, in accordance with clause

DFARS 252.243-7002, Request for Equitable Adjustment. The basis for the adjustment are the total estimated hours for Routine Repairs in Appendix A, Estimated Overhead Doors Workload Data Per Year

(b) Each emergency repair service call for Overhead Doors is estimated to be 3 hours. The Contractor shall invoice and will be paid by service call, regardless of the actual duration of the repair work per call. If the actual hours worked exceed the total estimated hours for Emergency Repair in Appendix A, Estimated Overhead

Doors Workload Data Per Year, by more than 10% at the end of the performance period, upon the request of the

Contractor, an adjustment may be made for the hours worked in excess of the 10%, in accordance with clause

DFARS 252.243-7002, Request for Equitable Adjustment. The basis for the adjustment are the total estimated hours for Emergency Repairs in Appendix A, Estimated Overhead Doors Workload Data Per Year

Appendix B

AUTOMATIC OPENING DOORS ESTIMATED WORKLOAD DATA PER YEAR

ESTIMATED

QUANTITY

ITEM NAME

1 Annual Preventive Maintenance 78 each

2 Semi Annual Safety Inspection 156 each

Routine Repair Service Calls

(average of 5 hours per call) 118 each

Emergency Repair Service Calls

(average of 3 hours per call) 21 each

NOTE:

(a) Each routine repair service call for Automatic Opening Doors is estimated to be 5 hours. The

Contractor shall invoice and will be paid by service call, regardless of the actual duration of the repair work per call. If the actual hours worked exceed the total estimated hours for Routine Repair in Appendix A, Estimated

Automatic Opening Doors Workload Data Per Year, by more than 10% at the end of the performance period, upon the request of the Contractor, an adjustment may be made for the hours worked in excess of the 10%, in accordance with clause DFARS 252.243-7002, Request for Equitable Adjustment. The basis for the adjustment are the total estimated hours for Routine Repairs in Appendix A, Estimated Automatic Opening Doors Workload

Data Per Year

(b) Each emergency repair service call for Automatic Opening Doors is estimated to be 3 hours. The

Contractor shall invoice and will be paid by service call, regardless of the actual duration of the repair work per call. If the actual hours worked exceed the total estimated hours for Emergency Repair in Appendix A, Estimated Automatic Opening Doors Workload Data Per Year, by more than 10% at the end of the performance period, upon the request of the Contractor, an adjustment may be made for the hours worked in excess of the

10%, in accordance with clause DFARS 252.243-7002, Request for Equitable Adjustment. The basis for the adjustment are the total estimated hours for Emergency Repairs in Appendix A, Estimated Automatic Opening

Doors Workload Data Per Year

APPENDIX C – CURRENT OVERHEAD DOOR LIST

Total Overhead Doors 645

LOCATION/ Bldg # Door Nr.:

MANUFACTURER

YEAR OF

MANUFACTURER

Size Size

High Width

RAB 126 1 Hoermann 1988 2.0 m 2.5 m

RAB 126 2 Hoermann 1988 2.0 m 2.5 m

RAB 126 3 Hoermann 1988 2.0 m 2.5 m

RAB 126 4 Hoermann 1988 2.0 m 2.5 m

RAB 126 5 Hoermann 1988 2.0 m 2.5 m

RAB 126 6 Hoermann 1988 2.0 m 2.5 m

RAB 126 7 Hoermann 1988 2.0 m 2.5 m

RAB 132 West Gate 1 Hoermann 2004 2.7 m 4.6 m

RAB 139 East Gate 1 Hoermann 2004 2.7 m 4.6 m

RAB 404 1 Crawford 1986 2.7 m 2.4 m

RAB 404 2 Crawford 1986 2.7 m 2.4 m

RAB 404 3 Crawford 1986 2.7 m 2.4 m

RAB 410 1 Crawford 1985 4.7 m 3.2 m

RAB 501 1 Hoermann 2001 2.5 m 3.8 m

RAB 501 2 Hoermann 2001 2.5 m 3.8 m

RAB 502 1 Hoermann 2004 3.0 m 3.0 m

RAB 502 2 Hoermann 2004 4.0 m 3.5 m

RAB 502 3 Hoermann 2004 4.0 m 3.5 m

RAB 502 4 Hoermann 2004 4.0 m 3.5 m

RAB 502 5 Hoermann 2004 3.0 m 3.0 m

RAB 503 1 Hoermann 2001 5.5 m 4.5 m

RAB 509 1 Labex 1997 6.0 m 5.5 m

RAB 509 2 Crawford 1990 6.0 m 5.5 m

RAB 510 1 Greschbach 1995 3.5 m 3.0 m

RAB 511 1 Hoermann 1999 7.0 m 5.0 m

RAB 511 2 Hoermann 1999 2.0 m 4.0 m

RAB 512 1 Teckentrup 2004 3.0 m 3.5 m

RAB 514 1 Durana 1995 4.5 m 3.0 m

RAB 514 2 Durana 1995 4.5 m 3.0 m

RAB 514 3 Durana 1995 4.5 m 3.0 m

RAB 518 1 BM Tortechnik unknown 4.5 m 3.0 m

RAB 533 1 Hoermann 2007 4.4 m 4.4 m

RAB 533 2 Hoermann 2007 4.4 m 4.4 m

RAB 1124 1 Hoermann unknown 5.1 m 4.5 m

RAB 2007 1 unknown unknown 4.5 m 3.5 m

RAB 2008 1 unknown unknown 6.0 m 4.0 m

RAB 2010 1 unknown unknown

RAB 2017 1 Bothe 2008 6.0 m 5.0 m

RAB 2017 2 Bothe 2008 6.0 m 5.0 m

RAB 2017 3 Bothe 2008 6.0 m 5.0 m

RAB 2018 1 B & N 2008 5.0 m 5.0 m

RAB 2018 2 B & N 2008 5.0 m 4.5 m

RAB 2018 3 B & N 2008 5.0 m 4.0 m

RAB 2018 4 B & N 2008 3.5 m 3.5 m

RAB 2019 1 Hoermann 2001 4.0 m 3.5 m

RAB 2019 2 Hoermann 2002 4.0 m 3.5 m

RAB 2019 3 unknown 1981 5.0 m 4.0 m

RAB 2019 4 unknown 1981 5.0 m 4.0 m

RAB 2019 5 unknown 1981 5.0 m 4.0 m

RAB 2019 6 unknown 1981 4.5 m 4.0 m

RAB 2044 1 EfA Flex unknown 7.0 m 6.0 m

RAB 2091 1 unknown unknown 4.0 m 3.5 m

RAB 2091 2 unknown unknown 4.0 m 3.5 m

RAB 2091 3 US Tor unknown 4.0 m 3.5 m

RAB 2091 4 Hoermann 2002 4.0 m 3.3 m

RAB 2109 1 Hoermann 1998 3.9 m 2.9 m

RAB 2109 2 Hoermann 1998 5.0 m 4.0 m

RAB 2126 1 Riko 2001 3.2 m 3.7 m

RAB 2126 2 Riko 2012 2.3 m 2.8 m

RAB 2126 5 Hoermann 2012 3.2 m 3.7 m

RAB 2126 6 Hoermann 2012 3.2 m 3.7 m

RAB 2126 7 Hoermann 2012 3.2 m 3.7 m

RAB 2126 15 Hoermann 2012 3.2 m 3.7 m

RAB 2126 16 Hoermann 2012 3.2 m 3.7 m

RAB 2126 17 Guenther 1990 3.2 m 3.7 m

RAB 2126 18 Hoermann 2012 2.9 m 3.7 m

RAB 2126 19 Hoermann 2012 3.2 m 3.7 m

RAB 2126 20 unknown unknown 2.9 m 3.7 m

RAB 2126 21 Kleine &Zäuner 2009 3.0 m 3.7 m

RAB 2126 22 Kleine &Zäuner 2009 3.2 m 3.7 m

RAB 2127 1

Hörmann, Brandschutztor 2012 3.3 m 3.6 m

RAB 2127 2

Jansen, Brandschutztor 2012 3.3 m 3.6 m

RAB 2127 3

Jansen, Brandschutztor 2012 3.3 m 3.6 m

RAB 2127 4

Jansen, Brandschutztor 2012 3.3 m 3.6 m

RAB 2127 5

Jansen, Brandschutztor 2012 3.3 m 3.6 m

RAB 2127 17 Hörmann 2012 3.3 m 3.6 m

RAB 2127 19 Hörmann 2007 3.0 m 4.0 m

RAB 2127 20 Kleine &Zäuner 2009 3.8 m 4.0 m

RAB 2127 21 Günther 2004 3.8 m 4.0 m

RAB 2127 22 Kleine & Zäuner 2009 3.8 m 4.0 m

RAB 2127 23 Günther 1990 3.8 m 4.0 m

RAB 2127 24 Kleine & Zäuner 2008 3.8 m 4.0 m

RAB 2127 19A EfA Flex 2007 4.0 m 4.0 m

RAB 2127 21A EfA Flex 2007 4.0 m 4.0 m

RAB 2127 23A EfA Flex 2007 4.0 m 4.0 m

RAB 2128 1 Albany 2004 4.0 m 3.8 m

RAB 2128 2 Albany 2004 4.0 m 4.0 m

RAB 2128 3 Albany 2004 4.0 m 3.8 m

RAB 2128 4 Albany 2004 4.0 m 3.0 m

RAB 2128 5 Hörmann 2012 4.0 m 3.8 m

RAB 2128 6 Hörmann 2012 4.0 m 3.8 m

RAB 2128 7 Hörmann 2012 4.0 m 3.8 m

RAB 2128 8 Hörmann 2012 4.0 m 3.8 m

RAB 2136 1 Crawford 1983 4.5 m 3.0 m

RAB 2136 2 Crawford 2006 5.0 m 3.5 m

RAB 2136 3 Hörmann 1991 4.0 m 3.5 m

RAB 2136 4 Hörmann 1991 4.0 m 3.5 m

RAB 2140 1 Loading Systems 2004 2.0 m 1.5 m

RAB 2140 2 Loading Systems 2004 3.5 m 2.0 m

RAB 2141 1 Günther 1997 6.0 m 4.0 m

RAB 2141 2 unknown unknown 6.0 m 4.0 m

RAB 2141 3 Günther 1984 4.2 m 3.7 m

RAB 2141 4 Günther 1984 6.0 m 4.0 m

RAB 2150 1 Gries 1993 4.5 m 3.5 m

RAB 2151 1 Günther 1992 8.0 m 13.0 m

RAB 2154 1 Mekoba unknown 3.5 m 6.0 m

RAB 2158 1 Hörmann 2014 8.0 m 5.0 m

RAB 2158 2 Hörmann 2014 8.0 m 5.0 m

RAB 2167 1 Mekoba 2008 4.0 m 4.0 m

RAB 2167 2 Crawford 2008 6.0 m 4.0 m

RAB 2172 1 unknown unknown 5.5 m 4.0 m

RAB 2172 2 unknown unknown 5.5 m 4.0 m

RAB 2172 3 unknown unknown 5.5 m 4.0 m

RAB 2172 4 B/T unknown 5.5 m 4.0 m

RAB 2174 1 Hörmann 2002 3.0 m 2.5 m

RAB 2174 2 Hörmann 2002 3.0 m 2.5 m

RAB 2174 3 Hörmann 2002 3.0 m 2.5 m

RAB 2174 4 Hörmann 2002 3.0 m 2.5 m

RAB 2174 5 Hörmann 2002 3.0 m 2.5 m

RAB 2174 6 Hörmann 2003 3.0 m 2.5 m

RAB 2179 1 Gries 1994 7.0 m 6.0 m

RAB 2179 2 Gries 1994 7.0 m 6.0 m

RAB 2179 3 Gries 1994 7.0 m 6.0 m

RAB 2179 4 Gries 1994 7.0 m 6.0 m

RAB 2179 5 Gries 1994 7.0 m 6.0 m

RAB 2179 6 Gries 1994 7.0 m 6.0 m

RAB 2179 7 Gries 1994 6.0 m 6.0 m

RAB 2191 1 Hörmann 2007 6.8 m 7.0 m

RAB 2191 2 Hörmann 2008 6.8 m 7.0 m

RAB 2191 3 Hörmann 2007 5.5 m 7.0 m

RAB 2191 4 Hörmann 2007 5.5 m 7.0 m

RAB 2191 5 Hörmann 2007 6.0 m 7.0 m

RAB 2191 6 Hörmann 2008 6.0 m 5.0 m

RAB 2191 7 Hörmann 2008 6.8 m 7.0 m

RAB 2191 8 Hörmann 2007 6.8 m 7.0 m

RAB 2191 9 Jansen 2008 1.5 m 1.0 m

RAB 2191 10 Hörmann 2007 4.0 m 3.0 m

RAB 2191 11 Hörmann 2007 3.8 m 3.5 m

RAB 2191 12 Hörmann 2007 3.8 m 3.5 m

RAB 2191 13 Jansen 2008 1.5 m 1.0 m

RAB 2196 1 unknown unknown 4.0 m 5.7 m

RAB 2196 2 Novoferm unknown 5.3 m 4.0 m

RAB 2196 3 Novoferm unknown 5.3 m 4.0 m

RAB 2196 4 Novoferm unknown 5.3 m 4.0 m

RAB 2204 1 Hörmann 2004 5.0 m 5.0 m

RAB 2208 1 Hörmann 1986 4.5 m 5.0 m

RAB 2208 2 Hörmann 1986 4.5 m 5.0 m

RAB 2208 3 Crawford 1986 6.0 m 4.0 m

RAB 2208 4 Hörmann 2006 6.0 m 5.0 m

RAB 2208 5 Hörmann 2006 2.0 m 4.0 m

RAB 2208 6 Gries 1994 3.5 m 3.0 m

RAB 2208 7 Hörmann 1986 3.5 m 3.0 m

RAB 2208 8 Hörmann 1986 3.5 m 3.0 m

RAB 2215 1 Günther 1992 3.5 m 3.5 m

RAB 2216 1 Gries 1998 5.0 m 5.5 m

RAB 2217 1 Hörmann 2004 4.8 m 4.5 m

RAB 2217 2 Hörmann 2004 4.8 m 4.5 m

RAB 2219 1 Hörmann 1993 3.0 m 2.5 m

RAB 2219 2 Hörmann 1993 2.5 m 2.5 m

RAB 2219 3 Rexinger unknown 4.0 m 3.0 m

RAB 2224 1 unknown unknown 4.0 m 4.0 m

RAB 2224 2 unknown unknown 3.0 m 2.5 m

RAB 2224 3 unknown unknown 3.0 m 2.5 m

RAB 2224 4 unknown unknown 3.0 m 2.5 m

RAB 2245 1 Hörmann 2011 5.0 m 4.5 m

RAB 2245 2 Hörmann 2005 4.6 m 4.5 m

RAB 2245 3 Hörmann 2005 5.0 m 4.5 m

RAB 2245 4 Hörmann 2005 5.0 m 4.5 m

RAB 2245 5 Hörmann 2005 5.0 m 4.5 m

RAB 2245 6 Hörmann 2005 5.0 m 4.5 m

RAB 2245 7 Hörmann 2005 5.0 m 4.5 m

RAB 2245 8 Hörmann 2005 5.0 m 4.5 m

RAB 2245 9 Hörmann 2005 5.0 m 4.5 m

RAB 2245 10 Hörmann 2005 5.0 m 4.5 m

RAB 2245 11

Akor

Brandschutztür 2005 4.5 m 4.5 m

RAB 2245 12

Hörmann

Brandschutztür Unknown 4.5 m 4.5 m

RAB 2248 1 Crawford 2002 3.0 m 4.5 m

RAB 2248 2 Crawford 2002 4.5 m 4.5 m

RAB 2250 1 Crawford 1989 5.0 m 4.0 m

RAB 2251 1 Hörmann 2003 4.5 m 4.5 m

RAB 2251 2 Hörmann 2003 4.5 m 4.5 m

RAB 2254 1 Böma unknown 4.0 m 5.0 m

RAB 2254 2 Böma unknown 4.0 m 5.0 m

RAB 2254 3 Böma Unknown 4.0 m 5.0 m

RAB 2254 4 Hörmann 2012 3.5 m 4.5 m

RAB 2254 5 Hörmann 2012 3.5 m 4.5 m

RAB 2265 1 Hörmann 1988 5.0 m 4.6 m

RAB 2291 1 Hörmann 2004 3.0 m 3.0 m

RAB 2303 1 Guenther 1988 4.0 m 4.0 m

RAB 2303 2 Guenther 1985 4.0 m 4.0 m

RAB 2303 3 Alupol 1998 4.0 m 4.0 m

RAB 2303 4 Guenther 1985 4.0 m 4.0 m

RAB 2303 5 Guenther 1985 4.0 m 4.0 m

RAB 2303 6 Crawford unknown 5.0 m 5.0 m

RAB 2303 7 Hoermann 2007 4.0 m 4.0 m

RAB 2303 8 Hoermann 2007 4.0 m 4.0 m

RAB 2303 9 Hoermann 2007 4.0 m 4.0 m

RAB 2303 10 Hoermann 2007 4.0 m 4.0 m

RAB 2303 11 Hoermann 2007 4.0 m 4.0 m

RAB 2303 12 Crawford 1983 5.0 m 5.0 m

RAB 2311 1 Crawford 2004 4.0 m 4.0 m

RAB 2311 2 Crawford 2004 4.0 m 4.0 m

RAB 2311 3 Crawford 2004 4.0 m 4.0 m

RAB 2311 4 Crawford 2004 4.0 m 4.0 m

RAB 2311 5 Crawford 2004 4.0 m 4.0 m

RAB 2311 6 Crawford 2004 4.0 m 4.0 m

RAB 2311 7 Crawford 2004 4.0 m 4.0 m

RAB 2311 8 Crawford 2004 4.0 m 4.0 m

RAB 2317 1 Crawford 1986 4.0 m 4.0 m

RAB 2327 1 GFA 1994 3.0 m 3.0 m

RAB 2337 1 Hoermann 2002 6.0 m 6.0 m

RAB 2340 1 unknown unknown 6.0 m 4.0 m

RAB 2340 2 Kaufmann 1995 7.0 m 15.0 m

RAB 2340 3 Haacon 1985 2.0 m 2.7 m

RAB 2358 1 Guenther 1993 3.5 m 3.5 m

RAB 2358 2 Teckentrup 2009 1.8 m 1.5 m

RAB 2369 1 Braselmann 2004 5.0 m 4.5 m

RAB 2369 2 Braselmann 2004 5.0 m 4.5 m

RAB 2370 1 Crawford 2000 3.0 m 3.5 m

RAB 2370 2 Crawford 2000 3.0 m 3.5 m

RAB 2370 3 Crawford 2000 3.0 m 3.5 m

RAB 2379 1 L&M 1999 4.0 m 2.5 m

RAB 2379 2 L&M 1999 4.0 m 2.5 m

RAB 2383 1 Guenther 1990 5.0 m 3.5 m

RAB 2383 2 Guenther 1990 5.0 m 3.5 m

RAB 2383 3 Guenther 1990 5.0 m 3.5 m

RAB 2383 4 Guenther 1990 5.0 m 3.5 m

RAB 2389 1 Hoermann 2006 3.0 m 4.0 m

RAB 2404 1 Hoermann 2005 5.0 m 5.0 m

RAB 2404 2 Alupol 2001 5.0 m 5.0 m

RAB 2404 3 Crawford 1978 3.0 m 3.5 m

RAB 2404 4 Crawford 1978 3.0 m 3.0 m

RAB 2404 5 Crawford 1978 3.0 m 3.5 m

RAB 2404 6 Crawford 1978 3.0 m 3.5 m

RAB 2404 7 E. Schroff 1978 5.0 m 5.0 m

RAB 2404 8 Crawford 1978 5.0 m 5.0 m

RAB 2404 9 Crawford 1978 5.0 m 5.0 m

RAB 2404 10 Crawford 1978 5.0 m 5.0 m

RAB 2404 11 Nowotnik 2004 5.0 m 5.0 m

RAB 2404 12 Nowotnik 2004 5.0 m 4.0 m

RAB 2404 13 Crawford 1995 5.0 m 5.0 m

RAB 2404 14 Crawford 1995 5.0 m 5.0 m

RAB 2404 15 Crawford 1995 5.0 m 5.0 m

RAB 2404 16 Crawford 1995 5.0 m 5.0 m

RAB 2404 17 Crawford 1995 5.0 m 5.0 m

RAB 2404 18 Crawford 1995 5.0 m 5.0 m

RAB 2404 19 Crawford 1995 5.0 m 5.0 m

RAB 2404 20 Crawford 1995 5.0 m 5.0 m

RAB 2404 21 Crawford 1995 5.0 m 5.0 m

RAB 2404 22 Crawford 1995 5.0 m 5.0 m

RAB 2404 23 Crawford 1995 5.0 m 5.0 m

RAB 2404 24 Crawford 1995 5.0 m 5.0 m

RAB 2404 25 Crawford 1995 3.0 m 3.5 m

RAB 2404 26 Crawford 1995 5.0 m 5.0 m

RAB 2404 27 Crawford 1995 5.0 m 5.0 m

RAB 2404 28 Crawford 1995 5.0 m 5.0 m

RAB 2407 1 Hoermann 1993 3.5 m 3.0 m

RAB 2407 2 Hoermann 1993 3.5 m 3.0 m

RAB 2407 3 Hoermann 1993 3.5 m 3.0 m

RAB 2407 4 Hoermann 1993 3.5 m 3.0 m

RAB 2407 5 Hoermann 1993 3.5 m 3.0 m

RAB 2407 6 Hoermann 1993 3.5 m 3.0 m

RAB 2429 1 Crawford 1990 6.0 m 5.0 m

RAB 2472 1 Crawford 2000 6.0 m 6.0 m

RAB 2472 2 Kleine & Zäuner 2008 6.0 m 6.0 m

RAB 2472 3 Crawford 2000 6.0 m 6.0 m

RAB 2472 4 Crawford 2000 6.0 m 6.0 m

RAB 2472 5 Crawford 2000 6.0 m 6.0 m

RAB 2472 6 Crawford 2000 6.0 m 6.0 m

RAB 2472 7 Crawford 2000 6.0 m 6.0 m

RAB 2472 8 Crawford 2000 6.0 m 6.0 m

RAB 2472 9 Crawford 2000 6.0 m 6.0 m

RAB 2472 10 Crawford 2000 6.0 m 6.0 m

RAB 2472 11 Crawford 2000 6.0 m 6.0 m

RAB 2472 12 Crawford 2000 6.0 m 6.0 m

RAB 2474 1 Kaufmann 1985 5.0 m 4.0 m

RAB 2474 2 Kaufmann 1985 5.0 m 4.0 m

RAB 2477 1 Günther 1977 3.5 m 3.0 m

RAB 2477 2 Günther 1977 3.5 m 3.0 m

RAB 2477 3 Günther 1977 3.5 m 3.0 m

RAB 2477 4 Günther 1977 3.5 m 3.0 m

RAB 2477 5 Günther 1977 3.5 m 3.0 m

RAB 2477 6 Günther 1977 4.0 m 3.0 m

RAB 2477 7 Günther 1977 3.5 m 3.0 m

RAB 2477 8 Günther 1977 3.5 m 3.0 m

RAB 2477 9 Günther 1977 3.5 m 3.0 m

RAB 2477 10 Günther 1977 4.0 m 3.0 m

RAB 2477 11 Günther 1977 3.5 m 3.0 m

RAB 2477 12 Günther 1977 4.0 m 3.0 m

RAB 2477 13 Günther 1977 5.0 m 4.5 m

RAB 2477 14 Günther 1977 5.0 m 4.5 m

RAB 2477 15 Günther 1977 5.0 m 4.5 m

RAB 2477 16 Günther 1977 5.0 m 4.5 m

RAB 2477 17 Günther 1977 5.0 m 4.5 m

RAB 2477 18 Günther 1987 3.5 m 3.0 m

RAB 2477 19 Hörmann 1987 3.5 m 3.0 m

RAB 2477 20 Hörmann 1987 3.5 m 3.0 m

RAB 2477 21 Hörmann 1987 3.5 m 3.0 m

RAB 2478 1 Hörmann 2005 5.0 m 3.8 m

RAB 2478 2 Hörmann 2005 5.0 m 4.0 m

RAB 2485 1 Kleine & Zäuner 2002 5.0 m 4.0 m

RAB 2485 2 Kleine & Zäuner 2002 5.5 m 4.0 m

RAB 2494 1 Crawford unknown 3.0 m 4.0 m

RAB 2494 2 Crawford unknown 3.0 m 4.0 m

RAB 2494 3 Crawford unknown 3.0 m 4.0 m

RAB 2494 5 Crawford unknown 4.0 m 3.5 m

RAB 2494 6 Crawford unknown 4.0 m 3.5 m

RAB 2494 7 unknown unknown 3.0 m 3.0 m

RAB 2494 8 unknown Unknown 3.0 m 3.0 m

RAB 2496 1 Effertz 1996 3.5 m 3.0 m

RAB 2496 2 Effertz 1996 3.5 m 3.0 m

RAB 2500 1 Teckentrup 2003 5.0 m 4.0 m

RAB 2500 2 Teckentrup 2003 5.0 m 4.0 m

RAB 2500 3 Teckentrup 2003 5.0 m 4.0 m

RAB 2513 1 Hoermann 2001 7.0 m 5.0 m

RAB 2513 2 Hoermann 2001 7.0 m 5.0 m

RAB 2518 1 Kaufmann 1986 5.0 m 3.0 m

RAB 2681 1 Lindab 2002 4.0 m 4.5 m

RAB 2684 1 Lindab 2002 4.0 m 4.5 m

RAB 2685 1 Lindab 2002 4.0 m 4.5 m

RAB 2686 1 Lindab 2002 4.5 m 4.0 m

RAB 2687 1 Lindab 2002 4.5 m 4.0 m

RAB 2688 1 Lindab 2002 4.0 m 4.5 m

RAB 2689 1 Hoermann 2002 3.0 m 3.6 m

RAB 2689 2 Hoermann 2002 3.0 m 3.6 m

RAB 2689 3 Hoermann 2002 3.0 m 3.6 m

RAB 2689 4 Hoermann 2002 3.0 m 3.6 m

RAB 2690 1 Hoermann 1992 3.5 m 3.0 m

RAB 2690 2 Hoermann 1992 3.5 m 3.0 m

RAB 2690 3 Hoermann 1992 3.5 m 3.0 m

RAB 2690 4 Hoermann 1992 3.5 m 3.0 m

RAB 2690 5 Hoermann 1992 3.5 m 3.0 m

RAB 2690 6 Hoermann 1992 3.5 m 3.0 m

RAB 2690 7 Hoermann 1992 3.5 m 3.0 m

RAB 2690 8 Hoermann 1992 3.5 m 3.0 m

RAB 2694 1 Gries 1995 6.0 m 4.0 m

RAB 2694 2 Gries 1995 6.0 m 4.0 m

RAB 2694 3 Gries 1995 6.0 m 4.0 m

RAB 2696 1 Guenther 1992 3.2 m 3.2 m

RAB 2696 2 Guenther 1992 3.2 m 3.2 m

RAB 2696 3 Guenther 1992 3.2 m 3.2 m

RAB 2696 4 Guenther 1992 3.2 m 3.2 m

RAB 2696 5 Guenther 1992 3.2 m 3.2 m

RAB 2696 6 Guenther 1992 3.2 m 3.2 m

RAB 2696 7 Guenther 1992 3.2 m 3.2 m

RAB 2696 8 Guenther 1992 3.2 m 3.2 m

RAB 2900 1 Teckentrup 2003 4.7 m 5.0 m

RAB 2900 2 Teckentrup 2003 4.7 m 5.0 m

RAB 2900 3 Teckentrup 2003 4.7 m 5.0 m

RAB 2900 4 Teckentrup 2003 4.7 m 5.0 m

RAB 2900 5 Teckentrup 2003 4.7 m 5.0 m

RAB 2900 6 Teckentrup 2003 4.7 m 5.0 m

RAB 2900 7 Teckentrup 2003 4.7 m 5.0 m

RAB 2900 8 Teckentrup 2003 4.7 m 5.0 m

RAB 2900 9 Teckentrup 2004 5.0 m 4.0 m

RAB 2900 10 Albany 2004 5.0 m 4.0 m

RAB 2900 11 Albany 2004 5.0 m 4.0 m

RAB 2900 12 Albany 2004 5.0 m 4.0 m

RAB 3450 1 B/T 2010 6.0 m 5.0 m

RAB 5122 1 EBS 1999 5.0 m 4.0 m

RAB 5122 2 EBS 1999 5.0 m 4.0 m

RAB Total: 361 interior sliding fire door

Chili’s Too 1-8 Hörmann 2006 4.0 m 8.0 m interior sliding fire door

ODR elevator 1-7 Jansen 2005 4.0 m 3.2 m interior fire doors

LL towards SVS Docks

1-9 Jansen 2005 4.0 m 8.0 m interior sliding fire door

BX North Entrance 1-1 Jansen 2005 4.0 m 10.0 m interior sliding fire doors

BX Main Entrance 1-2 Jansen 2005 4.0 m 10.0 m interior fire doors

BX South Entrance 1-6 Jansen 2005 3.0 m 10.0 m interior fire doors

BX/Powerzone 1-4 Jansen 2005 4.3 m 8.0 m interior fire doors

BX/Powerzone 1-5 Jansen 2005 4.3 m 8.0 m interior sliding fire door

BX Customer Service/Restrooms

1-3 Jansen 2005 4.0 m 3.6 m exterior Bookstore 1-21 Hörmann 2006 2.5 m 3.0 m exterior Food court 1-18 Hörmann 2006 3.0 m 3.5 m exterior Garbage docks 1-19 Hörmann 2006 3.6 m 5.7 m exterior Garbage docks 1-20 Hörmann 2006 3.6 m 3.9 m exterior BX/AAFES loading docks 1-10 Hörmann 2006 2.5 m 2.0 m exterior BX/AAFES loading docks 1-11 Hörmann 2006 2.5 m 2.0 m exterior BX/AAFES loading docks 1-12 Hörmann 2006 2.5 m 2.0 m exterior BX/AAFES loading docks 1-13 Hörmann 2006 2.5 m 5.0 m exterior BX/AAFES loading docks 1-14 Hörmann 2006 2.5 m 2.0 m exterior BX/AAFES loading docks 1-15 Hörmann 2006 2.5 m 2.0 m exterior Docks SVS 1-16 Hörmann 2006 3.0 m 3.5 m exterior Docks SVS 1-17 Hörmann 2006 3.0 m 3.5 m

KMCC

TOTAL

Vogelweh 2041 1 Hörmann 2007 4.5 m 4.0 m

Vogelweh 2041 2 Hörmann 2007 4.5 m 4.0 m

Vogelweh 2041 3 Hörmann 2007 4.5 m 4.0 m

Vogelweh 2041 4 Hörmann 2007 4.5 m 4.0 m

Vogelweh 2041 5 Hörmann 2007 4.5 m 5.0 m

Vogelweh 2096 1 Ind. Tor service 2000 4.3 m 6.0 m

Vogelweh 2096 2 Ind. Tor service 2000 4.3 m 4.0 m

Vogelweh 2096 3 Ind. Tor service 2000 4.3 m 6.0 m

Vogelweh Fire station 9-

B244 1 Durana 2008 4.5 m 4.0 m

Vogelweh

TOTAL:

E-Hof 51 1 Guenther 1985 4.5 m 5.0 m

E-Hof 51 2 Guenther 1985 4.5 m 5.0 m

E-Hof 72 1 Crawford 1974 2.5 m 2.0 m

E-Hof 72 2 Crawford 1974 3.5 m 3.0 m

E-Hof 86 1 Guenther 1985 4.5 m 5.0 m

E-Hof 86 2 Guenther 1985 4.5 m 5.0 m

E-Hof 86 3 Guenther 1985 4.5 m 5.0 m

E-Hof 86 4 Guenther 1985 4.5 m 5.0 m

E-Hof 86 5 Guenther 1985 4.5 m 5.0 m

E-Hof 86 6 Guenther 1985 4.5 m 5.0 m

E-Hof 86 7 Guenther 1985 4.5 m 5.0 m

E-Hof 86 8 Guenther 1985 4.5 m 5.0 m

E-Hof 86 9 Guenther 1985 4.5 m 5.0 m

E-Hof 86 10 Guenther 1985 4.5 m 5.0 m

E-Hof 86 11 Guenther 1985 4.5 m 5.0 m

E-Hof 86 12 Kleine & Zaeuner 2013 4.5 m 5.0 m

E-Hof 86 13 Guenther 1985 4.5 m 5.0 m

E-Hof 716 1 Crawford 4.5 m 4.0 m

E'Hof

Kapaun 2763 1 Hoermann 2003 2.2 m 3.2 m

Kapaun 2763 2 Hoermann 2003 2.2 m 3.2 m

Kapaun 2777 1 Kleine &Zäuner 2009 3.0 m 3.0 m

Kapaun 2777 2 Kleine &Zäuner 2009 3.0 m 3.0 m

Kapaun 2777 3 Kleine &Zäuner 2009 3.0 m 3.0 m

Kapaun 2777 4 Kleine &Zäuner 2009 3.0 m 3.0 m

Kapaun 2777 5 Kleine &Zäuner 2009 3.0 m 3.0 m

Kapaun 2777 6 Kleine &Zäuner 2009 3.0 m 3.0 m

Kapaun 2777 7 Kleine &Zäuner 2009 3.0 m 3.0 m

Kapaun 2777 8 Kleine &Zäuner 2009 3.0 m 3.0 m

Kapaun 2777 9 Kleine &Zäuner 2009 3.0 m 3.0 m

Kapaun 2777 10 Kleine &Zäuner 2009 3.0 m 3.0 m

Kapaun 2777 11 Kleine &Zäuner 2009 3.0 m 3.0 m

Kapaun 2777 12 Kleine &Zäuner 2009 3.0 m 3.0 m

Kapaun 2777 13 Kleine &Zäuner 2009 3.0 m 3.0 m

Kapaun 2806 1 Teckentrup 2014 3.5 m 3.8 m

Kapaun 2806 2 Teckentrup 2014 3.5 m 3.8 m

Kapaun 2806 3 Teckentrup 2014 3.5 m 3.8 m

Kapaun 2806 4 Teckentrup 2014 3.5 m 3.8 m

Kapaun 2806 5 Teckentrup 2014 3.5 m 3.8 m

Kapaun 2806 6 Teckentrup 2014 3.5 m 3.8 m

Kapaun 2806 7 Teckentrup 2014 3.5 m 3.8 m

Kapaun 2806 8 Teckentrup 2014 3.5 m 3.8 m

Kapaun 2806 9 Teckentrup 2014 3.5 m 3.8 m

Kapaun 2806 10 Teckentrup 2014 3.5 m 3.8 m

Kapaun 2806 11 Crawford 1978 3.5 m 3.9 m

Kapaun 2806 12 Crawford 1978 3.5 m 3.9 m

Kapaun 2807 1 Crawford 1978 3.5 m 3.8 m

Kapaun 2807 2 Crawford 1978 3.5 m 3.8 m

Kapaun 2807 3 Crawford 1978 3.5 m 3.8 m

Kapaun 2807 4 Crawford 1978 3.5 m 3.8 m

Kapaun 2807 5 Hoermann 1985 3.5 m 3.8 m

Kapaun 2807 6 Hoermann 1985 3.5 m 3.8 m

Kapaun 2807 7 Hoermann 1985 3.5 m 3.8 m

Kapaun 2807 8 Hoermann 1985 3.5 m 3.8 m

Kapaun 2807 9 Hoermann 1985 3.5 m 3.8 m

Kapaun 2807 10 Hoermann 1985 3.5 m 3.8 m

Kapaun 2807 11 Hoermann 1985 3.5 m 3.8 m

Kapaun 2808 1 Crawford 1978 5.5 m 4.0 m

Kapaun 2808 2 Crawford 1978 5.5 m 4.0 m

Kapaun 2808 3 Crawford 1978 3.5 m 3.8 m

Kapaun 2808 4 Crawford 1978 3.5 m 3.8 m

Kapaun 2808 5 Crawford 1978 3.5 m 3.8 m

Kapaun 2808 6 Crawford 1978 3.5 m 3.8 m

Kapaun 2808 7 Crawford 1978 3.5 m 3.8 m

Kapaun 2808 8 Crawford 1978 2.5 m 2.5 m

Kapaun 2808 9 Crawford 1978 3.5 m 3.8 m

Kapaun 2808 10 Crawford 1978 3.5 m 3.8 m

Kapaun 2808 11 Crawford 1978 3.5 m 3.8 m

Kapaun 2808 12 Crawford 1978 2.5 m 2.5 m

Kapaun 2808 13 Crawford 1978 3.5 m 3.8 m

Kapaun 2808 14 Crawford 1978 3.5 m 3.8 m

Kapaun 2808 15 Crawford 1978 3.5 m 3.8 m

Kapaun 2808 16 Crawford 1978 2.5 m 2.5 m

Kapaun

Landstuhl 3366 1 L & M 2004 6.0 m 4.0 m

Landstuhl 3366 2 L & M 2004 4.0 m 4.0 m

Landstuhl 3366 3 L & M 2004 4.0 m 4.0 m

Landstuhl 3709 1 L & M 2004 6.0 m 5.0 m

Landstuhl 3709 2 L & M 2004 6.0 m 5.0 m

Landstuhl

Bann 5 1 Günther 1983 2.5 m 2.5 m

Bann 5 2 Günther 1983 2.5 m 2.5 m

Bann 5 3 Günther 1983 2.5 m 2.5 m

Bann

CTS 650 1 Durana 2007 3.0 m 2.5 m

CTS 650 2 Durana 2007 3.0 m 2.5 m

CTS 660 1 L & M 2003 5.0 m 5.0 m

CTS 660 2 L & M 2003 5.0 m 5.0 m

CTS 673 1 Mekoba 2005 N/A N/A

CTS 676 1 Hoermann 1997 3.0 m 4.0 m

CTS 678 1 Faltec 1990 4.0 m 4.0 m

CTS 680 1 Faltec 1990 3.0 m 3.0 m

CTS 687 1 Guenther 1987 5.0 m 5.0 m

CTS 687 3 Guenter 1987 5.0 m 5.0 m

CTS 687 4 Hoermann unknown 5.0 m 5.0 m

CTS 692 1 Efferts 1985 5.0 m 4.0 m

CTS 693 1 L & M unknown 5.0 m 4.5 m

CTS 694 1 L & M unknown 5.0 m 4.5 m

CTS 697 1 Hoermann 1985 5.0 m 4.0 m

CTS 697 2 Hoermann 2011 4.0 m 3.8 m

CTS 698 1 Durana 2006 4.0 m 3.0 m

CTS 698 2 Durana 2006 5.0 m 4.0 m

CTS 698 3 Durana 2006 5.0 m 4.0 m

CTS 698 4 Durana 2006 5.0 m 4.0 m

CTS 698 5 Durana 2006 5.0 m 4.0 m

CTS 698 6 Durana 2006 5.0 m 4.0 m

CTS 698 7 Durana 2006 5.0 m 4.0 m

CTS 698 8 Durana 2006 4.0 m 3.0 m

CTS 703 1 Guenther 1982 3.0 m 2.0 m

CTS 703 2 Hoermann unknown 4.0 m 3.5 m

CTS 703 3 Hoermann unknown 4.0 m 3.0 m

CTS 703 4 Hoermann unknown 4.0 m 3.5 m

CTS 709 1 Guenther 1982 3.0 m 2.0 m

CTS 709 2 Guenther 1982 3.0 m 2.0 m

CTS 710 1 Crawford 1980 3.7 m 5.0 m

CTS 710 2 Braselmann 2006 4.0 m 5.0 m

CTS 710 3 Crawford 1980 3.8 m 3.7 m

CTS 713 1 Porvene unknown 4.0 m 5.0 m

CTS 713 2 unknown unknown 5.0 m 3.5 m

CTS 713 3 unknown unknown 4.0 m 3.0 m

CTS 713 4 unknown unknown 4.0 m 3.0 m

CTS 713 5 Porvene unknown 5.0 m 3.5 m

CTS 713 6 unknown unknown 4.0 m 3.0 m

CTS 713 7 unknown unknown 4.0 m 3.0 m

CTS 713 8 unknown unknown 4.0 m 3.0 m

CTS

MFH 720 1 Guenther 1985 4.0 m 3.5 m

MFH 720 2 Crawford 2005 2.5 m 3.0 m

MFH 720 3 Crawford 2005 2.5 m 3.0 m

MFH 720 4 Crawford 2005 2.0 m 3.0 m

MFH 720 5 Crawford 2005 2.0 m 3.0 m

MFH 720 6 Crawford 2005 2.0 m 3.0 m

MFH 720 7 Crawford 2005 2.5 m 3.0 m

MFH 741 1 Crawford 2005 3.5 m 3.8 m

MFH 741 2 Crawford 2005 5.0 m 3.8 m

MFH 741 3 Crawford 2005 5.0 m 3.8 m

MFH 741 4 Crawford 2005 5.0 m 3.8 m

MFH 749 1 Guenther 1980 3.0 m 4.5 m

MFH 749 2 Guenther 1980 4.0 m 5.0 m

MFH 749 3 Hoermann 1985 4.0 m 5.0 m

MFH 749 4 Hoermann 1985 4.0 m 5.0 m

MFH 749 5 Hoermann 1985 4.0 m 5.0 m

MFH 749 6 Hoermann 2005 3.0 m 4.0 m

MFH 749 7 Hoermann 2005 3.0 m 4.0 m

MFH 751 1 Gries 2006 3.5 m 3.0 m

MFH 751 2 Gries 2006 4.0 m 4.0 m

MFH 755 1 Guenther 1983 3.5 m 3.5 m

MFH 755 2 Crawford 2005 3.5 m 3.0 m

MFH 755 3 Crawford 1985 4.0 m 3.5 m

MFH 755 4 Crawford 1975 4.0 m 3.5 m

MFH 755 5 Crawford 1975 4.0 m 3.5 m

MFH 755 6 Crawford 1985 4.0 m 3.5 m

MFH 755 7 Crawford 1985 4.0 m 3.5 m

MFH 755 8 Crawford 1985 4.0 m 3.5 m

MFH 755 9 Crawford 1985 4.0 m 3.5 m

MFH 755 10 Crawford 1985 4.0 m 3.5 m

MFH

SVS

Out Door Reck 2-1 Hörmann 2006 3.0 m 3.0 m

SVS

Out Door Reck 2-2 Hörmann 2006 3.0 m 3.0 m

SVS

Out Door Reck 2-3 Hörmann 2006 3.0 m 3.0 m

SVS

Out Door Reck 2-4 Hörmann 2006 3.0 m 3.0 m

SVS

Out Door Reck 2-5 Hörmann 2006 3.0 m 3.0 m

SVS

Out Door Reck 2-6 Hörmann 2006 3.0 m 3.0 m

SVS

Macaroni Grill 1-23

Hörmann, Rollgitter

2006 4.0 m 8.0 m

SVS

Chili's too 1-22 Jansen, Rollgitter 2005 4.0 m 8.0 m

SVS

AMXS 2356 1 Günther 1997 6.0 m 4.0 m

AMXS 2356 2 Günther 1997 6.0 m 4.0 m

AMXS 2356 3 Günther 1997 6.0 m 4.0 m

AMXS 2356 4 Günther 1997 6.0 m 4.0 m

AMXS 2356 5 Günther 1997 6.0 m 4.0 m

AMXS 2356 6 Hörmann 2012 3.0 m 4.5 m

AMXS

APS 2326 1 Gries 1997 6.0 m 5.0 m

APS 2326 2 Gries 1997 6.0 m 5.0 m

APS 2326 3 Gries 1997 6.0 m 5.0 m

APS 2326 4 Gries 1997 6.0 m 5.0 m

APS 2326 5 Gries 2012 6.0 m 5.0 m

APS 2326 6 Gries 2012 6.0 m 5.0 m

APS 2326 7 Gries 2012 6.0 m 5.0 m

APS 2326 8 Gries 2012 6.0 m 5.0 m

APS 2329 1 Marantel 2014 6.0 m 5.0 m

APS 2329 2 Crawford 1997 6.0 m 5.0 m

APS 2329 3 Crawford 1999 6.0 m 6.0 m

APS 2395 1 Hörmann 2010 4.0 m 6.0 m

APS 2395 2 Lindab unknown 5.0 m 4.0 m

APS 2395 3 unknown 2007 3.0 m 4.0 m

APS 3333 1 unknown unknown 1.3 m 1.0 m

APS 3333 2 unknown unknown 1.3 m 1.0 m

APS 3334 1 Hörmann 2004 3.6 m 3.6 m

APS 3334 2 Hörmann 2004 3.5 m 3.5 m

APS 3334 3 Hörmann 2004 3.5 m 3.5 m

APS 3334 4 Hörmann 2004 3.5 m 3.5 m

APS 3334 5 Hörmann 2004 3.5 m 3.5 m

APS 3334 6 Hörmann 2004 3.5 m 3.5 m

APS 3334 7 Hörmann 2004 3.5 m 3.5 m

APS 3334 8 Hörmann 2004 3.4 m 3.4 m

APS 3334 9 Hörmann 2004 3.4 m 3.4 m

APS 3334 10 Hörmann 2004 3.5 m 3.5 m

APS 3334 11 Hörmann 2004 3.4 m 3.4 m

APS 3334 12 Hörmann 2004 3.4 m 3.4 m

APS 3334 13 Hörmann 2004 3.5 m 3.4 m

APS 3334 14 Hörmann 2003 3.5 m 3.0 m

APS 3334 15 Hörmann 2003 3.5 m 3.0 m

APS 3334 16 Hörmann 2003 3.5 m 3.0 m

APS 3334 17 Hörmann 2003 3.5 m 3.0 m

APS 3334 18 Hörmann 2003 3.5 m 3.0 m

APS 3334 19 Hörmann 2003 3.5 m 3.0 m

APS 3334 20 Hörmann 2003 3.5 m 3.0 m

APS 3334 21 Hörmann 2003 3.5 m 3.0 m

APS 3334 22 Hörmann 2003 3.0 m 3.0 m

APS 3334 23 Hörmann 2003 3.5 m 3.0 m

APS 3334 24 Hörmann 2003 3.5 m 3.0 m

APS 3334 25 Hörmann 2003 3.5 m 3.0 m

APS 3334 26 Hörmann 2003 3.5 m 3.0 m

APS 3334 27 Hörmann 2003 3.5 m 3.0 m

APS 3334 28 Hörmann 2003 3.5 m 3.0 m

APS 3334 29 Hörmann 2003 3.5 m 3.0 m

APS 3334 30 Hörmann 2003 3.5 m 3.0 m

APS 3334 31 Hörmann 2003 3.5 m 3.0 m

APS 3334 32 Hörmann 2003 3.5 m 3.0 m

APS 3334 33 Hörmann 2005 5.0 m 4.5 m

APS 3334 34

Hörmann

Brandschutztür 2004 3.5 m 3.4 m

APS 3334 35 Hörmann 2003 3.5 m 3.5 m

APS 3334 36 Hörmann 2003 3.5 m 3.5 m

APS 3334 37 Hörmann 2003 3.5 m 3.5 m

APS 3334 38 Hörmann 2003 3.5 m 3.5 m

APS 3334 39 Hörmann 2003 3.5 m 3.5 m

APS 3334 40 Hörmann 2003 3.5 m 3.5 m

APS 3334 41 Hörmann 2003 3.5 m 3.5 m

APS 3334 42 Hörmann 2003 3.5 m 3.5 m

APS 3334 43 Hörmann 2003 3.5 m 3.5 m

APS 3334 44 Hörmann 2003 3.5 m 3.5 m

APS 3334 45 Hörmann 2003 3.4 m 3.5 m

APS 3334 46 Hörmann 2003 3.5 m 3.5 m

APS 3334 47 Hörmann 2003 3.5 m 3.5 m

APS 3334 48 Hörmann 2003 3.5 m 3.5 m

APS 3334 49 Hörmann 2003 3.5 m 3.5 m

APS 3334 50 Hörmann 2003 3.5 m 3.5 m

APS 3334 51 Hörmann 2003 3.5 m 3.5 m

APS 3334 52 Hörmann 2003 3.5 m 3.5 m

APS 3334 53 Hörmann 2003 3.5 m 3.5 m

APS 3334 54 Hörmann 2003 3.5 m 3.5 m

APS 3334 55 Hörmann 2003 3.5 m 3.5 m

APS 3334 56 Hörmann 2003 3.5 m 3.5 m

APS 3334 57 Hörmann 2003 3.5 m 3.5 m

APS 3334 58 Hörmann 2003 3.5 m 3.5 m

APS 3334 59 Hörmann 2003 3.5 m 3.5 m

APS 3334 60 Hörmann 2003 3.5 m 3.5 m

APS 3334 61 Hörmann 2010 3.5 m 3.5 m

APS 3334 62 Hörmann 2008 3.5 m 3.5 m

APS 3334 63 Albany Folientor 2004 3.5 m 3.5 m

APS 3334 64 Albany Folientor 2004 3.5 m 3.5 m

APS 3334 65 Albany Folientor 2004 3.5 m 3.5 m

APS 3334 66 Hörmann 2004 3.5 m 3.4 m

APS 3334 67 Hörmann 2004 3.5 m 3.5 m

APS 3453 1 BN Tortechnik 2010 6.0 m 5.0 m

APS 3453 2 BN Tortechnik 2010 6.0 m 5.0 m

APS 3453 3 BN Tortechnik 2010 6.0 m 5.0 m

APS 3453 4 BN Tortechnik 2010 4.0 m 3.0 m

APS 3453 5 BN Tortechnik 2010 6.0 m 5.0 m

APS 3453 6 BN Tortechnik 2010 6.0 m 5.0 m

APS

APPENDIX D – CURRENT AUTOAMTIC OPENING DOOR LIST

Total of Automatic Opening Doors: 78

LOCATION MANUFACTURER

MODEL/TYPE

YEAR

BUILT

REMARKS

RAMSTEIN

1 Bldg 100 DITEC.IT

BISOCTA/16

EL

1 wing sliding door inside

Bldg 302

Officer Club Geze TSA 160 N 2009

2 wing swinging door inside

Bldg 302

Officer Club Geze TSA 160 N 2009

2 wing swinging door outside

Bldg 305

Ramstein Inn Geze

TSR 350N

SMD

unknown

2 wing sliding door inside

Bldg 305

Ramstein Inn Geze