Statement of Objectives Weight Balance Scales Amend 01.pdf

Amended Statement of Objective (SOO) 01 for

F-35 Weight and Balance Scales Misawa Air Base, Japan

1. PURPOSE

The purpose of this acquisition is to purchase two (2) AC30-60 RFX 4-120 Platform Scale Systems.

These roll-on platform scales are a fundamental tool for operating F-35 aircraft. It provides all necessary data to ensure safety, comply with aviation regulations, and optimize efficiency for 35 MXG.

2. TECHNICAL REQUIREMENTS

The Weight and Balance Scales must meet or exceed the requirements of Intercomp Platform Scale System.

ITEM # 140042-RFX

1. Four - 30,000 lbs. (15,000 kg) capacity scales

2. Safe Overload Accuracy 150% of capacity

3. Accuracy meets Mil Spec of ±0.1% Accuracy of applied load or 5 lbs.; whichever is greater

4. Overall Scale dimensions 34”x34”x4” (NOT Low Profile). Scale height must be 4 inches to qualify with AEI

5. Intrinsically Safe - Hazardous Environments. The aircraft scales shall be used in hazardous locations as defined by the NFPA 70 National Electrical Code (NEC) Article 500/513 and are thus required by OSHA 1910.307. Safety standards to be certified to NEC equipment requirements by an OSHA designated Nationally Recognized Testing Lab (NRTL) and labeled with the NRTL mark to meet the OSHA and NEC requirements for Class I, Div. 1&2, Group C&D environments. If offering an alternate brand/model, a copy of the certification issued by an OSHA designated Nationally Recognized Testing Laboratory is required with submission of offers.

6. Built in Wireless Communication with CPU's and Wi-Fi Converter of the same brand for up to 100m line of sight. No antennas or external communication devices.

7. Fully Electronic Stainless Steel Shear Beam Load Cells with Temperature Compensation for operating temperature of 0 to 130 degrees Fahrenheit.

8. Auto Leveling for use on uneven surfaces up to 2 degrees.

9. 1-inch (25mm)-high LCD six-digit self-contained display with back light.

10. Functions for Latitude/Altitude correction, self-diagnostics, and scale address.

11. Maximum four alkaline C size batteries power scale for up to 200 hours

12. Calibrate using a maximum of 3-point span and full verification, correction and 3 test runs within 30 minutes using TMDE automated force calibration press.

13. Calibration Interval- one year

14. Minimum platform size- 24x30 in (61cmx 76cm

15. Minimum Height- 4 in (10cm)

16. Kit to include

• Four (4) Platform Scales

• Four (4) Ramps

• Four (4) Tire Stops

• One (1) Transport Cart

3. DELIVERY REQUIREMENTS

3.1 TIMEFRAME

Misawa Air Base requests the Weight and Balance Scales no later than 90 Days ARO.

3.2 DELIVERY DELAYS

Contractors are required to meet the timeframes as stated in section 3.1 unless approval and/or review activities prevent the contractor from meeting these timeframes. In the event that the contractor determines they are unable to achieve the stated timeframes, the contractor shall notify the Contracting Officer within two (2) business days of such determination, or immediately upon such determination if operating under the Emergency/War Tempo timelines.

4. SHIPPING INFORMATION- DIRECT SHIPPING TO MISAWA AIRBASE REQUIRED

FOR UPS/FedEx/DHL

35MXG UNIT 3016

APO, AP 96319-5042

FOR USPS SHIPMENT:

APO Address:

FB5205

35 LRS/LGRDDC MISAWA AB BLDG 1334

MISAWA CITY AOMORIKEN JP 033 0012

FOR UPS/FEDEX/DHL/Freight SHIPMENT:

Physical Address:

35 LRS/LGRMMB

UNIT 5014, BLDG 1334, MISAWA

AIR BASE 64 HIRAHATA,

MISAWA-SHI, AOMORI-KEN

JAPAN 033-0012

MARK FOR: TSgt Colton Bennett, Email: Colton.bennett@us.af.mil, DSN: 315-226-1705 mailto:Colton.bennett@us.af.mil