Contract Criteria Attachment 2 CLIN 0002.pdf

This is a federal contract specification document (FSC 5305, Attachment 2, Section "B") for a Socket Head Capscrew item.

The contract specifies a single line item (Stock Number 5305-LL-D00-0231) for Socket Head Capscrews meeting FF-S-86 specifications. The detailed technical requirements in Section C.1 define the product as FF-S-86 Type VI capscrews, 0.375-16UNC-3A by 1.750 inches in length, manufactured from nickel material (QQ-N-286G), annealed and age hardened. The head must be drilled for lockwire per FF-S-86 Table 1 specifications. Section C includes critical notes regarding material treatment: earlier revisions of FF-S-86 are acceptable provided NICUAL material certification shows proper heat treatment protocols; threads formed after final age hardening must be cut or ground only. Two compliance exhibits are required (Certificate of Compliance DI-MISC-81356A and Certification/Data Report DI-MISC-80678). Section C.4 applies PNS Standard Clauses including mercury exclusion (C500), marking and certification requirements (C524), and restrictions on K-Monel material (C531). Additional requirements include standard commercial packaging (Section D.2), contractor inspection requirements and destination acceptance procedures (Section E), non-level-1 materials (Section G), and special provisions for threaded products (Section H500).