ENERGY QAP C16.69-11 DS2 (PCS) (DEC 2016).pdf
PDF 21 KB Posted
- Solicitation number
- SPE60526Q0273
- Issued by
-
Defense Logistics Agency Energy
About this file
This is a Defense Logistics Agency (DLA) Energy diesel fuel specification document establishing requirements for Grade Number 2-D S15 (Ultra-Low Sulfur Diesel) fuel with National Stock Number 9140-01-524-0139 and DLA Energy Product Code DS2.
The specification requires all delivered fuel to conform to ASTM D 975 commercial standards and comply with applicable Federal, State, and local environmental requirements at the geographic location of delivery, including Title V Clean Air Act Permits. The fuel must be visually free of undissolved water, sediment, and suspended matter with a maximum sulfur content of 0.0015 wt%. Three optional additives may be blended into the fuel: a fuel stabilizer additive per MIL-S-53021 with concentrations per QPL-53021, a corrosion inhibitor/lubricity improver per QPL 25017, and a fuel system icing inhibitor not exceeding 0.15 volume percent per ASTM D 5006. Blending of diesel fuel grades or compatible components is permitted via mechanical mixing, agitation in a tank, or inline blending prior to transport loading, provided the resultant product meets all requirements of the desired fuel. Low temperature operability is defined by cloud point specifications equal to or lower than the tenth percentile minimum ambient temperature specified in ASTM D 975 Appendix X5, except in Alaska where fuel support is limited to April-September; in such cases, the cloud point shall meet January tenth percentile minimum temperatures to ensure year-round operational capability.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| ENERGY QAP C1.02 GENERALIZED TECHNICAL GUIDANCE (MAR 2025).pdf | ||
| RFQ.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEFENSE LOGISTICS AGENCY ENERGY Page 1 of 1
8725 JOHN J. KINGMAN ROAD
FORT BELVOIR, VIRGINIA 22060-6222
Signature
Prepared by:
Quality/Technical Support Office Approval
Contracting Approval:
DISTRIBUTION STATEMENT – A: APPROVED FOR PUBLIC RELEASE. DISTRIBUTION IS UNLIMITED
C16.69-11 DIESEL FUEL SPECIFICATION (PC&S) (DLA ENERGY DEC 2016)
NATIONAL STOCK NUMBER PRODUCT NOMENCLATURE DLA ENERGY PRODUCT CODE
9140-01-524-0139 Grade Number 2-D S15 (ULSD) DS2
Supplies delivered under this contract shall conform to all Federal, State, and local environmental requirements applicable to the geographic location of the receiving activity on the date of delivery. This includes delivery of fuel and documentation in a manner consistent with any existing or after-imposed Title V (Clean Air Act) Permits. The list of such requirements contained in this contract is not intended to be a complete list, and the Contractor shall be responsible for determining the existence of all such requirements. Selected regional environmental requirements are highlighted in the SPECIFICATIONS (CONT’D) clause. In the event that a Federal, State, or local environmental requirement is more stringent than a fuel specification contained in this contract, the Contractor shall deliver product that complies with the more stringent fuel specification. Product that fails to meet the more stringent fuel specification will be considered to be a nonconforming supply. Product(s) to be supplied shall fully meet the requirements of the applicable specification(s) as cited above. In the event that compliance with the more stringent fuel specification causes the contractor to incur additional costs, the contractor may request an equitable adjustment.
Product shall conform to commercial specification ASTM D 975. In accordance with this specification, product shall be visually free of undissolved water, sediment, and suspended matter. Product classification is shown above. Maximum sulfur content shall be 0.0015 wt%.
(a) ADDITIVES.
(1) A fuel stabilizer additive conforming to MIL-S-53021, latest revision, may be blended into the fuel to improve the suitability of fuel for long term storage. Permissible additive concentrations are specified in the latest revision of QPL-53021.
(2) A corrosion inhibitor/lubricity improver additive may be blended into the fuel to inhibit corrosion and improve fuel lubricity.
Permissible additive concentration limits are specified in the latest revision of QPL 25017.
(3) A fuel system icing inhibitor may be blended into the fuel to purge small quantities of water from the fuel and prevent the formulation of ice crystals. The additive concentration shall not exceed 0.15 volume percent when tested in accordance with ASTM D 5006.
(b) BLENDING. Blending one grade of diesel fuel with another grade, or other compatible components, to produce a different grade or a variation within a grade is permitted. However, such blending shall be accomplished by mechanical mixing or agitation in a tank, or in-line blending, prior to loading the product into transport equipment, and the resultant product must meet all the requirements of the desired fuel.
(c) LOW TEMPERATURE OPERABILITY. The low temperature performance of diesel fuel shall be defined by the following property:
CLOUD POINT. Unless a more restrictive cloud point limit is specified in the contract schedule, the cloud point shall be equal to or lower than the tenth percentile minimum ambient temperature specified in Appendix X5 of ASTM D 975. Within Alaska for activities where fuel support is limited to April-September, for example "JUN/JUL", "MAY 15 - JUN 15", "DURING SUMMER MONTHS", etc, and fuel will be used year-round in support of continuing operations, the cloud point shall be equal to or lower than the tenth percentile minimum temperature specified in Appendix X5 of ASTM D 975 for the month of January.
MEREDITH.MICHAEL.E.1290973453 Digitally signed by MEREDITH.MICHAEL.E.1290973453 Date: 2016.12.22 15:09:43 -05'00'
BANISZEWSKI.DANIEL.J.1287388698 Digitally signed by BANISZEWSKI.DANIEL.J.1287388698 Date: 2016.12.28 09:07:05 -05'00'
PETERSON.DAVID.W.1074069483 Digitally signed by PETERSON.DAVID.W.1074069483 Date: 2017.01.06 16:51:05 -05'00'
File details come from the government source that posted it. Updated .