Exhibit B - Axon Fleet_Field Install Guide.pptx

PPTX presentation 9 MB Posted

Attached to
Upfit Vehicle - 2025 Ford F250 LU87
Solicitation number
12444526Q0017
Issued by

About this file

This is a field installation guide for Axon Fleet 3 vehicle camera systems, specifically providing technical instructions for proper equipment setup and validation during installation.

The guide outlines the configuration requirements for integrating CradlePoint cellular connectivity equipment with Axon Hub camera systems in fleet vehicles. Key installation components include validating light indicators (green and yellow flashing indicate proper internet connectivity), confirming cable connections for 2.4/5GHz WiFi connectivity, and verifying proper port assignments on the Axon Hub. Specific connection requirements are detailed: the WAN port on CradlePoint connects to the Axon Hub's WAN 1 port (bottom left), the LAN port connects to the vehicle dock, front camera connects to LAN 4 (bottom middle), rear camera connects to LAN 5 (bottom right), GPS/GNSS equipment, and dual WiFi inputs (5GHz bands). The guide includes visual wiring diagrams and validation checkpoints to ensure technicians verify cable accuracy, proper light status, and correct internet connectivity before completing field installation. This document serves as a technical reference for installers performing upfits on USDA Forest Service vehicles, specifically applicable to the 2025 Ford F250 LU87 vehicle platform referenced in the related solicitation.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Axon Fleet 3 LEI Field Install Guide Rev. 2.20.2025

CradlePoint

Validate the lights are accurate as shown below.

May have some flashing of such.

SGNL maybe reduced dependent on signal capability Other colors maybe other issues Main port and AUX cords say cell

CradlePoint Validate cables are as shown below Lights flashing green and/or yellow with Internet Cords?

2.4/5Ghz – white outside cables-states WIFI LAN port- left side of two plugs- goes to vehicle dock WAN port- right side of two plugs- goes to Axon Hub

AXON HUB

Are the wires in the appropriate slots?

Are you getting green/yellow with Internet cords?

WAN 1– (bottom left) goes to WAN on CradlePoint LAN 4 – (bottom middle) goes to Front Camera LAN 5 – ( bottom right) goes to Rear Camera GNSS – Cord label says GPS 5GHZ – Cord label says Wifi 1 for top and Wifi 2 for bottom

Wiring Diagram

Wiring Input image1.png image2.png image3.png image4.png image5.png

File details come from the government source that posted it. Updated .