Exhibit_C001_Test_Plan_Procedures_FULL_TEXT.pdf
PDF 30 KB Posted
- Solicitation number
- FA8212-24-R-0007
About this file
This document is a Data Item Description (DID) that establishes the test procedures, test equipment, and inspection criteria to be used by the contractor for first article qualification testing.
The DID requires the test plan to include the purpose of the test, applicable documents, a description of the units to be tested, step-by-step test procedures, definitions of required readings and test equipment, and inspection criteria defining the minimum performance requirements the unit under test must meet. The related federal contract opportunity is for the procurement of F-16 circuit card assemblies under a 5-year IDIQ contract with the Department of the Air Force Materiel Command Air Force Sustainment Center. The solicitation was recently amended to change the contract type to firm fixed price and extend the closing date to May 30, 2024.
View the file
Other files
Show all 20
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: First Article Qualification Test Plan and Procedures
Number: DI-NDTI-81307A Approval Date: 21 NOV 2006 AMSC Number: 7649 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/I522 Applicable Forms: N/A
Use/relationship:
To establish test procedures, test equipment, and the inspection criteria that will be used by the contractor for first article qualification.
This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
This DID supercedes DI-NDTI-81307.
Requirements:
1. Reference documents. None.
2. Format:
The plan shall be in the contractor’s format.
3. Content:
This test plan shall include the following:
a. Purpose of test.
b. Applicable documents.
c. Description of units to be tested.
d. Test description to include the following:
(1) Step-by-step procedures which are to be followed by the operator when performing each test.
(2) Define readings to be taken, settings to be used, and description of the test equipment, including commercial identification.
Source: https://assist.dla.mil -- Downloaded: 2024-04-26T17:05Z
Check the source to verify that this is the current version before use.
DI-NDTI-81307A
(3) Drawings, schematics, photographs, etc, of noncommercial fixtures and testers necessary for test evaluation.
e. Inspection criteria that defines the minimum performance requirements that the unit under test must meet in order to be considered acceptable to the Government. This shall include, as a minimum, worst case prime power input, worst case signal level and timing inputs, and signal level and timing outputs.
4. END OF DI-NDTI-81307A
Source: https://assist.dla.mil -- Downloaded: 2024-04-26T17:05Z
Check the source to verify that this is the current version before use.
| DATA ITEM DESCRIPTION |
| Requirements: |
File details come from the government source that posted it. Updated .