Request for Proposal

Request for Proposal ("RFP") Number:

RFP Name:

RESPONSES MUST BE RECEIVED BEFORE:

2:00 PM Central, 2/20/2026 s must be submitted in TechBid at the following address:

https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=TexasTech

2026-1172

Welding Services https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=TexasTech

RFP for Welding Services

Rev. August 8, 2024 Page 2 of 20

TABLE OF CONTENTS

SECTION 1: SCOPE OF WORK

1.1 Objectives

1.2 Project Details

1.3 Alternate Proposals

SECTION 2: PROPOSAL REQUIREMENT

2.1 Mandatory Requirements/Conditions

2.2 Preferred Qualifications

2.3 Quality Measures/Future State

2.4 Proposal Submittal Requirements

SECTION 3: EVALUATION PROCEDURES

3.1 Evaluation Process

3.2 Proposer's Acceptance of Evaluation Methodology

3.3 Evaluation Method

3.4 Evaluation Criteria and Weights

3.5 Scoring Methodology

3.6 Consideration of Additional Information

3.7 Oral Presentations and Interviews

3.8 Award Process

3.9 Best and Final Offer

3.10 Protest Procedures

3.11 Contract Documents

3.12 Not Exclusive

SECTION 4: ADMINISTRATIVE REQUIREMENTS

4.1 Primary Contact

4.2 Event Information

4.3 References

4.4 Licenses

4.5 Term of Award

4.6 Veteran Heroes United in Business ("VetHUB") FirmsHUB Subcontracting Plan

4.7 Right to Modify, Rescind, or Revoke the RFP

4.8 Right to Review and Award

4.9 Signature and Certification of Proposer

4.10 Compliance with Applicable Laws, Regulations, Ordinances, TTU System Regents' Rules, and TTU Operating Policies and Procedures

4.11 Compliance with RFP Requirements

4.12 Binding Effect of Proposal

4.13 Use and Disclosure of Information

4.14 Group Purchase Authority

4.15 E-commerce

4.16 Withdrawal or Modification

4.17 Risk of Loss, Damage, or Delay

4.18 Digital Signature

4.19 Proposer Registration

4.20 Insurance Requirements

4.21 Compensation and Fees

4.22 Invoicing and Payment

APPENDIX A: DEFINITIONS

Rev. August 8, 2024 Page 3 of 20

SECTION 1:

SCOPE OF WORK

1.1 Objectives

Texas Tech University (“TTU”) is seeking cost-effective Proposals to support the sustainability of a large-scale research institute through a Request for Proposal (“RFP”) for Welding Services (“Services”). Proposer(s) should propose a pricing model for Services that equals or exceeds the quality level of industry standards and complies with applicable federal, State, and local laws and regulations, as well as TTU specifications . TTU is seeking related Services for various to-be-determined projects on the TTU campus and other satellite or off-site locations on an as-needed basis. The purpose of this RFP is to obtain mutually beneficial relationships with one or more Proposers that bring value to TTU while ensuring prompt and professional responses to TTU’s Service needs. If awarded a contract under this RFP, TTU will execute a master agreement that will contain the necessary legal terms to govern the business relationship throughout the term.

1.2 Project Details

TTU currently maintains various owned and leased facilities and infrastructure (collectively referred to herein as “Facilities”), both on and off the main TTU campus in Lubbock, Texas. The Proposer(s) may be requested to provide Services to any one or all locations considered under this RFP, and TTU may add or remove any Facilities from being covered under this RFP during the term of any resulting agreement(s). Proposer(s) must coordinate Services with TTU Operations, unless TTU Operations approves a project to be managed by an individual department, and provides a pricing schedule or quote, including a breakdown of the cost of labor and material. Labor and material shall be detailed and provided on individual quotes for requested projects, and any resulting master contract from this RFP shall be referenced on each quote. Unless otherwise arranged, Services will take place during normal business hours unless approved in advance by TTU in writing. Normal business hours are defined as Monday through Friday from 8:00 a.m. until 5:00 p.m. Projects can range from small maintenance and repair to larger-scale welding projects. Some larger Projects may require approval from TTU Operations. TTU is seeking discounted and/or competitively priced Proposals for Services to be utilized for the duration of the Agreement term.

Projects will be formally submitted to the awarded Proposer(s) by the issuance of a Purchase Order, and no Services other than those detailed on a Purchase Order shall be authorized.

The scope of work depends on the Proposer(s) capabilities. Not every Proposer will be able to provide the full scope of the Project, and TTU may engage several awarded Proposers to complete any Project. Services, for this RFP, are defined as any individual or combination of trade-specific labor and material provided with expertise and industry knowledge by the Proposer(s). Welding trades that depend on specific requirements will be held to the standards of those requirements, regulations, and/or certifications. For example, welding on pressure vessels in Texas is a highly regulated process, requiring certified personnel, documented procedures, and regulatory oversight (Texas Department of Licensing and Regulation & Authorized Inspectors) to ensure safety, relying heavily on American Society of Mechanical Engineers (ASME) National Board standards. These Services can include, but are not limited to:

1.2.1 Animal Pins

1.2.2 Fencing

1.2.3 Building Repair

1.2.4 Metal Fabrication

1.2.5 Furniture Repair

1.2.6 Sculpture and Outdoor Artwork Repair

1.2.7 Structure Repair and Build

1.2.8 Boiler Welding w/a State Stamp

1.2.9 Steam Pipe Welding

Services that are being requested include, but are not limited to:

1.2.10 Shielded Metal Arc Welding

1.2.11 Gas Metal Arc Welding

1.2.12 Gas Tungsten Arc Welding

1.2.13 Flux Cored Arc Welding

1.2.14 Submerged Arc Welding

Rev. August 8, 2024 Page 4 of 20

1.3 Alternate Proposals

TTU may consider alternate Proposals submitted by Proposer that expand or differ from these specifications.

Proposers submitting alternate Proposals should (i) clearly identify any exceptions taken to the Specifications set forth in this RFP and (ii) include a detailed description of the alternative(s) proposed. The Proposer may suggest additions to the specifications set forth in this RFP, and all such suggestions must be clearly defined. Alternate Proposals should be submitted as attachments to the Proposal. Alternate Proposals shall meet the same mandatory requirements and shall be in the same format as the Proposal’s base format.

Rev. August 8, 2024 Page 5 of 20

SECTION 2

PROPOSAL REQUIREMENTS

2.1 Mandatory Requirements/Conditions

2.1.1 General Requirements

i. Proposer(s) must accept Purchase Orders (“PO”)

(a) POs will be submitted via CXML, email, or fax as determined by the Proposer’s selection during the vendor setup process. CXML integration with Jaggaer is an option and provides the Proposer an opportunity to reach a broader market of the TTU campus.

(b) No Services or issuance of Services shall commence at any time unless a valid TTU PO has been received by the Proposer.

(c) TTU is not liable to pay any expenses that are not associated with a TTU PO.

(d) PO purchases are subject to applicable policies and regulations. OP 72.11 (PO)

ii. Proposer(s) shall ensure that all its employees comply with all Occupational Safety and Health

Administration (“OSHA”), state, and city safety and occupational health standards, and other applicable federal, state, and local health, safety, and environmental laws, ordinances, rules, and regulations in the performance of the Services.

iii. Proposer(s) shall have all employees wear appropriate personal protective equipment at all times.

iv. Proposer(s) shall block off and/or mark all work areas with appropriate safety signs and barricades to protect the public from incidents or injury.

v. Proposer(s) shall provide a minimum of two (2) years warranty on completed Services, excluding damage or deterioration caused by normal wear and tear, weather exposure, or misuse by third parties.

vi. Criminal background checks are required at the Proposer(s)’s expense for employees/technicians performing Services on the TTU campus.

vii. Proposer(s) must provide identification for all employees providing Services on TTU property. No employee of the Proposer(s) will be allowed on TTU properties without proper identification. All employees must comply with the notification requirements in the General Terms and Conditions.

viii. Proposer(s) shall have all necessary certifications/licenses in compliance with any existing local, state, or federal regulations.

ix. Proposer(s) shall provide a customer support email address and phone number for the local supervisory representative as well as the regional and state/national representative.

2.1.2 Specialty Requirements (Specialty Requirements are only applicable for Services requiring additional regulation and/or certification. Not all Projects or Proposers are required to adhere to these regulations/certifications.)

i. All projects must adhere to the current applicable ASME standards.

ii. Each welder must pass a test according to ASME Code standards and possess a valid authorization card for projects involving boilers, water heaters, and pressure vessels.

iii. Repairs and alterations must be performed by an organization holding a National Board R-Stamp, signifying certification for projects involving boilers, water heaters, and pressure vessels.

https://www.depts.ttu.edu/opmanual/op72.11.php

Rev. August 8, 2024 Page 6 of 20

iv. Authorized Repair Organizations: Companies with an R-Stamp and TDLR Certificate of Authorization for projects involving boilers, water heaters, and pressure vessels.

2.2 Preferred Qualifications

2.2.1 Proposer(s) has a minimum of three (3) years of experience in welding Services.

2.2.2 Commitment to additional personnel as needed for any Service or project that has been requested by TTU.

2.3 Quality Measures/Future State

2.3.1 All Services shall have the quality in accordance with industry and TTU standards.

2.3.2 TTU will be the sole judge concerning the merits or materials and/or Service(s) provided in accordance with the specification set forth in this document, or if it is determined that the Proposer is operating in violation of federal, state, and local applicable laws and ordinances.

2.3.3 Detailed drawings and designs shall be available upon request of TTU.

2.3.4 Proposer response time shall be adequate for each request from TTU. Completion time shall match project proposals. If any deviation from the quoted timeline exists, Proposer(s) shall notify the appropriate TTU department promptly.

2.3.5 Proposer(s) shall respond to warranty-covered repairs within seventy-two (72) hours and shall complete the applicable repair(s) in a timely manner set forth by TTU.

2.4 Proposal Submittal Requirements

2.4.1 By submitting a Proposal, the Proposer certifies an understanding of this RFP and has full knowledge of the scope, nature, quality, and quantity of the work to be performed, the detailed requirements of the Goods or Services to be provided, and the conditions under which the Goods or Services are to be performed. The Proposer also understands that all costs relating to preparing and responding to this RFP will be the sole responsibility of the Proposer. If selected for award by TTU, the Proposer will notify TTU immediately of any material change in any matters about which the Proposer has made a statement or representation or provided information.

Proposers are cautioned to read the information contained in this RFP carefully and to submit a complete Proposal to all requirements and questions as directed.

2.4.2 Submittal Instructions for TechBid Proposals

TTU requires that all Proposals be submitted in the TechBid system at (https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=TexasTech).

Proposers must submit Proposals online no later than the date and time indicated in the Schedule of Events.

TTU recommends that the Proposer submit the Proposal at least twenty-four (24) hours before the deadline for submission to accommodate any technical issues. If the Proposer encounters ANY issues with submitting a Response, the Proposer must contact the Primary Contact before the deadline.

In order to be considered responsive, the following items must be submitted in TechBid

i. Proposer’s Response Form

ii. Attachment A – Schedule of Cost and Fees

iii. HUB Subcontracting Commitment Letter (Example Attachment B)

iv. Signed Affirmation and Conflict of Interest https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=TexasTech

Rev. August 8, 2024 Page 7 of 20

SECTION 3

EVALUATION PROCEDURES

3.1 Evaluation Process

TTU will utilize a Contract Review Team (“CRT”) for the evaluation of this RFP. The Contract will be awarded based on the Proposal judged to be in the best interest of TTU, and the judgment in this regard shall be considered final.

Any Contract resulting from this Solicitation shall be awarded to the Proposer providing the Best Value to TTU.

Under §51.9335 of the Texas Education Code in determining what is the Best Value, TTU may consider:

3.1.1 The purchase price;

3.1.2 The reputation of the Contractor and of the Contractor’s Goods or Services;

3.1.3 The quality of the Contractor’s Goods or Services;

3.1.4 The extent to which the Goods or Services meet the TTU’s needs;

3.1.5 The Contractor’s past relationship with TTU;

3.1.6 The impact on the ability of TTU to comply with laws and rules relating to Historically Underutilized

Businesses and to the Procurement of Goods or Services from Persons with disabilities;

3.1.7 The total long-term cost to the institution of acquiring the Contractor’s Goods or Services;

3.1.8 Any other relevant factor that a private business entity would consider in selecting a Contractor; and

3.1.9 The use of material in construction or repair to real property that is not proprietary to a single vendor unless

TTU provides written justification in the request for bids for use of the unique material specified.

3.2 Proposer’s Acceptance of Evaluation Methodology

Submission of a Proposal indicates Proposer’s acceptance of the evaluation method and Proposer’s recognition that subjective judgments must be made by TTU and the evaluation team during the awarding of evaluation criteria points.

Evaluations will be made based upon the submitted Proposal,

3.3 Evaluation Method

A committee of TTU officials appointed by the Primary Contact will evaluate the Proposals and make a recommendation to the Assistant Vice President and Chief Procurement Officer. The evaluation will be based on the information provided in the Proposal, additional information requested by TTU for clarification, information obtained from references and independent sources, past performance of the Proposer (if applicable), the best and final offer, and oral presentations (if requested).

The evaluation of responsive Proposals shall then be completed by an evaluation team, which will determine the ranking of Proposals based on the evaluation criteria. Proposals will be evaluated strictly in accordance with the requirements set forth in this Solicitation, including any addenda or interpretations that are issued. TTU may also negotiate additional Goods and/or Services during the negotiation process if deemed in TTU’s best interest. TTU will award the Contract(s) to the responsible and responsive Proposer(s) whose Proposal is determined to be the most advantageous to TTU, considering the evaluation factors outlined in this RFP.

The evaluation of Proposals will include consideration of responses to the list of criteria in Section 3.4. Proposers must specifically address all criteria in their response. Any deviations or exceptions to the specifications or requirements must be described and justified in a transmittal letter. Failure to list such exceptions or deviations in the transmittal letter may be considered sufficient reason to reject the Proposal.

TTU will evaluate Proposals as submitted and will not notify Proposers of deficiencies in their responses. The awards will not be notified until a fully executed Contract(s) is complete.

Proposals must contain responses to each of the criteria, listed in the Evaluation Criteria below if the Proposer’s response cannot satisfy those criteria. A Proposal may be rejected if it is conditional or incomplete in the judgment of

TTU.

Rev. August 8, 2024 Page 8 of 20

3.4 Evaluation Criteria and Weights

Each Proposal shall be evaluated on the ability to meet TTU’s requirements and provide the Best Value to TTU. The Proposal shall be awarded points based on each of the following evaluation criteria.

The evaluation will be based on the following:

Evaluation Criteria Points Allowed

Criteria 1: Financial Value - Financial costs and/or benefits to the University

• Cost of goods and/or services

• Cost of ongoing maintenance, service agreements, licenses, or support

• Warranties

• Shipping/delivery/import costs

• Installation costs and/or implementation fees

• Donated goods and services

• Other financial consideration

45%

Criteria 2: Demonstrated ability of the Proposer to fulfill the TTUS’ requirements in accordance with the specifications

• Proposer’s demonstrated professional experience

• Experience with institutions of higher education or similar-sized organizations

• Administrative support and service

• Reporting capabilities

• Project Schedules/estimated time to perform Services or installation time

• Quality, availability, and adaptability of Proposer’s supplies, materials, and equipment

• Proposer’s staff capabilities and qualifications

• Stability and success of the Proposer’s business, including but not limited to:

o Past performance on similar projects (based on references and publicly available information) o Length of time the business has been operational o Demonstrated capability and financial resources to perform the services or provide the goods in the time projected o Pending or past legal proceedings

35%

Criteria 3: Value Added Options

• Ability to provide innovative ideas/resources for TTU process improvement

• Minimization of TTU resource use

10%

Criteria 4: Quality assurance plan and control measures implemented and maintained by the Contractor

• Methodology for performing Services and project planning

• Customer Service Program

• Ability to comply with Texas laws

10%

TOTAL 100%

3.5 Scoring Methodology

Each CRT Voting Member will evaluate the Proposal utilizing the Evaluation Criteria identified in Section 3.3 and will assign each criterion a subjective score of 0 -10, with 10 being the highest. This score is multiplied against the

Rev. August 8, 2024 Page 9 of 20 criterion’s weight which will produce a weighted value for the item. The weighted values for all criteria will be summed and then ranked to determine a high to low Proposer ranking. The ranking may be used in determining an initial pool of Proposers that will be invited for presentations or may be used in a final award determination for one or more Proposers.

3.6 Consideration of Additional Information

Consideration may also be given to any additional written information and comments that may serve to clarify the Proposal information to TTU.

3.7 Oral Presentations and Interviews

Upon completion of the initial review and evaluation of the Proposals submitted, selected Proposers may be invited to participate in oral presentations. Oral presentations and interviews are an option of the Contract Review Team and may or may not be conducted; therefore, Proposals must be complete when submitted.

3.8 Award Process

During the Proposal Opening, Proposals will be acknowledged publicly to identify the names of the Proposers but will be afforded security sufficient to preclude disclosure of the contents of the Proposal, including prices or other information, prior to award. After the Proposal Opening, an Award may be made on the basis of the Proposals initially submitted, without discussion, clarification, or modification, or on the basis of Negotiation with any of the Proposers or, at TTU’s sole option and discretion, TTU may discuss or negotiate all elements of the Proposal with selected Proposers representing a competitive range. For Negotiation purposes, a competitive range of acceptable Proposals may be established, comprising the highest-rated Proposals based on the evaluation criteria.

3.9 Best and Final Offer

When deemed appropriate by the Contract Review Team, after the submission of Proposals but before the final selection of the successful Proposal(s), TTU may permit Proposers to revise their Proposals in order for TTU to obtain a best and final offer. TTU is not bound to accept the best and final offer if it does not represent the Best Value to TTU as determined by the Contract Review Team.

3.10 Protest Procedures

Any actual or prospective Proposer or Contractor who believes they have been aggrieved in connection with the Solicitation, evaluation, or Award of a Contract may formally protest to the Assistant Vice President and Chief Procurement Officer.

https://www.depts.ttu.edu/procurement/resources/training-and-work-aids/documents/purchasing/Vendor-Protest- Procedures-2022.pdf

3.11 Contract Documents

The Contract entered into by the parties shall consist of the RFP, the Proposal, specifications (if applicable), and a written Contract (if applicable). When an expenditure is required, the Purchase Order terms and conditions will also apply. All of which shall be referred to collectively as the Contract documents.

3.12 Not Exclusive

Proposer acknowledges and agrees that the Contract with TTU is non-exclusive and TTU has the right to engage with other proposers for similar or identical scopes of work, and to purchase similar or identical Services from other proposers. Any term or provision in the Proposer’s terms indicating the Contract is exclusive is expressly rejected and is null and void.

https://www.depts.ttu.edu/procurement/resources/training-and-work-aids/documents/purchasing/Vendor-Protest-Procedures-2022.pdf https://www.depts.ttu.edu/procurement/resources/training-and-work-aids/documents/purchasing/Vendor-Protest-Procedures-2022.pdf

Rev. August 8, 2024 Page 10 of 20

SECTION 4

ADMINISTRATIVE REQUIREMENTS

4.1 Primary Contact ("Primary Contact")

John Westley Leake Solicitations.purchasing@ttu.edu Texas Tech University TTU Plaza Suite # 408 Box 41094 Lubbock, TX 79409-1094

4.1.1 All communication relating to this RFP must be submitted in writing by the date indicated in the Schedule of

Events. Questions and Addenda issued related to the RFP, if any, will be posted on the TechBid website.

Only those replies to questions made by formal written Addenda shall be binding. Oral and other interpretations or clarification will be without legal effect. Note: It is the responsibility of the Proposer to review TechBid for any Addenda posted. For any TechBid system issues, please email solicitations.purchasing@ttu.edu.

Questions must be emailed or submitted in writing to the TTU Primary Contact.

4.1.2 Except as provided in this RFP (e.g ., designated Point of Contact) and as otherwise necessary for the conduct of existing TTU business operations, Proposers are expressly and absolutely prohibited from engaging in communications with TTU personnel who are involved in any manner in the drafting of the RFP, in the review or evaluation of the Proposals, in the selection of a Contractor, Negotiation, or formalization of a Contract. If any Proposer engages in conduct or communications that TTU determines is contrary to the prohibitions outlined in this section, TTU may, at its sole discretion, disqualify the Proposer and remove the Proposal from consideration.

4.2 Event Information

4.2.1 Schedule of Events

TTU intends to follow the timeline below for evaluating, negotiating, and issuing a Contract:

Schedule of Events Event Date Time Notes

Distribution of RFP Wednesday, January 21, 2:00 PM

Central

Deadline for Submission of Written Questions

Wednesday, February 4, 5:00 PM

Central

TTU will collect all questions and respond after the Submission Deadline through an Addendum to the RFP that will be distributed through the TechBid System.

Proposal Due Date Friday, February 20, 2:00 PM

Central

Online Proposal Opening Friday, February 20, 2:00 PM

Central TEAMS LINK

Evaluation of Proposals February-March 2026 mailto:Solicitations.purchasing@ttu.edu https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=TexasTech mailto:solicitations.purchasing@ttu.edu https://teams.microsoft.com/meet/23149863767427?p=2zKV85ZDTazkwbdFzf

Rev. August 8, 2024 Page 11 of 20

Award Recommendation March 31, 2026

* All dates are tentative and subject to change.

4.2.2 Solicitation Conference

A Solicitation Conference will not be conducted for this RFP.

4.2.3 Online Proposal Opening

A public Proposal Opening will be conducted via an online meeting at the date and time shown in Section Schedule of Events. At this time, the names of the Proposers will be read aloud, and the meeting will be terminated. No pricing or other information will be discussed at this meeting. The access information for the meeting is:

For convenience, Proposers may request a list of Proposals received by contacting the TTU Primary Contact after the opening. All submitted Proposals become the property of TTU after the RFP submission deadline and will not be returned.

In the event of change in time, date, access information, or location of the Proposal Opening, notification will be provided by means of an Addendum to the RFP and distributed through the TechBid System.

4.3 References

The Proposer must submit a list of five clients and contact information for whom similar goods and services have been provided. These clients may be contacted by TTU, and the information received will be used during the evaluation and assessment of the Proposer's performance.

4.4 Licenses

Proposers must submit verification that the Proposer has all licenses (including, but not limited to, software licenses) necessary for the work contemplated under this RFP, as applicable e.g., business licenses, business certifications, professional licenses, third party software licenses, if applicable, etc. Licenses may be verified during the evaluation process.

4.5 Term of Award

The maximum term for an awarded Contract under this RFP is anticipated to begin the date of the last signature, whichever is later, and to expire four (4) years from that date. Unless terminated earlier pursuant to the Contract terms, the Contract would automatically renew for up to four (4) one (1) year renewal terms unless either party provided written notice of its intent not to renew the Contract at least sixty (60) days prior to the end of the initial or then current renewal term. The parties may negotiate and mutually agree on an alternate term.

In accordance with Regents' Rule 07.12, any resulting Contract will require a termination without-cause provision of one hundred and eighty (180) days or less, or the Contract may not exceed five (5) years total term with renewals.

4.6 Veteran Heroes United in Business ("HUB") Firms

TTU endeavors to promote full and equal opportunity for businesses to supply TTU with Goods or Services

Rev. August 8, 2024 Page 12 of 20 necessary to support TTU's educational mission. In this regard, TTU commits to selecting Proposers in accordance with (i) TTU needs, (ii) TTU resources, (iii) guidelines established by the Texas legislature and Texas Procurement and Support Services ("TPASS"), and (iv) TTU Operating Policies and Procedures for contracting with HUBs. Proposers shall provide TTU full access to documentation relating to the HUB program and any HUB Subcontracting Plan. Failure to comply with any provision of the State or TTU's HUB regulations may result in rejection of any Proposal or immediate cancellation of any Contract.

TTU is relying upon Proposer's expertise to fully identify subcontracting opportunities that best align with the TTU organization and this RFP. Proposers who intend to subcontract are responsible for identifying all areas that will be subcontracted.

4.7 HUB Subcontracting Plan (“HSP”)

TTU has determined that there are subcontracting opportunities expected in the performance of the Scope of Work of this Solicitation. An HSP Commitment Letter (“HUB Letter”) will be required with each submission of a Proposal to this RFP. An example of a HUB Letter has been provided (Attachment B) for reference. The HUB Letter will state the Proposer’s intent to submit a completed HSP, and any supporting documentation required per the HSP (e.g., proof of Good Faith Effort) when requested by Procurement Services and/or a supplemental Construction Agreement. Proposers must submit a completed HSP regardless of the Proposer’s HUB Vendor status, the intent to subcontract, or the intent to self-perform.

If a properly submitted HSP contains minor deficiencies (e.g., failure to sign or date the HSP, failure to submit already-existing evidence that three HUBs were contacted), TTU may contact the Proposer for clarification to the HSP if it contains sufficient evidence that the Proposer developed and submitted the HSP in good faith. Failure to submit an HSP in accordance with this section will result in disqualification of the Proposal..

4.7.1 HSP Resources

i. HSP preparation assistance: solicitations.purchasing@ttu.edu.

ii. Fillable HSP form: http://www.depts.ttu.edu/procurement/forms/documents/hub/procurement-hub-subcontracting-plan-checklist.pdf.

iii. State of Texas Centralized Master Bidders List:

https://mycpa.cpa.state.tx.us/tpasscmblsearch/tpasscmblsearch.do

4.7.2 TTU’s FY 2026 HUB Goals are:

i. 1% for all categories

4.8 Right to Modify, Rescind, or Revoke the RFP

TTU reserves the right to modify, revoke, or cancel this RFP in whole or in part at any time before the date on which TTU executes a Contract with the selected Proposer(s).

4.9 Rights of Review and Award

TTU reserves the right to accept or reject any and all Proposal or any part of a Proposal and waive informalities, technical defects, and minor irregularities in the Proposals received. Further, TTU reserves the right to make a single award, split awards, make multiple awards, or no award whichever is in the best interest of TTU. This RFP does not commit TTU to select a Proposer or to award a Contract to any Proposer.

mailto:solicitations.purchasing@ttu.edu http://www.depts.ttu.edu/procurement/forms/documents/hub/procurement-hub-subcontracting-plan-checklist.pdf http://www.depts.ttu.edu/procurement/forms/documents/hub/procurement-hub-subcontracting-plan-checklist.pdf https://mycpa.cpa.state.tx.us/tpasscmblsearch/tpasscmblsearch.do

Rev. August 8, 2024 Page 13 of 20

TTU has the right to reissue this RFP in order to gain additional competitive Proposals. If TTU reissues this RFP, any Proposer who has submitted a Proposal, may elect to resubmit the original Proposal.

A Proposal consisting of only alternate Goods or Services (i.e., a Proposal that offers Goods or Services different from those requested by this RFP and is not otherwise invited) may be considered non-responsive by TTU and is subject to rejection. TTU shall reject a Proposal if the financial Proposal was not arrived at independently without collusion, consultation, communication, or agreement as to any matter relating to such prices with any other potential Proposer. Proposals which are qualified with conditional clauses, revised clauses, alterations, or items not called for in the RFP, or irregularities of any kind, are subject to disqualification by TTU, at its option, regardless of the time of detection. TTU shall consider any of the foregoing prohibited actions to be grounds for Proposal rejection or Contract termination and may result in debarment of the Contractor from future TTU Solicitations.

TTU reserves the right to evaluate Proposals against any governmental agency, institution of higher education, or purchasing cooperative contract to determine Best Value.

4.10 Signature and Certification of Proposer

The Proposal must be signed and dated by a representative of the Proposer who is legally authorized to bind the Proposer to the terms and conditions contained in this RFP and can ensure compliance with the submitted Proposal.

Each Proposer submitting a Proposal certifies to (a) the completeness and accuracy of the information provided in the Proposal and (b) the authority of the individual whose signature appears on the Affirmation and Conflict of Interest to bind the Proposer. Proposals submitted without the required signature will be disqualified.

4.11 Compliance with Applicable Laws, Regulations, Ordinances, TTU System Regents’ Rules, and TTU Operating Policies and Procedures

By submitting a Proposal, the Proposer agrees to and shall comply with all applicable local, State, and federal laws and regulations, as well as all applicable regulations and the Operating Policies and Procedures of TTU. TTU Operating Policies and Procedures may be accessed at http://www.depts.ttu.edu/opmanual/ and TTU System Regents’ Rules may be accessed at http://www.texastech.edu/board-of-regents/regents-rules.php. TTU System regulations may be accessed at https://www.texastech.edu/offices/cfo/regulations.php.

4.12 Compliance with RFP Requirements

By submitting a Proposal and by signing the Affirmation and Conflict of Interest, the Proposer agrees to be bound by the requirements set forth in this RFP, TTU’s General Terms and Conditions contained in the RFP, as well as the TTU Purchase Order terms and conditions, all of which will be incorporated into any Contract awarded by TTU. If the Proposer takes exception to any of the terms or cannot agree to be bound by all terms, TTU, at its sole discretion, may review and, if deemed in TTU’s best interest, disqualify the Proposal from consideration.

4.13 Binding Effect of Proposal

Unless otherwise agreed in writing signed by the Chief Procurement Officer, or their designee, each Proposer agrees to and shall be bound by the information and documentation provided with the Proposal, including prices quoted for Goods or Services. Proposals shall be valid for TTU’s acceptance until the award of the Contract(s) to allow time for evaluation, selection, Negotiations, and any unforeseen delays. Proposals, if accepted, shall be incorporated into the executed Contract and remain valid for the duration of the Contract.

4.14 Use and Disclosure of Information

Proposers acknowledge that TTU is an agency of the State of Texas and is therefore required to comply with the Texas Public Information Act Texas Government Code Chapter 552. If a Proposal includes proprietary data, trade http://www.depts.ttu.edu/opmanual/ http://www.texastech.edu/board-of-regents/regents-rules.php https://www.texastech.edu/offices/cfo/regulations.php https://statutes.capitol.texas.gov/Docs/GV/htm/GV.552.htm

Rev. August 8, 2024 Page 14 of 20 secrets, or information the Proposer wishes to except from public disclosure, then the Proposer must specifically label such data, secrets, or information as follows: "PRIVILEGED AND CONFIDENTIAL – PROPRIETARY INFORMATION." To the extent permitted by law, information labeled by the Proposer as proprietary will be used by TTU only for purposes related to or arising out of the (a) evaluation of Proposals, (b) selection of a Proposer or Proposers pursuant to the RFP process, and (c) Negotiation and execution of a Contract, if any, with the Proposer(s) selected.

If the Proposer marks the entire Proposal or substantive portions of the Proposal as confidential, TTU in its sole discretion may declare the Proposal non-responsive and reject it.

By submitting a Proposal, the Proposer grants a limited license to reproduce the Proposal to conduct an evaluation and to comply with any legal requirement including, but not limited to, the Texas Public Information Act and Texas Legislative Budget Board requirements.

TTU reserves the right to contact references or contact names listed below and shall be free from any liability to Proposer for conducting such inquiry.

4.15 Group Purchase Authority

Texas law authorizes institutions of higher education (defined by §61.003, Education Code) to use the group purchasing procurement method (ref. §51.9335, Education Code). Other institutions of higher education, local, county, and other quasi-governmental entities, independent school districts, and State of Texas agencies may also elect to enter into a contract with the successful Proposer under this RFP based upon any awarded Contract. The Proposer should also note that TTU may procure Goods or Services for itself or on behalf of any TTU System component institution. When submitting a Proposal in response to this RFP, the Proposer should consider proposing pricing and other commercial terms that take into account higher volumes and other expanded Best Value opportunities that could result from the eventual inclusion of TTUS, its other component institutions, and other institutions, governments, and State agencies in the Goods or Services requested in this RFP.

4.16 E-commerce

TTU utilizes the Jaggaer e-commerce platform to issue purchase orders and process invoices. The Proposer agrees to comply with any TTU requirements for participating in electronic commerce.

4.17 Withdrawal or Modification

No Proposal may be changed, amended, or modified after it has been submitted or filed in response to this Solicitation, except for obvious errors or as part of the Negotiation process approved in writing by the Chief Procurement Officer.

However, a Proposal may be withdrawn and resubmitted any time prior to the time set for receipt of Proposals.

Modifications will be allowed on the TechBid website until the deadline for Proposal submittals. No Proposal may be withdrawn after the submittal deadline without approval by TTU, which shall be based on Proposer’s submittal in writing of a reason acceptable to TTU.

4.18 Risk of Loss, Damage, or Delay

Proposer acknowledges and agrees to release and hold harmless TTU, its campus components, Board of Regents, officers, employees, agents, and personnel, from and against any and all claims, liability, damages, and costs, including court costs and attorneys' fees, arising out of or pursuant to a failure to successfully submit or deliver the Proposal to Procurement Services at TTU, as detailed in this RFP.

https://statutes.capitol.texas.gov/Docs/ED/htm/ED.61.htm https://statutes.capitol.texas.gov/Docs/ED/htm/ED.51.htm

Rev. August 8, 2024 Page 15 of 20

4.19 Digital Signature

Proposers must sign documents and correspondence using software approved by the TTU. To be approved by TTU, a signature software platform must: (1) be compliant with the ESIGN Act of 2000, and the Electronic Transaction Act (UETA), (2) must utilize signatory accounts that authenticate users by password, and (3) produce a timestamp for the digital signature. The following three are specifically approved: Adobe Sign and DocuSign. TTU utilizes Adobe Sign for its signature process. TTU will support other digital signature platforms as long as they comply with this policy.

4.20 Proposer Registration

If the Proposer is not already set up as a TTU Vendor, the Proposer will be required to register through TTU’s PaymentWorks system. Any modification to the Proposer’s address, tax identification number, or banking information is required to be modified through PaymentWorks.

4.21 Insurance Requirements

Consistent with its status as an independent contractor, Contractor will carry and cause its Subcontractors to obtain and maintain at least the following insurance, with companies authorized to do business in Texas or eligible surplus lines insurers operating in accordance with the Texas Insurance Code.

TTU in no way warrants that these limits are sufficient to protect the Contractor from liabilities that might arise out of the performance of the Scope of Work. The Contractor will assess its own risks and, if it deems appropriate or prudent, maintain higher limits or broader coverages. The Contractor is not relieved of any liability or other obligations assumed by reason of its failure to obtain or maintain insurance in sufficient amounts, duration, or types.

All policies will be written on a primary basis, non-contributory with any other insurance coverage or self-funded plans which TTU maintains.

4.21.1 The Contractor agrees to furnish insurance certificates reflecting the following coverage:

Type of Coverage Limits of Liability Workers Compensation (Coverage A) Statutory Employer’s Liability (Coverage B) $1,000,000 Commercial General Liability, including products and completed operations

a. General Aggregate $2,000,000

b. Products/Completed Operations Aggregate $2,000,000

c. Each Occurrence Limit $1,000,000

d. Personal Advertising Injury $1,000,000

e. Damage to Rented Premises $50,000

f. Medical Payments (any one person) $5,000 Automobile Liability (covering leased, hired, non-owned and employee non-owned vehicles) Bodily Injury/Property Damage (each accident) $1,000,000 Personal Injury Protection Statutory

NOTE: An umbrella policy may be used to reach required limits.

4.21.2 Commercial General Liability (“CGL”) must include coverage for liability arising from Goods or Services-completed operations and liability assumed under an insured Contract.

i. If the CGL insurance has a general aggregate limit then ISO endorsement CG 25 04 (03/97 Edition) or its equivalent must be added. The Designated Location(s) General Aggregate Limit must be maintained for the duration of the Contract, and the limit must be twice the minimum required http://www.texas-statutes.com/insurance-code

Rev. August 8, 2024 Page 16 of 20 occurrence limit.

ii. Contractor will name TTU, and its Board of Regents, officers, employees, agents, and volunteers as Additional Insureds on ISO endorsement CG 20 26 or its equivalent. The policy shall include ISO endorsement CG 20 01 04 13.

iii. The CGL policy shall contain no endorsements or modifications limiting the scope of coverage for liability assumed under the Contract, or liability arising from pollution.

4.21.3 Builder’s Risk Insurance Coverage

Builder’s Risk coverage, upon TTU’s request, should be adequate and comparable to the needs of the individual projects as detailed by the proposal, the Purchase Order, and/or the project contract.

4.21.4 Additional Insured, Subrogation

All policies must include a waiver of subrogation favoring TTU. With the exception of the Workers' Compensation policy, TTU must be an additional insured on all policies.

4.21.5 Certificates of Coverage

At least thirty (30) days prior to the effective date of the Contract and at least thirty (30) days prior to the commencement of any renewal term of the Contract, or upon renewal of the policies, Contractor shall furnish Procurement Services with certificates of insurance in a form acceptable to TTU, certifying that the Contractor carries the required insurance policies and coverage. The certificates shall be sent to Procurement Services at procurement.insurance@ttu.edu. Failure of TTU to request such certificates does not eliminate the requirement for the Contractor to maintain the required coverage.

4.21.6 Notification of Cancellation

The Contractor will endeavor to notify Procurement Services thirty (30) days before any material change or cancellation of any insurance policy. In the event the Contractor receives notice of modification or cancellation of any of the policies required under any Contract, then prior to the effective date of modification or cancellation of the policy, the Contractor will obtain a policy of insurance affording the required coverage from an insurance carrier acceptable to TTU. If the Contractor fails to obtain such an insurance policy, TTU may immediately terminate the Contract after providing the Contractor with notice of such termination.

4.22 Compensation and Fees

4.22.1 Provide a detailed compensation schedule for the Goods provided or Services to be performed in response to this RFP. Proposed pricing will apply to every TTU department requesting Goods or Services and cannot be limited to select departments. Proposer(s) shall submit a schedule that clearly details the various compensation amounts and fees that will apply if the Proposer is awarded a Contract with TTU. TTU will not be obligated to compensate for any amounts that are not provided in the schedule or not included in the fully executed Contract.

4.22.2 Contract Pricing: Contract prices for Goods or Services will remain firm for twelve (12) months following Contract execution.

i. After the initial twelve (12) month period and on each annual anniversary date of the Contract thereafter, the Contract may be subject to an increase not to exceed three percent (3%). The first escalation would be applicable on the second anniversary of the Contract or the renewal date, based mailto:procurement.insurance@ttu.edu

Rev. August 8, 2024 Page 17 of 20 upon the three percent (3%) increase listed above. Each succeeding year, the same three percent (3%) increase will be used until all remaining optional renewals have been completed.

ii. In the event there is a significant reduction in costs of materials or labor, TTU will work with the Proposer to negotiate a reasonable increase less than the standard three percent (3%).

4.22.3 In addition to the financial offers, please propose a financial commitment to assist TTU. Options may include a signing bonus, scholarships, sponsorship internships, commitment to hire TTU graduates, or a (%) percentage rebate. All offers are subject to TTU approval and Operating Policies and Procedures.

4.23 Invoicing and Payment

4.23.1 Proposer(s) shall submit invoices by electronic means to TTU Payment Strategies

(payment.strategies@ttu.edu) and provide support for allocation of premium to the components as may be required.

4.23.2 Invoices will be paid net thirty (30) days in compliance with Texas laws. All invoices must reference a valid TTU Purchase Order, or the invoice will be returned as non-compliant. No commitment for Goods or Services is valid without a TTU Purchase Order.

4.23.3 Proposer(s) may submit a Proposal for a prompt payment discount.

4.23.4 TTU has established the following payment options for invoices based upon the payment option chosen by the Proposer. TTU requires all contracted Vendors to enroll in automated payment options.

i. Automated Clearing House (“ACH”) transaction

ii. Single-Use Account (“SUA”) card (JP Morgan)

* If TTU is making payment on funds appropriated by the State of Texas, the payment term is net thirty (30) as required by law. TTU will submit an electronic check remittance to the email address on record for all ACH and SUA payments.

mailto:payment.services@ttu.edu

Rev. August 8, 2024 Page 18 of 20

APPENDIX A

DEFINITIONS

Addendum: A written change, addition, alteration, correction, or revision to a Solicitation document or a Contract.

Amendment: An agreed addition to, deletion from, correction, or modification of a Contract signed by all authorized parties. An Amendment may include renewal or extension of a Contract.

Assignment: An authorized legal transfer of contractual rights from one party to another party.

Award: The act of accepting a Bid, Proposal, or Offer, thereby resulting in a Contract or Purchase Order between TTU and the Contractor.

Best Value: The factors to be considered in determining the best overall value for TTU per Texas Education Code §51.9335(b).

Comptroller: The Texas Comptroller of Public Accounts.

Conflict of Interest: A Conflict of Interest refers to a situation in which an employee's financial, professional, or other personal considerations may directly or indirectly affect, or have the appearance of influencing, the TTU employee's judgment in exercising any duty or responsibility, including the conduct or reporting of research, owed to TTU (see TTU OP 10.20).

Contract: A legally binding written agreement executed between TTU and a second party in which the parties agree to perform in accordance with the obligations therein. Contracts include, but are not limited to, letter agreements, cooperative agreements, memorandums of understanding ("MOU"), Interagency Contracts, Interlocal Contracts, easements, licenses, leases, and Purchase Orders (see Regents’ Rules Chapter 07).

Contract Administration: Following the contract award, the TTU requesting department-level actions to oversee full compliance with all of the terms and conditions contained within a Contract.

Contract Administrator: The Contract Administrator is the department-level individual responsible for adherence to all provisions contained within a Contract and for managing the performance of the Contract.

Contract Close-out: The process conducted upon completion of the Contract during which the Contract Administrator confirms and documents compliance with the terms and conditions of the Contract, final deliverables are received, and outstanding payments processed.

Contract Management: The complete contract process from planning through Contract close-out.

Contract Review Team: A team comprised of such members as the Contract Manager, the Contract Administrator, and, as needed, cross-functional members such as subject matter experts, information technology, risk management, legal, and price/cost analysts. The size and the members of the team are dependent on the nature and complexity of the project.

Contractor: An entity or individual contracted to provide Goods or Services to TTU. For this RFP, Contractor is used interchangeably with the term “Proposer.” In some instances, the Contractor may be referred to as the supplier.

Escalation Clause: A provision in a Contract that allows for increasing or decreasing the Contract price for Goods or Services in step with market prices, an agreed-upon benchmark such as the consumer price index (“CPI”), or when maintenance and operating costs increase or decrease.

Fiscal Year (“FY”): The twelve (12) month period starting September 1 and closing on August 31 that is consistent with the State’s annual budget.

Goods: Includes salable or usable items such as supplies, materials, merchandise, consumables, commodities, solutions, manufactured items, or equipment.