Drawings 02_2004 PEMB.pdf

This is a set of structural design and construction drawings for a metallic building produced by Metallic Building Company, dated January 8, 2004. The drawings serve as detailed construction documentation for a pre-engineered metal building structure approximately 120 feet wide with multiple bays and braced frames.

The drawings include comprehensive structural details covering anchor bolt setting plans, roof framing plans with bolt connections at specified lines, base plate details with varying configurations for corner and interior columns, framed opening schedules, sidewall and endwall elevations with sheeting specifications, cross-sections, and standard connection details. Key structural components depicted include 120-foot cold-formed steel members, hot-rolled steel base materials conforming to ASTM specifications, self-drilling fasteners with specific terminology and drilling parameters, and various trim and lap details for metallic connections. The documentation provides installation procedures for components such as wall panels, roof panels, door and window framing assemblies, gutters and downspout attachments, and ridge tie installations. Material properties, fabrication specifications, and field assembly instructions are included throughout. The drawings reference compliance with industry standards including the American Iron and Steel Institute, American Welding Society structural welding code, and applicable building codes. All structural elements are designed and detailed to facilitate field assembly by contractors, with emphasis on proper alignment, fastening sequences, and load transfer mechanisms at critical connection points.