DID_4005042_ATTACH.pdf
PDF 21 KB Posted
- Attached to
- F100-220, Duct, Turbine, Airfcraft
- Solicitation number
- FA812125R0013
About this file
This document is a Data Item Description (DID) for a First Article Qualification Test Plan and Procedures, numbered DI-NDTI-81307A, approved on 21 NOV 2006. The DID outlines requirements for a comprehensive test plan that contractors must develop to demonstrate the qualification of a specific product. The plan must include detailed test procedures, step-by-step operator instructions, specific equipment descriptions, and inspection criteria that define minimum performance requirements for the tested unit.
The related federal contract opportunity is a solicitation (FA812125R0013) by the Department of the Air Force Materiel Command for a one-time spares buy of a Duct, Turbine, Aircraft for the F100-PW-220 Engine. The solicitation is a small business set-aside with an estimated issue date of 7 MAR 2025 and a response deadline of 5 Jul 2025. The procurement involves multiple Contract Line Item Numbers (CLINs) with quantities ranging from 1-131 units, with a unit part number of 4086297. The duct is a nickel alloy component measuring 28.0" L x 28.0" W x 3.0" H, weighing 12 lbs, and is designed to hold the outer air seal on the High-pressure Turbine Rotor Assembly. Delivery is to Tinker Air Force Base in Oklahoma, with early delivery acceptable.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA812125R0013.pdf | ||
| FA812125R0013_______0001.pdf | ||
| FA812125R0013_Solicitation.pdf | ||
| 2970993_EDL_REPORT.pdf | ||
| 3858684_FA_REPORT.pdf | ||
| 4059838_TRNSPDATA_REPORT.pdf | ||
| 4004658_CDRL1_REPORT.pdf | ||
| 4059534_PKGRQMT_REPORT.pdf | ||
| 4014951_ATTACH.pdf | ||
| 4042162_BIDSET_REPORT.pdf | ||
| RTD_4014950_ATTACH.pdf | ||
| 1272204_EI.pdf | ||
| 4006019_CBTMIN.pdf | ||
| DID_4005044_ATTACH.pdf |
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: First Article Qualification Test Plan and Procedures
Number: DI-NDTI-81307A Approval Date: 21 NOV 2006 AMSC Number: 7649 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/I522 Applicable Forms: N/A
Use/relationship:
To establish test procedures, test equipment, and the inspection criteria that will be used by the contractor for first article qualification.
This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
This DID supercedes DI-NDTI-81307.
Requirements:
1. Reference documents. None.
2. Format:
The plan shall be in the contractor’s format.
3. Content:
This test plan shall include the following:
a. Purpose of test.
b. Applicable documents.
c. Description of units to be tested.
d. Test description to include the following:
(1) Step-by-step procedures which are to be followed by the operator when performing each test.
(2) Define readings to be taken, settings to be used, and description of the test equipment, including commercial identification.
DI-NDTI-81307A
(3) Drawings, schematics, photographs, etc, of noncommercial fixtures and testers necessary for test evaluation.
e. Inspection criteria that defines the minimum performance requirements that the unit under test must meet in order to be considered acceptable to the Government. This shall include, as a minimum, worst case prime power input, worst case signal level and timing inputs, and signal level and timing outputs.
4. END OF DI-NDTI-81307A
| DATA ITEM DESCRIPTION |
| Requirements: |
File details come from the government source that posted it. Updated .