Exh 6.3_Plan Sheet RD820.pdf
PDF 153 KB Posted
- Attached to
- ESB I5 Albany ROW Fencing
- Solicitation number
- S-73000-00018261
- Issued by
- Oregon
About this file
This file is a technical plan sheet (RD820) from Oregon Standard Drawings used by the Oregon Department of Transportation (ODOT) for fence gate specifications. The document provides detailed engineering specifications and dimensional requirements for both single and double gate installations designed for use with specific fence types (Types 1, 1-5W, and 2). The plan sheet, effective as of the date shown and revised through July 20, 2020, establishes material requirements including Schedule 40 galvanized steel pipe for frames and braces, woven wire fabric or chain link fabric options, and truss rod specifications. Gate opening dimensions range from a maximum of 20 feet for single gates to 40 feet for double gates. The specifications include detailed tables indicating rod numbers, nominal diameters, minimum weights, and brace configurations, with all materials required to comply with current Oregon Standard Specifications and designs prepared in accordance with generally accepted engineering principles under the responsibility of a Registered Professional Engineer.
The technical specifications mandate that gate posts on each side of a gate opening be uniform in size, with maximum taper of one inch in four feet, and reference additional details from Standard Drawing RD810 for end posts, setting, and bracing. The document is associated with the ESB I5 Albany ROW Fencing project, an Oregon state and local contract opportunity requiring an Emerging Small Business certification to submit a bid. This certification requirement represents a set-aside for emerging small businesses in Oregon, positioning the project as restricted to contractors holding this specific qualification for the right-of-way fencing removal, replacement, installation, and new access gate installation work.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Exh 6.2_Plan Sheet RD810.pdf | ||
| Exh 5_Specifications~1.docx | DOCX document | |
| Att A Form A-2_Bid Pricing Form.xlsx | XLSX spreadsheet | |
| 00018261_RFCQ.docx | DOCX document | |
| Exh 6.1_D4 I5 Albany Refencing location.kml | KML file | |
| 00018261_Att B_Sample Contract.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RD820
FENCE GATES
R D
.d g n
13-JAN-2020N/A
J U
L
RODS
NUMBERDOUBLE GATESINGLE GATE
Min. Avg.(in)
NOM. DIA.
(in)
NOM. DIA.
DIA. OF SMALL END (in)
(in)
NOM. SIZE
(in)
NOM. DIA.
(lb/ft)
MIN. WT.
(lb/ft)
MIN. WT.
(lb/ft)
MIN. WT.
Max.Min.
17 thru 20
12 thru 16
7 thru 11
UP thru 6
33 thru 40
23 thru 32
13 thru 22
UP thru 12
3.65
2.72
2.27
1.68
2.27
2.27
1.68
10x10
8x8
6x6
6x6
18.97
18.97
9.11
5.79
1 2
Brace(s) to be equally spaced when required (See Table)
Schedule 40 galv. steel pipe brace (Typ.)
(See Table) steel pipe frame
Schedule 40 galv.
two are required)
Truss rod (Where
(See Table)
Gate post
(See Table)
" dia.8
Truss rod, or chain link fabric
Woven wire fabric
(See Table)
Gate post
Finish grade
Gate opening (as shown on plans)
20' single gate
Max. opening 40' double gate
For length, setting and bracing details see end posts, Std. Dwg. RD810.
to be as indicated for single gate installation of the wider gate width.
At a double gate installation with unequal width gates, size of both posts
Gate posts on each side of a gate opening to be the same size.
Max. taper 1" in 4'
4. Add fence grounding as required.
3. See project plans for details not shown.
2. See Std. Dwg. RD810 for details not shown.
1. Gates shown are for use with Fence Types 1, 1-5W and 2.
GENERAL NOTES FOR ALL DETAILS ON THIS SHEET:
GATE POSTS
GATE COMPONENTS
WOOD STEEL
STEEL PIPE BRACE
SCHEDULE 40 GALV.
STEEL PIPE FRAME
SCHEDULE 40 GALV.
(ft)
GATE OPENING ROUND SQUARE
STEEL PIPE
SCHEDULE 40 GALV.
TRUSS
the current Oregon Standard Specifications.
All materials shall be in accordance with
DATE REVISION DESCRIPTION
OREGON STANDARD DRAWINGS
DATE
SDR
BOOK NO.
CALC.
Effective Date: December 1, 2026 - May 31, 2027
Professional Engineer.
first consulting a Registered and should not be used without sole responsibility of the user principles and practices, is the generally accepted engineering designed in accordance with
Standard Drawing, while
The selection and use of this
File details come from the government source that posted it. Updated .