Attachment 1- Statement of Objectives (Amendment 1 20 Feb 26).pdf
PDF 182 KB Posted
- Attached to
- Misawa AB Panel Racks
- Solicitation number
- FA520526QB032
About this file
This is a Statement of Objectives for aircraft parts storage racks required by Misawa Air Base, Japan. The document outlines Amendment 1 dated 20 February 2026, which specifies that shelves will not have lips, units will be black or red, units will have four locking wheels, and units will ship fully assembled.
Misawa AB requires 16 aircraft parts racks with foam padding to prevent damage to sensitive aircraft components. The shelving units must meet specific dimensional and weight requirements: height between 70–76 inches, width between 40–45 inches, length between 96–98 inches, and weight not exceeding 750 pounds. Each unit shall have a total capacity of at least 1,000 pounds, with individual shelves capable of holding a minimum of 330 pounds. The units must feature a steel frame with minimum 1-inch foam padding on all shelving surfaces, with foam extending 1 inch past the top edge of each shelf. Shelves must be spaced 36 inches apart. The shelving units will be black or red with black foam padding and mounted on four locking wheels. Shipment will be direct to Misawa AB, Japan, with units delivered fully assembled. The contractor is responsible for addressing any deficiencies or delegated items in a timely manner as part of quality control requirements.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Objectives 13 FGS Panel Racks
Misawa AB, Japan
Amendment 1-20 Feb 2026
Summary of Changes: Shelves will not have a lip, units will be black or red, units will have 4 wheels that lock, and units will ship assembled.
REQUIREMENT:
Misawa AB, Japan requires 16 Aircraft Parts Racks with Foam.
Project Objective:
To deliver 16 storage racks that have adequate foam padding to prevent damage to the aircraft parts that will be placed on the units.
PERFORMANCE REQUIREMENTS:
The vendor shall deliver shelving units that fit the below description:
Height: 70”-76” Width: 40”-45” Length: 96”-98” Weight: no more than 750 lbs Vertical Clearance: no more than 76” Capacity: at least 1000 lbs- each shelf shall hold a minimum of 330lbs Material: Steel frame with minimum of 1-inch foam padding on shelving to protect sensitive coatings of components. Each shelf will have foam padding that extends 1 inch past the top _highest________ lip of the shelf. Shelves will be flat with no "lip".
Shelving Units will be black or red.
Foam is black.
The unit will be on 4 wheels that lock.
Each shelf will be 36 inches apart.
Shipment is addressed in the RFQ and is to be direct shipping to Misawa AB, JP.
Units will be shipped fully assembled.
Quality Control:
Contractor shall address any deficiency or delegation in a timely manner.
File details come from the government source that posted it. Updated .