ATTACHMENT 2 DRAWINGS.pdf

PDF 24 MB Posted Jul 18, 2017

Attached to: CONSTRUCTION: AHQ 2nd Floor Renovation, MMAC Oklahoma City, OK
Solicitation number: DTFAAC-17-R-00159
Issued by: Department of Transportation Federal Aviation Administration Aeronautical Center

About this file

From the source

ATTACHMENT 2 DRAWINGS (pdf)

View the file

Other files

File	Type	Posted
ATTACHMENT 3 CHAPTER 33 CONSTRUCTION SAFETY.pdf	PDF	Jul 18, 2017
ATTACHMENT 8 OPERATIONAL CONTROL DOCS.pdf	PDF	Jul 18, 2017
ATTACHMENT 11 CLIENT AUTHORIZATION LETTER.docx	DOCX document	Jul 18, 2017
ATTACHMENT 7 CONTRACTOR'S RELEASE.doc	DOC document	Jul 18, 2017
ATTACHMENT 6 SF25A.doc	DOC document	Jul 18, 2017
ATTACHMENT 4 WD OK49.pdf	PDF	Jul 18, 2017
AMENDMENT 0002.pdf	PDF	Jul 18, 2017
ATTACHMENT 14 ADDENDUM 3.pdf	PDF	Jul 18, 2017
ATTACHMENT 10 PAST PERFORMANCE SURVEY.pdf	PDF	Jul 18, 2017
ATTACHMENT 9 PAST PERFORMANCE EXPERIENCE INFORMATION FORM.pdf	PDF	Jul 18, 2017
ATTACHMENT 1 SPECIFICATIONS.pdf	PDF	Jul 18, 2017
AMENDMENT 0003.pdf	PDF	Jul 18, 2017
ATTACHMENT 5 SF25.pdf	PDF	Jul 18, 2017
Pre-proposal Conference Sign-in Sheet.pdf	PDF	Jul 18, 2017
AMENDMENT 0001.pdf	PDF	Jul 18, 2017
SIR/RFO DTFAAC-17-R-00159.pdf	PDF	Jul 18, 2017
ATTACHMENT 13 ADDENDUM 2.pdf	PDF	Jul 18, 2017
ATTACHMENT 12 ADDENDUM 1.pdf	PDF	Jul 18, 2017
ATTACHMENT 7 CONTRACTOR'S RELEASE.doc	DOC document	Jul 13, 2017
ATTACHMENT 6 SF25A.doc	DOC document	Jul 13, 2017
ATTACHMENT 12 ADDENDUM 1.pdf	PDF	Jul 13, 2017
AMENDMENT 0002.pdf	PDF	Jul 13, 2017
ATTACHMENT 13 ADDENDUM 2.pdf	PDF	Jul 13, 2017
ATTACHMENT 9 PAST PERFORMANCE EXPERIENCE INFORMATION FORM.pdf	PDF	Jul 13, 2017
ATTACHMENT 1 SPECIFICATIONS.pdf	PDF	Jul 13, 2017
ATTACHMENT 5 SF25.pdf	PDF	Jul 13, 2017
ATTACHMENT 2 DRAWINGS.pdf	PDF	Jul 13, 2017
AMENDMENT 0001.pdf	PDF	Jul 13, 2017
Pre-proposal Conference Sign-in Sheet.pdf	PDF	Jul 13, 2017
ATTACHMENT 8 OPERATIONAL CONTROL DOCS.pdf	PDF	Jul 13, 2017
SIR/RFO DTFAAC-17-R-00159.pdf	PDF	Jul 13, 2017
ATTACHMENT 10 PAST PERFORMANCE SURVEY.pdf	PDF	Jul 13, 2017
ATTACHMENT 11 CLIENT AUTHORIZATION LETTER.docx	DOCX document	Jul 13, 2017
ATTACHMENT 3 CHAPTER 33 CONSTRUCTION SAFETY.pdf	PDF	Jul 13, 2017
ATTACHMENT 4 WD OK49.pdf	PDF	Jul 13, 2017
ATTACHMENT 6 SF25A.doc	DOC document	Jul 13, 2017
SIR/RFO DTFAAC-17-R-00159.pdf	PDF	Jul 13, 2017
ATTACHMENT 11 CLIENT AUTHORIZATION LETTER.docx	DOCX document	Jul 13, 2017
ATTACHMENT 10 PAST PERFORMANCE SURVEY.pdf	PDF	Jul 13, 2017
ATTACHMENT 4 WD OK49.pdf	PDF	Jul 13, 2017
AMENDMENT 0001.pdf	PDF	Jul 13, 2017
ATTACHMENT 1 SPECIFICATIONS.pdf	PDF	Jul 13, 2017
ATTACHMENT 5 SF25.pdf	PDF	Jul 13, 2017
ATTACHMENT 3 CHAPTER 33 CONSTRUCTION SAFETY.pdf	PDF	Jul 13, 2017
ATTACHMENT 9 PAST PERFORMANCE EXPERIENCE INFORMATION FORM.pdf	PDF	Jul 13, 2017
Pre-proposal Conference Sign-in Sheet.pdf	PDF	Jul 13, 2017
ATTACHMENT 7 CONTRACTOR'S RELEASE.doc	DOC document	Jul 13, 2017
ATTACHMENT 8 OPERATIONAL CONTROL DOCS.pdf	PDF	Jul 13, 2017
ATTACHMENT 12 ADDENDUM 1.pdf	PDF	Jul 13, 2017
ATTACHMENT 2 DRAWINGS.pdf	PDF	Jul 13, 2017

Show 40 more

Latest 50 of 88 listed here. See the rest on GovTribe.

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

NOTE:

DO NOT SCALE DRAWINGS. VERIFY ALL DIMENSIONS AND

CLEARANCES FROM ARCHITECTURAL, STRUCTURAL,

SHOP AND OTHER APPROPRIATE DRAWING OR AT SITE.

LAY OUT AND COORDINATE ALL WORK PRIOR TO

INSTALLATION TO PROVIDE CLEARANCES REQUIRED FOR

OPERATION, MAINTENANCE, AND CODES AND VERIFY

NON-INTERFERENCE WITH OTHER WORK. DO NOT

FABRICATE PRIOR TO VERIFICATION OF CLEARANCE FOR

ALL TRADES. READ SPECIFICATIONS.

Permission to reproduce all or part of this drawing is hereby granted solely for the limited purpose of construction of this project or archiving. Unauthorized copying, disclosure or construction use without written permission of Alvine Engineering is prohibited by copyright law.

2016 5730

DATE PRINTED

PROGRESS

03/20/2017

3/20/17

C.A. NO. 842

EXPIRES 30/JUNE/2018

FINTUBE-TYPE (SHADED AREA INDICATES

CAPACITY MBH ELEMENT LOCATION)

VOLUME DAMPER

DESCRIPTIONSYMBOLSYMBOL DESCRIPTION SYMBOL DESCRIPTION

HEATING - VENTILATING - AIR-CONDITIONING

T RS

P T

FT-1

MBH

XØ

X/X

CFM

SIZE TYPE

CFM

SIZE TYPE

FRD

FSD

E N

CO2

CHILLED WATER SUPPLY

CHILLED WATER RETURN

CONDENSATE OR BOILER FEED PUMP DISCHARGE

CONDENSER WATER SUPPLY FROM TOWER

CONDENSER WATER RETURN TO TOWER

COIL OR EQUIPMENT DRAIN

GLYCOL SUPPLY

GLYCOL RETURN

FUEL OIL SUPPLY

FUEL OIL RETURN

FUEL OIL VENT

NATURAL GAS

HEAT PUMP WATER SUPPLY

HEAT PUMP WATER RETURN

HIGH PRESSURE CONDENSATE RETURN

HIGH PRESSURE STEAM

HOT WATER SUPPLY

HOT WATER RETURN

LOW PRESSURE CONDENSATE RETURN

LOW PRESSURE STEAM

MEDIUM PRESSURE CONDENSATE RETURN

MEDIUM PRESSURE STEAM

REFRIGERANT LIQUID

REFRIGERANT SUCTION

REFRIGERANT HOT GAS DISCHARGE

BACK-DRAFT DAMPER (COUNTER BALANCED)B.D.D.

LPS

MPS

HPS

LPR

MPR

HPR

HWS

HWR

CWS

CWR

FOS

FOR

FOV

#/HR

HPWS

HPWR

PIPE IN SLEEVE

VALVE IN VERTICAL PIPE

F AND T TRAP CAP LBS/HR

BUCKET TRAP CAP LBS/HR

AIR QUALITY SENSOR

C02 SENSOR

HUMIDISTAT

REMOTE SENSOR

THERMOSTAT

THERMOSTAT WITH REMOTE SENSOR

AQUASTAT

SOLENOID VALVE (REFRIGERANT)

THERMOSTATIC EXPANSION VALVE (REFRIGERANT)

SIGHT GLASS

MANUAL AIR VENT

PRESSURE OR TEMPERATURE MEASURING POINTS

FLOW SWITCH

HEATING RISER

ACCESS DOOR - SIZE AS SHOWN OR PER SPEC.

EXPANSION LOOP, LENGTH AND DEPTH

NEW TO EXISTING CONNECTION

#/HR

RECTANGULAR DUCTWORK

(FIRST NUMBER IS SIDE SHOWN)X/X

ROUND DUCT

FLAT OVAL (FIRST NUMBER IS THE SIDE SHOWN)

MOTORIZED DAMPER

FIRE DAMPER WITH ACCESS DOOR

COMBINATION FIRE AND SMOKE DAMPER

WITH ACCESS DOOR

SMOKE DAMPER WITH ACCESS DOOR

SOUND ATTENUATOR

FLEX CONNECTION

SUPPLY REGISTER OR GRILLE

RETURN REGISTER OR GRILLE

TYP DIFFUSER NECK SIZE, MARK

CFM

X X X

SUPPLY, OUTDOOR, OR MIXED AIR DUCT

END OR RISER (SA) (OA) (MA)

RETURN EXHAUST OR RELIEF AIR DUCT

END OR RISER (RA) (EA) (RLFA)

TYP EXHAUST/RETURN GRILLE NECK SIZE, MARK

CFM

TURNING VANES

MECHANICAL/ELETRICAL COORDINATION SCHEDULE

MECH EQUIPMENT WITH ELEC CONNECTION SEE

AUTOMATIC CONTROL VALVE, 2-WAY

AUTOMATIC CONTROL VALVE, 3-WAY

PRESSURE REGULATING VALVE (PRV)

X X

POINT OF DISCONNECT

140°

SAN

ORCO CO

GCO

Y.H.

BFP

_ FD-X

_ FS-X

_ RD-X

VTR

EXISTING SANITARY DRAIN (ABOVE FLOOR)

VENT

CLEAN OUT

PLUMBING

EXISTING SANITARY SEWER (BELOW FLOOR)

HOT WATER CIRCULATING 140° GRADE CLEAN OUT

EXISTING STORM DRAIN (ABOVE FLOOR)

OVERFLOW STORM DRAIN (ABOVE FLOOR)

DOUBLE GRADE CLEAN-OUT

EXISTING STORM DRAIN (BELOW FLOOR)

OVERFLOW STORM DRAIN (BELOW FLOOR)

HOSE BIBB

EXISTING SUB SOIL DRAIN

SANITARY DRAIN (ABOVE FLOOR)

WALL HYDRANT (NON-FREEZE TYPE)

EXISTING ACID WASTE (ABOVE FLOOR)

SANITARY SEWER (BELOW FLOOR)

YARD HYDRANT

EXISTING ACID WASTE (BELOW FLOOR)

SITE SANITARY SEWER

BACK FLOW PREVENTER

SITE STORM SEWER

FLOOR DRAIN SIZE-TYPE

SITE WATER PIPING

FLOOR SINK SIZE-TYPE

STORM DRAIN (BELOW FLOOR)

ROOF DRAIN SIZE-TYPE

SUB SOIL DRAIN

DOWN SPOUT

MANHOLE

ACID WASTE (ABOVE FLOOR)

VACUUM BREAKER

ACID WASTE (BELOW FLOOR)

GAS COCK

ACID VENT

RUNNING TRAP

VENT THROUGH ROOF ON RISER

PLUMBING RISER NUMBER

SHOWER

COLD WATER (CW)

COLD SOFT WATER

COMPRESSED AIR

HOT WATER (HW)

HOT WATER CIRCULATING (HWC)

HOT SOFT WATER

HOT SOFT WATER RECIRCULATING

STORM DRAIN (ABOVE FLOOR)

HOT WATER 140°

NATURAL GASG

DESCRIPTIONSYMBOLSYMBOL DESCRIPTION SYMBOL DESCRIPTION

PIPING

PTT

TEE

ELBOW

UNION

STRAINER WITH BLOW-OFF VALVE

BALANCING VALVE

ISOLATION VALVE (BALL OR BUTTERFLY)

PRESSURE RELIEF VALVE

ELBOW UP

ELBOW DOWN

GLOBE VALVE

PRESS / TEMP TEST PORT

GATE VALVE

CHECK VALVE (ARROW INDICATES FLOW)

FLEXIBLE PIPING

AUTOMATIC AIR VENT

MANUAL AIR VENT WITH ISOLATION VALVE

CONCENTRIC REDUCER

ECCENTRIC REDUCER

PRESSURE GAUGE WITH GAUGE COCK

THERMOMETER, SIDE FEED

THERMOMETER, BOTTOM FEED

ARROW INDICATES FLOW DIRECTION

ARROW INDICATES DOWNWARD PIPE PITCH

WATER METERM

FHC

FVC

PIV

DESCRIPTIONSYMBOLSYMBOL DESCRIPTION SYMBOL DESCRIPTION

FIRE PROTECTION

FIRE LINE

CEILING CLEAN AGENT NOZZLE FLUSH FIRE PUMP TEST HEADERSPRINKLER MAIN

SUB-FLOOR CLEAN AGENT NOZZLE FREE-STANDING FIRE PUMP TEST HEADERCLEAN AGENT

CEILING DETECTOR FREE-STANDING FIRE DEPARTMENT CONNECTIONSPRINKLER BRANCH AND HEADS

SUB-FLOOR DETECTOR FLUSH FIRE DEPARTMENT CONNECTIONRECESSED PENDANT SPRINKLER

CLEAN AGENT ALARM BELL FIRE DEPARTMENT CONNECTIONCONCEALED PENDANT SPRINKLER

CLEAN AGENT HORN WITH STROBE FIRE HOSE CABINETUPRIGHT SPRINKLER

ELECTRIC PULL STATION FIRE HOSE VALVE CABINETDRY PENDANT SPRINKLER

ABORT PULL STATION POST INDICATOR VALVEHORIZONTAL SIDEWALL SPRINKLER

CLEAN AGENT PRESSURE SWITCH ISOLATION VALVE WITH TAMPER SWITCHDRY HORIZONTAL SIDEWALL SPRINKLER

WARNING LIGHT ALARM CHECK VALVEPRE-ACTION HEAT DETECTOR

CLEAN AGENT PANEL DRY PIPE VALVEPRE-ACTION PULL STATION

FIRE HYDRANT FLOW SWITCHPRE-ACTION ALARM BELL

ALARM BELL WATER FLOW SWITCHPRE-ACTION TROUBLE STROBE

ALARM STROBEDELUGE VALVE FOR PRE-ACTION SYSTEM

PRE-ACTION RELEASING PANEL FIRE DEPARTMENT HOSE VALVE

CAP

MECHANICAL SYMBOLS MECHANICAL SYMBOLS

BLDG BUILDING

BTUH BRITISH THERMAL UNIT PER HOUR

C CONDUIT

CAB CABINET

CATV CABLE TELEVISION

CCTV CLOSED CIRCUIT TELEVISION

CFM CUBIC FEET PER MINUTE

CL CENTER LINE

CLG CEILING

CLR CLEAR

CRAC

CV CONSTANT VOLUME

DD DOUBLE DUCT

DIAMETER

DISC DISCONNECT

DIST DISTRIBUTION

DN DOWN

DWG DRAWING

EA EXHAUST AIR

EL ELEVATION

EHC ELECTRIC HEATING COIL

EMT ELECTRICAL METALLIC TUBING

EQUIP EQUIPMENT

EXH EXHAUST

EXIST EXISTING

FA FIRE ALARM

FAA FIRE ALARM ANNUNCIATOR PANEL

FACP FIRE ALARM CONTROL PANEL

FB FLOOR BOX

FL FLOOR

FLA FULL LOAD AMPS

FMG FACTORY MUTUAL GLOBAL

FT FEET

PWR POWER

PVC POLYVINYL CHLORIDE

PSI POUNDS PER SQUARE INCH

PSF POUNDS PER SQUARE FOOT

PRV PRESSURE REGULATING VALVE

PP PATCH PANEL

PNL PANEL

PLBG PLUMBING

PIV POST INDICATOR VALVE

RM ROOM

RH RELATIVE HUMIDITY

REQD REQUIRED

RLFA RELIEF AIR

RA RETURN AIR

UNO UNLESS NOTED OTHERWISE

UPS UNINTERRUPTIBLE POWER SUPPLY

UL UNDERWRITERS LABORATORY

UG UNDERGROUND

(TYP) TYPICAL

TV TELEVISION

TEMP TEMPERATURE

TEL TELEPHONE

TELECOM TELECOMMUNICATIONS

SWGR SWITCHGEAR

SWBD SWITCHBOARD

SW SWITCH

STD STANDARD

SS STAINLESS STEEL

SPECS SPECIFICATIONS

(SIM) SIMILAR

SCH SCHEDULE

SAN SANITARY

SA SUPPLY AIR, SOUND ATTENUATOR

KV KILOVOLT

NC NORMALLY CLOSED

MTG MOUNTING

MTD MOUNTED

MISC MISCELLANEOUS

(MIN) MINIMUM

MECH MECHANICAL

(MAX) MAXIMUM

MA MAKEUP AIR

LTG LIGHTING

LBS POUNDS

LAN LOCAL AREA NETWORK

KW KILOWATT

KVA KILOVOLT AMPERE

OC ON CENTER

OA OUTSIDE AIR

NTS NOT TO SCALE

NOM NOMINAL

NO NORMALLY OPEN

NIC NOT IN CONTRACT

NEC NATIONAL ELECTRICAL CODE

GA GAUGE

J-BOX JUNCTION BOX

HVAC HEATING, VENTILATING

HTG HEATING

HP HORSEPOWER, HEAT PUMP

HGT HEIGHT

GPM GALLONS PER MINUTE

GND GROUND

GFCI

GEN GENERATOR

GALV GALVANIZED

AND AIR CONDITIONING

ELEC ELECTRICAL

DIA

CPVC

CT COOLING TOWER, CABLE TRAY

DX DIRECT EXPANSION

EPO EMERGENCY POWER OFF

F FIRE WATER

FCO FLOOR CLEAN OUT

FDC FIRE DEPARTMENT CONNECTION

FHC FIRE HOSE CABINET

FURN FURNISHED

FW FILTERED WATER

G GAS

GC GENERAL CONTRACTOR

HW HOT WATER

HWC HOT WATER CIRCULATING

MAU MAKEUP AIR UNIT

MBH 1000 BTU/HOUR

MXA MIXED AIR

NPW NON-POTABLE WATER

PS PLASTER SINK

PTAC PACKAGED TERMINAL AIR CONDITIONER

RO REVERSE OSMOSIS WATER

RPBFP REDUCED PRESSURE BACKFLOW

SCW SOFT COLD WATER

SM SPRINKLER MAIN, SINGLE MODE

SSS SURGEON SCRUB SINK

SSD SUB SOIL DRAIN

ST STORM

SMACNA SHEET METAL AND AIR

CONDITIONING CONTRACTORS'

T TRANSFORMER

BICSI BUILDING INDUSTRY CONSULTING

BTU BRITISH THERMAL UNIT

CB CIRCUIT BREAKER

CKT CIRCUIT

CM COMMUNICATIONS CABLE

CMP COMMUNICATIONS PLENUM CABLE

CMR COMMUNICATIONS RISER CABLE

COAX COAXIAL CABLE

EMD ESTIMATED MAXIMUM DEMAND

EMI ELECTROMAGNETIC INTERFERENCE

ER EQUIPMENT ROOM

FO FIBER OPTIC

FP FIBER PANEL

PB PULLBOX

PERP PERPENDICULAR

PBX PRIVATE BRANCH EXCHANGE

RGS RIGID GALVANIZED STEEL

TR TELECOMMUNICATIONS ROOM

TMGB TELECOMMUNICATIONS MAIN

TGB TELECOMMUNICATIONS

TBB TELECOMMUNICATIONS

T-1 TRUNK LEVEL 1

STP SHIELDED TWISTED PAIR

OUTLET ASSEMBLY

MM MULTIMODE

MLO MAIN LUGS ONLY

MDF MAIN DISTRIBUTION FRAME

MC MAIN CROSS CONNECT

MATV MASTER ANTENNA TELEVISION

OSP OUTSIDE PLANT

KCMIL THOUSAND CIRCULAR MILS

ISP INSIDE PLANT

HZ HERTZ

GEC GROUNDING ELECTRODE CONDUCTOR

SERVICE INTERNATIONAL

MUTOA MULTI USER TELECOMMUNICATIONS

GROUNDING BUSBAR

TBBIBC TELECOMMUNICATIONS BONDING

CFH CUBIC FEET PER HOUR

SHW SOFT HOT WATER

TTB TELEPHONE TERMINAL BOARD

MERV MINIMUM EFFICIENCY REPORTING

VALUE

MOA MINIMUM OUTDOOR AIR

EOA ECONOMIZER OUTDOOR AIR

IE INVERT ELEVATION

IDF INTERMEDIATE DISTRIBUTION FRAME

IC INTERCOM

BACKBONE INTERCONNECTING

PREVENTER

NATIONAL ASSOCIATION

BONDING BACKBONE

BONDING CONDUCTOR

ACEG

AHJ

APPROX

ASHRAE

ATS

AUX

AVI

AWG

BFP

AMP

ALTERNATING CURRENT

AC EQUIPMENT GROUND

AUTHORITY HAVING JURISDICTION

APPROXIMATELY

AMERICAN SOCIETY OF HEATING,

REFRIGERATING AND

AIR-CONDITIONING ENGINEERS

AUTOMATIC TRANSFER SWITCH

AUXILIARY

ACID VENT, AUDIOVISUAL

ACID WASTE

AMERICAN WIRE GAUGE

BACKFLOW PREVENTER

UTILITY SINK

UNSHIELDED TWISTED PAIR

VOLT, VENT

VOLUME DAMPER

VERTICAL

VARIABLE FREQUENCY CONTROL

VENT THROUGH ROOF

WATER, WATT

WIDE AREA NETWORK

WIRELESS ACCESS POINT

WIRE MANAGEMENT PANEL

WEATHERPROOF

WIRE SIZING AMPS

WATER SOURCE HEAT PUMP

TRANSFORMER

UTP

VERT

VFC

VTR

WAN

WAP

WMP

WSA

WSHP

XFMR

ABBREVIATIONS

AFF ABOVE FINISHED FLOOR

ALF ALUMINUM FRAME DOOR

AMERICAN SOCIETY OF

MECHANICAL ENGINEERS

STANDARD SPECIFICATIONS OF

THE AMERICAN SOCIETY FOR

ASME

ASTM

TESTING MATERIALS

AVG AVERAGE

BAS BUILDING AUTOMATION SYSTEM

BTC BONDING CONDUCTOR FOR

TELECOMMUNICATION

CLEC COMPETITIVE LOCAL

EXCHANGE CARRIER

DAS DISTRIBUTION ANTENNA SYSTEM

DP DEMARCATION POINT

DPS DOOR POSITION SWITCH

DVR DIGITAL VIDEO RECORDER

EAC ELECTRONIC ACCESS CONTROL

EC ELECTRICAL CONTRACTOR

EMS ENERGY MANAGEMENT SYSTEM

FM FACTORY MUTUAL

ENGINEERING CORPORATION

FOV FIELD OF VIEW

HH HANDHOLE

HMF HOLLOW METAL FRAME DOOR

IDC INSULATION DISPLACEMENT

CONNECTOR

IDS INTRUSION DETECTION SYSTEM

IP INTERNET PROTOCOL

LEC LOCAL EXCHANGE CARRIER

LBM LATCH BOLT MONITOR

MCB MAIN CIRCUIT BREAKER

MPOE MAIN POINT OF ENTRANCE

NATIONAL FIRE PROTECTION

ASSOCIATION

MANUFACTURERS ASSOCIATION

NATIONAL ELECTRICALNEMA

NFPA

NVE NETWORK VIDEO ENCODER

NVR NETWORK VIDEO RECORDER

OR OPERATOR ROOM

OPE OWNER PROVIDED ELECTRONICS

PABX PRIVATE AUTOMATIC

BRANCH EXCHANGE

PBO PROVIDE BY OTHERS

PDU POWER DISTRIBUTION UNIT

PIC PLASTIC INSULATED CABLE

POE POWER OVER ETHERNET

POP POINT OF PRESENCE

PSTN PUBLIC SWITCH TELEPHONE NETWORK

PTZ PAN-TILT-ZOOM

RQE REQUEST TO EXIT

SCTP SCREENED TWISTED PAIR

SLAB SEALED LEAD ACID BATTERY

SSI SECURITY SYSTEMS INTEGRATOR

TC TELECOMMUNICATIONS CLOSET

TVSS TRANSIENT VOLTAGE SURGE

SUPPRESSION

VOICE OVER INTERNET PROTOCOLVOIP

WIRE TRANSFER HINGEWTH

CO-OSP

SPD SURGE PROTECTIVE DEVICE

WATER GUAGEWG

SYMBOLS INDICATED HERE AND NOT USED IN THE

CONTRACT DOCUMENTS DO NOT APPLY TO THIS

PROJECT. ADDITIONAL SYMBOLS AND ABBREVIATIONS

MAY BE INDICATED IN THE CONTRACT DOCUMENTS.

HVAC GENERAL NOTES:

SEE ARCHITECTURAL REFLECTED CEILING PLANS FOR DIFFUSER,

DO NOT RUN DUCTWORK OR PIPING ABOVE ELECTRICAL PANELS OR IN

CODE REQUIRED CLEARANCE SPACES. COORDINATE ALL ROUTING

WORK WITH ALL TRADES. DRAWINGS ARE DIAGRAMMATIC AND DO NOT

NECESSARILY SHOW ALL OFFSETS REQUIRED FOR COMPLETE SYSTEM.

CONTRACTOR SHALL COORDINATE LOCATION OF DUCTWORK IN

CEILING SPACE WITH ALL TRADES PRIOR TO FABRICATION AND

INSTALLATION OF DUCTWORK.

4. DUCTWORK AND EQUIPMENT SHOWN WITH THIN LINES INDICATES

EXISTING TO REMAIN. DUCTWORK AND EQUIPMENT SHOWN WITH

BOLD LINES INDICATES NEW.

5. PROVIDE/VERIFY VOLUME DAMPER IN ALL BRANCH TAKEOFFS

CONNECTING TO DIFFUSERS, REGISTERS, OR GRILLES AND IN

LOCATIONS INDICATED.

6. PROVIDE CLEARANCES TO ALL EQUIPMENT AS REQUIRED BY

MANUFACTURERS' INSTALLATION AND OPERATION REQUIREMENTS

AND/OR BY CODE.

DUCTWORK SHALL NOT BE FABRICATED UNTIL ALL COORDINATION

CONFLICTS HAVE BEEN RESOLVED.

10.

CAP ENDS OF ALL INSTALLED DUCTWORK DURING CONSTRUCTION

TO MINIMIZE DIRT, DEBRIS, AND FOREIGN OBJECTS FROM

ENTERING THE DUCT SYSTEM.

11.

COORDINATE SCHEDULE OF SHUTDOWN FOR EXISTING HVAC

SYSTEMS, FOR INSTALLATION OF NEW HVAC SYSTEMS, WITH THE

OWNER'S REPRESENTATIVE PRIOR TO SHUTDOWN.

COORDINATE LOCATION OF DUCTWORK WITH ELECTRICAL CABLE TRAYS.

ALL INSULATION SHALL MEET THE ENERGY CODE'S INSTALLED

R VALUE REQUIREMENTS.

PLUMBING GENERAL NOTES:

1. DO NOT RUN PIPING ABOVE ELECTRICAL PANEL OR IN CODE REQUIRED CLEARANCE

SPACES. COORDINATE ALL ROUTES WITH ALL TRADES PRIOR TO INSTALLATION.

2. DO NOT RUN PLUMBING, PIPING, AND DUCTWORK ABOVE OR THROUGH INFORMATION

TECHNOLOGY AND DATA CLOSETS, IDF, AND MDF ROOMS. COORDINATE ALL ROUTING

WITH ALL OTHER TRADES.

3. DRAWINGS, PLANS, SCHEMATICS, AND DIAGRAMS INDICATE THE GENERAL LOCATIONS

AND THE ARRANGEMENT OF SYSTEMS. WHEREVER PRACTICAL, INSTALL SYSTEMS AS

INDICATED. PROVIDE OFFSETS AND ELEVATION CHANGES TO PLUMBING, PIPING, AND

DUCTWORK AS REQUIRED TO COMPLETE THE LAYOUT AND COORDINATION PROCESS

AS WELL AS MEET ALL REQUIREMENTS OF THE CONTRACT DOCUMENTS.

4. SEE SPECIFICATIONS OR PLUMBING FIXTURE SCHEDULE FOR ALL PLUMBING

CONNECTION SIZES TO ALL PLUMBING FIXTURES.

5. DO NOT ROUTE PLUMBING BRANCHES OR MAINS WITHIN SPACE REQUIRED TO SERVICE

ALL HVAC EQUIPMENT ABOVE CEILINGS.

6. PIPING AND FIXTURES SHOWN WITH THIN LINES INDICATES EXISTING TO REMAIN.

PIPING AND FIXTURES SHOWN WITH BOLD LINES INDICATES NEW.

7. COORDINATE SHUT DOWN OF EXISTING WATER SERVICE WITH OWNERS

REPRESENTATIVE.

8. FURNISH AND INSTALL SHUT-OFF VALVES FOR WATER SUPPLY AT ALL EQUIPMENT

ITEMS.

9. PVC PIPING SHALL NOT BE INSTALLED IN RETURN AIR PLENUMS.

SPRINKLER NOTE:

RENOVATION AREA SHALL HAVE THE EXISTING FIRE PROTECTION SPRINKLER

SYSTEM MODIFIED TO MEET THE REQUIREMENTS OF THE NFPA CODES, THE STATE

FIRE MARSHAL'S OFFICE, AND THE OWNER'S APPROVING INSURANCE AGENCY.

SPRINKLER CONTRACTOR SHALL COORDINATE THE LOCATIONS OF ALL CEILING

MOUNTED SPRINKLER HEADS TO AVOID ANY AND ALL INTERFERENCE WITH ALL

OTHER TRADES. IF CONFLICTS DO OCCUR SUCH THAT LIGHTS, DUCTS, DIFFUSERS,

GRILLES, OR CEILING SYSTEMS CANNOT BE INSTALLED IN THEIR REQUIRED

LOCATIONS DUE TO SPRINKLER PIPING INTERFERENCE, THE PIPING SHALL BE

RELOCATED OR REROUTED AT NO ADDITIONAL EXPENSE TO THE PROJECT.

SPRINKLER CONTRACTOR SHALL MAINTAIN AN ADEQUATE SUPPLY OF EXTRA

PIPING, FITTINGS, AND NECESSARY TOOLS TO MAKE FIELD MODIFICATIONS

WITHOUT DELAY. AN APPROVED SPRINKLER SHOP DRAWING DOES NOT PRECLUDE

REROUTING IF SO ORDERED BY THE ARCHITECT/ENGINEER.

1 2 43 5 6

NOTE:

DO NOT SCALE DRAWINGS. VERIFY ALL DIMENSIONS AND

CLEARANCES FROM ARCHITECTURAL, STRUCTURAL,

SHOP AND OTHER APPROPRIATE DRAWING OR AT SITE.

LAY OUT AND COORDINATE ALL WORK PRIOR TO

INSTALLATION TO PROVIDE CLEARANCES REQUIRED FOR

OPERATION, MAINTENANCE, AND CODES AND VERIFY

NON-INTERFERENCE WITH OTHER WORK. DO NOT

FABRICATE PRIOR TO VERIFICATION OF CLEARANCE FOR

ALL TRADES. READ SPECIFICATIONS.

2016 5730

DATE PRINTED

PROGRESS

03/20/2017

3/20/17

C.A. NO. 842

EXPIRES 30/JUNE/2018

Demolition Floor Plan - HVAC M0.1 1/8" = 1'-0"

DUCT WORK SHOWN HATCHED TO BE REMOVED ( TYPICAL OF ALL HATCHED DUCTWORK).

2 ALL EXISTING SUPPLY AIR DIFFUSERS AND RETURN GRILLES SHOWN TO BE REPLACED.

REFER NEW FLOOR PLAN FOR NEW SUPPLY AND RETURN AIR DEVISES. EXISTING SUPPLY

AIR DIFFUSER RUNOUT DUCT TO REMAIN, PROTECT FROM DAMAGE.

3 EXISTING PACKAGED ROOF TOP UNIT ON ROOF TO BE REMOVED. CAP ROOF CURB ON ROOF

WITH GALVANIZED, INSULATED SHEET METAL (GISM) SECURED TO EXISTING ROOF CURB

AND SEALED WEATHER-TIGHT.

FLAG NOTES

EXISTING VARIABLE AIR VOLUME (VAV) TERMINAL AND HS/HR REHEAT COIL PIPING TRIM

AND PIPING APPURTENANCES TO BE RELOCATED. DISCONNECT T-STAT, HS/HR PIPING. CAP

EXISTING HS/HR PIPING THIS LOCATION.

5 EXISTING VAV TERMINAL TO BE REMOVED. CAP PRIMARY AIR DUCT, HS/HR PIPING AT

BRANCH CONNECTION.

EXISTING EXHAUST AIR DUCT WORK AND CONNECTED EXHAUST AIR GRILLE TO REMAIN.

DEMOLITION NOTES:

1. THE OWNER SHALL HAVE THE FIRST RIGHT OF SALVAGE FOR ALL MECHANICAL,

ELECTRICAL, AND PLUMBING ITEMS BEING REMOVED OR DEMOLISHED. IF OWNER

DECLINES, THE CONTRACTOR SHALL REMOVE FROM THE PREMISES AND DISPOSE OF

PROPERLY. VERIFY OWNER'S INTENT PRIOR TO REMOVAL OR DEMOLITION.

2. INFORMATION PERTAINING TO THE EXISTING BUILDING HAS BEEN OBTAINED THROUGH

THE BUILDINGS ORIGINAL DRAWINGS WHERE AVAILABLE. REPORT DISCREPANCIES TO

THE ARCHITECT/ENGINEER PRIOR TO ANY DEMOLITION. CONTRACTOR SHALL FIELD

VERIFY ALL EXISTING CONDITIONS PRIOR TO COMMENCING WORK.

3. COORDINATE SHUT DOWN OF ALL UTILITIES FOR DEMOLITION WORK WITH THE OWNER.

4. DISCONNECT, DEMOLISH, AND REMOVE MECHANICAL SYSTEMS, EQUIPMENT, AND

COMPONENTS INDICATED TO BE REMOVED. (HATCHED AND/OR NOTED).

PIPING TO BE REMOVED: REMOVE PORTION OF PIPING INDICATED TO BE REMOVED AND

CAP REMAINING PIPING WITH THE SAME OR COMPATIBLE PIPING MATERIAL.

PIPING TO BE ABANDONED IN PLACE: DRAIN PIPING AND CAP WITH THE SAME OR

COMPATIBLE PIPING MATERIAL.

DUCTS TO BE REMOVED: REMOVE PORTIONS OF DUCT AND CAP REMAINING DUCTS

WITH THE SAME OR COMPATIBLE DUCTWORK MATERIAL.

DUCTS TO BE ABANDONED IN PLACE: CAP DUCTS WITH THE SAME OR COMPATIBLE

DUCTWORK MATERIAL.

EQUIPMENT TO BE REMOVED: DISCONNECT AND CAP SERVICES AND REMOVE

EQUIPMENT.

EQUIPMENT TO BE REMOVED AND REINSTALLED: DISCONNECT AND CAP SERVICES AND

REMOVE, CLEAN, AND STORE EQUIPMENT. WHEN APPROPRIATE, REINSTALL,

RECONNECT, AND MAKE EQUIPMENT FULLY OPERATIONAL.

EQUIPMENT TO BE REMOVED AND SALVAGED: DISCONNECT AND CAP SERVICES AND

REMOVE EQUIPMENT AND DELIVER TO OWNER.

5. IF PIPE OR EQUIPMENT INSULATION TO REMAIN IS DAMAGED IN APPEARANCE OR IS

UNSERVICEABLE, REMOVE DAMAGED OR UNSERVICEABLE PORTIONS AND REPLACE

WITH NEW PRODUCTS OF EQUAL CAPACITY AND QUALITY.

6. CONTRACTOR IS REQUIRED TO VISIT SITE AND FIELD VERIFY ALL EXISTING CONDITIONS

PRIOR TO BIDDING PROJECT.

7. COORDINATE DEMOLITION WITH THE WORK OF OTHER TRADES. PROVIDE TEMPORARY

UTILITIES AS REQUIRED TO ALLOW THE WORK OF OTHER TRADES TO PROCEED.

8. ALL VAV TERMINALS AND CONNECTED HS/HR PIPING ARE EXISTING AND ARE TO

REMAIN IN CURRENT LOCATION UNLESS INDICATED TO BE REMOVED/RELOCATED.

9. ALL HVAC CONTROLS COMPONENTS AT EXISTING VAV TERMINALS INCLUDING BUT NOT

LIMITED TO

-HS/HR CONTROLS VALVES

-TEMPERATURE AND FLOW SENSORS

-VAV TERMINAL CONTROL BOARD AND DAMPER ACTUATOR

-ALL CONTROL WIRING TO/FROM BUILDING AUTOMATION SYSTEM

-ALL BUILDING AUTOMATION SYSTEM BUILDING AND AREA CONTROLLERS

ARE EXISTING AND ARE TO REMAIN. CONTRACTOR SHALL VERIFY ALL EXISTING HVAC

CONTROLS EQUIPMENT AND PROTECT FROM DAMAGE.

10. ALL EXISTING THERMOSTATS AND THERMOSTAT WIRING TO BE RELOCATED. REFER

NEW FLOOR PLAN FOR NEW THERMOSTAT LOCATION.

TYPICAL EXISTING VAV TERMINAL AND

CONNECTED HS/HR PIPING TO REMAIN

(TYP)

1 2 43 5 6

NOTE:

DO NOT SCALE DRAWINGS. VERIFY ALL DIMENSIONS AND

CLEARANCES FROM ARCHITECTURAL, STRUCTURAL,

SHOP AND OTHER APPROPRIATE DRAWING OR AT SITE.

LAY OUT AND COORDINATE ALL WORK PRIOR TO

INSTALLATION TO PROVIDE CLEARANCES REQUIRED FOR

OPERATION, MAINTENANCE, AND CODES AND VERIFY

NON-INTERFERENCE WITH OTHER WORK. DO NOT

FABRICATE PRIOR TO VERIFICATION OF CLEARANCE FOR

ALL TRADES. READ SPECIFICATIONS.

2016 5730

DATE PRINTED

PROGRESS

03/20/2017

3/20/17

C.A. NO. 842

EXPIRES 30/JUNE/2018

New Floor Plan - HVAC M1.1 1/8" = 1'-0"

FLAG NOTES

RELOCATED EXISTING VAV TERMINAL. EXTEND EXISTING 1/2" HS/HR PIPING AND

CONNECT TO VAV TERMINAL. REFER DETAIL ONE(1) ON SHEET M4.0.

CONNECT 1/2" HW/CW, AND 1-1/4" VENT TO EXISTING HW/CW AND VENT ABOVE

CEILING. VERIFY EXACT LOCATION EXTEND AND CONNECT TO NEW SINK S-1.

DROP 1-1/2" WASTE BELOW FLOOR AND CONNECT TO EXISTING WASTE AT TOILET

GROUP. VERIFY EXACT LOCATION EXTEND AND CONNECT.

PROVIDE 1/2" CW TAP, THROUGH BEVERAGE TYPE BACK FLOW PREVENTER AND

STOP-COCK FOR CONNECTION TO AUTOMATIC COFFEE MAKER IN MILLWORK

BELOW SINK.

NEW LOCATION FOR EXISTING THERMOSTAT, PROVIDE ADDITIONAL CONTROL

WIRING TO VAV TERMINAL AS REQUIRED.TYPICAL ALL THERMOSTATS.

CONTRACTOR TO VERIFY ALL CONTROL OPERATIONS (SEQUENCE OF OPERATIONS)

AT EXISTING VAV TERMINALS, CONTRACTOR SHALL VERIFY ALL GRAPHIC

REPRESENTATIONS AND CONTROL OPERATIONS AT THE CAMPUS-WIDE BUILDING

AUTOMATION SYSTEM OPERATORS CONTROL STATION. REFER SPECIFICATION

SECTION 23 0993 SEQUENCE OF OPERATIONS FOR CONTROL AND GRAPHICAL

REPRESENTATION AND CONTROL OPERATION REQUIREMENTS.

PROVIDE MANUAL AIR BALANCING DAMPER AT RETURN/EXHAUST GRILL OPERABLE

FROM FACE OF DEVICE.

EXISTING EXHAUST AIR DUCKWORK AND EXHAUST GRILLES TO REMAIN.

VAT

06 VAT

20 VAT

VAT

12VAT

VAT

300 300 300

300300

335 335

400 400

400400

375375

530 530

455455

455 455320

330450450

220300300

500 500

585 585

500 500

545545

M4.0

TYP

25055

24/12

S-1

CEILING SUPPLY AIR DIFFUSER

SIZING SCHEDULE

MARK NECK SIZE CFM RANGE

6"Ø 0 - 110

D-1 8"Ø 111 - 240

10"Ø 241 - 420

12"Ø 421 - 550

14"Ø 551 - 680

15"Ø 681 - 785

NOTES:

1. USE 24 X 24 PANELS FOR ALL LAY-IN CEILINGS.

2. ALL CEILING SUPPLY DIIFFUSERS SHALL BE TYPE D-1 EXCEPT AS INDICATED ON THE

PLANS.

3. SUPPLY AIR BRANCH DUCT TO DIFFUSER SHALL BE DIFFUSER NECK SIZE UNLESS

OTHERWISE INDICATED.

4. BASIS OF DESIGN: TITUS OMNI.

CEILING RETURN/EXHAUST GRILLE

SIZING SCHEDULE

MARK

NECK SIZE

(INCHES) CFM RANGE

8x8 125 - 200

G-1 10x10 201 - 360

12x12 361 - 525

14x14 526 - 705

16x16 706 - 975

18x18 976 - 1150

22x22 1151 - 1600

G-2 6x6 0 - 95

18x6 96 - 380

22x10 381 - 775

NOTES:

1. ALL CEILING EXHAUST OR RETURN GRILLES SHALL BE G-1 OR G-2 EXCEPT AS

INDICATED ON THE PLANS.

2. BRANCH DUCT TO GRILLE WHERE SHOWN SHALL BE GRILLE NECK SIZE OR

EQUIVALENT ROUND DUCT UNLESS OTHERWISE INDICATED.

3 G-1 FACE SIZE SHALL BE 24" X 24".

4. USE 22" X 22 " NECK SIZE ON G-1 IN PLENUM RETURN SYSTEMS .

5. G-2 FACE SIZE SHALL BE 24" X 12".

6. USE 22" X 10 " NECK SIZE ON G-2 IN PLENUM RETURN SYSTEMS .

7. BASIS OF DESIGN: TITUS 350 RL.

6 5

(TYP)

M4.0

(TYP)

20/12

10/10 10Ø

16/10 10/10 10/10

10/10

NOTE:

DO NOT SCALE DRAWINGS. VERIFY ALL DIMENSIONS AND

CLEARANCES FROM ARCHITECTURAL, STRUCTURAL,

SHOP AND OTHER APPROPRIATE DRAWING OR AT SITE.

LAY OUT AND COORDINATE ALL WORK PRIOR TO

INSTALLATION TO PROVIDE CLEARANCES REQUIRED FOR

OPERATION, MAINTENANCE, AND CODES AND VERIFY

NON-INTERFERENCE WITH OTHER WORK. DO NOT

FABRICATE PRIOR TO VERIFICATION OF CLEARANCE FOR

ALL TRADES. READ SPECIFICATIONS.

2016 5730

DATE PRINTED

PROGRESS

03/20/2017

3/20/17

C.A. NO. 842

EXPIRES 30/JUNE/2018

CONTRACTOR SHALL VERIFY CEILING CONSTRUCTION (SURFACE/LAY-IN) AND PROVIDE MATCHING

MOUNTING TYPE.

DESCRIPTIONMARK BASIS OF DESIGN CONNECTION DETAILS

FIXTURE: SINGLE BOWL, SELF-RIMMING, COUNTER

MOUNTED, 18 GAUGE TYPE 302 (18-8) STAINLESS STEEL

WITH FAUCET LEDGE, SOUND DEADENING

UNDERCOATING, PUNCHED TO MATCH FAUCET. DRAIN:

CRUMB CUP STRAINER. SIZE: 25"x22"x8" DEEP. FAUCET:

CHROME PLATED BRASS, SINGLE LEVER CONTROL WITH

9" SWING SPOUT FAUCET WITH AERATOR AND 7" SPOUT

HEIGHT.

S-1 SINK FIXTURE: ELKAY

"LUSTERTONE" LR2522

FAUCET: KOHLER

"CORALAIS" K-15075-P

HWCWVENTWASTE

1/2"1/2"1 1/2"1 1/2"

REMARKS: .

AIR TERMINAL UNIT SCHEDULE

MARK SERVES

CFM

BOX INLET

DIAMETER (IN)

MIN. HEATING

COIL MBH (2)

MAX. HEATING

COIL GPM

REMARKSMAX.

COOLING

HEATING MIN. OCCUPIED

VAT 01 OFFICE 300 150 150 6 8.1 0.60 1,2,3

VAT 02 OFFICE 1640 820 820 16 35.4 2.35 1,2,3

VAT 03 OFFICE 300 150 150 6 8.1 0.60 1,2,3

VAT 04 OFFICE 670 335 335 8 14.4 1.00 1,2,3

VAT 05 OFFICE 1090 545 545 12 23.5 1.60 1,2,3

VAT 06 OFFICE 1615 805 805 16 34.7 2.30 1,2,3

VAT 07 OFFICE 1000 500 500 12 21.6 1.50 1,2,3

VAT 08 OFFICE 1400 700 700 12 30.2 2.00 1,2,3

VAT 09 OFFICE 1000 500 500 12 21.6 1.50 1,2,3

VAT 10 OFFICE 1040 520 520 16 22.4 1.50 1,2,3

VAT 11 OFFICE 480 240 240 7 10.3 0.75 1,2,3

VAT 12 OFFICE 1080 540 540 12 23.3 1.60 1,2,3

VAT 13 OFFICE 330 165 165 6 7.1 0.50 1,2,3

VAT 14 OFFICE 330 165 165 6 7.1 0.50 1,2,3

VAT 15 OFFICE 1820 910 910 16 39.3 2.60 1,2,3

VAT 16 OFFICE 830 415 415 10 17.9 1.20 1,2,3

VAT 17 OFFICE 75 75 75 4 - - 1,2,3

VAT 18 OFFICE 1170 585 585 12 25.2 1.70 1,2,3

VAT 19 OFFICE 1170 585 585 12 25.2 1.70 1,2,3

VAT 20 TOILET 660 330 330 8 14.3 1.00 1,2,3

VAT 21 OFFICE 550 275 275 7 11.8 0.80 1,2,3

VAT 22 OFFICE 1460 730 730 12 31.5 2.10 1,2,3

VAT 23 OFFICE 1060 530 530 12 23.3 1.60 1,2,3

VAT 24 OFFICE 1970 985 985 16 42.5 2.80 1,2,3

VAT 25 OFFICE 1600 800 800 16 34.5 2.30 1,2,3

REMARKS:

1. ALL TERMIANL UNITS ARE EXISTING, CAPACITY INFORMATION SHOWN HERE FOR TEST/BALANCE ADJUSTMENT.

2. HEATING CAPACITY BASED ON HEATING CFM, EWT = 180°F, LWT = 150°F, AND EAT = 55°F, LAT = 105°F.

3. ALL TERMINAL HVAC CONTROLS FOR UNIT OPERATIONS AND BUILDING AUTOMATION SYSTEM INTEGRATION ARE EXISTING AND ARE TO BE REUSED, REFER FLOOR PLANS FOR ADDITIONAL

REQUIREMENTS.

AIR TRANSFER/SOUND TRAP DETAIL

NO SCALE

1" ACOUSTICAL

DUCT LINER

1" ACOUSTICAL

DUCT LINER

M4.0

PROVIDE SERVICE CLEARANCES ON

SIDES TOP AND BOTTOM, 18" MINIMUM

(AS INDICATED)

HEATING COIL (AS INDICATED)

HEATING COIL ACCESS

DOORS (AS INDICATED)

CONTROL ENCLOSURE

SINGLE DUCT AIR TERMINAL UNIT (VAV)

NO SCALE

STRAIGHT SECTION OF INLET

DUCT PER MANUFACTURER'S

REQUIREMENTS

VAV BRANCH

SUPPLY DUCT

SUPPLY

AIR

LINER OR

ATTENUATOR

SECTION AS

INDICATED

HEATING COIL ACCESS (AS INDICATED)

M4.0

PRESSURE/TEMPERATURE

TEST PORT (PTT)

TERMINAL

UNIT HOT WATER COIL

NO SCALE (2-WAY VALVE DUCT COIL)

TWO-WAY AUTO

VALVE

ISOLATION

VALVES

BALANCE DEVICE

STRAINER

UNION (TYP)

MANUAL AIR

VENT

DRAIN

TERMINAL DISCHARGE/SUPPLY

AIR DUCT

FLEX DUCT AT

TERMINAL INLET

ALL VAV TERMINALS ARE EXISTING AND ARE TO REMAIN

IN CURRENT LOCATIONS UNLESS INDICATED TO BE

RELOCATED.

24/12

WALL/PARTION

M4.0

RETURN AIR TRANSFER DUCT,

DUCT SIZE SHALL BE INSIDE

CLEAR DIMENSIONS

22/14 AT 24/24 FACE SIZE

22/8 AT 24/12 FACE SIZE

RETURN AIR SOUND BOOT

NO SCALE

RETURN AIR DUCT

INSULATED WITH 1"

ACOUSTICAL DUCT LINER

RETURN AIR TO

CEILING SPACE

RETURN AIR

FROM SPACE

M4.0

ALL HEATING COILS AND PIPING APPURTENANCES SHOWN

THIS DETAIL ARE EXISTING AND ARE TO REMAIN,

CONTRACTOR TO VERIFY ALL ITEMS SHOWN. REPAIR

AND/OR REPLACE DEFECTIVE ITEMS. REPAIR AND/OR

REPLACE DAMAGED OR MISSING PIPING INSULATION AT

HS/HR PIPING.

RETURN AIR GRILLE

Horner Associates Engineers, Inc.

1306 Commerce Dr, Norman, OK 73071 info@haeinc.com Ph (405) 801-2528 Fax (405) 801-2529 Certificate of Authorization No. CA 3520, Expires 6/30/2017

03-27-17

AutoCAD SHX Text

MIKE MONRONEY AERONAUTICAL CENTER - OKLAHOMA CITY, OKLAHOMA

AutoCAD SHX Text

DESIGNED

AutoCAD SHX Text

WORK ORDER NO.

AutoCAD SHX Text

DRAWN

AutoCAD SHX Text

OFFICE OF

AutoCAD SHX Text

ISSUED BY

AutoCAD SHX Text

AMP-400-D-

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FEDERAL AVIATION ADMINISTRATION

AutoCAD SHX Text

PREPARED BY

AutoCAD SHX Text

REV

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DEPARTMENT OF TRANSPORTATION

AutoCAD SHX Text

APPROVED BY

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

APP'D

AutoCAD SHX Text

CHECK

AutoCAD SHX Text

TRIAD DESIGN GROUP

AutoCAD SHX Text

JDH

AutoCAD SHX Text

JDH

AutoCAD SHX Text 2016-012270

AutoCAD SHX Text Dwaine Rhodes, Architect

AutoCAD SHX Text Architecture and Engineering Divison, AMP-400

AutoCAD SHX Text

HORNER ASSOCIATES ENGINEERS, INC.

AutoCAD SHX Text

AutoCAD SHX Text Contract Number:

AutoCAD SHX Text AHQ 2nd FLOOR AAQ RENOVATION

AutoCAD SHX Text

DTFAAC-16-D-00039

AutoCAD SHX Text

AHQ

AutoCAD SHX Text 2016012270

AutoCAD SHX Text March 27, 2017

AutoCAD SHX Text 17193

AutoCAD SHX Text

HORNER

AutoCAD SHX Text

JULIAN DUANE

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text G

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text P

AutoCAD SHX Text R

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text O

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text L

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text G

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text O

AutoCAD SHX Text K

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text H

AutoCAD SHX Text O

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text

POTENTIAL TRANSFORMER

AutoCAD SHX Text

CURRENT TRANSFORMER

AutoCAD SHX Text

LIGHTNING ARRESTOR

AutoCAD SHX Text

COMBINATION BELL/STROBE (MOUNTING HEIGHT AS REQ. BY LOCAL AHJ)

AutoCAD SHX Text

FIRE ALARM CONTROL PANEL

AutoCAD SHX Text

MANUAL PULL STATION (MTD. 46" AFF TO CENTER, UNO)

AutoCAD SHX Text

COMBINATION HORN/STROBE (MOUNTING HEIGHT AS REQ. BY LOCAL AHJ)

AutoCAD SHX Text

ALARM STROBE LIGHT (MOUNTING HEIGHT AS REQ. BY LOCAL AHJ)

AutoCAD SHX Text

DRAW OUT CIRCUIT BREAKER

AutoCAD SHX Text

DELTA PRIMARY, WYE GROUNDED SECONDARY

AutoCAD SHX Text

ELEMENTARY DIAGRAM

AutoCAD SHX Text

DUCT MOUNTED SMOKE DETECTOR

AutoCAD SHX Text

SMOKE DETECTOR (UF = UNDERFLOOR)

AutoCAD SHX Text

INDIVIDUAL ADDRESSABLE MODULE

AutoCAD SHX Text

INTRUSION ALARM DOOR SWITCH

AutoCAD SHX Text

REMOTE DOOR LOCK/UNLOCK CONNECTION

AutoCAD SHX Text

DOOR ENTRY DEVICE CONTACT

AutoCAD SHX Text

DOOR OPERATOR CONNECTION

AutoCAD SHX Text

DOOR EXIT DEVICE CONTACT

AutoCAD SHX Text

SECURITY/INTRUSION ALARM

AutoCAD SHX Text

FIRE ALARM SYSTEM ANNUNCIATOR

AutoCAD SHX Text

MEDIUM VOLTAGE LOADBREAK SEPARABLE CONNECTOR

AutoCAD SHX Text

MEDIUM VOLTAGE DEADBREAK SEPARABLE CONNECTOR

AutoCAD SHX Text

STARTER NEMA SIZE

AutoCAD SHX Text

STARTER NEMA SIZE

AutoCAD SHX Text

(NF=NON-FUSED)

AutoCAD SHX Text

SAFETY DISCONNECT SWITCH PROVIDED WITH EQUIPMENT

AutoCAD SHX Text

MOTOR STARTER OR CONTROL PANEL FURNISHED WITH EQUIPMENT

AutoCAD SHX Text

COMBINATION MOTOR STARTER AND DISCONNECT SWITCH

AutoCAD SHX Text X

AutoCAD SHX Text

AutoCAD SHX Text X

AutoCAD SHX Text

FUSE SIZE

AutoCAD SHX Text

SWITCH SIZE

AutoCAD SHX Text

MCP SIZE, UNO

AutoCAD SHX Text

MOTOR STARTER

AutoCAD SHX Text

AutoCAD SHX Text X

AutoCAD SHX Text

(FYY=FUSE SIZE)

AutoCAD SHX Text V

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text

VOLTMETER

AutoCAD SHX Text

AMMETER SWITCH

AutoCAD SHX Text

OVERLOAD RELAY

AutoCAD SHX Text

AMMETER

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

CONDUIT TURNING UP

AutoCAD SHX Text

CONDUIT TURNING DOWN

AutoCAD SHX Text

PART CIRCUIT HOMERUN

AutoCAD SHX Text

480V PANELBOARD SURFACE MOUNTED, UNO

AutoCAD SHX Text

480V PANELBOARD FLUSH MOUNTED, UNO

AutoCAD SHX Text

CONDUIT ROUTED EXPOSED

AutoCAD SHX Text

CONDUIT ROUTED CONCEALED WITHIN OR BELOW FLOOR OR CONCRETE

AutoCAD SHX Text

HOMERUN TO PANEL INDICATED. ARROWHEADS INDICATE NUMBER OF CCTS.

AutoCAD SHX Text

CONDUIT CAPPED FOR FUTURE USE

AutoCAD SHX Text

EXISTING CONDUIT TO BE REMOVED

AutoCAD SHX Text

CIRCUITING/RACEWAY

AutoCAD SHX Text

BRANCH CIRCUIT CONCEALED ABOVE CEILING OR WITHIN WALL.

AutoCAD SHX Text

TICK MARKS INDICATE NUMBER OF CONDUCTORS, ( ) INDICATES GROUND

AutoCAD SHX Text

CONDUCTOR, NO TICK MARKS INDICATES 2 #12, 1 #12GND., 3/4"C., UNO

AutoCAD SHX Text

LOW VOLTAGE WIRING IN CONDUIT

AutoCAD SHX Text

POWER DISTRIBUTION

AutoCAD SHX Text

208V PANELBOARD SURFACE MOUNTED, UNO

AutoCAD SHX Text

CONDUIT SEAL (APPLETON #EYSEF OR EQUAL)

AutoCAD SHX Text

CONDUIT CHANGE IN ELEVATION

AutoCAD SHX Text

BELOW RAISED ACCESS FLOOR

AutoCAD SHX Text

EMT SIZED AS NOTED WITH PULLWIRE FOR TELECOMMUNICATIONS

AutoCAD SHX Text

3/4" LIQUIDTIGHT FLEXIBLE METALLIC CONDUIT

AutoCAD SHX Text

3/4" LIQUIDTIGHT FLEXIBLE METALLIC CONDUIT WITH

AutoCAD SHX Text

2 #12, 1 #12 GND. FOR POWER, UNO

AutoCAD SHX Text

WITH PULLWIRE FOR TELECOMMUNICATIONS

AutoCAD SHX Text

SAFETY DISCONNECT SWITCH

AutoCAD SHX Text

208V PANELBOARD FLUSH MOUNTED, UNO

AutoCAD SHX Text C

AutoCAD SHX Text P

AutoCAD SHX Text

AutoCAD SHX Text T

AutoCAD SHX Text

AutoCAD SHX Text W

AutoCAD SHX Text B

AutoCAD SHX Text

DUCTBANK

AutoCAD SHX Text

WIREWAY

AutoCAD SHX Text

BUSWAY

AutoCAD SHX Text X

AutoCAD SHX Text

CABLE TRAY

AutoCAD SHX Text

CPENTID

AutoCAD SHX Text

(PC)

AutoCAD SHX Text

CARD READER

AutoCAD SHX Text

FUSED SWITCH

AutoCAD SHX Text

CPENTID

AutoCAD SHX Text

CPENTID

AutoCAD SHX Text

GROUND

AutoCAD SHX Text

TRANSFORMER

AutoCAD SHX Text

CPENTID

AutoCAD SHX Text

FRAME SIZE

AutoCAD SHX Text

FUSE

AutoCAD SHX Text

SWITCH

AutoCAD SHX Text

CIRCUIT BREAKER

AutoCAD SHX Text

SECURITY CAMERA

AutoCAD SHX Text

TRIP SIZE

AutoCAD SHX Text

IAM

AutoCAD SHX Text

TAMPER SWITCH

AutoCAD SHX Text

CONTROL MODULE

AutoCAD SHX Text

DOOR HOLDER

AutoCAD SHX Text

PRESSURE SWITCH

AutoCAD SHX Text

HEAT DETECTOR

AutoCAD SHX Text

FLOW SWITCH

AutoCAD SHX Text

INTERCOM STATION CALL-IN SWITCH

AutoCAD SHX Text

RECESSED

AutoCAD SHX Text

DOUBLE BAFFLE

AutoCAD SHX Text

PAGING/SOUND/INTERCOM

AutoCAD SHX Text

SPEAKER WALL MOUNTED

AutoCAD SHX Text

ELECTRICAL LEGEND

AutoCAD SHX Text

SPEAKER RECESSED IN CEILING, UNO

AutoCAD SHX Text

SPEAKER - TRUMPET TYPE, WALL MOUNTED, UNO

AutoCAD SHX Text

VOLUME CONTROL WALL MOUNTED 46" AFF TO CENTER, UNO

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

BUZZER

AutoCAD SHX Text R

AutoCAD SHX Text S

AutoCAD SHX Text

SURFACE

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

SUBSCRIPTS:

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

VOLUME CONTROL

AutoCAD SHX Text

WEATHERPROOF

AutoCAD SHX Text

FCP

AutoCAD SHX Text

FSA

AutoCAD SHX Text

ALARM BELL

AutoCAD SHX Text

ALARM HORN

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

FIRE ALARM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

VOLTMETER SWITCH

AutoCAD SHX Text

HAND-OFF-AUTO SWITCH

AutoCAD SHX Text

DOUBLE THROW SWITCH

AutoCAD SHX Text

RELAY COIL (SUBSCRIPT INDICATES NUMBER OF CONTACTS)

AutoCAD SHX Text

PILOT LIGHT (R=RED, G=GREEN, A=AMBER)

AutoCAD SHX Text

NORMALLY OPEN CONTACT (SUBSCRIPT INDICATES COIL AND

AutoCAD SHX Text

NORMALLY CLOSED CONTACT

AutoCAD SHX Text

NORMALLY OPEN PUSHBUTTON

AutoCAD SHX Text

NORMALLY CLOSED PUSHBUTTON

AutoCAD SHX Text

TEMPERATURE SWITCH (FS=FREEZE STAT)

AutoCAD SHX Text

NORMALLY OPEN LIMIT SWITCH

AutoCAD SHX Text

NORMALLY CLOSED LIMIT SWITCH

AutoCAD SHX Text

THERMAL OVERLOAD RELAY CONTACT

AutoCAD SHX Text

PUSHBUTTON STATION

AutoCAD SHX Text

SV = SOLENOID VALVE

AutoCAD SHX Text

COMBINATION MOTOR STARTER/DISCONNECT SWITCH OR CONTROL PANEL

AutoCAD SHX Text

PROVIDED WITH EQUIPMENT

AutoCAD SHX Text

VARIABLE FREQUENCY DRIVE

AutoCAD SHX Text

MOTOR (HORSEPOWER AS INDICATED)

AutoCAD SHX Text

JUNCTION BOX, WALL MOUNTED

AutoCAD SHX Text

PHOTOELECTRIC CELL. MOUNT FACING NORTH WHENEVER POSSIBLE

AutoCAD SHX Text

THERMOSTAT OR TEMPERATURE SENSOR. RE: MECHANICAL

AutoCAD SHX Text

CONTROL DEVICE: LS = LIMIT SWITCH, FS = FLOAT SWITCH,

AutoCAD SHX Text

UNDERFLOOR DUCT JUNCTION BOX

AutoCAD SHX Text

CONTROL/MISC

AutoCAD SHX Text M

AutoCAD SHX Text

METER

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text P

AutoCAD SHX Text

GROUND ROD

AutoCAD SHX Text

GROUND WELL

AutoCAD SHX Text P

AutoCAD SHX Text B

AutoCAD SHX Text

VFD

AutoCAD SHX Text T

AutoCAD SHX Text

PULL BOX

AutoCAD SHX Text

TRANSFORMER

AutoCAD SHX Text

JUNCTION BOX

AutoCAD SHX Text

MCP SIZE, UNO

AutoCAD SHX Text

FLOAT SWITCH

AutoCAD SHX Text

CPENTID

AutoCAD SHX Text

FLOW SWITCH

AutoCAD SHX Text A

AutoCAD SHX Text X00

AutoCAD SHX Text H

AutoCAD SHX Text 00X

AutoCAD SHX Text

PRESSURE SWITCH

AutoCAD SHX Text

(FYY=FUSE SIZE)

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text

SOLENOID

AutoCAD SHX Text

CONTACT NUMBER)

AutoCAD SHX Text

AutoCAD SHX Text R

AutoCAD SHX Text

CPENTID

AutoCAD SHX Text +48"

AutoCAD SHX Text -48"

AutoCAD SHX Text

MOUNTING HEIGHT ABOVE FINISHED FLOOR TO CENTER, UNO

AutoCAD SHX Text

MOUNTING DEPTH BELOW FINISHED FLOOR TO CENTER, UNO

AutoCAD SHX Text

EXPLOSION PROOF

AutoCAD SHX Text

EXIST. OR E

AutoCAD SHX Text

GFI OR GFCI

AutoCAD SHX Text

NEUT.

AutoCAD SHX Text

TOF

AutoCAD SHX Text

UNO

AutoCAD SHX Text W

AutoCAD SHX Text W/

AutoCAD SHX Text W/O

AutoCAD SHX Text

VFD

AutoCAD SHX Text V

AutoCAD SHX Text

XFMR

AutoCAD SHX Text %%c

AutoCAD SHX Text

UGC

AutoCAD SHX Text

UGE

AutoCAD SHX Text

UGT

AutoCAD SHX Text

TTB

AutoCAD SHX Text

TYP

AutoCAD SHX Text

SPDT

AutoCAD SHX Text

SPST

AutoCAD SHX Text

RE:

AutoCAD SHX Text

PVC

AutoCAD SHX Text

RGSC

AutoCAD SHX Text

SPECS

AutoCAD SHX Text

SCH.

AutoCAD SHX Text S/N

AutoCAD SHX Text

NIC

AutoCAD SHX Text

PTT

AutoCAD SHX Text

PNL

AutoCAD SHX Text

AutoCAD SHX Text N.O.

AutoCAD SHX Text

KWH

AutoCAD SHX Text

MIN

AutoCAD SHX Text

MTG

AutoCAD SHX Text

MLO

AutoCAD SHX Text

MISC.

AutoCAD SHX Text

NEC

AutoCAD SHX Text N.C.

AutoCAD SHX Text N/A

AutoCAD SHX Text

MAX

AutoCAD SHX Text

MCA

AutoCAD SHX Text

MCB

AutoCAD SHX Text

MCC

AutoCAD SHX Text

MCP

AutoCAD SHX Text

LTFMC

AutoCAD SHX Text

HPS

AutoCAD SHX Text

KVA

AutoCAD SHX Text

IE.

AutoCAD SHX Text

EWC

AutoCAD SHX Text

FMC

AutoCAD SHX Text

FIC

AutoCAD SHX Text

GND.

AutoCAD SHX Text

ETC.

AutoCAD SHX Text

NEUTRAL

AutoCAD SHX Text

NIGHT LIGHT (CONNECT TO UNSWITCHED CIRCUIT)

AutoCAD SHX Text

RIGID GALVANIZED STEEL CONDUIT

AutoCAD SHX Text

TOP OF FIXTURE

AutoCAD SHX Text

WEATHERPROOF

AutoCAD SHX Text

TRANSFORMER

AutoCAD SHX Text

TELEPHONE TERMINAL BOARD

AutoCAD SHX Text

UNDERGROUND COMMUNICATIONS

AutoCAD SHX Text

UNDERGROUND ELECTRIC

AutoCAD SHX Text

UNDERGROUND TELEPHONE

AutoCAD SHX Text

UNDERWRITERS LABORATORIES

AutoCAD SHX Text

UNLESS NOTED OTHERWISE

AutoCAD SHX Text

VARIABLE FREQUENCY DRIVE

AutoCAD SHX Text

UNDERGROUND

AutoCAD SHX Text

WATTS

AutoCAD SHX Text

WITHOUT

AutoCAD SHX Text

WITH

AutoCAD SHX Text

VOLTS

AutoCAD SHX Text

PHASE

AutoCAD SHX Text

TYPICAL

AutoCAD SHX Text

SINGLE POLE DOUBLE THROW

AutoCAD SHX Text

SINGLE POLE SINGLE THROW

AutoCAD SHX Text

NOT IN CONTRACT

AutoCAD SHX Text

POLYVINYL CHLORIDE

AutoCAD SHX Text

CONTRACT SPECIFICATIONS

AutoCAD SHX Text

PUSH TO TEST

AutoCAD SHX Text

SOLID NEUTRAL

AutoCAD SHX Text

PART CIRCUIT

AutoCAD SHX Text

NORMALLY OPEN

AutoCAD SHX Text

SCHEDULE

AutoCAD SHX Text

REFERENCE

AutoCAD SHX Text

OVERHEAD

AutoCAD SHX Text

ON CENTER

AutoCAD SHX Text

PANELBOARD

AutoCAD SHX Text

FIBER OPTIC INTERCONNECT CENTER

AutoCAD SHX Text

GROUND FAULT CIRCUIT INTERRUPTER

AutoCAD SHX Text

LIQUID TIGHT FLEXIBLE METALLIC CONDUIT

AutoCAD SHX Text

KILOWATT HOUR

AutoCAD SHX Text

MINIMUM CIRCUIT AMPACITY

AutoCAD SHX Text

NOT APPLICABLE

AutoCAD SHX Text

NORMALLY CLOSED

AutoCAD SHX Text

MAIN LUGS ONLY

AutoCAD SHX Text

MAIN CIRCUIT BREAKER

AutoCAD SHX Text

MOTOR CONTROL CENTER

AutoCAD SHX Text

MOTOR CIRCUIT PROTECTOR

AutoCAD SHX Text

NATIONAL ELECTRICAL CODE

AutoCAD SHX Text

MISCELLANEOUS

AutoCAD SHX Text

LOW VOLTAGE

AutoCAD SHX Text

MANHOLE

AutoCAD SHX Text

MINIMUM

AutoCAD SHX Text

MOUNTING

AutoCAD SHX Text

MAXIMUM

AutoCAD SHX Text

INTRUSION ALARM

AutoCAD SHX Text

ISOLATED GROUND

AutoCAD SHX Text

KILOVOLT AMPERES

AutoCAD SHX Text

ELECTRIC WATER COOLER

AutoCAD SHX Text

FLEXIBLE METALLIC CONDUIT

AutoCAD SHX Text

HIGH PRESSURE SODIUM

AutoCAD SHX Text

HIGH VOLTAGE

AutoCAD SHX Text

HERTZ

AutoCAD SHX Text

THAT IS

AutoCAD SHX Text

KILOVOLTS

AutoCAD SHX Text

GROUND

AutoCAD SHX Text

ET CETERA

AutoCAD SHX Text

EXISTING

AutoCAD SHX Text

FIRE ALARM

AutoCAD SHX Text

ABBREVIATION

AutoCAD SHX Text

A OR AMP

AutoCAD SHX Text

CCT

AutoCAD SHX Text

DDC

AutoCAD SHX Text

EMT

AutoCAD SHX Text

ELEC

AutoCAD SHX Text

EMCS

AutoCAD SHX Text

AWG

AutoCAD SHX Text

BFF

AutoCAD SHX Text

BFG

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text

BOF

AutoCAD SHX Text

BKR

AutoCAD SHX Text

BLDG

AutoCAD SHX Text

AFF

AutoCAD SHX Text

ARF

AutoCAD SHX Text

AFG

AutoCAD SHX Text

AIC

AutoCAD SHX Text

ABBREVIATIONS

AutoCAD SHX Text

SYMMETRICAL AMPS INTERRUPTING CAPACITY

AutoCAD SHX Text

ENERGY MANAGEMENT & CONTROL SYSTEM

AutoCAD SHX Text

CIRCUIT BREAKER

AutoCAD SHX Text

DIRECT DIGITAL CONTROL

AutoCAD SHX Text

AMERICAN WIRE GAUGE

AutoCAD SHX Text

AUDIO/VISUAL

AutoCAD SHX Text

BELOW FINISHED FLOOR

AutoCAD SHX Text

BELOW FINISHED GRADE

AutoCAD SHX Text

BOTTOM OF FIXTURE

AutoCAD SHX Text

ELECTRICAL METALLIC TUBING

AutoCAD SHX Text

EQUIPMENT GROUND

AutoCAD SHX Text

CIRCUIT

AutoCAD SHX Text

COPPER

AutoCAD SHX Text

ELECTRICAL

AutoCAD SHX Text

CONDUIT

AutoCAD SHX Text

BREAKER

AutoCAD SHX Text

BUILDING

AutoCAD SHX Text

ALTERNATING CURRENT

AutoCAD SHX Text

ABOVE FINISHED FLOOR

AutoCAD SHX Text

ABOVE FINISHED GRADE

AutoCAD SHX Text

ABOVE RAISED FLOOR

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

AMPERES

AutoCAD SHX Text

ALUMINUM

AutoCAD SHX Text

TVSS

AutoCAD SHX Text

TRANSIENT VOLTAGE SURGE SUPPRESSION

AutoCAD SHX Text

POS

AutoCAD SHX Text

POINT OF SALE

AutoCAD SHX Text

INTERCOM

AutoCAD SHX Text

PAF

AutoCAD SHX Text

PAINT AFTER FABRICATION

AutoCAD SHX Text

WPWIU

AutoCAD SHX Text

WEATHERPROOF-WHILE-IN-USE

AutoCAD SHX Text

AHJ

AutoCAD SHX Text

AUTHORITY HAVING JURISDICTION

AutoCAD SHX Text

CEILING MOUNTED COMBINATION HORN/STROBE

AutoCAD SHX Text

CEILING MOUNTED ALARM STROBE

AutoCAD SHX Text

MONITOR MODULE

AutoCAD SHX Text

BACS

AutoCAD SHX Text

BUILDING AUTOMATION CONTROL SYSTEM

AutoCAD SHX Text F

AutoCAD SHX Text

CPENTID

AutoCAD SHX Text

CPENTID

AutoCAD SHX Text

CPENTID

AutoCAD SHX Text

NOTE: ALL SYMBOLS ARE NOT NECESSARILY USED ON THIS PROJECT

AutoCAD SHX Text

(MOUNT 5" ABOVE BACKSPLASH TO CENTER)

AutoCAD SHX Text

DUPLEX RECEPTACLE OUTLET

AutoCAD SHX Text

QUADPLEX RECEPTACLE OUTLET

AutoCAD SHX Text

SIMPLEX RECEPTACLE OUTLET

AutoCAD SHX Text

250V, TWIST LOCK, L6-20R RECEPTACLE OUTLET

AutoCAD SHX Text C

AutoCAD SHX Text

CPENTID

AutoCAD SHX Text

CPENTID

AutoCAD SHX Text

CLOCK OUTLET

AutoCAD SHX Text

RE: FIXTURE SCHEDULE

AutoCAD SHX Text

LOW VOLTAGE

AutoCAD SHX Text

PILOT LIGHT

AutoCAD SHX Text

THREE WAY WALL SWITCH

AutoCAD SHX Text

FOUR WAY WALL SWITCH

AutoCAD SHX Text

MANUAL MOTOR STARTER

AutoCAD SHX Text

LOW VOLTAGE SWITCH

AutoCAD SHX Text

LIGHTING FIXTURE, RECESSED IN CEILING, UNO

AutoCAD SHX Text

STRIP LIGHTING FIXTURE

AutoCAD SHX Text

LIGHTING FIXTURE WALL MOUNTED

AutoCAD SHX Text

LIGHTING FIXTURE WALL MOUNTED

AutoCAD SHX Text

LIGHTING FIXTURE CEILING MOUNTED

AutoCAD SHX Text

EMERGENCY WALL PACK FIXTURE

AutoCAD SHX Text

EXIT LIGHT WALL MOUNTED 8'-0" AFF TO CENTER, UNO

AutoCAD SHX Text

SINGLE POLE, SINGLE THROW WALL SWITCH

AutoCAD SHX Text

DOUBLE POLE, SINGLE THROW WALL SWITCH

AutoCAD SHX Text

NUMBER WITHIN OR ADJACENT TO FIXTURE INDICATES FIXTURE TYPE.

AutoCAD SHX Text

LIGHTING FIXTURE ON EMERGENCY OR STANDBY POWER SOURCE

AutoCAD SHX Text

LIGHTING FIXTURE RECESSED, SURFACE OR PENDANT MOUNTED, UNO

AutoCAD SHX Text

LIGHTING FIXTURE ON EMERGENCY OR STANDBY POWER SOURCE

AutoCAD SHX Text

SHADED AREA(S) INDICATE ILLUMINATED FACE(S)

AutoCAD SHX Text

EXIT LIGHT CEILING MOUNTED

AutoCAD SHX Text

MOUNT 46" AFF TO CENTER, UNO

AutoCAD SHX Text

WEATHERPROOF (IN USE) (CAST METAL)

AutoCAD SHX Text

EXPLOSIONPROOF

AutoCAD SHX Text

COUNTER TOP MOUNTED

AutoCAD SHX Text

(MOUNT 5" ABOVE BACKSPLASH TO CENTER)

AutoCAD SHX Text

MOUNT 18" AFF TO CENTER, UNO

AutoCAD SHX Text

GROUND FAULT CIRCUIT INTERRUPTER

AutoCAD SHX Text

OCCUPANCY SENSOR WALL SWITCH

AutoCAD SHX Text

POLE MOUNTED LIGHTING FIXTURE

AutoCAD SHX Text

WALLWASH LIGHTING FIXTURE. OPEN SIDE INDICATES DIRECTION

AutoCAD SHX Text

PRESET LIGHTING CONTROL ENTRY SWITCH

AutoCAD SHX Text

EXPLOSIONPROOF

AutoCAD SHX Text

SURGE PROTECTED

AutoCAD SHX Text

ISOLATED GROUND

AutoCAD SHX Text

COUNTER TOP MOUNTED

AutoCAD SHX Text

WEATHERPROOF (IN USE) (CAST METAL)

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

SUBSCRIPTS:

AutoCAD SHX Text

GFI

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text

RECEPTACLES

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text K

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text D

AutoCAD SHX Text

DIMMER SWITCH

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text P

AutoCAD SHX Text C

AutoCAD SHX Text

SWITCHES

AutoCAD SHX Text

SUBSCRIPTS:

AutoCAD SHX Text

AutoCAD SHX Text E1

AutoCAD SHX Text

CPENTID

AutoCAD SHX Text X1

AutoCAD SHX Text

OF ILLUMINATION.

AutoCAD SHX Text

CPENTID

AutoCAD SHX Text

CPENTID

AutoCAD SHX Text

CPENTID

AutoCAD SHX Text

LIGHTING

AutoCAD SHX Text

PROVIDE MATCHING PIGTAIL FOR EACH OUTLET SHOWN ON DRAWINGS.

AutoCAD SHX Text

SIMPLEX FLOOR OUTLET

AutoCAD SHX Text

DUPLEX FLOOR OUTLET

AutoCAD SHX Text

QUADPLEX FLOOR OUTLET

AutoCAD SHX Text

COMMUNICATIONS

AutoCAD SHX Text

FLOOR TELEPHONE OUTLET

AutoCAD SHX Text

125/250V, NEMA 14-50R RECEPTACLE MOUNTED 36" AFF, UNO.

AutoCAD SHX Text

SPECIAL PURPOSE FLOOR OUTLET, RE: PLANS

AutoCAD SHX Text

COMBINATION TELEPHONE/DATA OUTLET. (3) CAT 6 CABLES, 0.75" C.

AutoCAD SHX Text

FLOOR COMBINATION TELEPHONE/DATA OUTLET

AutoCAD SHX Text

ACCESS FLOOR SERVICE MODULE - POWER ONLY

AutoCAD SHX Text

ACCESS FLOOR SERVICE MODULE - POWER AND COMMUNICATIONS

AutoCAD SHX Text

WALL MOUNT TELEPHONE AT 54" AFF TO CENTER, UNO. 1 CAT 6 CABLE.

AutoCAD SHX Text W

AutoCAD SHX Text

DATA OUTLET

AutoCAD SHX Text

FLOOR DATA OUTLET

AutoCAD SHX Text

TELEPHONE OUTLET

AutoCAD SHX Text

CPENTID

AutoCAD SHX Text

LOW VOLTAGE MOMENTARY CONTACT SPDT, CENTER OFF, KEY SWITCH.

AutoCAD SHX Text

WITH STANLESS STEEL COVERPLATE.

AutoCAD SHX Text

KEY SWITCH. LEVITON #122*-2KL SERIES OR APPROVED EQUAL

AutoCAD SHX Text S

AutoCAD SHX Text

LV/K

AutoCAD SHX Text

STRIP LIGHTING FIXTURE

AutoCAD SHX Text

STRIP LIGHTING FIXTURE ON EMERGENCY OR STANDBY POWER SOURCE

AutoCAD SHX Text

DIGITAL TIMER SWITCH

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text

DAMP LOCATION FLIPCOVER

AutoCAD SHX Text

WITH SPECIFIED CABLING ROUTED TO NEAREST TELEPHONE ROOM, UNO

AutoCAD SHX Text

GANG DEVICE RING FLUSH MTD 18" AFF TO CENTER AND 1" CONDUIT

AutoCAD SHX Text

PROVIDE 4" SQUARE, 2-1/8" DEEP BOX WITH APPROPRIATE SINGLE-

AutoCAD SHX Text E-001

AutoCAD SHX Text

LEGEND AND ABBREVIATIONS

AutoCAD SHX Text

AFSM

AutoCAD SHX Text

ACCESS FLOOR SERVICE MODULE

info@haeinc.com Ph (405) 801-2528 Fax (405) 801-2529 Certificate of Authorization No. CA 3520, Expires 6/30/2017

03-27-17

AutoCAD SHX Text

JAN.

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text G

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

ROOF HATCH

AutoCAD SHX Text

AN-WALL-HEAD

AutoCAD SHX Text

AN-WALL

AutoCAD SHX Text

AN-DOOR

AutoCAD SHX Text S

AutoCAD SHX Text b

AutoCAD SHX Text D

AutoCAD SHX Text f

AutoCAD SHX Text D

AutoCAD SHX Text S

AutoCAD SHX Text s

AutoCAD SHX Text f

AutoCAD SHX Text b

AutoCAD SHX Text

AutoCAD SHX Text b

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text f

AutoCAD SHX Text S

AutoCAD SHX Text f

AutoCAD SHX Text S

AutoCAD SHX Text b

AutoCAD SHX Text S

AutoCAD SHX Text D

AutoCAD SHX Text s

AutoCAD SHX Text b

AutoCAD SHX Text f

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text b

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text f

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text f

AutoCAD SHX Text S

AutoCAD SHX Text b

AutoCAD SHX Text S

AutoCAD SHX Text D

AutoCAD SHX Text s

AutoCAD SHX Text b

AutoCAD SHX Text f

AutoCAD SHX Text S

AutoCAD SHX Text b

AutoCAD SHX Text f

AutoCAD SHX Text S

AutoCAD SHX Text s

AutoCAD SHX Text f

AutoCAD SHX Text b

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text b

AutoCAD SHX Text f

AutoCAD SHX Text S

AutoCAD SHX Text s

AutoCAD SHX Text f

AutoCAD SHX Text b

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text b

AutoCAD SHX Text e

AutoCAD SHX Text S

AutoCAD SHX Text s

AutoCAD SHX Text b

AutoCAD SHX Text S

AutoCAD SHX Text f

AutoCAD SHX Text D

AutoCAD SHX Text b

AutoCAD SHX Text f

AutoCAD SHX Text b

AutoCAD SHX Text f

AutoCAD SHX Text S

AutoCAD SHX Text f

AutoCAD SHX Text S

AutoCAD SHX Text b

AutoCAD SHX Text S

AutoCAD SHX…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 14, 2017.