Doorking_1601_PS-8 11 25~1.pdf
PDF 2 MB Posted
- Attached to
- ARC SECURITY GATE ENHANCEMENTS
- Solicitation number
- S-24800-00014644
- Issued by
- Marion County, Oregon
About this file
This document set contains technical specifications and layout diagrams for the OMD Security Enhancement Project, focusing on gate and access control equipment for a facility with a guard shack. The project involves installing a DoorKing Model 1601 barrier gate with a 10-foot arm, a reflective photo eye, and a PBS-3 three-button control station. The gate is designed for single lane vehicular control in high-traffic applications, with features including electronic limit settings, a 90-degree arm rotation in approximately 2.5 seconds, and a G90 galvanized steel housing. The equipment is rated for operation between 10°F to 140°F and is certified to CAN/CSA C22.2 NO. 247 and ANSI/UL-325 standards.
The technical specifications detail specific equipment requirements, including a 1/2 HP continuous duty AC motor, various voltage input options (115 VAC, 230 VAC, 460 VAC), and multiple arm type configurations. The project layout includes provisions for entry and exit lanes, with equipment positioned near a guard shack. Wiring specifications are provided, emphasizing proper grounding, wire sizing, and voltage drop considerations. Additional components include an optical monitoring device (OMD) with features like multiple monitoring methods, surge protection, and a wide operating temperature range. The documentation appears to be a comprehensive technical guide for implementing a security access control system with precise equipment and installation requirements.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FEATURES
• DESIGNED FOR SINGLE LANE (14 FT MAXIMUM)
VEHICULAR CONTROL IN HIGH TRAFFIC
APPLICATIONS
• ELECTRONIC LIMIT SETTINGS
• ARM ROTATES 90° IN APPROXIMATELY 2.5
SECONDS
• G90 GALVANIZED STEEL HOUSING
• FAIL-SECURE MECHANICAL RELEASE METHOD
• LEFT- OR RIGHT-HAND MOUNT
• 360° GEAR BOX ROTATION BEFORE THE MOTOR
CHANGES DIRECTION.
• ARM ROTATES 90° IN APPROXIMATELY 2.5
SECONDS
• G90 GALVANIZED STEEL HOUSING
• FAIL-SECURE MECHANICAL RELEASE METHOD
• LEFT- OR RIGHT- HAND MOUNT
• 360° GEAR BOX ROTATION BEFORE THE MOTOR
CHANGES DIRECTION.
• TEMPERATURE:10°F to 140°F (-12°C to 62°C)
CLASS
CERTIFIED TO
CAN/CSA C22.2 NO. 247
ANSI/UL-325
CONFORMS TO
VEHICULAR GATE OPERATOR
HP
53382
MODEL
SERIAL
VOLTS PHASE
AMPS 60 Hz
MAX GATE LOAD
DoorKing, Inc., Inglewood, CA
MOVING ARM
cause vehicle damage, can serious injury or death.
STAY
at all times.
CLEAR of arm
NO:
Bicycles Pedestrians
Motorcycles
WARNING
15”
41.1” 34.5”
14.5”
10.8”
Moving Gate Can Cause Serious Injury or Death KEEP CLEAR! Gate may move at any time without prior warning.
Do not let children operate the gate or play in the gate area.
This entrance is for vehicles only.
Pedestrians must use separate entrance.
Housing & Arm Cover 21”
CLASS OF OPERATION
ARM TYPE/MAX LENGTH
(ARMS ARE SOLD SEPARATELY)
MODEL
II, III, IV
Plastic / 12 ft (3.6 m) Wood / 14 ft (4.3 m)
Round Aluminum / 14 ft (4.3 m) Octagonal Aluminum / 14 ft (4.3 m)
MOTOR
INPUT
OPTIONS Convenience Open Package2
Heater and Fan Kits Folding Arm Kits5
Breakaway Arm Kit3
Octagonal Lighted Signal Arm 2-Piece Arm Kit4
115 VAC, 60 Hz, 5.4A 230 VAC, 60 Hz, 2.7A1
460 VAC, 60 Hz, 1.4A1
1/2 HP • Continuous Duty • AC Motor
OMD Security Enhancement Project:
1522924659.NFG
Highlight
1522924659.NFG
Highlight
Never run low voltage rated wire insulation in the same conduit as high voltage rated wire insulation.
Model Type
Voltage Required
Amps Required
Wire Size / Max Distance in Feet
115 5.7 170 275 460 690
12 AWG 10 AWG 8 AWG 6 AWG
1601 - 1/2 HP
115 9.7 100 162 270 4051602 - 1 HP
WIRING
Before attempting to connect any wiring to the operator, be sure that the circuit breaker in the electrical panel is in the OFF position. Permanent wiring must be installed to the operator as required by local electrical codes. It is recommended that a licensed electrical contractor perform this work.
Since building codes vary from city to city, we highly recommend that you check with your local building department prior to installing any permanent wiring to be sure that all wiring to the operator (both high and low voltage) complies with local code requirements.
THIS GATE OPERATOR MUST BE PROPERLY GROUNDED!!
2.1 High Voltage Wire Runs
The distance shown in the chart is measured in “Feet” from the operator to the power source. If power wiring is greater than the maximum distance shown, it is recommended that a service feeder be installed. When large gauge wire is used, a separate junction box must be installed for the operator connection. The wire table is based on stranded copper wire. Wire run calcula-tions are based on the NEC recommended maximum 3% voltage drop on the power line, plus an additional 10% reduction in distance to allow for other losses in the system.
This table illustrates the high voltage AC power wire size and distance limitations.
OMD Ft. Oregon Security Enhancement Project:
OMD Security Enhancement Project:
1522924659.NFG
Highlight
,-----,--.-----------------DIMS. Pel< SIT!: LAYOUT------------------t-----i
LOOP TO 61: CONTINUOUS Ll:NGTH OF Wll<e W/0 ANY 61<1:AKS 01< SPLICl:S
Ye' TO¼" SAW SLOT
!<!:MOVE: SHAl<P INSIDI: COl<Nl:l<S
QSeAL SeALANT TO 61: APPLll:D ON CLeAN SUl<FACI:
LOOP Wll<l:S [:2] WAAPS SHOWN Wll<l:S MUST LAY FLAT ON TOP OF
Pl<l:VIOUS TUl<N
H1/8"T01/4'
-LOOP Wll<I: SPl:C:
14GA 19STI< 600V XLP INSULATl:D OAANGe PVC-POLYVINYL CHLOl<IDI: TU61:.
-NUM61:I< OF WAAPS 6ASl:D ON LOOP size [3] WAAPS FOi< LOOP l='el<IMl:Tl:l<S 14'-:26' [:2] WAAPS FOi< LOOP Pl:l<IMl:Tel<S :27-80'
-see eLeCTl<ICAL LAYOUT FOi< SIT!:
SPl:CIFIC LOOP size AND LOCATION
Wll<e TO 61: TWISTl:D A MIN. OF 6 TUl<NS Pel< FOOT Fl<OM THI: !:ND OF THI: FeeDel< SLOT TO THI: l:XPANSION 60Al<D.
ALL SPLICl:S TO 61: SOLDl:1<1:D AND Pl<OTl:CTl:D WITH MOISTUl<e Pl<OOF SeAL.
OMD Security Enhancement Project:
FEATURES:
Operating Range:
5 (1.5 m) to 60 ft (18.3 m)
Power:
6-40 VDC, 12-24 VAC
Temperature Range:
-30° to 140°F (-34° to 60°C)
Current (NC and 10K Monitoring Methods) 50 mA DC (relay activated)
Current (Pulse Monitoring Methods) 15 mA DC
Resistive Termination 10K ohm across NO contact (switch selectable) Surge Protection
Thermal fuse, MOV Relay Output Operation
Light ON/Dark ON Response Time
250ms Environmental
NEMA 4X
Dimensions (L x W x H)
5.1” (130 mm) x 3.15” (80 mm) x 5.5” (140 mm) Ball Joint Mount Conduit Thread
½ Inch NPT
• NORMALLY CLOSED
• 10K RESISTIVE TERMINATION
• 2-WIRE PULSE (2 FREQUENCY)
• 2-WIRE PULSE (3 FREQUENCY)
• 4-WIRE PULSE (2 FREQUENCY)
• 4-WIRE PULSE (3 FREQUENCY)
UL325 MONITORING METHODS
OMD Security Enhancement Project
KNOCKOUT
HOLES
o NEMA 1 o SURFACE MOUNT o FULLY GUARDED o THREE BUTTON CONTROL
(OPEN-CLOSE-STOP) IN METAL
ENCLOSURE
o BUTTON: 5 amp @ 120VAC o 240VAC MAX GENERAL PURPOSE o OPEN: NORMALLY OPEN o CLOSE: NORMALLY OPEN o STOP: NORMALLY CLOSED o UL LISTED
230 Route 206, Suite 206
Flanders, NJ 07836
(800) 942-6682 * (973) 584-6682 Fax info@mmtcinc.com
5”
2-3/8”
PBS-3
CONTROL STATION
DIMENSIONS
WIRING
2-3/8”
2”
1-1/8”
7/8”
1-13/16”
OPEN
CLOSE
STOP
“OPEN”
COMMAND
“CLOSE”
COMMAND
CONTROL CIRCUIT
POWER
CONTROL CIRCUIT
COMMON
OMD Security Enhancement Project:
GUARD SHACK
1601 BARRIER GATE
WITH 10’ ARM
FOR REFERENCE ONLY
EQUIPMENT LOCATIONS
ARE TBD.
REFLECTIVE
PHOTO EYE
DOWN LOOP
(4’ x 8’)
(P U
B
LI
C S
ID
E
(SE
C U
R E
SID
E
ENTRY
EXIT
OMD Security Enhancement Project:
GUARD SHACK
2 - 3/4” TO 3-BUTTON STATION LOCATION & ELECT PANEL. (P
U
B
LI
C S
ID
E
(SE
C U
R E
SID
E
ENTRY
EXIT
OMD Security Enhancement Project:
| Cover Page |
| Doorking 1601 |
| Wiring |
| Sawcut Loop |
| IRB-RET2 |
| Doorking Traffic Spikes |
| Doorking Speed Bump |
| Concrete |
| Doorking Warning Sign |
| 3-Button Station |
| Equipment Layout |
| Electrical Layout |
File details come from the government source that posted it. Updated .