Exh 6.2_Plan Sheet RD810.pdf
PDF 296 KB Posted
- Attached to
- ESB I5 Albany ROW Fencing
- Solicitation number
- S-73000-00018261
- Issued by
- Oregon
About this file
This is a technical plan sheet (RD810) for barbed and woven wire fencing standards issued by the Oregon Department of Transportation, establishing specifications for right-of-way fencing installation and removal projects in Oregon. The document, effective December 1, 2026, through May 31, 2027, provides detailed engineering specifications and construction standards for multiple fence types, including Type 1, Type 1-5W, and Type 2 configurations with varying wire gauges, post materials, spacing requirements, and bracing details. The plan sheet includes comprehensive tables specifying dimensions, materials, post specifications (both wood and metal), concrete footing requirements, and gateway unit configurations for corner, end, and gate posts. Construction details outline requirements for barbed wire fencing with four to five wire configurations, woven wire fabric specifications, ground line wire installations, and bracing systems using either wooden stays or metal components depending on environmental conditions such as heavy snowfall or snow drifts exceeding 36 inches.
The specifications mandate compliance with ASTM standards and AASHTO materials standards, with all concrete required to be commercial grade and installations executed by registered professional engineers. The document references additional standard drawings including RD820 for fence gates and requires project-specific plan review for details not shown on this sheet. Fence radius requirements vary based on configuration type, with Type 1 and 1-5W fences requiring specific brace unit installations (Unit A or both Units A and B) depending on fence radius measurements of 20 feet or less, 20 to 330 feet, or over 330 feet. This plan sheet serves as the technical foundation for the ESB I5 Albany Right-of-Way Fencing project, which requires qualified contractors certified as Emerging Small Businesses in Oregon to perform removal, replacement, and new fencing installation work.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Exh 6.3_Plan Sheet RD820.pdf | ||
| Exh 5_Specifications~1.docx | DOCX document | |
| Att A Form A-2_Bid Pricing Form.xlsx | XLSX spreadsheet | |
| 00018261_RFCQ.docx | DOCX document | |
| Exh 6.1_D4 I5 Albany Refencing location.kml | KML file | |
| 00018261_Att B_Sample Contract.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RD810
FENCES
BARBED AND WOVEN WIRE
R D
.d g n
13-JAN-2020N/A
J U
L xxxxxxxxxxxx x x x x x xxxxx x x x x x xxxxxx x x xxx x xx x xx x x x x x x x x x x x x xxxxx x x x x x x x x x x x xxxxxxx x x x x x x x xxx xx x x x xx x xxx xxxxx x x x x x x x x x x x x x xxx x x x xx x x x x x x xx xx x x x x x x xx x x x x x x xx
B
C
WIRES
NO. OF
10"
14"
10"
12"
Type 1-5W
Type 1
1 1
SQUARE
SHAPE
a a a a b b
FENCE C SPACING
stake
1"x2"x12"
Lever metal posts)
(See wood or
Gate post from end of locking bar.
post and approx. 5" welded or bolted to gate
" short link coil chain4 line post material)
4'-4" (Metal
End bar Length
3" normal
Gate post
6 gauge thkn. wire loop wood line post material)
Length 4'-4" (Metal or
End bar
6 gauge thkn. wire loop
3" normal m in m in
Ground linewire loop
6 gauge thkn.
line post material) approx.2'-2" (Metal
Locking bar
Fence stays gauge wire2
6 gauge thkn. wire loop
30" (Type 2)
(33' max. for type 2 fence material)
Width as indicated on plan
5'-6" max. 5'-6" max. 5'-6" max.
3 For wooden stays, see Type 1 fence details.
2 For details not shown see fence type.
1 Match adjointing fence type.
Fence material Fence material Fence materialNOTES:
thkn. wire gauge2
Fence stays
4 or 5 barbed wires
2" min.
Ground line
Post
NOTE:
1 5'-6" 5'-6" ta b le b e lo w
F o r s p a c in g s e e for woven wire fabric.
Horizontal wires to be stapled are: single wires and a minimum of 4 wires on the ground.
Hemlock or Western Pine, spaced as shown for wire stays and to rest firmly
Stays to be 2"x2"x52" min. length, sound, untreated Douglas Fir, Western
Wooden Stays to be used in areas of heavy snowfall or snow drifts over 36".
wire fabric
Rectangular woven
832-6-12
Design number details see Type 1 fence
For wooden stays, NOTE:
Recommendation R9-47.
Simplified Practice
U.S. Dept. of Commerce
Post2
"Barbed wire
Ground line
Unit A required at gate post.
fence line at intersection with new fence line.
Either Unit A or Units A & B are required in existing
Over 330
20-330
20 or Less
Types
1-5W &
1, A & B
A
None
FENCE
R
(ft) REQUIRED
UNITS
TABLE 1 (For wood posts)
TABLE 2
TABLE 3
3" to 4"
All Types 660' 16'-6" 7'-6" 6'-6" 4'-4" 3'-2" 2'-2" 7'-8" 9"-22"
ASTM A-7021.33 lb or U-bar
Tee Channel 3"x3"3"Line Post
Brace Rail
Brace or
"2 to 5
"2
Other Post 4" to 7" 5"
4"
5"x5"
4"x4" Tubular
Angle
Tubular
Angle
3.19 lb b
4.1 lb "4
"x2
"x22
" O.D.8
"4
2"x2"x
" +/- O.D.2 min.-max. min. avg.
FENCE
max.
R P min.
L min.
L H min.
D min.
D min.
B min.-max.
X
MEMBER
SMALL END (in)
DIAMETER OF
ROUND
(in) nominal
SIZE
nominal
PER (ft)
WEIGHT
nominal
SIZE
WOOD METAL
Max. taper 1":48".
in each dimension.
Max. allowable size 1" additional
In accordance with ASTM A 702.
In accordance with AASHTO M 181.
corner post unit
End, gate or m in
12"
Brace min.
Concrete footing min.
nom. wt. 0.67 lbs
Anchor plate footing
Concrete
Brace
Line post
Intermediate end post line
Ground
Brace min.
18" min.
min.
2"
D H
L
X
B
P
R
B
X
H
L
D
12"
H D
L
22" round
20" sq. or
22" round
18" sq. or
22" round
20" sq. or
22" round
18" sq. or
2"
2"
8'-3"8'-3"
Wood brace rail steel dowel
"dia. x4"8
Wood post
Brace post thkn. wire
4 stands of 9 gauge
Brace guys Brace post
Brace rail Intermediate end post
3. For cross sectional dimensions of members see Table 3.
2. Line post spacing same as dimension P.
1. For dimensions indicated by letter see Table 2.
NOTES:
1"x2"x12" stake
Lever
8'-3" 8'-3"
R
P
H
L
D
D
L
H
Brace post
D
L
H
UNIT A UNIT B
For units required see Table 1 corner post unit(s)
End, gate or
Brace rail wire
9 gauge thkn.
4 strands of
Brace guy guy at gate posts
Additional brace line
Ground
Line post
21 21 21
GATEWAY
TYPES 1 , & 1-5W
BRACE RAIL CONNECTIONMETAL POSTS
WOOD POSTS
TYPE 2
TYPE 2TYPE 1-5WTYPE 1
7. Add fence grounding as required.
6. See project plans for details not shown.
5. See Std. Dwg. RD820 for fence gates.
4. All concrete shall be commercial grade concrete.
3. For shapes, weights and dimensions of members see Table 3.
2. Line post spacing same as dimension P.
1. For dimensions indicated by letter see Table 2.
GENERAL NOTES FOR ALL DETAILS ON THIS SHEET:
TABLE OF DIMENSIONS
the current Oregon Standard Specifications.
All materials shall be in accordance with
DATE REVISION DESCRIPTION
OREGON STANDARD DRAWINGS
DATE
SDR
BOOK NO.
CALC.
Effective Date: December 1, 2026 - May 31, 2027
Professional Engineer.
first consulting a Registered and should not be used without sole responsibility of the user principles and practices, is the generally accepted engineering designed in accordance with
Standard Drawing, while
The selection and use of this
File details come from the government source that posted it. Updated .