Amendment 0008 SF30 and change pages.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

5. PROJECT NO. (If applicable)2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ.NO.

PAGE OF PAGES

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6)

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE

9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

Items 8 and 15, and returning is extended, is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required.)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

(x) A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO THE AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation date, etc.) SET FORTH IN ITEM 14.

E. IMPORTANT: Contractor is not, is required to sign this document and return

ORDER NO. IN ITEM 10A.

1 2

0008 01/05/2018

FAA AWA

800 Independence Avenue, S.W.

Washington DC 20591

AWA

x

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

separate letter or telegram which includes a reference to the solicitation and amendment number. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT

THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By ___________ x x

DTFAWA-17-R-00049

copies to the issuing office.

01/05/2018

(x)

A. The purpose of this amendment is to correct and revise the solicitation sections and attachments as summarized below and to notify Offerors that they may submit additional questions to the Contracting Officer at amy.wright@faa.gov by 5:00 pm July 6, 2018.

B. Section C.2.1, SITE CONFIGURATIONS, and C.3.2, PHASE 1 SITE SURVEY AND DESIGN, are amended to identify FAA Order 1600.69C. Section C.9.5.6, ACCESS CONTROL UNIT (ACU), is amended to identify SP 800-73-4.

C. The milestone table in Section L.2, INFORMATION AND CONSIDERATIONS AFFECTING VENDOR

PROPOSAL SUBMISSIONS, is amended to indicate that Volume 1, Section 8, Subcontracting Plan, is due October 15, 2018. The table in Section L.4, INSTRUCTIONS FOR PREPARATION AND

Continued ...

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. CONTRACT AUTHORITY 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Amy K. Wright

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 2

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

DTFAWA-17-R-00049/0008

SUBMISSION OF PROPOSALS, is amended to correct the referenced paragraph to Section H, SUBCONTRACTING PLAN – CONTRACTOR SMALL BUSINESS

SUBCONTRACTING PLAN, and to indicate the due date for Volume 1, Section 8. Section L.7, TIME, DATE, PLACE, AND SUBMISSION OF PROPOSALS, is amended to indicate the revised due date for Volume 1, Section 8.

D. Section L.6.2.2, VOLUME 3, PART B, SECTION 2 –

SAMPLE TASKS, is amended to indicate that the

Detailed Milestone Schedule is to be submitted with J-8, Task Order Work Plan, in contractor’s format.

E. Attachment J-03, List of Applicable Documents, is amended to indicate the correct version number for NIST SP-800-73-4, Interfaces for Personal

Identity Verification (4 Parts).

F. Attachment J-08, Task Order Work-Plan

Template, is replaced in its entirety.

G. Attachment J-11, Contractor Acceptance

Inspection (CAI) Template is amended to indicate a 45 day warranty period and to change the FAA signature block on the CAI Inspection Form.

H. Attachment J-19, SSDI Sample Tasks, is amended to add FSL-1 Sample Task Drawings, and to correct the door types listed in the FSL-3 Sample Task.

I. Attachment J-24, Past Experience and

Performance History Form, is amended to correct the reference in subparagraph (F) to Section M.6.

Change pages for Section C and Section L are attached. Changes to the Attachments are posted with this amendment in separate files.

Period of Performance: 12/11/2018 to 12/10/2028

Amendment 0008

DTFAWA-17-R-00049

SECTION C

STATEMENT OF WORK

Page C-5 This document/record belongs to the Federal Aviation Administration and may be used for official Government purposes only. It may not be released without the expressed permission of the Federal Aviation Administration. Refer requests for the document to: Facility Security Services, AJW-246, 800 Independence Avenue, SW, Building: FOB-10A, Room 7W560 Washington, DC 20591.

FOR OFFICIAL USE ONLY

Public availability to be determined under 5 US C 552 space. Security requirements vary based on the FSL and the potential for threats to the facility.

Actual requirements for each facility are identified by the latest version of FAA Order 1600.69C, FAA Facility Security Management Program. Tables 4-1-1, 4-2-1, and 4-3-1 from this order provide a summary of these requirements, and are included in Attachment J-15, Excerpt from FAA Order 1600.69C. Security findings identified by the FAA Office of Internal Security during a facility assessment will be addressed by the Contractor in the Task Order work.

While actual PACS may vary from site to site, the final product must be capable of integrating into the PSEMS subsystems. Ultimately all FSL-2 facilities must be centrally controlled and monitored via standardized open communications protocols over an Internet Protocol (IP) network. The site-specific designs must be developed without compromising this capability.

C.2.2 FACILITY SECURITY LEVELS (FSL)

The following sections provide an overview of the approximate number of facilities and types of security upgrades that may be required for each facility security level.

A. Facility Security Level-1 (FSL-1) Facilities:

Approximately 500+ sites. Security upgrades required at FSL-1 facilities include cipher locks on gates. Card readers are not required at these facilities and these facilities are not connected to the PSEMS. Additional work (e.g., upgrades, replacements, and/or modifications) may be required at previously completed sites.

B. Facility Security Level-2 (FSL-2) Facilities:

Approximately 500+ sites. Typically, FSL-2 facilities require electronic access control, a video intercom unit, and a remote main entrance door release. Approximately 20 percent of these facilities may have requirements for other PACS components. The FSL-2 facilities must be capable of integrating into the larger PSEMS. Additional work (e.g., card reader replacements, additional card readers, and camera upgrades) may be required at previously completed sites.

C. Facility Security Level -3 and Facility Security Level-4 (FSL-3 and FSL-4) Facilities:

Approximately 87 sites. FSL-3 and FSL-4 facilities range in size from a large building with one or two outbuildings to a campus with up to 200-plus buildings. These facilities require automated access control capability, remote visual assessment and surveillance capabilities to include interior and exterior areas, and intrusion detection capability. Additional requirements

SECTION C

STATEMENT OF WORK

Page C-9 This document/record belongs to the Federal Aviation Administration and may be used for official Government purposes only. It may not be released without the expressed permission of the Federal Aviation Administration. Refer requests for the document to: Facility Security Services, AJW-246, 800 Independence Avenue, SW, Building: FOB-10A, Room 7W560 Washington, DC 20591.

FOR OFFICIAL USE ONLY

Public availability to be determined under 5 US C 552 deliverables (e.g., the warranty, as-built drawings, and Operations and Maintenance (O&M) Manuals).

C.3.1.1 WORK-PLAN REQUEST

Prior to issuing a Task Order for Phase 1 Design actions at a facility or facilities, the Government will issue a Phase 1 Site Survey Task Order and a Work-Plan request. The Work-Plan (CDRL A006) must be submitted within 15 calendar days of the request and must contain the labor categories, labor hours, costs to complete the work, and any other relevant information required.

The Contractor must also submit a draft schedule (CDRL A003) with the Work-Plan. The Government will review the documents and, based on the information submitted and any discussions held with the Contractor, may submit a Task order to complete the work.

CDRL A003 INTEGRATED PROJECT SCHEDULE

CDRL A006 WORK-PLAN

C.3.2 PHASE 1: SITE SURVEY AND DESIGN

The FAA’s Office of Internal Security has assessed the security needs for each facility. Prior to the site survey, the Contractor will be provided information regarding the assessment’s findings.

During the site survey and design phase, the Contractor must work with FAA personnel to develop the most cost-effective solution to mitigate the assessment’s findings. The most recent iteration of FAA Order 1600.69C provides guidance for addressing open security findings.

C.3.2.1 SITE SURVEY

The Contractor must conduct site surveys with the CO, COR, or FAA representative as designated in the Task Order. The site survey will ascertain the existing conditions and address any new FAA security requirements in preparation for the execution of a Phase 2 Task Order.

The Contractor must provide the following deliverables:

A. SCHEDULE: No later than 15 calendar days after receipt of the Phase 1 Site Survey Task Order, the Contractor must provide a project schedule, per CDRL A007, for all activities associated with the Phase 1 Task Order.

B. SITE SURVEY REPORT (SSR): At the conclusion of the site survey, and no later than 30 calendar days (15 calendar days for FSL-1 and FSL-2 facilities) after completion of the site survey, per CDRL A014, the Contractor must submit a SSR for approval by the CO. The FAA will have 30 days to review and approve the Site Survey Report. The SSR

SECTION C

STATEMENT OF WORK

Page C-74 This document/record belongs to the Federal Aviation Administration and may be used for official Government purposes only. It may not be released without the expressed permission of the Federal Aviation Administration. Refer requests for the document to: Facility Security Services, AJW-246, 800 Independence Avenue, SW, Building: FOB-10A, Room 7W560 Washington, DC 20591.

FOR OFFICIAL USE ONLY

Public availability to be determined under 5 US C 552

C.9.5.6 ACCESS CONTROL UNIT (ACU)

The ACU must be microprocessor-based with all access and I/O decisions to be made by the individual/local ACUs. The ACU must be of a modular design which must allow for present security requirements as well as the capability to expand. All field ACU panels must be configured to intercommunicate via RS-422/485 or RS-232 hardwired, dial-up, transmission control protocol (TCP)/IP or fiber-optic communication. All field ACUs must be equipped with a tamper contact. Initially or under a Government-controlled implementation schedule, each facility-level subsystem must be capable of communicating with a remote, central management, and monitoring workstation.

Each ACU must have or be capable of, but not limited to, the following functions:

A. Built-in surge suppression circuitry on plug-in modular circuit boards. The surge protection, designed as an integral component of the system, must be self-sacrificing in the event of extreme surges or spikes;

B. Supporting at least two ports and be expandable by increments of two up to a minimum of 16 ports per ACU;

C. Configuration by the AACS to support any one of the following peripheral devices: Card Reader, Alarm Monitoring Module, Output Relay Module, Elevator Reader, or Elevator Output Module. Any combination of these devices can be supported on each ACU, with up to a total of 16 devices per ACU;

D. Supporting the Card Holder Unique Identifier (CHUID), as defined in the latest NIST FIPS 201 and SP 800-73-4. Select portals or subsystems may be required to process the Card Authentication Key (CAK), as noted in the latest version of FIPS-201 and its supporting standards;

E. Built-in battery back-up of programmed information and must be sustainable for a period of not less than ninety days;

F. Being powered by a field selectable 12 or 24 VDC power source rated at a minimum of two amperes. The power supply must have a battery back-up for complete system operation in the event of power failure. The Contractor must provide enough battery backup for all ACUs to sufficiently power the ACU for four hours of continuous service;

G. A separate power supply for electric strikes, other locking devices, and ancillary peripherals. In the event of power failure, battery back-up must be utilized and provide continued operation for four hours;

H. A minimum buffer of 20,000 event logs per ACU. The log buffer must be used to record and hold access and alarm activity information until the AACS is connected and receives the information. There must be a software-configurable warning notification of log buffer filling for ACUs configured with internet connection capability.

SECTION L

INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

Page L-2

(b) The procurement process will involve the evaluation of the technical and price proposals.

Evaluations involved will permit the FAA to select an offer that is the best value to the FAA.

(c) The FAA may communicate with one or more Offerors at any time during the SIR process.

Communications with one Offeror do not necessitate communications with other Offerors since communications will be Offeror-specific. Information determined to have common application and not considered prejudicial or proprietary to any Offeror will be communicated to all Offerors.

(d) This document constitutes a formal SIR for which an award may be made without further discussions or negotiations. Offerors are to consider all terms and conditions contained in the formal SIR in preparation of their proposals.

(e) Following is the projected schedule for this SIR:

Milestone

Date SIR Release 01/05/2018 Questions Due from Industry 01/12/2018 FAACO Updated with Responses to Questions 04/13/2018 and future amendment

VOL.1 (Sections 1 through 7) and, VOL.3 (Management, Technical, and Past Performance) due

08/01/2018

VOL.1 Section 8 Subcontracting Plan 10/15/2018

VOL.2 Pricing due 10/15/2018

Contract Award Est.

12/2018

L.3 QUALIFICATIONS

L.3.1 OFFEROR QUALIFICATIONS

The Offeror (Company represented by SF-33, Solicitation, Offer, and Award signatory) must meet the minimum corporate experience requirements; these requirements are not minor and will not be waived. The Offeror must have seven (7) consecutive years of corporate experience with complex security projects as of January 1, 2018 that required the design, integration, installation and maintenance of the major security subsystems and components contained in the SSDI II SOW. The experience must be on projects similar to the size, scope, and complexity of the SSDI II contract. The major security subsystems and equipment are: Security Surveillance System, Access Control Systems, Intrusion Detection System, and Intercom Systems.

A. The Offeror must also have seven (7) consecutive years of corporate experience as of January 1, 2018 integrating multiple facilities into a national or regional enterprise system similar to the requirements in Section C.11, Physical Security Enterprise Management System. The experience must be on projects similar to the size, scope, and complexity of the SSDI II contract.

Page L-4

• 1 original proposal Volume 2 using a 3-ring binder

• 1 original proposal Volume 3 using a 3-ring binder

• 1 spiral-bound or comb-bound copy of Volume 1

• 1 spiral-bound or comb-bound copy of Volume 2

• 5 spiral-bound or comb-bound copies of Volume 3

(c) Note: Include the USB flash drive in the original of each volume. The Offeror's proposal submission shall be organized as follows:

VOLUME TITLE PAGE

LIMIT

VOL 1 OFFER AND OTHER DOCUMENTS N/A

Section 1 Solicitation Cover Page (and amendments if applicable) -signed by authorized representative of company

Section 2 SIR Section I - filled in completely Section 3 SIR Section K - filled in completely and signed Section 4 Reserved.

Section 5 Responsible Prospective Contractors Section 6 Organizational Conflict of Interest Mitigation Plan (if applicable) Section 7 Minimum Eligibility Experience Qualification data and L.3.1 and

L.3.2 data submission (Table 1: Corporate Experience)

Section 8 Section H.13, Subcontracting Plan – Contractor Small Business Subcontracting Plan (Due with Volume 2 Pricing on 10/15/2018)

VOL 2 PRICING N/A

Section 1 As described in Section L.5.2.

Section 2 Pricing Methodology (narrative in Offeror’s format)

VOL 3 MANAGEMENT, TECHNICAL, AND PAST

PERFORMANCE

45 pages

Part A Management Proposal Section 1 Resources

Section 2 Proposed Organization Section 3 Key Personnel Part B Technical Proposal Section 1 Technical Questions

Section 2 Sample Tasks (Not included in page count)

Section 3 Equipment List Section 3a Equipment List (J-16 with no prices) – including Manufacturers

Product Information Sheets (cut sheets) (Not included in page count).

Section 3b Equipment List Questions Part C Past Technical Performance

Section 1 Relevant Experience and Past Performance (Attachments J-17, J-

24. Attachments J-24 for the Prime Contractor count against the 45 page limit. Subcontractor J-24s do not count. No J-17s count.)

(Subcontractor J-24s are Not included in page count).

Page L-13 are subsystems of the Physical Security Enterprise Management System (PSEMS) (see Section C.11 Physical Security Enterprise Management System).

3) To save costs and facilitate enterprise level monitoring, facility security level 2 facilities will share centralized remote servers located at an FAA Data Center while allowing individual facilities to manage their facility access.

a. Explain how the Offeror’s solution for facility monitoring using shared centralized servers will be implemented.

b. Explain how, with the Offeror’s proposed solution, the facility will retain the ability to manage security alarms and control access locally.

4) What is your approach to meet warranty requirements, including service response times?

5) At the completion of the warranty period, maintenance of the security equipment will be moved to the Corrective Maintenance Contract (CMC) or turned over to the FAA for maintenance. How will the Offeror work with the FAA to ensure a smooth transition of technical data necessary for future maintenance support to the FAA? How will the Offeror transition technical data to the CMC for future maintenance support?

L.6.2.2 VOLUME 3, PART B, SECTION 2 - SAMPLE TASKS

Using the requirements of Section C and the design guidance documents contained in Section J, Attachment J-19, SSDI II Sample Tasks, the Offeror will produce technical refresh Work-Plans for a Small [Facility Security Level 1 (FSL-1)], Medium [Facility Security Level 2 (FSL-2)], Large [Facility Security Level 3 (FSL-3)], and one (1) Work-Plan for a Physical Security Enterprise Management System (PSEMS) upgrade of the security equipment installed at the generic facilities provided in Attachment J-19, including assumptions.

The Offeror must assume the facilities are a Western Service Area facility with applicable Facility Security Level requirements to prepare each Sample Task.

1) Work-Plan Tasks: Offerors must provide a design package for each Work-Plan using the provided drawings. Detail of work for each Work-Plan including assumptions labor hours, equipment, etc. will be entered into the Section J, Attachment J-08, Task Order / Work-Plan Template. The design package must include:

A. A Proposal for Phase 1, Site Survey (Firm Fixed-Price) and Design (Time & Materials)– The proposal must include:

• Labor categories (limited to labor categories in Attachment J-4, Labor Category

Definitions)

• Hours per labor category (hours only no cost information)

• Description of work to be performed

• Detailed Milestone Schedule (Submitted with J-8 Task Order Work-Plan in contractor’s format) B. A Firm Fixed-Price (FFP) Proposal for Phase 2, Implementation – The proposal must include:

• Labor categories (limited to labor categories in Attachment J-4, Labor Category

Definitions)

Page L-14

• Hours per labor category (hours only no cost information)

• Description of work to be performed

• List of equipment (as identified by the Offeror in Section J, Attachment J-16, Equipment List, including quantities) (no cost information)

• Design drawings (PSEMS sample task only)

• Detailed Milestone Schedule

C. A completed Section J, Attachment J-08, Task Order / Work-Plan Template for each task. A maximum of two (2) Supplemental pages to J-08 are allowed. .

Assumptions made by the Offeror must be identified and provided with the sample task package for evaluation.

L.6.2.3 VOLUME 3, PART B, SECTION 3 – EQUIPMENT LIST

The Offeror must provide the Equipment List information with no price information as requested in L.6.2.3.1 and L.6.2.3.2 below.

L.6.2.3.1 VOLUME 3, PART B, SECTION 3a – EQUIPMENT LIST The Offeror must provide a complete, Equipment List with Manufacturer’s Product Information (cut sheets) for each of the items proposed by the Offeror. In addition to the Equipment List, the Offeror must provide copies of the GSA FIPS-201-2 approvals (including APL #) for each approved component (PACS Infrastructure, Validation System, and PIV Readers).

L.6.2.3.2 VOLUME 3, PART B, SECTION 3b - EQUIPMENT LIST QUESTIONS

1) Proposed access control components must be listed on the approved APL-2 list at ID

Management: FICAM Product Search. Provide a description of your proposed GSA APL- 2 approved components (PACS Infrastructure, Validation System, and PIV Readers) with APL # and describe how your proposed system meets the requirements of the SOW Section 9.0, Physical Access Control System (PACS), and the current version of FIPS 201.

2) Will an upgrade of the access control components’ software or firmware require re-certification of equipment on the GSA APL-2? If so, how will this impact the program?

L.6.3 VOLUME 3, PART C - PAST TECHNICAL PERFORMANCE

This section consists of information on the Offeror's past performance and experience. Within Part C, Offerors must address their past performance and experience to include their compliance with the FAA minimum requirements:

(1) Proof of the required years of experience as described in L.3.1 and L.3.2

L.6.3.1 VOLUME 3, PART C SECTION 1. – RELEVANT EXPERIENCE AND PAST

PERFORMANCE

(a) The Offeror must demonstrate relevant experience and past performance or affirmatively state that it possesses no relevant experience and past performance. Relevant experience and https://www.idmanagement.gov/IDM/IDMFicamProductSearchPage https://www.idmanagement.gov/IDM/IDMFicamProductSearchPage

Page L-16 of a contractor's managers, key personnel, subcontractors, or other partners offsets the risk of doing business with a prime contractor that has no or limited experience and past performance of its own.

(h) If the government attributes to the successful Offeror the past performance of its proposed managers, key personnel, subcontractors, or other partners, the successful Offeror's proposal will be incorporated into the resultant contract as a requirement. In such cases the subject managers, key personnel, subcontractors, or other partners should not be replaced without prior approval of the Contracting Officer.

L.6.3.2 VOLUME 3, PART C, SECTION 2 - RELATED INFORMATION

Offerors must submit, in their own format, the following information as part of their proposal for both Offeror and proposed major subcontractor with regard to the applicable information that each vendor has that is related to security system design and implementation. This information need not be specifically for security system design and implementation, but may include contracts or events that provide the Government with information related to how the Offeror will perform under the contract resulting from this solicitation.

(a) The Offeror may describe any awards or certifications that indicate the Offeror possesses a high-quality process for providing the services required. Such awards or certifications include, for example, the Malcolm Baldrige Quality Award, other government quality awards, and private sector awards or certifications (e.g., the automobile industry's QS 9000, Sematech's SSQA, or ANSI/EIA-599). Identify what segment of the company (one division or the entire company) received the award or certification. Describe when the award or certification was bestowed. If the award or certification is over three years old, present evidence that the qualifications still apply.

(b) The Offeror's Related Information submission should not exceed two (2) pages for the prime contractor and four (4) pages for subcontractors. The Related Information submission for a single subcontractor shall not exceed two (2) pages. The Related Information submission pages do not count against the 45-page limit for Volume 3. If there is no Related Information, this submission will be rated “Neutral” in accordance with Section M.

L.7 TIME, DATE, PLACE, AND SU LBMISSION OF PROPOSALS

(a) ADDRESS - Proposals must be mailed or hand-delivered to the following address:

ATTN: Amy Wright Federal Aviation Administration Department of Transportation 800 Independence Ave SW, Room 406W Washington, DC 20591 Telephone: 202.267.4425

TIME AND DATE - Proposals must be received by the FAA at the above location no later than 2:00 pm Eastern Time on 08/01/2018 (Volume 1 (Sections 1 through 7) & Volume 3); on 10/15/2018 (Volume 1 (Section 8) & Volume 2). Offerors must request receipts for proposals if one is desired. All Amendments issued, if any, must be signed and submitted with the Offerors proposal.