A001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

N/A

PAGE

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE NO. 5. PROJECT NO. (If applicable)

A001 01/17/2019 N/A See Block 10

6. ISSUED BY CODE N/A 7. ADMINISTERED BY (If other than Item 6) CODE N/A

Department of Transportation Federal Highway Administration 610 East Fifth Street Vancouver WA 98661-3801

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and Zip Code) 9A. AMENDMENT OF SOLICITATION NO.

X DTFH7017B00031

9B. DATED (SEE ITEM 11)

12/21/2018

10A. MODIFICATION OF CONTRACT/ORDER NO.

N/A

10B. DATED (SEE ITEM 13)

CODE: N/A FACILITY CODE: N/A N/A

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

| X | The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

(x) is extended, ( ) is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

N/A

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A THIS CHANGE ORDER IS ISSUED PURSUANT TO (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN

ITEM 10A.

N/A

B THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (Such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

N/A

C THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

N/A D OTHER (Specify type of modification and authority)

N/A E. IMPORTANT: Contractor n/a is not, n/a is required to sign this document and return n/a copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

OR DOT 35(1), Highway 35 Safety Improvements at Meadows Creek & Mt Hood Meadows Ski Area

See page 2

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15a. NAME AND TITLE OF SIGNER (Type or print) 15a. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

N/A

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

BY_________________________________________ BY N/A___________________________ N/A (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITION NOT USABLE

30-105 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

Amendment No. A001, dated 01/17/2019 Solicitation No. DTFH7017B00031 OR DOT 35(1), Highway 35 Safety Improvements at Meadows Creek & Mt Hood Meadows Ski Area

REVISIONS ARE AS FOLLOWS:

SF 1442, SOLICITATION, OFFER, AND AWARD (Pen & Ink change)

Page A-3, Block 13A. Revises bid opening date from 01/29/2019 to 03/01/2019.

NOTICE TO BIDDERS (Pen & Ink change) Page A-1, Revises questions accepted date from 01/19/2019 to 02/21/2019.

BID SCHEDULE

Page A-7. Revises number of calendar days.

Page A-14. Revises number of calendar days.

CONTRACT CLAUSES

CONTRACT CLAUSES

Page C-17. Revises FAR Clause 52.211-10, Commencement, Prosecution, and Completion of Work (Apr 1984) Alternate I (Apr 1984).

MINIMUM WAGE SCHEDULE

Page D-1 through D-18. Updates Davis-Bacon General Wage Decision Number OR1 to current effective date of 01/04/2019.

SPECIAL CONTRACT REQUIREMENTS

Page E-2, Subsection 102.02, Preparation of Bids. Revises number of calendar days.

Page E-17, Subsection 108.02 Determination and Extension of Contract Time. Revises number of calendar days.

ENCLOSURES

Pages:

A-7 through A-14 C-17 D-1 through D-18 E-2 and E-17

New bid opening date: 03/01/2019

Notice to Bidders: Please submit revised pages A-7 through A-14 with your bid.

A - 7

Bid Schedule

Bidder/Offeror please note: Before preparing the bid, carefully read the Solicitation Provisions. Insert a unit bid price, in figures, for each pay item for which a quantity appears in the bid schedule. Multiply the unit price by the quantity for each pay item and show the amount bid. Should any mathematical check made by the Government show a mistake in the amount bid, the corrected unit price extension shall govern. When the word "LPSM" (Lump Sum) appears as a unit bid price, insert an amount for each lump sum pay item. When a sum based on a fixed rate appears for any pay item in the amount bid column, include the Government inserted amount bid for the item in the total bid amount. Total all of the amounts bid for each pay item and show the total bid amount.

A+B Bidding

When completing the bid schedule, provide the number of calendar days necessary to complete all contract work from the Notice to Proceed until the day of final construction completion, both dates included. The total number of calendar days bid will become the basis for determining the fixed contract completion date (see Subsection 108.03). It is against this date that liquidated damages will be assessed according to Subsection 108.04. The number of calendar days bid may not exceed 204 177 days.

Multiply the number of days bid by the Road User/Administrative Cost of $4,000.00 per day to determine the Road

User/Administrative Cost Subtotal (part B)

Add the Construction Cost Subtotal (Part A) to the Road User/Administrative Cost Subtotal (Part B) to determine the bid schedule Project Total (Part A+B)

Bid Schedule

Project No:OR DOT 35(1)

Project Name:Highway 35 Safety Improvements at Meadows Creek & Mt Hood Meadows Ski Area

Revised by Amendment A001

Glenn.Kutzera Cross-Out

Glenn.Kutzera Line

Glenn.Kutzera Line

A - 8

Contract Quantity Pay Items

20101-0000 CLEARING AND GRUBBING

20410-0000 SELECT BORROW

60220-0000 PRECAST REINFORCED CONCRETE BOX CULVERT (19 FEET SPAN, 10 FEET RISE)(OR35)

60220-0000 PRECAST REINFORCED CONCRETE BOX CULVERT (19 FEET SPAN, 10 FEET RISE)(TEACUP)

Item No. Pay Item No. Description Quantity Unit Unit Price Amount

A0020 15101-0000 MOBILIZATION

ALL LPSM $___LPSM_____ $____________

A0040 15201-0000 CONSTRUCTION SURVEY AND STAKING

ALL LPSM $___LPSM_____ $____________

A0060 15301-0000 CONTRACTOR QUALITY CONTROL

ALL LPSM $___LPSM_____ $____________

A0080 15401-0000 CONTRACTOR TESTING

ALL LPSM $___LPSM_____ $____________

A0100 15501-0000 CONSTRUCTION SCHEDULE

ALL LPSM $___LPSM_____ $____________

A0120 15702-1000 SOIL EROSION CONTROL, TEMPORARY DIVERSION CHANNEL (OR35)

ALL LPSM $___LPSM_____ $____________

A0140 15702-1000 SOIL EROSION CONTROL, TEMPORARY DIVERSION CHANNEL (TEACUP)

ALL LPSM $___LPSM_____ $____________

A0160 15703-2500 SOIL EROSION CONTROL, MULCHING, HYDRAULIC METHOD

1.5 ACRE $____________ $____________

A0180 15705-0100 SOIL EROSION CONTROL, SILT FENCE

2,100 LNFT $____________ $____________

A0200 15705-1400 SOIL EROSION CONTROL, FIBER ROLL

3,000 LNFT $____________ $____________

A0220 15706-0200 SOIL EROSION CONTROL, CHECK DAM

28 EACH $____________ $____________

A0240 15706-2200 SOIL EROSION CONTROL, FILTER BAG

2 EACH $____________ $____________

Bid Schedule Schedule:A Schedule Type:Base

Project No:OR DOT 35(1)

Project Name:Highway 35 Safety Improvements at Meadows Creek & Mt Hood Meadows Ski Area

Revised by Amendment A001

A - 9

A0260 20101-0000 CLEARING AND GRUBBING

2.8 ACRE $____________ $____________

A0280 20220-1000 REMOVAL, INDIVIDUAL TREE

13 EACH $____________ $____________

A0300 20301-1900 REMOVAL OF PIPE CULVERT

3 EACH $____________ $____________

A0320 20301-2400 REMOVAL OF SIGN

4 EACH $____________ $____________

A0340 20302-1200 REMOVAL OF GUARDRAIL

400 LNFT $____________ $____________

A0360 20310-1000 PLUG, EXISTING PIPE

1 EACH $____________ $____________

A0380 20315-0000 SAWCUTTING PAVEMENT

2,969 LNFT $____________ $____________

A0400 20401-0000 ROADWAY EXCAVATION

3,020 CUYD $____________ $____________

A0420 20403-0000 UNCLASSIFIED BORROW

1,550 CUYD $____________ $____________

A0440 20410-0000 SELECT BORROW

440 CUYD $____________ $____________

A0460 20426-1000 DITCH, EXCAVATION (STREAM CHANNEL EXCAVATION)

440 CUYD $____________ $____________

A0480 20701-0100 SEPARATION-STABILIZATION GEOTEXTILE, CLASS 1, TYPE A

12 SQYD $____________ $____________

A0500 25101-0200 PLACED RIPRAP, METHOD A, CLASS 2

4 CUYD $____________ $____________

A0520 30202-2000 ROADWAY AGGREGATE, METHOD 2

3,250 TON $____________ $____________

Bid Schedule Schedule:A Schedule Type:Base

Project No:OR DOT 35(1)

A - 10

A0540 40301-0100 ASPHALT CONCRETE PAVEMENT, TYPE 1

2,200 TON $____________ $____________

A0560 41201-0000 TACK COAT (GRADE CSS-1)

9 TON $____________ $____________

A0580 41301-0000 ASPHALT PAVEMENT MILLING (0 TO 2-INCH DEPTH)

1,974 SQYD $____________ $____________

A0600 41301-0600 ASPHALT PAVEMENT MILLING, 2-INCH DEPTH (2-INCH DEPTH)

77 SQYD $____________ $____________

A0620 56202-0000 TEMPORARY SUPPORT STRUCTURE

ALL LPSM $___LPSM_____ $____________

A0640 60201-0200 6-INCH PIPE CULVERT

44 LNFT $____________ $____________

A0660 60201-0800 24-INCH PIPE CULVERT

115 LNFT $____________ $____________

A0680 60210-0800 END SECTION FOR 24-INCH PIPE CULVERT

2 EACH $____________ $____________

A0700 60220-0000 PRECAST REINFORCED CONCRETE BOX CULVERT (19 FEET SPAN, 10 FEET

RISE)(OR35)

120 LNFT $____________ $____________

A0720 60220-0000 PRECAST REINFORCED CONCRETE BOX CULVERT (19 FEET SPAN, 10 FEET

RISE)(TEACUP)

56 LNFT $____________ $____________

A0740 61701-5150 GUARDRAIL SYSTEM MGS, TYPE 4, CLASS B WOOD POSTS (ODOT 31", TYPE

2A)

1,675 LNFT $____________ $____________

A0760 61702-1500 TERMINAL SECTION, TYPE MGS TANGENT (ODOT NON-FLARED ENERGY

ABSORBING)

3 EACH $____________ $____________

Bid Schedule Schedule:A Schedule Type:Base

Project No:OR DOT 35(1)

A - 11

A0780 62201-0250 DUMP TRUCK, 10 CUBIC YARD MINIMUM CAPACITY

30 HOUR $____________ $____________

A0800 62201-3400 HYDRAULIC EXCAVATOR, 1 CUBIC YARD MINIMUM CAPACITY WITH

THUMB ATTACHMENT

40 HOUR $____________ $____________

A0820 62301-0000 GENERAL LABOR

30 HOUR $____________ $____________

A0840 63302-0000 SIGN SYSTEM

262 SQFT $____________ $____________

A0860 63309-1000 DELINEATOR, TYPE SNOW POLE

24 EACH $____________ $____________

A0880 63313-0000 RUMBLE STRIP

1,303 LNFT $____________ $____________

A0900 63313-1000 RUMBLE STRIP, SHOULDER

2,600 LNFT $____________ $____________

A0920 63316-1000 REMOVE AND RESET SIGN

6 EACH $____________ $____________

A0940 63401-0300 PAVEMENT MARKINGS, TYPE B, SOLID

22,440 LNFT $____________ $____________

A0960 63401-0400 PAVEMENT MARKINGS, TYPE B, BROKEN

3,476 LNFT $____________ $____________

A0980 63401-0450 PAVEMENT MARKINGS, TYPE B, DOTTED

314 LNFT $____________ $____________

A1000 63405-0500 PAVEMENT MARKINGS, TYPE B, TURN ARROW (ELONGATED)

5 EACH $____________ $____________

A1020 63407-0000 RECESSED PAVEMENT MARKER

201 EACH $____________ $____________

Bid Schedule Schedule:A Schedule Type:Base

Project No:OR DOT 35(1)

A - 12

A1040 63501-0000 TEMPORARY TRAFFIC CONTROL

ALL LPSM $___LPSM_____ $____________

A1060 63502-2000 TEMPORARY TRAFFIC CONTROL, PORTABLE CHANGEABLE MESSAGE SIGN

2 EACH $____________ $____________

A1080 63503-1000 TEMPORARY TRAFFIC CONTROL, PLASTIC FENCE

650 LNFT $____________ $____________

A1100 63507-0700 TEMPORARY TRAFFIC CONTROL, TRAFFIC CONTROL SUPERVISOR

95 DAY $____________ $____________

A1120 63640-0700 RELOCATE ELECTRICAL LINE

ALL LPSM $___LPSM_____ $____________

A1140 64631-0000 ROADSIDE DEVELOPMENT (BIOSLOPE 2-FT)

1,495 LNFT $____________ $____________

A1160 64631-0000 ROADSIDE DEVELOPMENT (BIOSLOPE 4-FT)

976 LNFT $____________ $____________

A1180 64704-1000 MITIGATION, STREAMBED MATERIAL (CONSERVED)(OR35)

100 CUYD $____________ $____________

A1200 64704-1000 MITIGATION, STREAMBED MATERIAL (CONSERVED MIX)(TEACUP)

50 CUYD $____________ $____________

A1220 64704-1000 MITIGATION, STREAMBED MATERIAL (STREAMBED MIX)(OR35)

310 CUYD $____________ $____________

A1240 64704-1000 MITIGATION, STREAMBED MATERIAL (STREAMBED MIX)(TEACUP)

200 CUYD $____________ $____________

A1260 64704-1000 MITIGATION, STREAMBED MATERIAL (RIFFLE MIX)(OR35)

190 CUYD $____________ $____________

A1280 64704-1000 MITIGATION, STREAMBED MATERIAL (RIFFLE MIX)(TEACUP)

150 CUYD $____________ $____________

Bid Schedule Schedule:A Schedule Type:Base

Project No:OR DOT 35(1)

A - 13

Submitted by:____________________________________ Schedule Total:____________

Bid Schedule Schedule:A Schedule Type:Base

Project No:OR DOT 35(1)

A - 14

Bid Schedule Summary

BidSchedule

Schedule A

Part A

Schedule A - Base(A - 8) Bid Total

Part B

Number of Calendar Days* Road User/Administrative Cost Amount Bid

$4,000.00

*The number of calendar days used shall include all weekends, holidays, periods of inclement weather, winter shutdown periods, and all other days during which work may or may not be performed. The number of calendar days bid may not exceed 204 177 days.

Total for Schedule A (A+B)

Submitted By: ________________________________

Bid Schedule

Project No:OR DOT 35(1)

Project Name:Highway 35 Safety Improvements at Meadows Creek & Mt Hood Meadows Ski Area

Revised by Amendment A001

Glenn.Kutzera Cross-Out

Glenn.Kutzera Line

Glenn.Kutzera Line

C-17

(iii) Information that is withdrawn during the 14-calendar-day waiting period by the Government official who posted it in accordance with paragraph (c)(1) of this clause.

(c) The Contractor will receive notification when the Government posts new information to the Contractor’s record.

(1) If the Contractor asserts in writing within 7 calendar days, to the Government official who posted the information, that some of the information posted to the non-public segment of FAPIIS is covered by a disclosure exemption under the Freedom of Information Act, the Government official who posted the information must within 7 calendar days remove the posting from FAPIIS and resolve the issue in accordance with agency Freedom of Information procedures, prior to reposting the releasable information. The contractor must cite 52.209-9 and request removal within 7 calendar days of the posting to FAPIIS.

(2) The Contractor will also have an opportunity to post comments regarding information that has been posted by the Government. The comments will be retained as long as the associated information is retained, i.e., for a total period of 6 years. Contractor comments will remain a part of the record unless the Contractor revises them.

(3) As required by section 3010 of Pub. L. 111-212, all information posted in FAPIIS on or after April 15, 2011, except past performance reviews, will be publicly available.

(d) Public requests for system information posted prior to April 15, 2011, will be handled under Freedom of Information Act procedures, including, where appropriate, procedures promulgated under E.O. 12600.

52.209-10 – Prohibition on Contracting With Inverted Domestic Corporations (Nov 2015)

(a) Definitions. As used in this clause-- “Inverted domestic corporation means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Subsidiary” means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

(b) If the contractor reorganizes as an inverted domestic corporation or becomes a subsidiary of an inverted domestic corporation at any time during the period of performance of this contract, the Government may be prohibited from paying for Contractor activities performed after the date when it becomes an inverted domestic corporation or subsidiary. The Government may seek any available remedies in the event the Contractor fails to perform in accordance with the terms and conditions of the contract as a result of Government action under this clause.

(c) Exceptions to this prohibition are located at 9.108-2.

(d) In the event the Contractor becomes wither an inverted domestic corporation, or a subsidiary of an inverted domestic corporation during contract performance, the Contractor shall give written notice to the Contracting Officer within five business days from the date of the inversion event.

52.211-10 Commencement, Prosecution, and Completion of Work (Apr 1984) Alternate I (Apr 1984)

The Contractor shall be required to (a) commence work under this contract within 10 calendar days after the date the Contractor receives the notice to proceed, (b) prosecute the work diligently, and (c) complete the entire work ready for use not later than see bid schedule - to be determined at time of award subject to such extensions as may be authorized. The time stated for completion shall include final cleanup of the premises.

The completion date is based on the assumption that the successful offeror will receive the notice to proceed by April 22, 2019. The completion date will be extended by the number of calendar days after the above date that the contractor receives the notice to proceed, except to the extent that the delay in

Contract Clauses Project: OR DOT 35(1), Highway 35 Safety Improvements at Meadows Creek & Mt Hood Meadows Ski Area

Revised by A001 |

D - 1

General Wage Decision OR DOT 35(1), Highway 35 Safety Improvements at Meadows Creek & Mt Hood Meadows Ski Area Revised by Amendment A001

General Decision Number: OR190001 01/04/2019 OR1

Superseded General Decision Number: OR20180001

State: Oregon

Construction Type: Highway

Counties: Oregon Statewide.

HIGHWAY CONSTRUCTION PROJECTS

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.60 for calendar year 2019 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015.

If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.60 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2019. If this contract is covered by the EO and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must pay workers in that classification at least the wage rate determined through the conformance process set forth in 29 CFR 5.5(a)(1)(ii) (or the EO minimum wage rate, if it is higher than the conformed wage rate). The EO minimum wage rate will be adjusted annually. Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/04/2019

BROR0001-006 06/01/2018

BAKER, BENTON (NORTH), CLACKAMAS, CLATSOP, COLUMBIA, GILLIAM,

HARNEY, HOOD RIVER, LINCOLN (NORTH), LINN (NORTH), MALHEUR

(NORTH), MARION, MORROW, MULTNOMAH, POLK, SHERMAN, TILLAMOOK,

UMATILLA, UNION, WALLOWA, WASCO (NORTH), WASHINGTON AND YAMHILL

COUNTIES

Rates Fringes

BRICKLAYER.......................$ 38.00 19.83

D - 2

OR DOT 35(1), Highway 35 Safety Improvements at Meadows Creek & Mt Hood Meadows Ski Area Revised by Amendment A001

BROR0001-007 06/01/2018

BENTON (SOUTH), CROOK, DESCHUTES, GRANT, JACKSON, JEFFERSON,

KLAMATH, LAKE, LANE, LINCOLN (SOUTH), LINN (SOUTH), MALHEUR

(SOUTH), WASCO (SOUTH) AND WHEELER COUNTIES

Rates Fringes

BRICKLAYER.......................$ 38.00 19.83

CARP9001-001 06/01/2018

ZONE 1:

Rates Fringes

Carpenters:

CARPENTERS..................$ 37.64 16.83

DIVER STANDBY...............$ 49.69 16.83

DIVERS TENDERS..............$ 43.73 16.83

DIVERS......................$ 87.73 16.83

MANIFOLD AND/OR

DECOMPRESSION CHAMBER

OPERATORS...................$ 43.73 16.83

MILLWRIGHTS.................$ 38.17 16.83

PILEDRIVERS.................$ 38.71 16.83

DEPTH PAY:

50 to 100 feet $1.00 per foot over 50 feet 101 to 150 feet 1.50 per foot over 101 feet 151 to 200 feet 2.00 per foot over 151 feet

Zone Differential (Add to Zone 1 rates):

Zone 2 - $0.85 Zone 3 - 1.25 Zone 4 - 1.70 Zone 5 - 2.00 Zone 6 - 3.00

ZONE 1 - All jobs or projects located within 30 miles of the respective City Hall

ZONE 2 - More than 30 miles and less than 40 miles from the respective City Hall

ZONE 3 - More than 40 miles and less than 50 miles from the respective City Hall

ZONE 4 - More than 50 miles and less than 60 miles from the respective City Hall

ZONE 5 - More than 60 miles and less than 70 miles from the respective City Hall

ZONE 6 - More than 70 miles from the respective City Hall.

D - 3

Area Revised by Amendment A001

BASEPOINTS CITIES FOR CARPENTERS (EXCLUDING MILLWRIGHTS,

PILEDRIVERS AND DIVERS)

ALBANY ASTORIA BAKER

BEND BROOKINGS BURNS

COOS BAY CORVALLIS EUGENE

GOLDENDALE GRANTS PASS HERMISTON

HOOD RIVER KLAMATH FALLS LAGRANDE

LAKEVIEW LONGVIEW MADRAS

MEDFORD McMINNVILLE NEWPORT

OREGON CITY ONTARIO PENDLETON

PORTLAND PORT ORFORD REEDSPORT

ROSEBURG SALEM ST. HELENS

THE DALLES TILLAMOOK VANCOUVER

BASEPOINTS FOR MILLWRIGHTS

EUGENE NORTH BEND LONGVIEW

PORTLAND MEDFORD THE DALLES

VANCOUVER

BASEPOINTS FOR PILEDRIVERS AND DIVERS

ASTORIA BEND COOS BAY

EUGENE KLAMATH FALLS LONGVIEW

MEDFORD NEWPORT PORTLAND

ROSEBURG SALEM THE DALLES

* ELEC0048-006 01/01/2018

CLACKAMAS, CLATSOP, COLUMBIA, HOOD RIVER, MULTNOMAH, TILLAMOOK,

WASCO, WASHINGTON, SHERMAN AND YAMHILL (NORTH) COUNTIES

CABLE SPLICER....................$ 44.22 21.50

ELECTRICIAN......................$ 42.60 22.75

HOURLY ZONE PAY:

Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the following listed cities:

Portland, The Dalles, Hood River, Tillamook, Seaside and Astoria

Zone Pay:

Zone 1: 31-50 miles $1.50/hour Zone 2: 51-70 miles $3.50/hour Zone 3: 71-90 miles $5.50/hour Zone 4: Beyond 90 miles $9.00/hour

D - 4

Area Revised by Amendment A001

*These are not miles driven. Zones are based on Delorrne Street Atlas USA 2006 plus.

ELEC0112-001 06/01/2018

BAKER, GILLIAM, GRANT, MORROW, UMATILLA, UNION, WALLOWA, AND

WHEELER COUNTIES

CABLE SPLICER....................$ 45.68 20.60

ELECTRICIAN......................$ 43.50 20.54

ELEC0280-003 01/01/2018

BENTON, CROOK, DESCHUTES, JEFFERSON, LANE (EAST OF A LINE

RUNNING NORTH AND SOUTH FROM THE NORTHEAST CORNER OF COOS

COUNTY TO THE SOUTHEAST CORNER OF LINCOLN COUNTY), LINN,

MARION, POLK AND YAMHILL (SOUTHERN HALF) COUNTIES

CABLE SPLICER....................$ 41.15 17.75

ELECTRICIAN......................$ 41.85 18.95

* ELEC0291-006 09/29/2018

MALHEUR COUNTY

Rates Fringes

CABLE SPLICER....................$ 33.28 5%+12.41

ELECTRICIAN......................$ 30.25 5%+12.41

* ELEC0659-004 02/01/2018

DOUGLAS (EAST OF A LINE RUNNING NORTH AND SOUTH FROM THE NE

CORNER OF COOS COUNTY TO THE SE CORNER OF LINCOLN COUNTY),

HARNEY, JACKSON, JOSEPHINE, KLAMATH AND LAKE COUNTIES

CABLE SPLICER....................$ 57.94 18.27

ELECTRICIAN......................$ 33.94 16.76

ZONE PAY: BASE POINTS ARE FROM THE DOWNTOWN POST OFFICE IN

GRANTS PASS, KLAMATH FALLS, ROSEBURG AND MEDFORD.

ZONE 1: 0-20 MILES $0.00 PER HOUR

ZONE 2: > 20-30 MILES $1.50 PER HOUR

ZONE 3: >30-40 MILES $3.30 PER HOUR

ZONE 4: >40-50 MILES $5.00 PER HOUR

D - 5

Area Revised by Amendment A001

ZONE 5: >50-60 MILES $6.80 PER HOUR

ZONE 6: >60 MILES $9.50 PER HOUR

*THESE ARE NOT MILES DRIVEN. zONES ARE BASED ON DELORNE

STREET ATLAS USA 5.0.

ELEC0932-004 01/01/2018

COOS, CURRY, LINCOLN, DOUGLAS AND LANE COUNTIES (AREA LYING

WEST OF A LINE NORTH AND SOUTH FROM THE N.E. CORNER OF COOS

COUNTY TO THE S.E. CORNER OF LINCOLN COUNTY)

ELECTRICIAN......................$ 38.55 17.46

ENGI0701-005 01/01/2018

ZONE 1:

POWER EQUIPMENT OPERATORS (See Footnote C)

Rates Fringes

POWER EQUIPMENT OPERATOR

GROUP 1.....................$ 41.65 14.35

GROUP 1A....................$ 43.73 14.35

GROUP 1B....................$ 45.82 14.35

GROUP 2.....................$ 39.47 14.35

GROUP 3.....................$ 38.59 14.35

GROUP 4.....................$ 37.51 14.35

GROUP 5.....................$ 36.27 14.35

GROUP 6.....................$ 33.05 14.35

Zone Differential (add to Zone 1 rates):

Zone 2 - $3.00 Zone 3 - $6.00

For the following metropolitan counties: MULTNOMAH;

CLACKAMAS; MARION; WASHINGTON; YAMHILL; AND COLUMBIA;

CLARK; AND COWLITZ COUNTY, WASHINGTON WITH MODIFICATIONS AS

INDICATED:

All jobs or projects located in Multnomah, Clackamas and Marion Counties, West of the western boundary of Mt. Hood National Forest and West of Mile Post 30 on Interstate 84 and West of Mile Post 30 on State Highway 26 and West of Mile Post 30 on Highway 22 and all jobs or projects located in Yamhill County, Washington County and Columbia County and all jobs or porjects located in Clark & Cowlitz County, Washington except that portion of Cowlitz County in the Mt.

St. Helens "Blast Zone" shall receive Zone I pay for all classifications.

D - 6

Area Revised by Amendment A001

All jobs or projects located in the area outside the identified boundary above, but less than 50 miles from the Portland City Hall shall receive Zone II pay for all classifications.

All jobs or projects located more than 50 miles from the Portland City Hall, but outside the identified border above, shall receive Zone III pay for all classifications.

For the following cities: ALBANY; BEND; COOS BAY; EUGENE;

GRANTS PASS; KLAMATH FALLS; MEDFORD; ROSEBURG

All jobs or projects located within 30 miles of the respective city hall of the above mentioned cities shall receive Zone I pay for all classifications.

All jobs or projects located more than 30 miles and less than 50 miles from the respective city hall of the above mentioned cities shall receive Zone II pay for all classifications.

All jobs or projects located more than 50 miles from the respective city hall of the above mentioned cities shall receive Zone III pay for all classifications.

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

Group 1 Concrete Batch Plan and or Wet mix three (3) units or more;

Crane, Floating one hundred and fifty (150) ton but less than two hundred and fifty (250) ton; Crane, two hundred

(200) ton through two hundred ninety nine (299) ton with two hundred foot (200') boom or less (including jib, inserts and/or attachments); Crane, ninety (90) ton through one hundred ninety nine (199) ton with over two hundred (200') boom Including jib, inserts and/or attachments);

Crane, Tower Crane with one hundred seventy five foot (175') tower or less and with less than two hundred foot (200') jib; Crane, Whirley ninety (90) ton and over;

Helicopter when used in erecting work

Group 1A Crane, floating two hundred fifty (250) ton and over; Crane, two hundred (200) ton through two hundred ninety nine

(299) ton, with over two hundred foot (200') boom (including jib, inserts and/or attachments); Crane, three hundred (300) ton through three hundred ninety nine (399) ton; Crane, Tower Crane with over one hundred seventy five foot (175') tower or over two hundred foot (200') jib;

Crane, tower Crane on rail system or 2nd tower or more in work radius

Group 1B

Crane, three hundred (300) ton through three hundred ninety nine (399) ton, with over two hundred foot (200') boom

D - 7

Area Revised by Amendment A001

(including jib, inserts and/or attachments); Floating crane, three hundred fifty (350) ton and over; Crane, four hundred (400) ton and over

Group 2 Asphalt Plant (any type); Asphalt Roto-Mill, pavement profiler eight foot (8') lateral cut and over; Auto Grader or "Trimmer"; Blade, Robotic; Bulldozer, Robotic Equipment (any type); Bulldozer, over one hundred twenty thousand (120,000) lbs. and above; Concrete Batch Plant and/or Wet Mix one (1) and two (2) drum; Concrete Diamond Head Profiler; Canal Trimmer; Concrete, Automatic Slip Form Paver (Assistant to the Operator required); Crane, Boom Truck fifty (50) ton and with over one hundred fifty foot (150') boom and over; Crane, Floating (derrick barge) thirty (30) ton but less than one hundred fifty (150) ton;

Crane, Cableway twenty-five (25) ton and over; Crane, Floating Clamshell three (3) cu. Yds. And over; Crane, ninety (90) ton through one hundred ninety nine (199) ton up to and including two hundred foot (200') of boom (including jib inserts and/or attachments); Crane, fifty

(50) ton through eighty nine (89) ton with over one hundred fifty foot (150') boom (including jib inserts and/or attachments); Crane, Whirley under ninety (90) ton; Crusher Plant; Excavator over one hundred thirty thousand (130,000) lbs.; Loader one hundred twenty thousand (120,000) lbs. and above; Remote Controlled Earth Moving Equipment; Shovel, Dragline, Clamshell, five (5) cu. Yds. And over; Underwater Equipment remote or otherwise, when used in construction work; Wheel Excavator any size

Group 3 Bulldozer, over seventy thousand (70,000) lbs. up to and including one hundred twenty thousand (120,000) lbs.;

Crane, Boom Truck fifty (50) ton and over with less than one hundred fifty foot (150') boom; Crane, fifty (50) ton through eighty nine (89) ton with one hundred fifty foot (150') boom or less (including jib inserts and/or attachments); Crane, Shovel, Dragline or Clamshell three

(3) cu. yds. but less than five (5) cu. Yds.; Excavator over eighty thousand (80,000) lbs. through one hundred thirty thousand (130,000) lbs.; Loader sixty thousand (60,000) lbs. and less than one hundred twenty thousand (120,000) lbs.

Group 4

Asphalt, Screed; Asphalt Paver; Asphalt Roto-Mill, pavement profiler, under eight foot (8') lateral cut; Asphalt, Material Transfer Vehicle Operator; Back Filling Machine;

Backhoe, Robotic, track and wheel type up to and including twenty thousand (20,000) lbs. with any attachments; Blade (any type); Boatman; Boring Machine; Bulldozer over twenty thousand (20,000) lbs. and more than one hundred (100) horse up to seventy thousand (70,000) lbs.; Cable-Plow (any type); Cableway up to twenty five (25) ton; Cat Drill (John

D - 8

Area Revised by Amendment A001

Henry); Chippers; Compactor, multi-engine; Compactor, Robotic; Compactor with blade self-propelled; Concrete, Breaker; Concrete, Grout Plant; Concrete, Mixer Mobile;

Concrete, Paving Road Mixer; Concrete, Reinforced Tank Banding Machine; Crane, Boom Truck twenty (20) ton and under fifty (50) ton; Crane, Bridge Locomotive, Gantry and Overhead; Crane, Carry Deck; Crane, Chicago Boom and similar types; Crane, Derrick Operator, under one hundred

(100) ton; Crane, Floating Clamshell, Dragline, etc.

Operator, under three (3) cu. yds. Or less than thirty (30) ton; Crane, under fifty (50) ton; Crane, Quick Tower under one hundred foot (100') in height and less than one hundred fifty foot (150') jib (on rail included); Diesel-Electric Engineer (Plant or Floating); Directional Drill over twenty thousand (20,000) lbs. pullback; Drill Cat Operator; Drill Doctor and/or Bit Grinder; Driller, Percussion, Diamond, Core, Cable, Rotary and similar type; Excavator Operator over twenty thousand (20,000) lbs. through eighty thousand (80,000) lbs.; Generator Operator; Grade-all; Guardrail Machines, i.e. punch, auger, etc.; Hammer Operator (Piledriver); Hoist, stiff leg, guy derrick or similar type, fifty (50) ton and over; Hoist, two (2) drums or more; Hydro Axe (loader mounted or similar type); Jack Operator, Elevating Barges, Barge Operator, self-unloading;

Loader Operator, front end and overhead, twenty five thousand (25,000) lbs. and less than sixty thousand (60,000) lbs.; Log Skidders; Piledriver Operator (not crane type); Pipe, Bending, Cleaning, Doping and Wrapping Machines; Rail, Ballast Tamper Multi-Purpose; Rubber-tired Dozers and Pushers; Scraper, all types; Side-Boom; Skip Loader, Drag Box; Strump Grinder (loader mounted or similar type); Surface Heater and Planer; Tractor, rubber-tired, over fifty (50) HP Flywheel; Trenching Machine three foot (3') depth and deeper; Tub Grinder (used for wood debris);

Tunnel Boring Machine Mechanic; Tunnel, Mucking Machine;

Ultra High Pressure Water Jet Cutting Tool System Operator;

Vacuum Blasting Machine Operator; Water pulls, Water wagons

Group 5

Asphalt, Extrusion Machine; Asphalt, Roller (any asphalt mix); Asphalt, Roto-Mill pavement profiler ground man;

Bulldozer, twenty thousand (20,000) lbs. or less, or one hundred (100) horse or less; Cement Pump; Chip Spreading Machine; Churn Drill and Earth Boring Machine; Compactor, self-propelled without blade; Compressor, (any power) one thousand two hundred fifty (1,250) cu. ft. and over, total capacity; Concrete, Batch Plant Quality control; Concrete, Combination Mixer and compressor operator, gunite work;

Concrete, Curb Machine, Mechanical Berm, Curb and/or Curb and Gutter; Concrete, Finishing Machine; Concrete, Grouting Machine; Concrete, Internal Full Slab Vibrator Operator;

Concrete, Joint Machine; Concrete, Mixer single drum, any capacity; Concrete, Paving Machine eight foot (8') or less;

Concrete, Planer; Concrete, Pump; Concrete, Pump Truck;

Concrete, Pumpcrete Operator (any type); Concrete, Slip

D - 9

Area Revised by Amendment A001

Form Pumps, power driven hydraulic lifting device for concrete forms; Conveyored Material Hauler; Crane, Boom Truck under twenty (20) tons; Crane, Boom Type lifting device, five (5) ton capacity or less; Drill, Directional type less than twenty thousand (20,000) lbs. pullback; Fork Lift, over ten (10) ton or Robotic; Helicopter Hoist; Hoist Operator, single drum; Hydraulic Backhoe track type up to and including twenty thousand (20,000) lbs.; Hydraulic Backhoe wheel type (any make); Laser Screed; Loaders, rubber-tired type, less than twenty five thousand (25,000) lbs.; Pavement Grinder and/or Grooving Machine (riding type); Pipe, cast in place Pipe Laying Machine; Pulva-Mixer or similar types; Pump Operator, more than five (5) pumps (any size); Rail, Ballast Compactor, Regulator, or Tamper machines; Service Oiler (Greaser); Sweeper Self-Propelled;

Tractor, Rubber-Tired, fifty (50) HP flywheel and under;

Trenching Machine Operator, maximum digging capacity three foot (3') depth; Tunnel, Locomotive, Dinkey; Tunnel, Power Jumbo setting slip forms, etc.

Group 6

Asphalt, Pugmill (any type); Asphalt, Raker; Asphalt, Truck Mounted Asphalt Spreader, with Screed; Auger Oiler;

Boatman; Bobcat, skid steed (less than one (1) yard);

Broom, self-propelled; Compressor Operator (any power) under 1,250 cu. ft. total capacity; Concrete Curing Machine (riding type); Concrete Saw; Conveyor Operator or Assistant; Crane, Tugger; Crusher Feederman; Crusher Oiler;

Deckhand; Drill, Directional Locator; Fork Lift; Grade Checker; Guardrail Punch Oiler; Hydrographic Seeder Machine, straw, pulp or seed; Hydrostatic Pump Operator;

Mixer Box (CTB, dry batch, etc.); Oiler; Plant Oiler; Pump (any power); Rail, Brakeman, Switchman, Motorman; Rail, Tamping Machine, mechanical, self-propelled; Rigger; Roller grading (not asphalt); Truck, Crane Oiler-Driver

IRON0029-004 05/01/2018

Rates Fringes

IRONWORKER.......................$ 37.00 27.87

LABO0737-001 06/01/2018

Rates Fringes

Mason Tender/Hod Carrier Tenders to Bricklayers, Tile Setters, Marble Setters and Terrazzo Workers, Topping for Cement Finishers and Mortar Mixers...............$ 29.70 13.82

D - 10

Area Revised by Amendment A001

LABO0737-008 06/01/2018

ZONE 1:

LABORERS (SEE FOOTNOTE C)

Rates Fringes

Laborers:

GROUP 1.....................$ 29.70 13.82

GROUP 2.....................$ 30.81 13.82

GROUP 3.....................$ 25.77 13.82

Zone Differential (Add to Zone 1 rates):

Zone 2 - $0.85 Zone 3 - 2.00 Zone 4 - 3.00 Zone 5 - 5.00

ZONE 1 - All jobs or projects located within 30 miles of the respective City Hall

ZONE 2 - More than 30 miles and less than 40 miles from the respective City Hall

ZONE 3 - More than 40 miles and less than 50 miles from the respective City Hall

ZONE 4 - More than 50 miles and less than 80 miles from the respective City Hall

ZONE 5 - More than 80 miles from the respective City Hall.

BASEPOINTS:

ALBANY ASTORIA BAKER CITY

BEND BURNS COOS BAY

EUGENE GRANTS PASS HERMISTON

KLAMATH FALLS MEDFORD PENDLETON

PORTLAND ROSEBURG SALEM

THE DALLES

LABORER CLASSIFICATIONS

GROUP 1: Applicator (including Pot Tender for same) applying protective material by hand or nozzle on utility lines or storage tanks on project, Asphalt Plant; Asphalt Spreader;

Batch Weighman; Broomers; Brush Burners and Cutters; Choker Setter; Choker Splicer; Clary Power Spreader; Clean-up Laborer; Clean up Nozzleman (concrete, rock, etc);

Concrete Laborer; Crusher Feeder; Curing, Concrete;

Demolition, wrecking, and moving; Dopping and Wrapping Pipe; Dumpman (for Grading Crew); Erosion Control Specialist; Fine Graders; Fence Builders; Form Strippers;

Guard Rail, Median Rail, Barriers, Reference Post, Guide Post, Right of Way Marker; Remote Control (Dry Pack Machine, Jackhammer, Chipping Guns, Compaction, Paving

D - 11

Area Revised by Amendment A001

Breakers, Hand Held Concrete Saw, Demo Saw, Core Drill);

Precast Concrete Setter; Pressure Washer; Railroad Track Laborer; Ribbon Setter; Rip Rap Map; Sand Blasting (Wet);

Scaffold Tender; Self Propelled Concrete Buggy; Sewer Laborer; Sign Erector; Signalman; Scissor and Manlift;

Skipman; Slopers; Sprayman; Stake Chaser; Stake Setter;

Tamper; Timber Faller and Bucker; Tool Operators (Hand Held, Walk Behind)

GROUP 2: Asbestos Removal; Asphalt Rakers, Bit Grinder, Concrete Core Drill, Concrete Pump Nozzleman, Concrete Saw Operator (Walk Behind, Walk Saw, Rail Mounted, Wire); Drill Operator; Grade Checker; Gunite Nozzleman; Hazardous Waste Laborer; High Scalers; Laser Bean (Pipe Laying); Loop Installation; Manhole Builder; Mold Remediation Laborer;

Nippers and Timberman; Pipelayer; Powderman; Power Saw Operators (Bucking and Falling); Pumpcrete Nozzleman; Sand Blasting (Dry); Sewer Timberman; Tugger Operator;

Vibrators; Water Blaster

GROUP 3: Final Clean-up(detailed clean-up, limited to cleaning up floors, ceilings, walls, windows-prior to acceptance by the owner); Fire Watch; Landscaper; Traffic Flagger

FOOTNOTE C:

HANDLING OF HAZARDOUS WAST MATERIALS - Personnel in all craft classifications subject to working inside a federally designated Hazardous Waste perimeter shall be eligible for compensation in accordance with the following group schedule relative to the level of Hazardous Waste as outline in the specific Hazardous Waste Project Site Safety Plan:

H-1 Base Wage Rate when on a hazardous waste site when not outfitted with protective clothing.

H-2 Class "C" Suit - Basic hourly wage rate plus $1.00 per hour, fringes plus $0.15.

H-3 Class "B" Suit - Basic hourly wage rate plus $1.50 per hour, fringes plus $0.15.

H-4 Class "A" Suit -Basic hourly wage rate plus $2.00 per hour, fringes plus $0.15.

PAIN0055-002 07/01/2018

PAINTER

D - 12

Area Revised by Amendment A001

HIGHWAY & PARKING LOT

STRIPER.....................$ 35.02 12.06

PAIN0055-033 07/01/2018

Rates Fringes

PAINTER

BAKER, BENTON, CLATSOP,

CROOK, DESCHUTES, GRANT,

GILLIAM, HARNEY,

JEFFERSON, LAKE, LANE,

LINN, LINCOLN, MALHEUR,

MARION, POLK, TILLAMOOK,

SHERMAN, UNION, WHEELER

AND YAMHILL COUNTIES

High work-All work 60 feet or higher.............$ 24.26 11.94 Painters...................$ 22.47 10.10

BENTON, LANE, LINN,

JEFFERSON, WHEELER, CROOK,

DESCHUTES, BAKER, MALHEUR,

GRANT, LAKE, LINCOLN,

HARNEY,CLATSOP, GILLIAM,

MARION, POLK, TILLAMOOK,

SHERMAN, UNION, AND

YAMHILL COUNTIES

Painters...................$ 22.51 11.94

CLACKAMAS, COLUMBIA, HOOD

RIVER, MULTNOMAH, MORROW,

UMATILLA, WALLOWA, WASCO

AND WASHINTON COUNTIES

High work-All work 60 feet or higher.............$ 25.46 11.94 Painters...................$ 24.26 11.94

JACKSON AND KLAMATH

COUNTIES

High Work-All Work 60 feet or higher.............$ 22.46 11.94 Painters...................$ 20.51 11.94

PLAS0555-001 06/01/2018

ZONE 1:

Rates Fringes

Cement Masons: (ZONE 1)

CEMENT MASONS DOING BOTH

COMPOSITION/POWER

MACHINERY AND

SUSPENDED/HANGING SCAFFOLD..$ 36.33 18.17

CEMENT MASONS ON

SUSPENDED, SWINGING AND/OR

HANGING SCAFFOLD............$ 35.63 18.17

CEMENT MASONS...............$ 34.93 18.17

D - 13

Area Revised by Amendment A001

COMPOSITION WORKERS AND

POWER MACHINERY OPERATORS...$ 32.19 17.62

Zone Differential (Add To Zone 1 Rates):

Zone 2 - $0.65 Zone 3 - 1.15 Zone 4 - 1.70 Zone 5 - 3.00

BASE POINTS: BEND, CORVALLIS, EUGENE, MEDFORD, PORTLAND,

SALEM, THE DALLES, VANCOUVER

ZONE 1: Projects within 30 miles of the respective city hall

ZONE 2: More than 30 miles but less than 40 miles from the respective city hall.

ZONE 3: More than 40 miles but less than 50 miles from the respective city hall.

ZONE 4: More than 50 miles but less than 80 miles from the respective city hall.

ZONE 5: More than 80 miles from the respective city hall

TEAM0037-004 06/01/2018

ZONE 1:

TRUCK DRIVERS (See Footnote C):

Rates Fringes

Truck drivers:

GROUP 1.....................$ 28.52 14.62

GROUP 2.....................$ 28.64 14.62

GROUP 3.....................$ 28.78 14.62

GROUP 4.....................$ 29.05 14.62

GROUP 5.....................$ 29.27 14.62

GROUP 6.....................$ 29.45 14.62

GROUP 7.....................$ 29.65 14.62

Zone Differential (add to Zone 1 rates):

Zone 2 - $0.65 Zone 3 - 1.15 Zone 4 - 1.70 Zone 5 - 2.75

Zone 1 - All jobs or projects located within 30 miles of the respective City Hall

Zone 2 - More than 30 miles and less than 40 miles from the respective City Hall

Zone 3 - More than 40 miles and less than 50 miles from the

D - 14

Area Revised by Amendment A001 respective City Hall

Zone 4 - More than 50 miles and less than 80 miles from the respective City Hall

Zone 5 - More than 80 miles from the respective City Hall

BASEPOINTS:

ALBANY ASTORIA BAKER

BEND BINGEN BROOKINGS

BURNS COOS BAY CORVALLIS

EUGENE GOLDENDALE GRANTS PASS

HERMISTON HOOD RIVER KLAMATH FALLS

LAGRANDE LAKEVIEW LONGVIEW

MADRAS MEDFORD MCMINNVILLE

OREGON CITY NEWPORT ONTARIO

PENDLETON PORTLAND PORT ORFORD

REEDSPORT ROSEBURG SALEM

THE DALLES TILLAMOOK VANCOUVER

TRUCK DRIVER CLASSIFICATIONS

GROUP 1: A-frame or hydra-lift truck w/load bearing surface;

Articulated dump truck; Battery rebuilders; Bus or manhaul driver; Concrete buggies (power operated); Concrete pump truck; Dump trucks, side, end and bottom dumps, including semi-trucks and trains or combinations thereof: up to and including 10 cu. yds.; Lift jitneys, fork lifts (all sizes in loading, unloading and transporting material on job site); Loader and/or leverman on concrete dry batch plant (manually operated); Lubrication man, fuel truck driver, tireman, wash rack, steam cleaner or combination; Pilot car; Pickup truck; Slurry truck driver or leverman; Solo flat bed and misc. body truck, 0-10 tons; Team drivers;

Tireman; Transit mix and wet or dry mix trucks: 5 cu yds.

and under; Water wagons (rated capacity) up to 3,000 gallons

GROUP 2: Boom truck/hydra-lift or retracting crane;

Challenger; Dumpsters or similar equipment-all sizes; Dump trucks/articulated dumps 6 cu to 10 cu.; Flaherty spreader driver or leverman; Low bed equipment, flat bed semi-truck and trailer or doubles transporting equipment or wet or dry materials; Lumber carrier, driver-straddle carrier (used in loading, unloading and transporting of materials on job site); Oil distributor driver or leverman; Transit mix and wet or dry mix trucks: over 5 cy yds and including 7 cu.

yds; Vacuum trucks; Water Wagons (rated capacity) over 3,000 to 5,000 gallons

GROUP 3: Ammonia nitrate distributor driver; Dump trucks, side, end and bottom dumps, including semi-trucks and trains or combinations thereof: over 10 cu. yds. and including 30 cu. yds., includes articulated dump trucks;

Self-Propelled street sweeper; Transit mix and wet or dry mix trucks, over 7 cu. yds. and including 11 cu. yds.;

truck mechanic-Welder-Body repairman; Utility and clean-up

D - 15

Area Revised by Amendment A001 truck; Water wagons (rated capacity) 5,000 to 10,000 gallons.

GROUP 4: Asphalt Bruner; Dump trucks, side, end and bottom dumps, including semi-trucks and trains or combinations thereof: over 30 cu. yds. and including 50 cu. yds.

includes articulated dump trucks; Fire guard; Transit Mix and Wet or Dry Mix Trucks, over 11 cu. yds. and including 15 cu. yds.; Water Wagon (rated capacity) over 10,000 gallons to 15,000 gallons

GROUP 5: Composite Crewman; Dump trucks, side, end and bottom dumps, including semi-trucks and trains or combinations thereof: over 50 cu. yds. and including 60 cu. yds., includes articulated dump trucks

GROUP 6: Bulk cement spreader w/o auger; Dry Pre-Batch concrete mix trucks; Dump trucks, side, end and bottom dumps, including semi-trucks and trains of combinations thereof: over 60 cu. yds. and including 80 cu. yds. and includes articulated dump trucks; Skid truck

GROUP 7: Dump trucks, side, end and bottom dumps, including semi-trucks and trains or combinations thereof: over 80

cu. yds. and including 100 cu. yds. includes articulated dump trucks; Industrial lift truck (mechanical tailgate)

FOOTNOTE C:

HANDLING OF HAZARDOUS WAST MATERIALS -(LABORERS, POWER

EQUIPMENT OPERATORS, AND TRUCK DRIVERS): Personnel in all craft classifications subject to working inside a federally designated Hazardous Waste perimeter shall be eligible for compensation in accordance with the following group schedule relative to the level of Hazardous Waste as outline in the specific Hazardous Waste Project Site Safety Plan:

H-1 Base Wage Rate when on a hazardous waste site when not outfitted with protective clothing.

H-2 Class "C" Suit - Basic hourly wage rate plus $1.00 per hour, fringes plus $0.15.

H-3 Class "B" Suit - Basic hourly wage rate plus $1.50 per hour, fringes plus $0.15.

H-4 Class "A" Suit -Basic hourly wage rate plus $2.00 per hour, fringes plus $0.15.

SUOR1991-003 04/01/1991

Timber Sales Roads:

D - 16

Area Revised by Amendment A001

LABORERS....................$ 8.35 4.30

OPERATING ENGINEERS.........$ 10.37 4.15

POWER SAW, DRILLER,

POWDERMAN...................$ 9.12 4.30

TEAMSTERS...................$ 9.74 3.74

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or "UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this

D - 17

Area Revised by Amendment A001 classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate…