A-Page 2_A .pdf

PDF 114 KB Posted

Attached to
PUEBLO WATER - 2024 WATTS TANK INFLUENT 20-INCH PIPE REPLACEMENT - PN #246002
Solicitation number
ITB-24-019
Issued by
Pueblo County, Colorado

About this file

This document is a proposal form from the Board of Water Works of Pueblo, Colorado for City Wide Main Renewals in 2024, specifically for the Watts Tank Influent Piping project (P.N. 246002 and P.N. 245104). The project involves the demolition and replacement of approximately 400 linear feet of 20" cast iron pipe inside a 5.8 MG below-ground tank. The bid includes eight line items covering tasks such as installing lock joint pipe, cleaning existing pipe and elbows, installing pipe cradles, tie-ins to existing pipes, installing mega-flange and wafer valve assemblies, installing effluent bends, removing existing pipe and cradles, and painting existing pipe and elbows.

The proposal provides a structured bid form for contractors to complete, with quantities specified for each task and spaces to enter unit prices and total amounts. A mobilization line item is included, capped at 4% of the base bid subtotal. Pueblo Water will provide specific materials including pipe, flanges, valves, bolts, nuts, and roll-offs for scrap iron, while the contractor is responsible for supplementary construction materials like epoxy paint, concrete touch-up supplies, grouting, and other necessary equipment. A mandatory pre-bid inspection will determine final details about pipe cradle installation and demolition requirements.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Board of Water Works, Pueblo, Colorado 2-A

Watts Tank Influent Piping P.N. 246002

03/25/2024

PROPOSAL OF THE BOARD OF WATER WORKS

OF PUEBLO, COLORADO

CITY WIDE MAIN RENEWALS – 2024

P.N. 245104

Name and Address of Contractor

BASE BID

Bid

Item

No. Description Quantity Unit Price

Amount

1 INSTALL 20” LOCK JOINT PIPE 400 L.F.

CLEAN EXISTING PIPE AND

ELBOWS 64 HRS.

3 INSTALL PIPE CRADLES 24 EA.

4 “TIE-IN” TO EXISTING 20” C.I. 2 EA.

INSTALL 20” MEGA-FLANGE AND

WAFER VALVE ASSEMBLY 2 EA.

INSTALL EFFLUENT 20” 90 BEND

AND WAFER VALVE 2 EA.

REMOVE EXISITNG C.I. PIPE AND

CRADLES 400 L.F.

PAINT 20” EXISTING C.I. ELBOWS

AND PIPE 1 L.S.

SUB-TOTAL: BASE BID

BID TOTALS

BASE BID

SUB-TOTAL:

MOBILIZATION (Not to Exceed 4% of Sub-Total Base Bid): $

TOTAL: BASE BID AND MOBILIZATION $

File details come from the government source that posted it. Updated .