Draft Pre-Solicitation - W9115125QA035.pdf

DRAFT

WOMEN-OWNED SMALL

BUSINESS (WOSB)

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NUMBER 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect 8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NUMBER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

REQUEST

FOR QUOTE

(RFQ)

INVITATION

FOR BID

(IFB)

REQUEST

FOR

PROPOSAL

(RFP)

SEE ADDENDUM

19.

ITEM NUMBER

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Government Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH

AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND

ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS

SPECIFIED

29. AWARD OF CONTRACT: REFERENCE OFFER

DATED . . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITION IS UNRESTRICTED OR

NORTH AMERICAN

INDUSTRY CLASSIFICATION

STANDARD (NAICS):

SIZE STANDARD:

13a. THIS CONTRACT IS A

RATED ORDER UNDER

THE DEFENSE PRIORITIES

AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

SET ASIDE: % FOR:

11. DELIVERY FOR FREE ON

BOARD (FOB) DESTINATION

UNLESS BLOCK IS MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3

AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

8(A)

ECONOMICALLY

DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30.

calls)

Created On:

13 Jan 2026, 13:05 PM Central Standard Time

Solicitation/Contract Form Continuation

Laundry and Dry-Cleaning Re-competeInstrument Name:

W9115125QA035

Continuation of Supplies or Services and Prices/Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price

Amount

Option Line Item

Laundry (linen Items, special Items, and Sleeping systems) Pricing Arrangement: Firm Fixed Price

12 Months

Option Line Item

Dry-Cleaning (chaplain vestments, ceremonial uniforms, and other) Pricing Arrangement: Firm Fixed Price

12 Months

Option Line Item

Laundry (linen Items, special Items, and Sleeping systems) Pricing Arrangement: Firm Fixed Price

12 Months

Option Line Item

Dry-Cleaning (chaplain vestments, ceremonial uniforms, and other) Pricing Arrangement: Firm Fixed Price

12 Months

Option Line Item

Laundry (linen Items, special Items, and Sleeping systems) Pricing Arrangement: Firm Fixed Price

12 Months

Option Line Item

Dry-Cleaning (chaplain vestments, ceremonial uniforms, and other) Pricing Arrangement: Firm Fixed Price

12 Months

Option Line Item

Laundry (linen Items, special Items, and Sleeping systems) Pricing Arrangement: Firm Fixed Price

12 Months

Option 12 Months

Line Item

Dry-Cleaning (chaplain vestments, ceremonial uniforms, and other) Pricing Arrangement: Firm Fixed Price

Option Line Item

Laundry (linen Items, special Items, and Sleeping systems) Pricing Arrangement: Firm Fixed Price

12 Months

Option Line Item

Dry-Cleaning (chaplain vestments, ceremonial uniforms, and other) Pricing Arrangement: Firm Fixed Price

12 Months

Continuation of Description

This is a non-personnel services contract to provide Laundry and Dry-Cleaning services. The Contractor shall operate and manage the Laundry Distribution and Collection Point(s) for the issue, receipt, requisition, exchange, warehousing, and turn-in of linens IAW AR 210-130, Laundry and Dry-Cleaning Operations; AR 710-4, Property Accountability; and other regulatory requirements. Timely and accurate submission of deliverables is essential, and all linens must be thoroughly cleaned, properly folded and bundled, and free of damage. The contractor is also responsible for cleaning specialty items like sleep systems, ensuring they meet specific standards for cleanliness and condition.

*** END OF NARRATIVE 1 ***

Option Line Item 0001 Product Service Code : S209 North American Industry Classification System (NAICS) : 812332

Option Line Item 0002 Product Service Code : S209 North American Industry Classification System (NAICS) : 812332

Option Line Item 1001 Product Service Code : S209 North American Industry Classification System (NAICS) : 812332

Option Line Item 1002 Product Service Code : S209 North American Industry Classification System (NAICS) : 812332

Option Line Item 2001 Product Service Code : S209 North American Industry Classification System (NAICS) : 812332

Option Line Item 2002 Product Service Code : S209 North American Industry Classification System (NAICS) : 812332

Option Line Item 3001 Product Service Code : S209 North American Industry Classification System (NAICS) : 812332

Option Line Item 3002 Product Service Code : S209

North American Industry Classification System (NAICS) : 812332

Option Line Item 4001 Product Service Code : S209 North American Industry Classification System (NAICS) : 812332

Option Line Item 4002 Product Service Code : S209 North American Industry Classification System (NAICS) : 812332

Continuation of Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement (PWS).

DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN

FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement (PWS).

DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN

FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement (PWS).

DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN

FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement (PWS).

DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN

FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement (PWS).

DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN

FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement (PWS).

DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN

FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement (PWS).

DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN

FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement (PWS).

DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN

FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement (PWS).

DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN

FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement (PWS).

DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN

FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Continuation of Deliveries or Performance

Option Line Item

Delivery Schedule 12 MonthsMonthly 195386 Month

12 MonthsQuantity

Address and POC Place of Performance DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Period of Performance From 01 Apr 2026 To 31 Mar 2027

Option Line Item

Delivery Schedule 12 MonthsMonthly 195386 Month

12 MonthsQuantity

Address and POC Place of Performance DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Period of Performance From 01 Apr 2026 To 31 Mar 2027

Option Line Item

Delivery Schedule 12 MonthsMonthly 195386 Month

12 MonthsQuantity

Address and POC Place of Performance DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Period of Performance From 01 Apr 2027 To 31 Mar 2028

Option Line Item

Delivery Schedule 12 MonthsMonthly 195386 Month

12 MonthsQuantity

Address and POC Place of Performance DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Period of Performance From 01 Apr 2027 To 31 Mar 2028

Option Line Item

Delivery Schedule 12 MonthsMonthly 195386 Month

12 MonthsQuantity

Address and POC Place of Performance DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Period of Performance From 01 Apr 2028 To 31 Mar 2029

Option Line Item

Delivery Schedule 12 MonthsMonthly 195386 Month

2002 12 MonthsQuantity

Address and POC Place of Performance DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Period of Performance From 01 Apr 2028 To 31 Mar 2029

Option Line Item

Delivery Schedule 12 MonthsMonthly 195386 Month

12 MonthsQuantity

Address and POC Place of Performance DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Period of Performance From 01 Apr 2029

To 31 Mar 2030

Option Line Item

Delivery Schedule 12 MonthsMonthly 195386 Month

12 MonthsQuantity

Address and POC Place of Performance DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Period of Performance From 01 Apr 2029 To 31 Mar 2030

Option Line Item

Delivery Schedule 12 MonthsMonthly 195386 Month

12 MonthsQuantity

Address and POC Place of Performance DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Period of Performance From 01 Apr 2030 To 31 Mar 2031

Option Line Item

Delivery Schedule 12 MonthsMonthly 195386 Month

12 MonthsQuantity

Address and POC Place of Performance DoDAAC: W90JVM CountryCode: USA

W6YR USALRCTR FT HOOD

LRC PBO, BLDG 89013 QUARTERMASTER LN FORT HOOD, TX 76544

UNITED STATES

Bullock Mark Email: mark.a.bullock4.civ@army.mil

Period of Performance From 01 Apr 2030 To 31 Mar 2031

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.204-13 System for Award Management Maintenance.

2018-10

52.204-18 Commercial and Government Entity Code Maintenance.

2020-08

52.204-21 Basic Safeguarding of Covered Contractor Information Systems.

2021-11

52.212-4 Contract Terms and Conditions- Commercial Products and Commercial Services.

2023-11

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials.

2011-09

252.203-7002 Requirement to Inform Employees of Whistleblower Rights.

2022-12

252.204-7004 Antiterrorism Awareness Training for Contractors.

2023-01

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

2024-05

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications

2023-01

Equipment or Services.

252.204-7020 NIST SP 800-171 DoD Assessment Requirements.

2023-11

252.225-7012 Preference for Certain Domestic Commodities.

2022-04

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime.

2023-01

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

2023-06

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.

2018-12

252.232-7010 Levies on Contract Payments. 2006-12

252.244-7000 Subcontracts for Commercial Products or Commercial Services.

2023-11

252.247-7023 Transportation of Supplies by Sea. 2024-10

DFARS Clauses Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

252.211-7003 Item Unique Identification and Valuation.

2023-01

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause-

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code;

enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH

10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary;

and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall-

(A) Determine whether to-

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number;

DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ____, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

252.232-7006 Wide Area WorkFlow Payment Instructions.

2023-01

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web- Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice 2 in 1

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

Invoice 2 in 1

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC HQ0490 Issue By DoDAAC W91151 Admin DoDAAC W91151 Inspect By DoDAAC W90JVM Ship To Code W90JVM Ship From Code ____ Mark For Code ____ Service Approver (DoDAAC) W90JVM Service Acceptor (DoDAAC) W90JVM Accept at Other DoDAAC ____ LPO DoDAAC ____ DCAA Auditor DoDAAC ____ Other DoDAAC(s) ____ (*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

mark.a.bullock4.civ@army.mil

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

Addendum to 52.212-4, Contract Terms and Conditions - Commercial Products and Commercial Services

INSPECTION/ACCEPTANCE

1. The Contractor shall provide a Quality Control Program (QCP) acceptable to the Government covering the services under this contract. Complete records of all inspected work performed by the Contractor shall be maintained and made available to the Government during contract performance and for contract length.

2. The Government has the right to inspect all services called for by the contract, to the extent practicable at all times and places during the term of the contract. The Government shall perform inspections and tests in a manner that will not unduly delay the work.

3. If the Government performs inspections on the premises of the Contractor or a subcontractor, the Contractor shall furnish, and shall require subcontractors to furnish, at no increase in contract price, all reasonable facilities and assistance for the safe and convenient performance of these duties.

4. If the Contractor fails to promptly perform the services again or to take the necessary action to ensure future performance in conformity with contract requirements, the Government may (1) by contract or otherwise, perform the services and charge to the Contractor any cost incurred by the Government that is directly related to the performance of such service or (2) terminate the contract for default.

GENERAL INFORMATION

1. The Government guarantees a contract minimum of pieces which will be [insert minimum] obligated with the issuance of the first Task Order.

Prices as established per piece and based on fully burdened rates. The burdened rates include but are not limited to: Expenses and Profits.

2. The Contract Maximum Value for the five (5) year ordering period to include FAR 52.217-8 will be established at time of award. The contractor is not guaranteed the Contract Maximum Value.

3. Pricing Matrix. Offerors shall prepare pricing information utilizing the format provided - Pricing Matrix (attached). The pricing information must, contain pricing for each line item identified (as required) as well as total price and be signed and dated by the offeror. All interested offerors are required to use this form in their proposal submission.

INVOICING INSTRUCTIONS

1. The Contractor shall submit invoices against the Task Order(s) on a monthly (30 day) basis, unless otherwise specified by the Contracting Officer or agreed to by the parties. The Contractor's invoice amount shall reflect the quantity of acceptable pieces delivered for the month under each CLIN/SubCLIN contained in the Task Orders.

2. For pieces requiring cleaning and or rework, that cross calendar months, they shall be invoiced on the following month once items have been accepted.

3. The contractor shall submit proper invoices in accordance with FAR 52.212-4.

4. Payment of Invoices. The contractor shall provide the proper invoice and receiving report in accordance with DFARS clause 252.232-7003 "Electronic Submission of Payment Requests".

Payment will be made by the payment office designated in the individual Task Order. The Government payment office will not make disbursement to the Contractor without evidence of receipt and acceptance, or certification, of the items invoiced from the COR or other government representatives as indicated in the individual Task Order.

5. Contractor's failure to comply with the instructions above will render the invoice as improper, and resubmission of the invoice will be required in order to obtain invoice payment.

*** END OF NARRATIVE 1 ***

Contract Terms and Conditions Required To Implement Statutes or Executive Orders — Commercial Products and Commercial Services

FAR Clauses Incorporated by Full Text

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders- Commercial Products and Commercial Services.

2025-10

Contract Terms and Conditions Required To Implement Statutes or Executive Orders- Commercial Products and Commercial Services (Oct 2025)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

[ ] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

[ ] (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C.

3509)).

[ ] (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

[ ] (4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712);

this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

[X] (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

[ ] (6) [Reserved].

[ ] (7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

[ ] (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

[X] (9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

[ ] (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) (Pub. L. 115-390, title II).

[ ] (11)

(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Dec 2023) (Pub. L. 115-390, title II).

[ ] (ii) Alternate I (Dec 2023) of 52.204-30.

[X] (12) 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Jan 2025) (31 U.S.C. 6101 note).

[X] (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

[ ] (14) [Reserved].

[ ] (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) (15 U.S.C.

657a).

[ ] (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

[ ] (17) [Reserved]

[ ] (18)

(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

[ ] (ii) Alternate I (Mar 2020) of 52.219-6.

[ ] (19)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

[ ] (ii) Alternate I (Mar 2020) of 52.219-7.

[ ] (20) 52.219-8, Utilization of Small Business Concerns (Jan 2025)(15 U.S.C. 637(d)(2) and

(3)).

[ ] (21)

(i) 52.219-9, Small Business Subcontracting Plan (Jan 2025) (15 U.S.C. 637(d)(4)).

[ ] (ii) Alternate I (Nov 2016) of 52.219-9.

[ ] (iii) Alternate II (Nov 2016) of 52.219-9.

[ ] (iv) Alternate III (Jun 2020) of 52.219-9.

[ ] (v) Alternate IV (Jan 2025) of 52.219-9.

[ ] (22)

(i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

[ ] (ii) Alternate I (Mar 2020) of 52.219-13.

[ ] (23) 52.219-14, Limitations on Subcontracting (Oct 2022) (15 U.S.C. 657s).

[ ] (24) 52.219-16, Liquidated Damages-Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4) (F)(i)).

[ ] (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (Feb 2024) (15 U.S.C. 657f).

[ ] (26)

(i) 52.219-28, Postaward Small Business Program Rerepresentation (Jan 2025) (15 U.S.C.

632(a)(2)).

[ ] (ii) Alternate I (Mar 2020) of 52.219-28.

[ ] (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)).

[ ] (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15 U.S.C. 637(m)).

[ ] (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.

S.C. 644(r)).

[ ] (30) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15 U.S.C. 637(a)(17)).

[X] (31) 52.222-3, Convict Labor (Jun 2003) (E.O. 11755).

[X] (32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2025)(E.O.

13126).

[ ] (33) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

[ ] (34)

(i) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

[ ] (ii) Alternate I (Feb 1999) of 52.222-26.

[X] (35)

(i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

[ ] (ii) Alternate I (Jul 2014) of 52.222-35.

[X] (36)

(i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

[ ] (ii) Alternate I (Jul 2014) of 52.222-36.

[X] (37) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

[X] (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

[X] (39)

(i) 52.222-50, Combating Trafficking in Persons (Oct 2025) (22 U.S.C. chapter 78 and E.O.

13627).

[ ] (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

[X] (40) 52.222-54, Employment Eligibility Verification (Jan 2025) (Executive Order 12989).

(Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

[ ] (41)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ] (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ] (42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (May 2024) (42 U.S.C. 7671, et seq.).

[ ] (43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (May 2024) (42 U.S.C. 7671, et seq.).

[ ] (44) 52.223-20, Aerosols (May 2024) (42 U.S.C. 7671, et seq.).

[ ] (45) 52.223-21, Foams (May 2024) (42 U.S.C. 7671, et seq.).

[ ] (46) 52.223-23, Sustainable Products and Services (May 2024) (E.O. 14057, 7 U.S.C.

8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

[ ] (47)

(i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

[ ] (ii) Alternate I (Jan 2017) of 52.224-3.

[ ] (48)

(i) 52.225-1, Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

[ ] (ii) Alternate I (Oct 2022) of 52.225-1.

[ ] (49)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) (19 U.S.C.

3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C.

chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

[ ] (ii) Alternate I [Reserved].

[ ] (iii) Alternate II (Jan 2025) of 52.225-3.

[ ] (iv) Alternate III (Feb 2024) of 52.225-3.

[ ] (v) Alternate IV (Oct 2022) of 52.225-3.

[ ] (50) 52.225-5, Trade Agreements (NOV 2023) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

[X] (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

[ ] (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

[ ] (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C.

5150).

[ ] (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

[X] (55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) (E.O. 13513).

[ ] (56) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

[ ] (57) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

[ ] (58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

[X] (59) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) (31 U.S.C. 3332).

[ ] (60) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

[ ] (61) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

[ ] (62) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

[X] (63) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Nov 2024) (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).

[X] (64) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d) (13)).

[ ] (65)

(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631).

[ ] (ii) Alternate I (Apr 2003) of 52.247-64.

[ ] (iii) Alternate II (Nov 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

[X] (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter67).

[X] (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C.

206 and 41 U.S.C. chapter 67).

[X] (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

[ ] (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.C. chapter 67).

[ ] (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

[ ] (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C.