Attachment 5 - RFIs and Answers - 20 Aug 26.pdf
PDF 44 KB Posted
- Attached to
- 60" Concrete Saw & Diamond Blade
- Solicitation number
- FA441926Q0029
About this file
This file contains Questions and Answers (Q&A) for federal contract opportunity FA441926Q0029, addressing clarifications on equipment specifications for a concrete cutting saw procurement.
The primary product requirement is a Husqvarna FS 7000 DL concrete saw with specific performance criteria. Key clarifications include: manufacturer-rated wet-only operation is acceptable and preferred over dry cutting; maximum blade speed must meet a minimum of 1,430 RPM (not exactly 1,430 RPM or maximum cap); the Husqvarna MPN 970750601 rated at 1,373 RPM does not meet the technical requirements due to insufficient blade speed; the saw must include a blade clutch as a mandatory component; and the 60-inch diamond blade specification for cutting reinforced concrete requires no additional PSI or aggregate specifications beyond being a diamond blade that fits the specified saw. The responses indicate strict adherence to the stated technical parameters, with particular emphasis on the blade speed minimum requirement and blade clutch inclusion.
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FA441926Q0029 RFI’s
1. Is a manufacturer-rated wet-only FS 7000 DL acceptable, or is manufacturer-rated dry cutting mandatory?
- Manufacturer rated wet only is acceptable – in fact it’s preferred.
2. Does “Max. Blade Speed 1,430 RPM” require exactly 1,430 RPM, a minimum of 1,430 RPM, or a maximum not to exceed 1,430 RPM?
- Max blade speed must be a minimum of 1430 RPM
3. Would the current Husqvarna MPN 970750601, published at approximately 1,373 RPM maximum output shaft speed, be acceptable if all other characteristics are met?
- The MPN 970750601 rated at 1,373 RPM would not be technically acceptable.
4. Attachment 4 – List specs: Based off these specs there are (2) Husqvarna saws that fit this spec, wanted clarification if you would like the saw with or without the Blade Clutch?
- Yes the saw needs to have a blade clutch
5. Based off the request for 60” Blade that cutting reinforced concrete, do you have any additional information so we can properly quote the right blade? Ie; PSI/Aggregate of concrete.
- There’s no additional information we can provide on this. The blade must be a diamond blade, 60”, and fit the saw required.
FA441926Q0029 RFI’s
File details come from the government source that posted it. Updated .