Attachment 1- Statement of Objectives (1).pdf
PDF 63 KB Posted
- Attached to
- Misawa AB Panel Racks
- Solicitation number
- FA520526QB032
About this file
This is a Statement of Objectives for the procurement of 16 aircraft parts storage racks with foam padding for Misawa Air Base, Japan. The primary objective is to deliver storage racks equipped with adequate foam padding to prevent damage to sensitive aircraft components during storage.
The performance requirements specify shelving units with the following parameters: height between 70"-76", width between 40"-45", and length between 96"-98", with a maximum weight of 750 lbs and vertical clearance not exceeding 76". Each unit must have a total capacity of at least 1,000 lbs, with individual shelves capable of holding a minimum of 330 lbs. The units shall feature a steel frame with a minimum of 1-inch foam padding on all shelving surfaces to protect sensitive component coatings, with foam extending 1 inch past the highest shelf lip. Shelves must be spaced 36 inches apart. Direct shipment to Misawa AB, Japan is required, with detailed shipping terms addressed in the associated RFQ. The contractor is responsible for addressing any deficiencies or deviations in a timely manner as part of quality control obligations.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Objectives 13 FGS Panel Racks
Misawa AB, Japan
REQUIREMENT:
Misawa AB, Japan requires 16 Aircraft Parts Racks with Foam.
Project Objective:
To deliver 16 storage racks that have adequate foam padding to prevent damage to the aircraft parts that will be placed on the units.
PERFORMANCE REQUIREMENTS:
The vendor shall deliver shelving units that fit the below description:
Height: 70”-76” Width: 40”-45” Length: 96”-98” Weight: no more than 750 lbs Vertical Clearance: no more than 76” Capacity: at least 1000 lbs- each shelf shall hold a minimum of 330lbs Material: Steel frame with minimum of 1-inch foam padding on shelving to protect sensitive coatings of components. Each shelf will have foam padding that extends 1 inch past the highest lip of the shelf.
Each shelf will be 36 inches apart.
Shipment is addressed in the RFQ and is to be direct shipping to Misawa AB, JP.
Quality Control:
Contractor shall address any deficiency or delegation in a timely manner.
File details come from the government source that posted it. Updated .