F-MEAS_PMT_246002.pdf
PDF 114 KB Posted
- Solicitation number
- ITB-24-019
- Issued by
- Pueblo County, Colorado
About this file
This document is a Measurement and Payment specification for the Board of Water Works, Pueblo, Colorado, for the Watts Tank Influent Piping Project (P.N. 246002), dated 03/25/2024. The document details eight specific bid items related to a 20-inch pipe replacement project, including installing 20" pipe, cleaning existing pipes and elbows, installing pipe cradles, performing tie-ins to existing cast iron pipe, installing mega-flanges and wafer assemblies, installing 90-degree bends, removing existing cast iron pipe and cradles, and painting existing cast iron pipes and elbows.
The measurement and payment specifications outline precise methods for calculating payment for each bid item, with measurements based on actual quantities installed, linear feet removed, or hours worked. Pueblo Water will supply many materials including pipes, flanges, valves, and roll-offs, while the contractor is responsible for providing supplementary materials like epoxy paint, concrete, and other construction necessities. The project involves demolishing approximately 400 linear feet of existing cast iron pipe and replacing it with new piping inside a 5.8 MG below-ground tank, with specific requirements for cleaning, installation, and finishing of the piping infrastructure.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Board of Water Works, Pueblo Colorado 1-F Watts Tank Influent Piping
P.N. 246002
03/25/2024
MEASUREMENT AND PAYMENT
F.0100-INSTALL 20” PIPE BID ITEM NOS. 1
Measurement:
The measurement of the length of each line or run of pipe will begin and end at:
a. The end of the pipe where connected to an existing pipe, fitting or valve; or at the end of a dead-end run.
b. The measurement of each line of pipe of each size which is to be paid for on a unit price basis will be continuous through and shall include the full laying lengths of all fittings and valves installed between the ends of each line; except that the laying lengths of reducers and increasers will be divided equally between the connected pipe sizes.
Payment:
The payment shall include picking-up and transporting all Pueblo Water furnished materials from Pueblo Water’s storage yard to the job site; installing all pipe; disinfecting lines in place; clean-up; and all other associated costs.
F.0200-CLEAN EXISTING PIPE AND ELBOWS BID ITEM NOS. 2
The measurement will be the actual number of hours needed to clean interior and exterior.
The payment for the preceding bid item shall include any means and methods to scour existing tuberculosis (interior 12” into pipe and full exterior) to the satisfaction of the
Engineer, ready exterior for paint application. Exterior surface to SPCC 10.
Board of Water Works, Pueblo Colorado 2-F
F.0300-INSTALL PIPE CRADLES BID ITEM NOS. 3
The measurement will be the actual number of cradles installed.
The payment shall include layout, forming, bonding, rebar placement, doweling, grouting, concrete placement, stripping forms, attaching aluminum banding, grout repair existing floor (from removal of existing cradles) All materials for cradles to be provided by
Contractor.
F.0400-“TIE-IN” TO EXISTING 20” C.I. PIPE BID ITEM NOS. 4
The measurement will be the actual number of “Tie-In” to the existing 20” C.I. pipe.
The payment shall include cutting of existing 20” pipe and installing 20” coupling (by
Pueblo Water).
F.0500-INSTALL 20” MEGA-FLANGE AND WAFER ASSEMBLY BID ITEM NOS. 5
The measurement will be the actual number of 20” Mega-Flanges and Wafer Valves installed.
The payment for the preceding bid item shall include all labor and incidentals to install
Pueblo Water supplied 20” Mega-Flange and Tideflex Wafer Valve.
Board of Water Works, Pueblo Colorado 3-F
F.0600-INSTALL EFFLUENT 20” 90 BEND AND WAFER VALVE BID ITEM NOS. 6
The measurement will be the actual number of 20” 90-degree bends and Wafer Valves installed.
The payment for the preceding bid item shall include all labor and incidentals to install
Pueblo Water supplied 20” 90-degree FLXFL bends and Tideflex Wafer Valves.
F.0700-REMOVE EXISTING C.I. PIPE AND CRADLES BID ITEM NOS. 7
The measurement shall be based upon the number of L.F. of existing cast iron pipe removed and associated pipe cradles.
The payment shall include demolition, include all hauling and disposing of concrete, rebar any leftover material; C.I. pipe will be retained by Pueblo Water to be scrapped. Pipe to be placed within crane reach into roll-offs (supplied by Pueblo Water) or on ground.
F.0800-PAINT 20” EXISTING C.I. PIPE AND ELBOWS BID ITEM NOS. 8
The measurement shall be based upon a lump sum for the total cost to paint exterior cast iron pipe and elbows.
The payment shall include all means and methods to coat the existing pipe and elbow exterior with 10 mils epoxy paint per manufacturers recommendation.
File details come from the government source that posted it. Updated .