Attach 3 Cascade Wage Determination.docx

Attachment 3 FA4626-12-R-0005 General Decision Number: MT120067 02/03/2012 MT67

Superseded General Decision Number: MT20100077

State: Montana

Construction Type: Heavy

County: Cascade County in Montana.

HEAVY CONSTRUCTION PROJECTS

Modification Number Publication Date 0 01/06/2012 1 01/20/2012 2 01/27/2012 3 02/03/2012

CARP0286-004 06/01/2011

Rates Fringes

CARPENTER (Including Formwork)...$ 24.25 9.98

Zone Definition:

The hourly rate applicable to each project is determined by measuring the road miles over the shortest practical route from the County Courthouse of the following towns to the ceter of the job: Billings, Bozeman, Butte, Great Falls, Helena, Kalispell, Lewiston, Miles City, and Missoula

Zone 1: 0 to 30 miles - Base Rate Zone 2: 31 to 60 miles - $3.70 Zone 3: over 60 miles - $5.60

ELEC0233-017 06/01/2011

Rates Fringes

ELECTRICIAN......................$ 28.26 10.99

ENGI0400-006 07/29/2011

Rates Fringes

POWER EQUIPMENT OPERATOR:

(Zone 1)

(1) A-frame truck Crane, Forklift, oiler (except crane)......................$ 23.47 10.40

(2) Excavator, Crane Oiler..$ 23.94 10.40

(3) Mechanic, Scraper.......$ 24.34 10.40

(4) Cranes 25-44 tons.......$ 25.00 10.40

(5) Cranes 45-74 tons.......$ 25.50 10.40

(6) Cranes 75 to 144 tons, whirley cranes..............$ 26.60 10.40

(7) Cranes, 150 tons to including 250 tons (add $1.00 for every 100 tons over 250 tons); Crane, Stiff- Leg or

Derrick; Helicopter Hoist; Crane, Tower (all)...$ 27.10 10.40

ZONE DEFINITIONS FOR POWER EQUPMENT OPERATORS:

The zone hourly rates applicable to each project shall be determined by measuring the road miles over the shortest practical maintained route from the nearest County Court House of the following listed towns to the center of the job:

BILLINGS, BOZEMAN, BUTTE, GREAT FALLS, HELENA, KALISPELL,

MISSOULA

Zone 1: 0 to 30 miles - Base Pay Zone 2: 30 to 60 miles - Base Pay + $3.50 Zone 3: Over 60 miles - Base Pay + $5.50

* IRON0732-017 06/01/2011

Rates Fringes

IRONWORKER: Reinforcing and Structural.......................$ 25.75 18.38

PLUM0041-014 07/01/2011

Rates Fringes

PLUMBER..........................$ 27.85 11.40

SUMT2011-042 02/07/2011

Rates Fringes

LABORER: Common or General......$ 17.99 5.90

OPERATOR: Asphalt Roller........$ 22.39 3.96

OPERATOR: Backhoe...............$ 21.99 8.55

OPERATOR: Bobcat/Skid Loader....$ 25.67 8.05

OPERATOR: Loader (Front End)....$ 22.67 6.54

PAINTER: Brush and Spray Only...$ 25.00 0.00

TRUCK DRIVER: Dump Truck........$ 19.38 4.74

* TEAM0190-001 05/01/2011

Rates Fringes

TRUCK DRIVER

(2) Water Truck

ZONE A.....................$ 24.94 6.97

ZONE B (30-60 miles from County Courthouse of listed cities*): Add $3.05 per hour to ZONE A rates ZONE C (over 60 miles from County COurthouse of listed cities*): Add $4.85 per hour to ZONE A rates.

*Zone pay will be calculated from the city center of the following listed cities:

BILLINGS

BOZEMAN

BUTTE

GREAT FALLS

HELENA

KALISPELL

MISSOULA

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is union or non-union.

Union Identifiers

An identifier enclosed in dotted lines beginning with characters other than "SU" denotes that the union classification and rate have found to be prevailing for that classification. Example: PLUM0198-005 07/01/2011. The first four letters , PLUM, indicate the international union and the four-digit number, 0198, that follows indicates the local union number or district council number where applicable , i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. The date, 07/01/2011, following these characters is the effective date of the most current negotiated rate/collective bargaining agreement which would be July 1, 2011 in the above example.

Union prevailing wage rates will be updated to reflect any changes in the collective bargaining agreements governing the rate.

Non-Union Identifiers

Classifications listed under an "SU" identifier were derived from survey data by computing average rates and are not union rates; however, the data used in computing these rates may include both union and non-union data. Example: SULA2004-007 5/13/2010. SU indicates the rates are not union rates, LA indicates the State of Louisiana; 2004 is the year of the survey; and 007 is an internal number used in producing the wage determination. A 1993 or later date, 5/13/2010, indicates the classifications and rates under that identifier were issued as a General Wage Determination on that date.

Survey wage rates will remain in effect and will not change until a new survey is conducted.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION