F1T0DC9175A102_ESD_Tool_Boxes_Salient_Characteristics.docx

ESD Rolling Tool Boxes 6/14/2019 ESD Rolling Tool Boxes

Please cost estimate each ESD Rolling Tool Box as a separate line item grouping.

Each ESD Rolling Tool Box shall have the following salient characteristics:

A) SV - Small Version (22.5” Wide, 27.75” Deep): Quantity (9) with low-pro caster wheels & ESD top.

1. Housing 0155: Must nest under Powered-Riser Workstations (BL1756 with 2” caster kit = ~35.02”)

2. Low-pro caster wheels (Housing No Feet “HNF”)

3. Drawer Configurations: Housing 0155: 6 Drawers: 45, 25, 25, 20, 20, 20

4. ESD Top

5. ESD Cable

6. Hinge Lock Bar (Left side)

7. Cabinet Key Lock (Right side), with individual keys for each box (i.e., no master key)

8. Drawer Liners: Shadow box Lower

9. Drawer Liners: Shadow box Upper

10. Drawer Liners: Ribbed Vinyl Mat

B) SV - Small Version (22.5” Wide, 27.75” Deep): Quantity (4) with low-pro caster wheels & ESD top.

1. Housing 0155: Must nest under Powered-Riser Workstations (BL1756 with 2” caster kit = ~35.02”)

2. Low-pro caster wheels (Housing No Feet “HNF”)

3. Drawer Configurations: Housing 0155: 4 Drawers: 70, 40, 25, 20

4. ESD Top

5. ESD Cable

6. Hinge Lock Bar (Left side)

7. Cabinet Key Lock (Right side), with individual keys for each box (i.e., no master key)

8. Drawer Liners: Shadow box Lower

9. Drawer Liners: Shadow box Upper

10. Drawer Liners: Ribbed Vinyl Mat

C) SV - Small Version (22.5” Wide, 27.75” Deep): Quantity (2) with low-pro caster wheels & ESD top.

1. Housing 0175:

a. Top of box should be same height as work surface on Powered-Riser Workstations. (BL1756 with 2” casters & ESD top: 35.02” + 1.75” = ~36.77”H from floor to top of work surface). This tool box will be used as stand-alone work surface adjacent to 45” length Powered-Riser Workstations.

2. Low-pro casters wheels (Housing No Feet “HNF”)

3. Drawer Configurations: Housing 0175: 5 Drawers: 70, 40, 25, 20, 20

4. ESD Top

5. ESD Cable

6. Hinge Lock Bar (Left side)

7. Cabinet Key Lock (Right side), with individual keys for each box (i.e., no master key)

8. Drawer Liners: Shadow box Lower

9. Drawer Liners: Shadow box Upper

10. Drawer Liners: Ribbed Vinyl Mat

11. Hanging File Kit

12. Include other options I might have overlooked here based on our previous conversations.

D) ST - Standard (30.0” Wide, 27.75” Deep): Quantity (1) with low-pro caster wheels & ESD top.

1. Housing 0175: Top of box should be same height as work surface on Powered-Riser Workstations. (BL1756 with 2” casters & ESD top: 35.02” + 1.75” = ~36.77”H from floor to top of work surface). This tool box will be used as stand-alone work surface adjacent to 60” length Powered-Riser Workstations.

2. Low-pro casters wheels (Housing No Feet “HNF”)

3. Drawer Configurations: Housing 0175: 5 Drawers: 70, 40, 25, 20, 20

4. ESD Top

5. ESD Cable

6. Hinge Lock Bar (Left side)

7. Cabinet Key Lock (Right side), with individual keys for each box (i.e., no master key)

8. Drawer Liners: Shadow box Lower

9. Drawer Liners: Shadow box Upper

10. Drawer Liners: Ribbed Vinyl Mat

11. Hanging File Kit

Each ESD Mobile Tool Box shall have the following salient characteristics:

1. ESD work surfaces and ESD tops shall consist of the following:

a. ESD Static Dissipative with a bullnose front edge

b. Constructed from laminate over particle board

2. ESD Workstation shall meet the following ESD criteria:

a. Tested and certified at an open circuit voltage of 100 volts per the ESD Association.

b. Perform within the static dissipative range of 10^6 to 10^9 ohms.

i. The point (surface) to point (surface) resistance shall be greater than or equal to 1 x 106 W (1,000,000 ohms) and less than or equal to 1 x 10 9 W (1,000,000,000 ohms) when tested at 100 V DC.

ii. The point (surface) to ground point resistance shall be greater than or equal to 1 x 10 6 W (1,000,000 ohms) and less than or equal to 1 x 10 9 W (1,000,000,000 ohms) when tested at 100 V DC.

c. Compliance with the following US military guidelines: HDBK-263A, MIL-STD-1686A, MIL-HDBK-773, MIL-STD-W-87893A, T.O. 00-25-234 Section VII, AFMCI 21-XXX, MIL-STD-129.

3. Color of Workstations shall consist of the following:

a. Metal structural components of workstations shall be painted black.

b. Laminated work surfaces shall be non-painted white.