Questions_and_Answers_2.pdf
PDF 37 KB Posted
- Attached to
- Robotic Painter Amend 02 Federal contract opportunity
- Solicitation number
- F3QCCM8059A102
About this file
Questions and Answers #2
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Borne_Primers.pdf | ||
| 2460T560_THREADED-STEM_SWIVEL_CASTER.SLDPRT | — | |
| Part2.SLDPRT | — | |
| Assem3.SLDDRW | — | |
| Assem3.SLDASM | — | |
| PD_L8WC11_4-27-18.pdf | ||
| Part3.SLDPRT | — | |
| Questions_&_Answers_(Job_Walk).pdf | ||
| PD_L8WC11_4-9-18.pdf | ||
| CDRLs_A003-_COTS.pdf | ||
| CDRLs_A002-_Mishap.pdf | ||
| CDRLs_A006-_Acceptance_Test_Plan.pdf | ||
| CDRLs_A004-_Chart.pdf | ||
| Combined_Synopsis-Solicitation_-_Robotic_Painter.pdf | ||
| Commercial-Item-Determination-Checklist.doc | DOC document | |
| CDRLs_A005-_Training.pdf | ||
| CDRLs_A001-_Contractor's_SOP.pdf | ||
| CDRLs_A007-_Acceptance_Test_Plan.pdf |
Show all 18
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Questions and Answers #2
1. (a) Can you please provide the Technical/Product Data Sheet for the water borne primers? (b) Also, can you please confirm how the primer is currently being sprayed? (eg. manual air spray gun, HVLP gun, air mix, air assisted/airless etc.)
Answer: (a) Technical Data Sheets will be uploaded into FBO and labeled Borne Primers. (b) The type of spray gun currently used is a HVLP. This was not given in the PD. We are not requiring the same type of gun to be used. Revised PD dated 27 Apr 2018 will be uploaded in FBO to reflect changes in sections
Section 3.1.C.iii. Fluid Systems and Section 3.1.C.v. ‐ At a minimum the system shall be able accommodate all the coatings listed in Appendix C.
2. Is a model if the paint rack available for the requested simulation?
Answer: Documents are posted in FBO.
3. Does the attached Combined Synopsis‐Solicitation also need to be completed and filled out?
Answer: If there are fill‐ins in the RFQ, then those must be filled out with the exception of the WAWF clause (we will fill out). Contractors can submit the quotation on a company letterhead instead of in the
RFQ; however, be sure to look at all the attachments and price every CLIN. Fill out the CID checklist and submit with quotation.
File details come from the government source that posted it.