Attachment 1- Statement of Objectives (Amendment 2 26 Feb 26).pdf
PDF 75 KB Posted
- Attached to
- Misawa AB Panel Racks
- Solicitation number
- FA520526QB032
About this file
This is a Statement of Objectives for FGS Panel Racks at Misawa Air Base, Japan. The document outlines requirements for 16 aircraft parts storage racks with foam padding, updated through Amendment 2 dated 26 February 2026. The primary objective is to deliver storage racks with adequate foam padding to prevent damage to sensitive aircraft components.
The performance requirements specify shelving units with a steel frame and minimum 1-inch foam padding on all shelving surfaces. Dimensional specifications include height not to exceed 85 inches (revised from 70"-76"), width 40"-45", and length 96"-98", with each shelf 36 inches apart. Units must weigh no more than 750 pounds and have a total capacity of at least 1,000 pounds, with each individual shelf holding a minimum of 330 pounds. Additional requirements include shelves with no lip design, black or black foam padding, units in black or red color, and four locking wheels. Foam padding must extend 1 inch past the top of each shelf. All units must be shipped fully assembled directly to Misawa Air Base, Japan, with shipment details addressed in the associated RFQ.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Objectives 13 FGS Panel Racks Misawa
AB, Japan
Amendment 1-20 Feb 2026
Amendment 2- 26 Feb 2026
Summary of Changes:
Amendment 2: Height is changed from 70"-76" to 70'- will not exceed 85 inches, Vertical Clearance will not exceed 85 inches
(Amendment 1) Shelves will not have a lip, units will be black or red, units will have 4 wheels that lock, and units will ship assembled.
REQUIREMENT:
Misawa AB, Japan requires 16 Aircraft Parts Racks with Foam.
Project Objective:
To deliver 16 storage racks that have adequate foam padding to prevent damage to the aircraft parts that will be placed on the units.
PERFORMANCE REQUIREMENTS:
The vendor shall deliver shelving units that fit the below description:
Height: 70”-76” Width: 40”-45” Length: 96”-98” Weight: no more than 750 lbs Vertical Clearance: no more than 76” Capacity: at least 1000 lbs- each shelf shall hold a minimum of 330lbs Material: Steel frame with minimum of 1-inch foam padding on shelving to protect sensitive coatings of components. Each shelf will have foam padding that extends 1 inch past the top _highest_______ li p _of the shelf. Shelves will be flat with no "lip".
Shelving Units will be black or red.
Foam is black.
The unit will be on 4 wheels that lock.
Each shelf will be 36 inches apart.
Shipment is addressed in the RFQ and is to be direct shipping to Misawa AB, JP.
Units will be shipped fully assembled.
Quality Control:
Contractor shall address any deficiency or delegation in a timely manner.
Will not exceed 85 inches___
Will not exceed 85 inches_______________
File details come from the government source that posted it. Updated .