Attachment 6 - G832 Right Side of the BLDG Electrical Guide.pdf

This is an electrical plan drawing for a facility renovation or construction project. The document depicts a floor layout with various rooms including men's and women's restrooms, toilets, and multiple numbered spaces (ranging from 149-180) that appear to be office or work areas distributed throughout the facility.

The electrical specifications detail power requirements and installation standards. Key requirements include feed cubicles with 120-volt power from panel RPG, with circuits numbered 27, 28, 29, 60, 61, and 62, each rated at 20 amps and wired to a specific panel location. The plan indicates existing power receptacles in wall or floor trenches in most areas, with instructions to use manufacturer-supplied base feeds where possible. All circuitry serving systems furniture must be labeled in the panel and at outlets, with circuit numbers, voltage, and amperage clearly marked. New power circuitry should be concealed above ceilings in floor trenches unless otherwise noted. The contractor is responsible for verifying the number of existing circuits on-site. Minimum wire size is #12AWG with copper conductors, and all work must comply with NEC 2002 edition standards. The drawing includes a power legend indicating 120-volt duplex receptacles and keyed notes providing detailed installation requirements and existing infrastructure considerations.