F1T0DC9175A102_ESD_Tool_Boxes_with_Overheads_Salient_Characteristics.docx

ESD Tool Cabinet with Overheads (Alternate) 6/14/2019 ESD Tool Cabinets with Overheads (Alternate)

Please cost estimate each ESD Cabinet with Overheads matched pair as a separate line item grouping.

A) XW - Extra Wide (45”W x 27.75”D), Housing 0200, HNF:

Quantity (2), five drawers, no pallet feet, stackable.

XW - Extra Wide (45”W x 27.75”D), Housing 0245, HNF:

Quantity (2), two doors, no pallet feet, stackable.

B) ST - Standard (30”W x 27.75”D), Housing 0200, HNF:

Quantity (1), five drawers, no pallet feet, stackable.

ST - Standard (30”W x 27.75”D), Housing 0245, HNF:

Quantity (1), one door, no pallet feet, stackable.

C) ST - Standard (30”W x 27.75”D), Housing 0200, HNF:

Quantity (1), five drawers, no pallet feet, stackable.

ST - Standard (30”W x 27.75”D), Housing 0175, HNF:

Quantity (1), one door, no pallet feet, stackable.

D) SV - Small Version (22.5”W x 27.75”D), Housing 0200, HNF:

Quantity (1), five drawers, no pallet feet, stackable.

SV - Small Version (22.5”W x 27.75”D), Housing 0245, HNF:

Quantity (1), one door, no pallet feet, stackable.

Cabinet Configuration:

1. Housing size see above.

2. Housing No Feet (HNF) to lower overall height by 2.125”

3. Drawer Configurations: 5 Drawers: 70, 50, 35, 25, 20

4. ESD cable kit

5. Hinge Lock Bar (Left side)

6. Cabinet Key Lock (Right side), with individual keys for each cabinet (i.e., no master key)

7. Drawer Liners: Ribbed Vinyl Mat

8. Hanging File Kit (Quantity 1 per cabinet)

9. Attachment to stack with matching overhead cabinet (without increasing total height)

Overhead Configuration:

1. Housing size see above.

2. Housing No Feet (HNF) to lower overall height by 2.125”

3. Door configurations (vertical doors)

a. XW: Two doors; center open

b. ST: One door; left open (right hinge)

c. SV: One door; left open (right hinge)

4. ESD cable kit

5. Hinge Lock Bar (center on two door cabinets, left-side on one door cabinets)

6. Cabinet Key Lock (if it can be used separately when Hinge Lock Bar is not latched/locked).

7. Shelf: Quantity 3 per overhead

8. Shelf Liners: Ribbed Vinyl Mat

9. Attachment to stack with matching cabinet (without increasing total height), and bottom pan.

Each ESD Cabinet with Overhead shall have the following salient characteristics:

1. ESD work surfaces and ESD tops shall consist of the following:

a. ESD Static Dissipative with a bullnose front edge

b. Constructed from laminate over particle board

2. ESD Workstation shall meet the following ESD criteria:

a. Tested and certified at an open circuit voltage of 100 volts per the ESD Association.

b. Perform within the static dissipative range of 10^6 to 10^9 ohms.

i. The point (surface) to point (surface) resistance shall be greater than or equal to 1 x 106 W (1,000,000 ohms) and less than or equal to 1 x 10 9 W (1,000,000,000 ohms) when tested at 100 V DC.

ii. The point (surface) to ground point resistance shall be greater than or equal to 1 x 10 6 W (1,000,000 ohms) and less than or equal to 1 x 10 9 W (1,000,000,000 ohms) when tested at 100 V DC.

c. Compliance with the following US military guidelines: HDBK-263A, MIL-STD-1686A, MIL-HDBK-773, MIL-STD-W-87893A, T.O. 00-25-234 Section VII, AFMCI 21-XXX, MIL-STD-129.

3. Color of Workstations shall consist of the following:

a. Metal structural components of workstations shall be painted black.

b. Laminated work surfaces shall be non-painted white.