F010528208SPI.pdf
PDF 973 KB Posted
- Attached to
- Advanced Concept Ejection Seat (ACES) II Harness Release Cartridge and Drogue Gun Cartridge
- Solicitation number
- FA8213-25-R-3026
About this file
This document is a Special Packaging Instruction (SPI) for an Impulse Cartridge, with a Code ID of 98747 and SPI Number F01-052-8208. The six-page document provides detailed instructions for packaging, preserving, and shipping military impulse cartridges, including specific requirements for wooden packaging materials, international shipping standards, and packaging levels. Key requirements include heat-treating wooden packaging materials, using debarked wood, and following strict packaging protocols for different shipping and storage conditions, with special attention to Level A protection for war reserve materials, mobilization, and strategic deployments.
The document outlines precise packaging steps, such as placing up to 52 bagged items in each shipping container, using cushioning between items to prevent movement, and following specific overboxing and palletization procedures. The packaging instructions include detailed specifications for container dimensions, weight limits, and strapping, with a sample palletization procedure showing a load consisting of 40 boxes weighing 400 pounds, with a total pallet weight of 483.35 pounds. The document emphasizes the need for proper hazard classification and adherence to international phytosanitary measures for wood packaging materials.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA821325R3026 A5.pdf | ||
| FA821325R3026 A4.pdf | ||
| FA821325R3026 A3.pdf | ||
| FA821325R3026 A2.pdf | ||
| FA821325R3026 A1.pdf | ||
| REPSHIP.pdf | ||
| ADC_SOW.pdf | ||
| F010528206SPI.pdf | ||
| ES7034.pdf | ||
| EDL_Combined.pdf | ||
| AirSpec.pdf | ||
| PackagingSOW.pdf | ||
| Section_L_CADPAD.pdf | ||
| Section_M_CADPAD.pdf | ||
| F013193847SPI.pdf | ||
| Combined_Item_Descriptions.pdf | ||
| FA821325R3026.pdf | ||
| ItemMarkingInstruction.pdf | ||
| CDRL.pdf | ||
| Statement_of_Objectives_SOO.pdf |
Show all 20
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
CUI
NOTES
1. MAY PLACE UP TO 52 EACH BAGGED ITEMS IN EACH SHIPPING CONTAINER.
2. USE CUSHIONING REF.-1 BETWEEN AND AROUND EACH ITEM TO PREVENT MOVEMENT AND KEEP ITEMS FROM
TOUCHING SIDES OF CONTAINER.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: ASSETS PACKAGED IN ACCORDANCE WITH THE PREVIOUS EDITION OF THIS SPI DO NOT REQUIRE
REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 3: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 4: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTICE 5: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
File details come from the government source that posted it. Updated .