621_Aviation Simulator_Performance Work Statement.docx

PERFORMANCE WORK STATEMENT

621st Air Mobility Advisory Group

1.1 SCOPE OF WORK

The Contractor shall furnish all personnel and equipment needed to complete Cessna 208B with G-1000 avionics suite simulator training.

SPECIFIC TASKS

1.2.1 621 AMAG FLIGHT SIMULATOR CONTRACT

1.2.1.1 The contractor shall work with 621 AMAG Chief Pilot and Maintenance Lead to schedule all necessary recurrent simulator training events within 30 days of receipt of request.

1.3 ESTIMATED WORKLOAD

1.3.1 Vendor needs to be able to conduct approximately 20 training events with no more than 45 events per year to meet recurrent training requirements.

2. QUALIFICATION/EDUCATION REQUIREMENTS:

2.1 621 AMAG FLIGHT SIMULATOR CONTRACT QUALIFICATION

2.1.1 The company selected needs to be a 14 CFR Part 142 approved Training Center with Cessna 208 simulators equipped with the G1000 avionics suite.

2.1.2 Training portal that allows for the scheduling of training, shows upcoming training availability, as well as provides access to student record and diplomas.

2.1.3 Provide access to pre-study training materials 30 days prior to the start of their training.

2.1.4 Access to current publications, to include checklists, aircraft manuals, memory action cards and cockpit posters for minimum of 12 months prior to completion of training.

2.1.5 Training vendor should have approval to perform flight training from Textron Aviation products as an Approved Training Organization

2.1.6 Access to a fully functional desk top training allow them to become more proficient with the G-1000 avionics suite.

2.1.7 Contractor will use 3D video simulator-training debriefing tools to reproduce training events for examination and analysis.

3. CERTIFICATION AND TRAINING:

3.1. Training vendor will hold an Approval as a training organization by Textron Aviation

4. GENERAL INFORMATION:

4.1 Contractor personnel shall always present a neat and professional appearance.

4.2 Contractor employees shall speak, read, write, and understand the English language in fulfilling the requirements of this PWS.

5. GOVERNMENT PROVIDED FACILITIES, EQUIPMENT, AND SERVICES:

The Government is not responsible for providing any facilities or equipment.

6. CORE DUTY HOURS:

6.1 Standard operating hours are Monday through Friday between the hours of 0730 - 1630 local time excluding federal holidays. As required, it may be necessary to adjust the core duty hours, as required by the vendor to support access to training simulators.

8. FEDERAL HOLIDAYS:

The following is a listing of the Federal Holidays observed by the USG:

New Year’s Day 1 January Martin Luther King’s Birthday 3rd Monday in January Presidents’ Day 3rd Monday in February Memorial Day Last Monday in May Juneteenth, 19 June Independence Day 4 July Labor Day 1st Monday in September Columbus Day 2nd Monday in October Veterans Day 11 November Thanksgiving Day 4th Thursday in November Christmas Day 25 December And any Federal Holiday declared by the President of the United States

NOTE: When any of the above holidays fall on a Saturday, they will be observed on the preceding Friday; when the holiday falls on a Sunday it will be observed on the following Monday. Down days or Family Days declared by the AMC Commander are considered duty days and are not included in the definition of a holiday.

9. Contractor Travel/Temporary Duty-TDY:

9.1 No Contractor Travel is expected. If a situation arises where travel is needed, all travel will be processed and reimbursed in accordance with the Joint Travel Regulations.