Atch_4_Technical_Response_Questionaire_20191010.docx

VEHICLE CORROSION CONROL

TECHNICAL RESPONSE QUESTIONNAIRE

Source Selection Sensitive (when filled-out) IAW FAR 2.101 and FAR 3.104

INSTRUCTIONS: For each sub-factor below, in the first table provide a detailed description of specific tasks performed for that sub-factor that correspond to your “Project References” 1, 2, 3. Use the reference table to provide at least one but up to three (3) references per sub-factor to support the experience claimed in the first table. [Reference Addendum to FAR 52.212-1, Paragraph C.1.(a)].

Factor 1: Three (3) years of experience providing specific vehicle corrosion control tasks within the last three (3) years preceding the release of this request for proposal. Provide detailed information in performing each of the specific large vehicle corrosion control tasks described in sub-factors 1a through 1e inclusive of RFP Attachment 4. Provide reference(s) and contact information to support the experience claimed by offeror.

To Be Considered Technically Acceptable for Factor 1: The contractor’s responses evidence that the contractor has three (3) years of experience performing each of the specific maintenance tasks described in sub-factors 1a through 1e within the last three (3) years preceding the release of this request for proposal. References provided must support the experience claimed by offeror.

Sub-Factor 1a – Washing/Cleaning All Surfaces: At least three (3) years of experience performing the vehicle corrosion control task identified below within the last three (3) years preceding the release of this request for proposal. Use the narrative block in the first table to provide a detailed description of specific tasks (i.e. surfaces are free of foreign materials such as wax, dirt, dust, corrosion, etc.) performed for below item that corresponds to your referenced projects (i.e. ref. #1,2,3).

Washing/Cleaning All Surfaces (ref. para 1.1.1, PWS)

|_| Yes |_| No

Narrative:

At least one reference but no more than 3 references for sub-factor 1a.

Project Reference #1 for sub-factor 1a

(Firm Fixed Price [FFP] or Cost)

Check as appropriate

|_| P |_| S

POC Name:

Phone #:

Email:

Project Reference #2 for sub-factor 1a(leave blank if N/A)

(Firm Fixed Price [FFP] or Cost)

|_| P |_| S

POC Name:

Project Reference #3 for sub-factor 1a (leave blank if N/A)

(Firm Fixed Price [FFP] or Cost)

|_| P |_| S

POC Name:

Sub-Factor 1b – Surface Preparation: At least three (3) years of experience within the last three (3) years preceding the release of this request for proposal. Use the narrative block to provide a detailed description of specific tasks (i.e. sandblasting) performed below that corresponds to your referenced projects (i.e. ref. #1,2,3).

Surface Preparation (ref. para 1.1.2, PWS)

Narrative:

At least one reference but no more than 3 references for sub-factor 1b.

Project Reference #1 for sub-factor 1b

(Firm Fixed Price [FFP] or Cost)

|_| P |_| S

POC Name:

Project Reference #2 for sub-factor 1b (leave blank if N/A)

(Firm Fixed Price [FFP] or Cost)

|_| P |_| S

POC Name:

Project Reference #3 for sub-factor 1b (leave blank if N/A)

(Firm Fixed Price [FFP] or Cost)

|_| P |_| S

POC Name:

Sub-Factor 1c – Repairing Damaged Metal: At least three (3) years of experience within the last three (3) years preceding the release of this request for proposal. Use the narrative block to provide a detailed description of specific tasks (i.e. metal repair) performed for below item that corresponds to your referenced projects (i.e. ref. #1,2,3).

Repairing Damaged Metal (ref. para 1.1.3, PWS)

Narrative:

At least one reference but no more than 3 references for sub-factor 1c.

Project Reference #1 for sub-factor 1c

(Firm Fixed Price [FFP] or Cost)

|_| P |_| S

POC Name:

Project Reference #2 for sub-factor 1c (leave blank if N/A)

(Firm Fixed Price [FFP] or Cost)

|_| P |_| S

POC Name:

Project Reference #3 for sub-factor 1c (leave blank if N/A)

(Firm Fixed Price [FFP] or Cost)

|_| P |_| S

POC Name:

Sub-Factor 1d – Prime and Seal Surfaces: At least three (3) years of experience within the last three (3) years preceding the release of this request for proposal. Use the narrative block to provide a detailed description of specific tasks (i.e. application of primer/sealant) performed for below item that corresponds to your referenced projects (i.e. ref. #1,2,3).

Prime and Seal Surfaces (ref. para 1.1.4, PWS)

Narrative:

At least one reference but no more than 3 references for sub-factor 1d.

Project Reference #1 for sub-factor 1d

(Firm Fixed Price [FFP] or Cost)

|_| P |_| S

POC Name:

Project Reference #2 for sub-factor 1d (leave blank if N/A)

(Firm Fixed Price [FFP] or Cost)

|_| P |_| S

POC Name:

Project Reference #3 for sub-factor 1d (leave blank if N/A)

(Firm Fixed Price [FFP] or Cost)

|_| P |_| S

POC Name:

Sub-Factor 1e – Paint All Exposed Surfaces: At least three (3) years of experience within the last three (3) years preceding the release of this request for proposal. Use the narrative block to provide a detailed description of specific tasks (i.e. application of paint) performed for below item that corresponds to your referenced projects (i.e. ref. #1,2,3).

Paint All Exposed Surfaces (ref. para 1.1.6, PWS)

Narrative:

At least one reference but no more than 3 references for sub-factor 1e

Project Reference #1 for sub-factor 1e

(Firm Fixed Price [FFP] or Cost)

|_| P |_| S

POC Name:

Project Reference #2 for sub-factor 1e (leave blank if N/A)

(Firm Fixed Price [FFP] or Cost)

|_| P |_| S

POC Name:

Project Reference #3 for sub-factor 1e (leave blank if N/A)

(Firm Fixed Price [FFP] or Cost)

|_| P |_| S

POC Name:

Factor 2: Teaming Arrangement Information (if applicable) – If your company is not performing ALL the work, you must explain the contemplated teaming arrangement. This includes, but is not limited to, the following types of teaming relationships: prime/sub-contractor, mentor/protégé, joint venture, etc. If a teaming arrangement is not applicable and ALL the work will be performed by your company as the prime contractor, please indicate N/A as your response.

To Be Considered Technically Acceptable for Factor 2: The contractor’s response provides sufficient information to determine whether or not the contactor contemplates a teaming arrangement and, if so, indicates the name of each teaming partner (i.e. subcontractor), identifies the tasks and the percentage of work to be performed by each party (i.e. prime and subcontractor), and provides sufficient information for the Government to determine that the offeror as a whole (i.e. prime/sub combined) has the ability to perform the requirements of this solicitation.

(i.e. mentor/protégé, joint venture, etc) Percentage of Work Performed by Teaming Partner (i.e. 20%) Work Description Teaming Partner Would Perform (i.e. prime/seal, project management, etc.)

(i.e. prime/seal, project management, etc.)

Factor 3: – Physical Address – Offeror must perform or have the ability to perform all services described in Attachment 1 Performance Work Statement within 100 road miles of Vandenberg AFB, CA.

To Be Considered Technically Acceptable for Factor 3: The contractor’s response provides sufficient information to determine whether or not the contactor has access to facilities within 100 road miles of Vandenberg AFB, CA necessary to complete work described in attachment 1 Performance Work Statement. Any quote submitted by an offorer unable to perform services within 100 road miles of Vandenberg AFB will be determined techinally unaceptable.

Physical Address Where Work will be completed

Street Address:

City & State:

Zip Code:

Miles from Vandenberg AFB

FOR OFFICIAL USE ONLY (FOUO) FA4610-20-Q-0003

Attachment 4 Technical Experience Questionnaire