Exhibit_B.pdf

Exhibit B:

Palmetto Flag (FOSU 3624)

• Overall mount outer dimensions: 78 5/8” x 118 5/8” x 4 5/8”

• Mounted: ~ 1986-1989

• Encapsulated flag stitched across top edge to padded covered support

• ½” acrylic on face and on back; aluminum frame & support bars

• Displayed at a 75° angle

• Humidity control monitoring system added 1990 (1 dial hygrometer, 1 battery operated probe sensor)

• Also fitted with 2 hose fittings to accommodate future air exchange if necessary

• Current mounted weight: Greater than 375 lbs. (This is simply the weight of the acrylic components based on the fact that ½” thick acrylic weighs 2.88 lbs. per square foot and the Palmetto flag has 2 sheets of 6.5’ x 10’ acrylic.)

Storm Flag (FOSU 9)

• Overall mount outer dimensions: 119 ½” x 224 ¼” x 6 5/8”

• Mounted: ~ 1986-1989

• Encapsulated flag stitched across top edge to padded covered support

• ½” acrylic on face and on back; aluminum frame & support bars

• Displayed at a 75° angle

• Humidity control monitoring system added 1990 (1 dial hygrometer, 2 battery operated probe sensors measuring air space in front of and behind flag, 2 computer data logging sensors measuring air space in case and ambient conditions outside case)

• Also fitted with 3 hose fittings to accommodate the microclimate dehumidifier/air exchange when needed.

• Current mounted weight: Greater than 1095 lbs. (This is simply the weight of the acrylic components based on the fact that ½” thick acrylic weighs 2.88 lbs. per square foot and the Storm flag has 2 sheets of 10’ x 19’ acrylic.)

Storage Tubes the flags will be rolled on: (archival heavy-duty Perma/Dur from University Products)

• Palmetto Flag: 10’ x 6” dia.

• Storm Flag: 10’x 6” dia.