Exhibit A CLIN 0001.pdf
PDF 108 KB Posted
- Attached to
- Socket Head Cap Screws
- Solicitation number
- SPMYM326Q9001
About this file
This is a Contract Data Requirements List specifying two data items required for a capscrew contract line item (0001). The contract is administered by Code 245, and both data items must be submitted with material delivery under separate shipment numbers.
Data Item A001 requires a Certificate of Compliance certifying quality compliance, with authority derived from DI-MISC-81356A and referenced in Contract Section C.2. This is a one-time submission due with material delivery, requiring one final copy for distribution to addressee 133.2. Data Item A002 requires Certification Data/Report documenting chemical and mechanical certification, with authority from DI-MISC-80678 and referenced in Contract Section C.3. This is also a one-time submission due with material delivery, requiring one final copy for the same distribution address. The A002 certification must contain actual quantitative test results in specification-required units for all chemical and mechanical tests, with specific requirements that paragraphs 10.2.2, 10.2.3, and 10.4 of DI-MISC-80678 do not apply. For fasteners specifically, certification must show evidence of testing the correct number of specimens using new untested fasteners for wedge tensile and yield strength testing. Additionally, marking and certification requirements for controlled industrial material apply. Payment and submission procedures are governed by FAR Clauses 252.232-7006, 252.232-7003, or 52.232-36.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Exhibit B CLIN 0002.pdf | ||
| Contract Criteria Attachment 1 CLIN 0001.pdf | ||
| RFQ SPMYM32626Q9001.pdf | ||
| Contract Criteria Attachment 2 CLIN 0002.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP TM ______ OTHER______
D. SYSTEM/ITEM
CAPSCREW
E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY 245.2
X
J. DATE
File details come from the government source that posted it. Updated .