F010528206SPI.pdf
PDF 888 KB Posted
- Attached to
- Advanced Concept Ejection Seat (ACES) II Harness Release Cartridge and Drogue Gun Cartridge
- Solicitation number
- FA8213-25-R-3026
About this file
This Special Packaging Instruction (SPI) details packaging requirements for an Impulse Cartridge (NSN 1377-01-052-8206). The document provides comprehensive instructions for military preservation, packaging, and shipping of these cartridges, including specific packaging levels (A and B), marking requirements, and international wood packaging material standards. Key packaging specifications include using ASTM-specified materials, allowing up to 70 items per shipping container, and requiring heat-treated wooden packaging materials that comply with international phytosanitary measures. The document includes detailed packaging diagrams, closure instructions, and palletization procedures, with a fully loaded pallet containing 40 boxes weighing approximately 483.95 lbs and having a cube load of 48.4.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA821325R3026 A5.pdf | ||
| FA821325R3026 A4.pdf | ||
| FA821325R3026 A3.pdf | ||
| FA821325R3026 A2.pdf | ||
| FA821325R3026 A1.pdf | ||
| AirSpec.pdf | ||
| PackagingSOW.pdf | ||
| Section_L_CADPAD.pdf | ||
| Section_M_CADPAD.pdf | ||
| REPSHIP.pdf | ||
| ADC_SOW.pdf | ||
| ES7034.pdf | ||
| EDL_Combined.pdf | ||
| F013193847SPI.pdf | ||
| Combined_Item_Descriptions.pdf | ||
| FA821325R3026.pdf | ||
| ItemMarkingInstruction.pdf | ||
| F010528208SPI.pdf | ||
| CDRL.pdf | ||
| Statement_of_Objectives_SOO.pdf |
Show all 20
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
CUI
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
NOTICE 3: ASSETS PACKAGED IN ACCORDANCE WITH THE PREVIOUS EDITION OF THIS SPI DO NOT REQUIRE
REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 4: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 5: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTES
1. MAY PLACE UP TO 70 ITEMS IN SHIPPING CONTAINER.
2. WRAP WITH REF.-3, PLACE IN BAG REF.-2 REMOVE AIR AND SEAL. USE REF.-1 TO PREVENT ITEMS FROM TOUCHING SIDES OF
CONTAINER AND PREVENT MOVEMENT.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
File details come from the government source that posted it. Updated .