ESBD_440364_1753734131379_02. Statement of Work TxDOT 929-31-49609.pdf

STATEMENT OF WORK

TxDOT 929-31-49609

DATED: JUNE 2025

1-5

TEXAS DEPARTMENT OF TRANSPORTATION

MAINTENANCE AND REPAIR OF PAVEMENT FRICTION TESTER

This statement of work (SOW) is a product of the Texas Department of Transportation (TxDOT).

This SOW may not be sold for profit or monetary gain. If this document is altered in any way, the header and any and all references to TxDOT must be removed. TxDOT does not assume nor accept any liability when this specification is used in the procurement process by any other entity.

1. SCOPE: The purpose of this Statement of Work (SOW) is to establish the requirements for maintenance, and repair services for TxDOT Pavement Friction Tester (PFT) units. All services must be performed by Dynatest using original equipment manufacturer (OEM) parts and must include onsite technical training for TxDOT personnel.

2. LOCATION: Services must be performed at the following two locations:

2.1. Texas Department of Transportation Austin District 5501 North FM 973 Austin, TX 78724.

2.2. Texas A&M Transportation Institute, (TTI) - Bryan District 1111 Rellis Pkwy, Bryan, TX 77807.

3. DEFINITIONS OF TERMS AND ACRONYMS

3.1. SOW – Statement of Work

3.2. PFT – Pavement Friction Tester

3.3. EPA – Environmental Protection Agency

3.4. TCEQ- Texas Commission on Environmental Quality

3.5. ASE – Automotive Service Excellence

4. EQUIPMENT TO BE SERVICED: The type of equipment to be serviced is not limited to the items referenced in Attachment A – Equipment List.

5. SERVICE REQUIREMENTS: Vendor must:

5.1. Provide a detailed written cost estimate via email for approval by the TxDOT equipment shop supervisor or designee prior to performing any work.

5.1.1. The cost estimate must include, at a minimum, the number of labor hours required, the number of technicians needed to complete the job, an itemized cost of parts (separate from labor), and the estimated completion date.

5.2. Obtain written approval from the designated TxDOT representative for all labor, parts, and materials needed to complete the diagnosed repair prior to beginning work.

2-5

5.3. Complete all repairs by the TxDOT-approved completion date. If additional time is needed, submit a written request for an extension to the TxDOT equipment shop supervisor or designee. TxDOT will respond with written approval or denial.

5.4. Notify the TxDOT representative or designee via phone or email on the day repairs are completed.

5.5. Be responsible for any damage to TxDOT equipment or its contents while in the vendor’s care. Repairs must be completed at the vendor’s expense.

5.6. Provide, upon request, monthly or annual reports listing all TxDOT repair activity, itemized by equipment number, repair type, and cost.

5.7. Allow TxDOT to inspect completed repairs through visual inspection, test drive, or other means as determined by TxDOT.

5.8. Perform four onsite visits (each consisting of 40 hours of service over one week) to support inspection, repair, training, and calibration of Pavement Friction Testers (PFTs). While tasks may be tailored to TxDOT’s needs, the general scope for each visit includes:

5.8.1. Visit 1 – Inspection, Diagnosis, and Introductory Training: The Vendor shall inspect and diagnose up to three (3) Dynatest PFTs and provide written service recommendations with labor and parts estimates.

Additional units may be visually inspected, but only three will be fully serviced under this contract. Estimates for any additional units may be submitted separately. The vendor shall also provide hands-on introductory training to TxDOT personnel on basic operation, safety, preventive maintenance, and troubleshooting.

5.8.2. Visit 2 – Repairs, Test/Tune, and Introductory Operational Training:

The vendor shall complete all approved repairs on the three (3) PFTs using the OEM parts identified and ordered after Visit 1. Upon completion of repairs, the vendor shall perform a full “Test & Tune” on each unit to verify operational readiness. The vendor shall also conduct an introductory training session that includes a brief classroom overview of PFT operational procedures, live roadway data collection with TxDOT personnel, and a hands-on Q&A session. This training is intended to familiarize new operators with the basic use of the equipment.

5.8.3. Visit 3 – In-Depth Training on Operations, Maintenance, and Troubleshooting: This visit shall be scheduled after TxDOT personnel have gained operational experience with the PFTs. The vendor shall provide in-depth training on advanced PFT operation, OEM-recommended maintenance practices, and diagnostic troubleshooting techniques. A review of previously delivered training shall be conducted, followed by structured Q&A sessions that address real-world usage, field challenges, and technical questions from TxDOT personnel.

3-5

5.8.4. Visit 4 – Operations Review and OEM Calibration: The vendor shall conduct a final operational review of the three (3) serviced PFTs after their deployment on larger-scale TxDOT projects. This visit shall include a follow-up training session with open Q&A to reinforce prior instruction. The vendor shall also perform OEM-standard calibration of all three PFT units. Calibration services shall take place at either the Austin or College Station location, as coordinated with TxDOT.

5.9. The vendor shall provide a total of 40 hours of remote technical support following the final training and calibration session. Support shall be available by phone, email, or virtual meeting and may be used to assist TxDOT personnel with troubleshooting, diagnostics, or operational questions related to the PFTs. All remote support activities must be documented and tracked against the 40-hour total.

6. TIME FOR COMPLETION: The total term for all work, including onsite visits, parts procurement, training, calibration, and post-visit remote support, shall not exceed nine (9) months from the date of contract execution. Any delays due to part lead times, weather, or TxDOT scheduling must be communicated in writing and approved by TxDOT.

7. FACTORY-TRAINED TECHNICIAN: The vendor must provide the services of a competent, factory-trained technician to deliver up to forty (40) hours of instruction to TxDOT personnel. The training must cover, at a minimum, safety, operation, routine diagnostics, and preventive maintenance of the Dynatest Pavement Friction Tester (PFT).

All training shall take place on TxDOT premises, on dates and times mutually agreed upon by the vendor and TxDOT.

8. REPLACEMENT PARTS: The vendor must provide:

8.1. New Materials and OEM Replacement Parts: All replacement parts must be new and Original Equipment Manufacturer (OEM). The use of used, demonstrator, wrecked, or discontinued parts or materials is strictly prohibited. If OEM parts are not available, the vendor must obtain prior written approval from the TxDOT equipment shop supervisor. Any approved non-OEM parts must meet or exceed the quality and performance standards of the original OEM parts.

8.2. Remanufactured or Rebuilt Parts: Remanufactured or rebuilt parts may only be used when new parts are unavailable and with prior written approval from the TxDOT equipment shop supervisor. All rebuilt parts must include a minimum 90-day warranty covering both parts and labor. The vendor must provide proof of warranty to TxDOT upon request.

8.3. Removed Parts for Inspection: TxDOT reserves the right to request and inspect any parts removed during the repair process.

8.4. Parts List – Attachment B: Parts List for specific part types and descriptions that may be required when a vehicle is out of service. This list allows the vendor to identify possible replacement parts needs under this contract.

9. PRICING AND INFORMATION: The vendor must:

9.1. Provide the hourly labor rate on the Pricing Schedule.

9.2. Provide the percentage discount or markup rate for parts on the Pricing Schedule.

9.3. Provide the number of technicians, including the number of ASE/OEM-certified

4-5 technicians per location, on the Pricing Schedule

9.4. Provide rates and charges associated with training services.

10. VENDOR DELIVERABLES

The vendor must provide the following deliverables:

10.1. Supply and delivery of OEM replacement parts for Pavement Friction Testers (PFTs) as requested by TxDOT.

10.2. Initial onsite inspection, diagnostic services, and ordering of required OEM parts.

10.3. Installation of OEM parts, system test and tune, and introductory operations training during the second site visit.

10.4. In-depth training on PFT operation, maintenance, and troubleshooting provided by factory-trained technicians during the third visit.

10.5. Final visit to conduct operational review and calibration of all PFT units using OEM-certified calibration tools.

10.6. A total of 40 hours of remote technical support following the final visit, available via phone, email, or virtual sessions, to assist with diagnostics, troubleshooting, and operational questions.

11. WARRANTY REQUIREMENTS

11.1. PERFORMANCE AND MATERIALS WARRANTY: The vendor must guarantee all work, equipment, and materials provided against defects in workmanship. The vendor must satisfactorily correct, at no cost to TxDOT, any defect that becomes apparent within a minimum of six months from the date of acceptance, inspection, and approval by TxDOT personnel.

11.2. If vendor is notified of faulty performance and materials, the vendor must satisfactorily correct or repair, at no cost to TxDOT, the portions of work deemed by TxDOT to be faulty, defective, or erroneous within a maximum of 30 days from the date of inspection and approval by TxDOT personnel or refund to TxDOT the charge paid by TxDOT, which is attributable to the portions of the faulty, defective, or erroneous work, including the costs to have another vendor perform the work to correct the faulty, defective, or erroneous work.

12. VENDOR PERFORMANCE: Vendor performance must be monitored on a regular basis by TxDOT.

12.1. An unsatisfactory performance determination includes, but is not limited to:

12.1.1. Failure to deliver any portion of the equipment.

12.1.2. Any requirement not met as outlined in the equipment requirements determined by TxDOT upgrade substitution suggested and accepted at no additional cost to TxDOT.

NOTE: Unsatisfactory performance may result in a negative vendor performance report, or cancellation of the contract or both, in addition to any other rights, liquidated damages and remedies provided by the contract or allowed by law.

5-5

12.2. An exceptional performance determination includes, but is not limited to:

12.2.1. Services completed early upon TxDOT’s member request.

12.2.2. Product upgrade substitution suggested and accepted at no additional cost to TxDOT.

12.2.3. Vendor commended for exceptional customer service; exceptional service provided.

NOTE: Satisfactory performance may result in a positive vendor performance report.

13. WORK HOURS: Regular work hours are 8:00 AM to 5:00 PM and regular hourly rates will apply. Off-shift hours are 5:01 PM to 7:59 AM and off-shift hourly rate will apply. Off-shift work must be pre-approved by TxDOT prior to the vendor engaging in the work.

14. TRAVEL: Overnight travel is allowed under this contract and will be authorized by TxDOT on an as-needed basis. All travel must be pre-approved by TxDOT.

Unit Number Truck VIN No. Trailer VIN No.

TX DOT 1295 PFT #1 - 5319-K 1FD8W3GT9GEB43878 1D9PN1317DM495126

TX DOT 1295 PFT #2 - 4804-K 1FD8W3GT1FEB55487 1D9PN1310EM495128

TX DOT 1295 PFT #3 - 4803-K 1FD8W3GTXFEB55486 1D9PN1312EM495129

TX DOT 1295 PFT #4 - 4382-K 1FD8W3GT2EEA74318 1D9PN1317FM495130

TX DOT 1295 PFT #5 - 3577-K 1FD8W3GT6HEC03651 1D9PN1319FM495131

TX DOT 1295 PFT #6 - 3523-L 1FD8W3GT0HEC81326 1D9PN1314GG495134

TX DOT 1295 PFT #7 - 371320001 1FDRF3GT7LEC51060 1D9PN1315HG495130

EQUIPMENT LIST

Attachment A

Dyantest 1295 PFT Truck and Trailer VIN No.

STATEMENT OF WORK

TxDOT 929-31-49609

1-1

No. Description Qty. per Build

Unit of Measure Code

1000116 Bottom Hitch Slide-Bushing-P90-6 (Alter 016421) 1.00 EA 1000896 1/4" Female NPT Air Fitting Coupler 1.00 EA 1001118 Top Hitch Slide-Bushing-FL89-6 1.00 EA 1001438 Hitch Ball 2" x 1-1/4" Shank 1.00 EA 1003006 Weld On Tie Down D-Rings - RAW 2.00 EA 1002687 Hitch Screw 1X5 Standard 1.00 EA 1000885 Bumper Slide Top RAW 1.00 EA 1002690 Bolt on Slide 11.5 Tall Black Powder Coat 1.00 EA 1003309 Hitch Assembly, 2017 Ford F350 Black Powder Coat 1.00 EA 1000897 Spin-Pulley Ring-12800M114D (PAIR) 1.00 EA 1000898 Spin-Pulley Sleeve-12800M11 (PAIR) 1.00 EA 2000078 Alter Pulley-Driveshaft 3.5 1.00 EA 2000079 Alter 3.5 Driveshaft Pulley 1.00 EA 2000414 Flow Board Assembly 1.00 EA 1200187 IDE 40/44 Pin to Compact Flash Adapter 1.00 EA 1000698 small VCU CONNECTOR 192900-0057 1.00 EA 1000700 Small VCU BACKSHELL 192900-0497 1.00 EA 1001843 RAM 2.5" Round Base Small Ball 1.00 EA 1001842 RAM V-Base Rail Yoke Clamp 1.00 EA 1001844 Dbl Socket Arm (medium) for 1" Balls-3" 1.00 EA

1000411 1295 FACE PANEL 1.00 EA

1002544 Wing Handle Less Cam for VCU 1.00 EA 1001854 Cam Lock 1.00 EA 1001856 Spare Key 1.00 EA 1000413 Enc-SS VCU Enclosure w/Lid 1.00 EA 1000414 CompactFlash Memory Card 128Mb 1.00 EA

1000417 DIGITAL IO CARD - RTD DM6810 1.00 EA

1000418 DMM32XAT 3 Ch 16bit PCB 1.00 EA 1000422 Fan 1.00 EA 1002669 WinSystems PC/104 1.00 EA 1002670 Cable Set for WinSystems 1.00 EA 2000415 RTD Interface Board Assembly 1.00 EA 2000416 Form Fit PSU Board Assembly 1.00 EA 2000411 1295 Form Fit Assembly 1.00 EA 1004511 RJ45 Bulkhead connector 1.00 EA COMPUTEUSE 2000021-Current Model Laptop Computer 1.00 EA 1001171 RAM Laptop Mount, Universal 1.00 EA 1000597 Con-MS3100E-36-10S (PFT Trailer Signal Bulkhead) 1.00 EA 1000727 Con-Clamp-MS3057-24A 2.00 EA 1000598 Cover-9760-36 (Truck) 2.00 EA 1000596 Con-MS3100A-36-9S (PFT Trailer Power Bulkhead) 1.00 EA 1000478 Boards-RubberBoot-9779-513-20 4.00 EA 1000479 Boards-Rubber Boot-9779-513-24 4.00 EA 1000647 Con-Receptacle-100V-HBL5262 4.00 EA 1000709 110V-Male-Plug 2.00 EA 1001237 LumaPro Cord Reel -3V950 1.00 EA 1200173 Motor Relay 2.00 EA 1002347 BOSCH AUTO. RELAY 12V/40A 5 pin 2.00 EA

Dynatest 1295 PFT Parts List

PARTS LIST

STATEMENT OF WORK

TxDOT 929-31-49609

DATED: JUNE 2025

1-7

Attachment B

1000486 Diode-VS1N3210 1.00 EA 1000516 Misc-USB Flash Drive-Mini 1.00 EA 1000700 Small VCU BACKSHELL 192900-0497 1.00 EA 1000559 Res-Pot-3059Y-1-103LF 1.00 EA 1001231 Transmitter-Temp-EE451 1.00 EA 1001453 Handy Box 4X4 2.00 EA 1001389 4-Hole Handy Box Cover 2.00 EA 1000483 Cable-USB Right Angle Ext. 1.00 EA 1000484 Cable-Cat5e Ethernet Patch 10' 1.00 EA 1200257 Fuse Holder MIDI FLEX HOLDER 2.00 EA 1200258 Fuse Holder Accessories MIDI FLEX BUSBAR 1.00 EA 1000763 Fuse Block-ATC 6-Way 2.00 EA 1001241 Buss Strip 9290T16 1.00 EA 1000784 Buss Strip Cover 1.00 EA 1000617 Con Plug-S267 Plug 1.00 EA 1002779 Push Button Switch 1.00 EA 1000728 Con-1/2" 90 T&B Strain Relief 2269 1.00 EA 2000482 Vehicle Wiring Harness -1295 1.00 EA 1000730 Con-T&B Strain Relief-2521-1/2 2.00 EA 1001023 Fasteners-1/2"LockNut-BL-50 3.00 EA 1001302 O Ring-1/2" Conduit STG50 2.00 EA 1000731 Con-T&B Strain Relief-2522-1/2 1.00 EA 1000733 Con-3/4" 90 Strain Relief 1.00 EA 1004287 FastenerO Ring- 3/4" Conduit STG75 1.00 EA 1004286 Fasteners-3/4"LockNut-BL-75 1.00 EA 1002347 BOSCH AUTO. RELAY 12V/40A 5 pin 2.00 EA 1003032 2" Aluminum Conduit Tee 1.00 EA 1004399 Micro-Epsilon CSmi-SF 15-C1 Surface Temp Sensor 1.00 EA 1004400 Protective Window for CS temp sensor 1.00 EA 1004401 Mounting Bracket for CS temp sensor 1.00 EA 1000147 1-1/4"Conduit Elbow 90o Liquid 2.00 EA 1000281 Fire Extinguish#5 10800-2231-1 1.00 EA 1000302 Bracket-Inverter-24516 1.00 EA 1000529 TrippLite Inverter APS-750 1.00 EA 1000646 2" Straight-Ins Light Tight 2.00 EA 1000648 Con-1/2 Strain Relief 90 deg 1.00 EA 1000730 Con-T&B Strain Relief-2521-1/2 1.00 EA 1000731 Con-T&B Strain Relief-2522-1/2 2.00 EA 1000732 Con-T&B Strain Rel-T2523-1/2 1.00 EA 1000914 Battery Box (Group24) 1.00 EA 1001023 Fasteners-1/2"LockNut-BL-50 5.00 EA 1001041 Fasteners-Nut Wing-6032619 2.00 EA 1001302 O Ring-1/2" Conduit STG50 5.00 EA 1001454 Shock Mount-K85 4.00 EA 1001467 3/8-16 Eye Bolt-Plated Steel 1.00 EA

1002135 ELECTRONICS BATTERY 1.00 EA

1001080 Pressure Switches-604G3 1.00 EA 1001125 Fit-Reducer Bushing 3/4 x 1/2 1.00 EA 1000832 Valve-Check-C400-B10 1.00 EA 1000135 Valve-6D915 Safety 1.00 EA 1001649 6.4-Gallon Air Storage Bottle 2.00 EA 1001766 1/4" NPT Drain Cock 2.00 EA

2-7

PARTS LIST

Attachment B

STATEMENT OF WORK

1000125 Press Gage-2", 0-100 Bottom 1.00 EA 1000915 Water-Seperator - Pneumatic Filter 1.00 EA 1000332 Pneumatic Auto Drain 1.00 EA 1000333 Pneumatic-Dryer-X03-02-000 1.00 EA 1000334 Pneumatic Filler TV12 1.00 EA 1000268 Pneumatic-Desiccant-DRP-85-059 2.00 EA 1001624 Compressors-3HBB-251-M322A 1.00 EA 1001627 B33 Female Socket 1/4NPT 1.00 EA 1000831 P2B-DLEZ-100-PCR-Bearing 1.00 EA 1000187 OB 1.25" Rotary Gear Pump 1.00 EA 1000145 Bushing- H x 7/8 1.00 EA 1001071 Bushing- H x 1" 1.00 EA 1001072 Bushing- G x 7/8 1.00 EA 1000183 Pulley-Gear-44LH100 1.00 EA 1000184 Pulley-Gear-48LH100 1.00 EA 1000342 Pulley-Gear-22LG100 1.00 EA 1000336 Belt-Gear-270L100 2.00 EA 1001445 Belt-Gear-345L100 2.00 EA 1000435 Fit-SS-Hose Barb 1-1/4" 1.00 EA 1000434 Fit-SS-Nip-1-1/4" x Close 4.00 EA 1001219 Fit-SS-Red Bush 1-1/4 X 1-1/2 2.00 EA 1000444 Fit-SS-Street Elbow 1-1/2" 2.00 EA 1000439 Fit-SS-Tee 1-1/2" 1.00 EA 1000442 Fit-SS-Elbow-1-1/2 X 45 2.00 EA 1001517 3/4 SS HD Threaded Plug 2.00 EA 1000448 Fit-SS-Nip 1.5" X 12" T.B.E. 1.00 EA 1000445 Fit-SS-Nip 1-1/2" x Close 3.00 EA 1000446 Fit-SS-Hose Barb-1-1/2" 7.00 EA 1000447 Fit-SS-Hose Barb-1.5 x 1.25 2.00 EA 1001215 Fit-Bronze"Y" Strainer 1.5" 1.00 EA 1001216 Fit-Brass-Ball Valve 1.5" NPT 1.00 EA 1002417 Quick Disc-1-1/2" SS Coupler 1.00 EA 1002419 Quick Disc-1-1/2" Dust Plug 1.00 EA 1002671 Fit-Floor Flange Brass 1-1/2" 2.00 EA 1002688 Pump Support '13 Ford-Burnout and Paint 1.00 EA 1003199 Diesel Pump Mount-2017 Chevy (2000366) 1.00 EA 1001526 Dodge Block Spacer 21-09 - RAW 1.00 EA 1002689 Clutch Mtg Plate-'13 Ford Dies - RAW 1.00 EA

1200215 WATER LEVEL GAUGE - 3 WIRE, 5 HOLE MOUNT, 18.5 1.00 EA

1004218 Clutch, Electro-Magnetic High Press Water Sys 1.00 EA 1000193 Flange SS-2.5" 1.00 EA 1000148 Chevy 300 GL Water Tank-Cap 1.00 EA 1000191 Fit-CH-IPT-17-126-HoseCap 1.00 EA 1000192 Fit-SS-Nip-Pipe 2.5"x5" TBE 1.00 EA 1000200 Tank-Seal-Neoprene1x9.75x6.00 1.00 EA 1000201 Tank-Seal-Neoprene1/2x9.75x2.5 1.00 EA 1000202 Tank-Seal-Neoprene1x9.75x2.5 1.00 EA 1000190 Canopy Trim Ring Material-Alum 1.00 EA 1001708 Mini-B,USB-A Cable 5-POS 3MTR 1.00 EA 1001709 Matrix GTT-USB LCD Display 1.00 EA 1001755 3.5" Dash Display 1.00 EA 1001756 LCD Display Cover 1.00 EA

3-7

PARTS LIST

Attachment B STATEMENT OF WORK

2000253 1295 PFT Trailer Setup 1.00 EA 1000985 Cylinder Support 013946 2.00 EA 1000986 Water Nozzle Mt. RH 013947 1.00 EA 1000963 Jack Block Left 016345 1.00 EA 1000964 Jack Block Right 016346 1.00 EA 1000967 Pipe Clamp 016349 PAIR 2.00 EA 1000968 Water Nozzle Mount Left 016350 1.00 EA 1000969 Sway Bar Mt. Frame 016351 1.00 EA 1000971 Lower Control Arm Mt. 016353 2.00 EA 1000970 Upper Control Arm Mt. 016352 2.00 EA 1000972 Spring Mount 016354 2.00 EA 1000973 Left Front Fender Support 016355 1.00 EA 1000974 Right Front Fender support 016356 1.00 EA 1000975 Fender Support LT. Rear 016357 1.00 EA 1000976 Fender Support Rt. Rear 016358 1.00 EA 1000989 Shock Mount 024587 4.00 EA 1000990 Middle Fender Mt. 024588 2.00 EA 1002835 Saftey Chain Bracket 2.00 EA 1002838 2" Rectangular Mount Coupler 1.00 EA 1004427 1295 Trailer Tongue Pipe - 7753K158 1.00 EA 1000032 1295 Trailer Frame (From Dale) 1.00 EA 1000092 Shims-SS-1270 12.00 EA 1000088 Axle-Shocks-MA-702 (Set of 2) 1.00 EA 1000091 Axle Plug-Dorman-570-003 2.00 EA 1000093 Moog Coil Spring - 6431 (Set of 2) 1.00 EA 1000952 Dorman Stud 7/16-20 10.00 EA 1000089 Bearing-Ball-AWC-10TG 6.00 EA 1000144 Universal Joint Precision 331 2.00 EA 1000094 Shims-Spacer-013203 3.00 EA 1000959 Rod-End TR-10N 2.00 EA 1000103 Arm-Control-Sway-1290 - RAW 1.00 EA 1000480 Assy-AxleTube-1270 RAW 1.00 EA 2000948 Lower Control Arm-1270 FINISHED 2.00 EA 1000950 UPDATE VENDOR - Flanged Yoke-3-2-119 RAW 2.00 EA 1000947 Upper Control Arm 1270 2.00 EA 1000157 Hold Down Clamp-1270 - RAW 2.00 EA 1000951 Wheel Adapters 15 Inch - RAW 2.00 EA 1000953 Dummy Transducer - RAW 1.00 EA 2000335 7" PFT Water Chamber 1.00 EA 1001510 Water Sys-Nozzle-5194M300S3D3 1.00 EA 1000446 Fit-SS-Hose Barb-1-1/2" 4.00 EA 1000444 Fit-SS-Street Elbow 1-1/2" 2.00 EA 1000443 Fit-SS-Elbow-1-1/2 x 90 1.00 EA 1000836 Fit-SS-Nip-1.5" x 51.6 T.B.E. 1.00 EA 1000873 Check Valve#351X1.5NPT,1/4Tap 1.00 EA 1001156 Spring-1.5" Chk Valve .67-1.91 1.00 EA 1001766 1/4" NPT Drain Cock 1.00 EA 1000445 Fit-SS-Nip 1-1/2" x Close 1.00 EA 1000442 Fit-SS-Elbow-1-1/2 X 45 1.00 EA 1002418 Quick Disc-1-1/2" SS Adapter 1.00 EA 1002420 Quick Disc-1-1/2" Dust Cap 1.00 EA 1000513 Numatics Cable-6ft-230-215 1.00 EA

4-7

PARTS LIST

Attachment B

STATEMENT OF WORK

1003026 1.5" Water Nozzle Clamp Block - RAW 1.00 EA 1200512 Brkt Arm, Adjustable Water Nozzle 1.00 EA 1000673 (dont use) Con-Mil-165-10 1.00 EA 1000674 Con-Mil-165-11 (PFT Axle) 1.00 EA 1000666 Con-Mil-3106A-16-10S 2.00 EA 1000724 Con-Clamp-97-3057-1008 2.00 EA 1000474 Boards-Rubber-Boot-9779-513-8 4.00 EA

1002121 A FRAME ATWOOD ELECTRIC JACK 2.00 EA

1000657 Con-Mil-3102A-16-10P (Jacks) 2.00 EA 1000668 Con-MS3106A-36-9P (PFT Trailer Power) 1.00 EA 1000669 Con-MS3106A-36-10P (PFT Trailer Signal) 1.00 EA 1000727 Con-Clamp-MS3057-24A 2.00 EA 1000478 Boards-RubberBoot-9779-513-20 2.00 EA 1000479 Boards-Rubber Boot-9779-513-24 2.00 EA 1001195 Cover-9760-36P (Trailer) 2.00 EA 1000725 Con-Clamp-97-3057-12A 2.00 EA 1000137 Con- MS3106A-20-15P 1.00 EA 1000742 Switch-Tog- Eaton 7693K2 1.00 EA 1000731 Con-T&B Strain Relief-2522-1/2 8.00 EA 1000616 Con-03-06-1041 2.00 EA 1000722 Cinch Terminal Block 15-141 1.00 EA 1000723 Cinch Marker Strip MS-15-141 1.00 EA 1000491 Fuse-3AG-FB-AGC-1/4 1.00 EA

1002079 TAG LIGHTS 1.00 EA

1000654 Con- MS3100A20-15S (20-15SF) 1.00 EA 1001023 Fasteners-1/2"LockNut-BL-50 9.00 EA 1001302 O Ring-1/2" Conduit STG50 9.00 EA 1000786 Cinch Terminal Block-10-140 1.00 EA 1001741 T&B Strain Relief 1-1/2 #2564 1.00 EA 1000837 Fit-SS-Coupling-1.5 Threaded 1.00 EA 1000730 Con-T&B Strain Relief-2521-1/2 3.00 EA 1004236 Feniex Fusion Single Color Surface Mount 4.00 EA 1004237 Feniex Fusion Rotating Bracket 4.00 EA 1000453 ST-W30 Truck Light White LED 2.00 EA 1000452 ST-R61 Truck Light-Red LED 4.00 EA 1000562 Plug PL-3S For LED 6.00 EA 1001250 GR-40 Grommet 6.00 EA 1000640 Con-Pin-02-06-5135 Female 8.00 EA 1002347 BOSCH AUTO. RELAY 12V/40A 5 pin 1.00 EA 1002684 Brake-Caliper-Aluminum 1.00 EA 1000918 Single Brake Pad #1-17D8/18028641 (4 ea. per box) 2.00 EA 1002517 Brake Pad Return Spring 2.00 EA 1000408 Enc-15S19M10180N5QPUF00S1 1.00 EA 1000631 Con-Pin-02-06-6100 (Encoder) Male 4.00 EA 1000641 Con-D Sub-03-06-2041(Encoder) 1.00 EA 1001393 Covers/Caps-Cap-Encoder 1.00 EA 1001542 Misc Sleeve (Left) 1.00 EA 2000124 Flange Assy (black) 1.00 EA 2000125 Spindle Sub-Assy 1.00 EA 1000429 Bearing Support 68Vette 1.00 EA 1000271 Fasteners-Wash-3839832 1.00 EA 1000272 Shims-Corvett 602750 1.00 EA

5-7

PARTS LIST

Attachment B

STATEMENT OF WORK

1000882 Brake Rotor 1.00 EA 1000275 Bearing-M86649/M86610 1.00 EA 1000276 Bearing-LM48548/LM48510 1.00 EA 1000833 Transducer-Clamp-56128 2.00 EA 1001027 Nut- 7/16-20 x 3/4 10.00 EA 1001026 Fasteners-Nut-378137 1.00 EA 1000277 Seals-14079472 1.00 EA 1000278 Seals-3794002 1.00 EA 1000528 Lord Coupling 3/16 x 1/4 1.00 EA 1001391 Brake Shield 5225G 1.00 EA 1001351 Caliper Support 1295 1.00 EA 1002684 Brake-Caliper-Aluminum 1.00 EA 1000918 Single Brake Pad #1-17D8/18028641 (4 ea. per box) 2.00 EA 1002517 Brake Pad Return Spring 2.00 EA 1000408 Enc-15S19M10180N5QPUF00S1 1.00 EA 1000631 Con-Pin-02-06-6100 (Encoder) Male 4.00 EA 1000641 Con-D Sub-03-06-2041(Encoder) 1.00 EA 1001393 Covers/Caps-Cap-Encoder 1.00 EA 1001543 Misc-Sleeve (Right) 1.00 EA 2000124 Flange Assy (black) 1.00 EA 2000125 Spindle Sub-Assy 1.00 EA 1000429 Bearing Support 68Vette 1.00 EA 1000271 Fasteners-Wash-3839832 1.00 EA 1000272 Shims-Corvett 602750 1.00 EA 1000882 Brake Rotor 1.00 EA 1000275 Bearing-M86649/M86610 1.00 EA 1000276 Bearing-LM48548/LM48510 1.00 EA 1000833 Transducer-Clamp-56128 2.00 EA 1001391 Brake Shield 5225G 1.00 EA 1001027 Nut- 7/16-20 x 3/4 10.00 EA 1001026 Fasteners-Nut-378137 1.00 EA 1000277 Seals-14079472 1.00 EA 1000278 Seals-3794002 1.00 EA 1000528 Lord Coupling 3/16 x 1/4 1.00 EA 1001351 Caliper Support 1295 1.00 EA 1001203 1270 Transducer (NEW) (2K) 1.00 EA 1001717 Swivel Trl. Jack 1.00 EA 1002521 10mm Ball Socket 4.00 EA 1000118 Shocks-GSS1563UP 2.00 EA 1000122 3/8" Quick Link 4.00 EA 1000879 Reflector-Amber 5953T15 2.00 EA 1000101 Reflector RED 5953T45 2.00 EA 1000120 Draw Pull Handle Southco 2.00 EA 1000992 Jack Caster-2"-See Notes 1.00 EA 1000121 Stock Drive Handle A 9A44-A40 1.00 EA 1000994 Hoffman Panel 1.00 EA 1000995 Hoffman Panel Spacers 021837 4.00 EA 1000848 Misc-2" Ball Coupler-688-0051 1.00 EA 2005004 1295 Rim/Tire 2.00 EA 1000123 FENDER SS Jeep Style 10x36 2.00 EA 1000993 Hoffman Enclosure (RAW) 1.00 EA 1000977 Lwr. Hood Shock Mt. 016359 2.00 EA

6-7

PARTS LIST

Attachment B STAEMENT OF WORK

1000978 Upr. Hood shock Mt. 016360 RAW 2.00 EA 1000980 1/2x7x13 Hot Roll Steel Flat Bar 3.00 EA 1000981 1 x 7 x 13 Hot Roll Steel Flat Bar 5.00 EA 1000982 1/2x7x45 Hot Roll Steel Flat Bar 2.00 EA 1000983 1 x 7 x 45 Hot Roll Steel Flat Bar 6.00 EA 1000954 Air Panel1295-3640M601 S2, D1 1.00 EA 1000955 Master Cylinder Mtg. Bracket 2.00 EA 1000956 Manifold Block Axle 2.00 EA 1000957 Manifold Block Tongue 1.00 EA 1000878 Valves-QE-2 2.00 EA 1000096 NoShok Gages-25.300.2000 2.00 EA

1004280 NUMATICS MANIFOLD ASSEMBLY 1.00 EA

1000124 Regulators-R22R-02G 1.00 EA 1000102 Safety Brake Regulator 1.00 EA 1000126 Press Gage-1.5",1/8 NPT,0-30 1.00 EA 1000131 Valve-Flow Control F400B 1.00 EA 1000130 Socket-3100 1/4" Male NPT 1.00 EA 1000099 Washer-Plastic-Seal 4.00 EA 1004279 Valve-NUMATICS SOL-PILOT VALVE 1.00 EA 1000129 Misc-H8CP-Quick Disconnect 1.00 EA 1000128 Aero 3/8 NPT Muffler ASP-3 2.00 EA 1000961 Pipe Support GRP-95-734 2.00 EA 1000331 Pneumatic-Air Lubricator 1.00 EA 1001517 3/4 SS HD Threaded Plug 2.00 EA 1001537 Aero 1/8 NPT Muffler ASP-1 1.00 EA 1004165 Solenoid Valve Connectors, Cordset, 3 Pole, ISB 4.00 EA 2000145 Brake Chamber Assy 2.00 EA 1000097 Master Cylinder 1-1/2" Bore - RAW 2.00 EA SHOPINVEShop Inventory 1.00 EA 1200516 Cylinder, Water Nozzle Lift 1.00 EA 1200507 Mounting Bracket, Nozzle Lift Cylinder 1.00 EA 1200527 Rod End, 1/2" 1.00 EA 1200303 Water Tank - 2022 F350 8' bed 300 gal 1.00 EA

7-7

PARTS LIST

Attachment B

STATEMENT OF WORK