CSS FA812225R0003 Final.pdf

Combined Synopsis/Solicitation

(IAW FAR 12.603)

FA8122-25-R-0003

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This solicitation is being issued as a request for proposal (RFP) IAW FAR Part 13. This announcement constitutes the only solicitation;

proposals are being requested and a written solicitation will not be issued. This solicitation and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-04.

The Air Force Sustainment Center Engines Section (AFSC/PZAAB) at Tinker Air Force Base, Oklahoma intends to award a firm fixed-price supply contract for the remanufacture of the F108 Turbine Clearance Control Valve. The contract will be issued for one (1) base year and four (4) one-year options. This solicitation is being issued as a sole source requirement to AAR Corp. (CAGE 5KM29). All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. Please see attached Statement of Work for details. NOTE: The resulting contract will not become effective until on or after 18 September 2025.

Qualification requirements apply. Vendors responding to this solicitation are required to have an approved Source Approval Request (SAR) prior to award. Award will not be delayed pending SAR approval. For qualification information/source approval requests, contact the Source Development, AFSC/Small Business Office at: afsc.sb.workflow@us.af.mil.

“Notice to Vendor(s)/Supplier(s): The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse a vendor/supplier for any costs incurred.”

Contractor is required to sign/date and fill in the vendor information and pricing on page two (2), complete the Pricing Matrix and the required provisions and fill-ins. Please return 1 signed copy to the issuing office.

Contractor agrees to provide all services/supplies set forth or otherwise identified in this solicitation and on any additional sheets subject to the terms and conditions specified herein.

Proposal Submission Information: Proposals are due by 18 August 2025, 1:30 PM (CDT).

The Contracting Officer is the sole contact for this acquisition. Address any questions or concerns you have and forward your proposl to the person(s) identified below.

NOTE: Emailed proposals are preferred Primary: Alternate:

Shannon Reed, Contracting Specialist Brad Bonsall, Contracting Officer shannon.reed.8@us.af.mil bradley.bonsall@us.af.mil

EVALUATION OF RESPONSES: Award will be conducted under the provisions of FAR Part 12, Commercial

Items, and FAR Part 13, Simplified Acquisition Procedures. The responsible vendor must be registered in the

System for Award Management (SAM) database available at: https://www.sam.gov/portal/public/SAM/. Lack of valid registration in SAM will qualify the vendor as ineligible for award. In accordance with DFARS 252.204-

7019, the vendor must be registered in the Supplier Performance Risk System (SPRS) with a current (within 3 years) NIST SP 800-171 assessment score of 110 or a Plan of Action Completion. Failure to register a current

NIST SP 800-171 assessment with SPRS may result in the vendor being determined ineligible for award.

mailto:shannon.reed.8@us.af.mil mailto:bradley.bonsall@us.af.mil https://www.sam.gov/portal/public/SAM/

REQUISITION UMBER:

FD20302400600

SOLICITATION NUMBER

FA8122‐25‐R-0003

SOLICITATION ISSUE DATE:

18 July 2025

SOLICITATION DUE DATE:

18 August 2025 @ 1:30 CDT

THIS ACQUISITION IS:

Full and Open Competition

Total Small Business Set Aside

Sole Source

SIZE STD:

1,500 employees

FEDERAL SUPPLY CLASS:

NAICS:

336412

DELIVERY:

SEE ITEM DESC

FOB DESTINATION

FOB ORIGIN

DPAS RATING: DO: A1

METHOD OF SOLICITATION:

REQUEST FOR Proposal

1. VENDOR INFORMATION

BUSINESS NAME:

STREET ADDRESS:

CITY, STATE, ZIP:

CAGE CODE and UEID:

BUSINESS WEB ADDRESS:

CONTACT PERSON:

TELEPHONE/FAX:

E-MAIL:

TOTAL CONTRACT PRICE:

Vendor’s Authorized Representative's Signature Date

Type or Print Name Position or Title

Contractor is Required fill-in and sign page 2 complete the Pricing Matrix and any required clauses/provisions and return 1 copy to the issuing office. Contractor agrees to furnish and deliver all items/services set forth or otherwise identified above and on any additional sheets subject to the terms and conditions specified herein.

X

X

SUPPLIES OR SERVICES AND PRICES/COSTS

In accordance with the attached CAV AF Reporting Requirements (see the document listed in Section J), the Contractor shall include a DD1348-1 when assets are shipped. DCMA Quality Assurance Representatives (QARs) will not approve or sign the DD1348-1, but will ensure a DD1348-1 is included with each returned asset. If a DD1348-1 is not included with each returned asset, DCMA will not sign the receiving report (DD250).

This requirement is for remanufacture of F108 Turbine Clearance Control Valve. This is a DPAS rated requirement and qualification requirements apply.

The Government plans to award a Firm Fixed Price (FFP) Requirements type remanufacturing supply contract, consisting of a 1year basic ordering period and four 1year ordering period options, for a total contract ordering period of 5 years (60 months).

The best estimated quantity (BEQ) set forth for each line item is the estimated total quantity the Government expects to order over the applicable ordering period of the contract and is not a representation that the estimated quantity will be required or ordered. In accordance with FAR 16.503(c) Government Property Furnished for Repair When a requirements contract is used to acquire work on existing items of Government property, the contracting officer shall specify in the Schedule that failure of the Government to furnish such items in the amounts or quantities described in the Schedule as "estimated" or "maximum" will not entitle the contractor to any equitable adjustment in price under the Government Property clause of the contract.

Contractor Furnished Material (CFM) is required for the required work described herein. The only Government Furnished Property (GFP) on this contract will be the assets sent for remanufacture. The contractor shall furnish and deliver to the Government the services and supplies necessary to perform this requirement in accordance with the Terms and Conditions, including all attachments contained in this solicitation. Upon receipt of an order, the Contractor shall furnish all plant, labor, equipment and technical expertise to perform repair services described herein. In addition, the Contractor shall furnish those materials and parts contemplated in any attachments as may be further defined herein. All such items as may be set forth on the orders issued by the Government, shall be restored to their original life expectancy (or nearly so), tested, prepared for storage, and shipped to the Government IAW the documents attached to this solicitation.

Some units may, upon disassembly and/or inspection, be determined to be beyond reparable limits specified in the work specifications and/or technical orders. Any cost for work performed by the Contractor, prior to determination that such equipment is beyond reparable limits, shall be included in the unit price of the listed items. CONDEMNED UNITS WILL NOT BE COUNTED AS PRODUCTION.

REMANUFACTURE OF TURBINE CLEARANCE CONTROL VALVE (BASIC YR)

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

REMANUFACTURE OF TURBINE CLEARANCE CONTROL VALVE (BASIC YR)

100 EA

GROUP STOCK NO P/N CAGE

Group 001 Input 4810014603279 PN 7061M31G05 And/Or

4810013925278 PN 7061M31G04 And/Or 4810011392205 PN 7061M31G01 And/Or 4810011392205 PN 7061M31G02 And/Or 4810011392205 PN 7061M31G03 And/Or

GROUP STOCK NO P/N CAGE

Group 001 Output 4180014603279 PN 7061M31G05

NSN: 4810014603279 PN

VALVE ASSEMBLY

Controls the turbine bladetoshroud clearance during steadystate conditions. It ports either hot (9th stage), cooler (5th stage), or warm mixed (5th and 9th stage) air to the turbine shroud support rings.

Various Alloys Manufacturer Part Number 58828 7061M31G05

5KM29 7061M31G05

79318 7061M31G05 Associated Document(s) Line Item(s)

FD20302400600 0001

Priority: R

Inspection: Origin Acceptance: Origin Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 90012015 2008

IUID Required: Yes Type / Ship To Quantity (U/I) *ARO Funded Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required Delivery

8 EA *30 Calendar Days

Proposed Delivery

8 EA

TEST AND INSPECTION REPORT (BASIC YR)

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

2 EA

NSN: 4810RPH240009 PN

TEST AND INSPECTION REPORT (BASIC YR)

Repair REPORT Test & Inspection ReportF108 TCC Valve Output NSN: 4810014603279 PNOutput PN: 7061M31G05 Associated Document(s) Line Item(s)

FD20302400600 0002

Priority: R

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For

A SW3211 PAA ACCT 09

Type / Ship To Quantity (U/I) IAW SOW Req No / Pri

Required Delivery

A SW3211 2 EA IAW SOW

Proposed Delivery

A SW3211 2 EA

OVER AND ABOVE (BASIC YR)

Item No.

To Be Negotiated Quantity U/I Unit Price

1 LO TBN

Over and Above O&A Associated Document(s) Line Item(s)

FD20302400600 0003

Priority: R

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

A TBDTBD ORIGIN

Type / Ship To PACRN Mark For

A TBDTBD ACCT 09

Type / Ship To Quantity (U/I) IAW SOW Req No / Pri

Required Delivery

A TBDTBD 1 LO IAW SOW

Proposed Delivery

A TBDTBD 1 LO

The work called for under the Over and Above items shall be accomplished when directed by the PCO and/or ACO in accordance with DFARS Clause 252.2177028 Over and Above Work and the attached PWS. Over and Above Work is not included in the scope and prices of the basic work, and will be negotiated upon determination of use, and prior to performance of the work.

DATA (BASIC YR)

Item No.

Not Separately Priced Quantity U/I Unit Price

1 LO NSP

Data Contract Data Requirements Lists (CDRLs) IAW DD Form 14231.This requirement will not be waived.

Associated Document(s) Line Item(s)

FD20302400600 0004

Priority: R

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

A TBDTBD ORIGIN

Type / Ship To PACRN Mark For

A TBDTBD ACCT 09

Type / Ship To Quantity (U/I) IAW SOW Req No / Pri

Required Delivery

A TBDTBD 1 LO IAW SOW

Proposed Delivery

A TBDTBD 1 LO

REMANUFACTURE OF TURBINE CLEARANCE CONTROL VALVE (OPT YR 1)

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

100 EA

GROUP STOCK NO P/N CAGE

Group 001 Input 4810014603279 PN 7061M31G05 And/Or

4810013925278 PN 7061M31G04 And/Or 4810011392205 PN 7061M31G01 And/Or 4810011392205 PN 7061M31G02 And/Or 4810011392205 PN 7061M31G03 And/Or

GROUP STOCK NO P/N CAGE

Group 001 Output 4180014603279 PN 7061M31G05

NSN: 4810014603279 PN

VALVE ASSEMBLY

REMANUFACTURE OF TURBINE CLEARANCE CONTROL VALVE (OPT YR 1)

Controls the turbine bladetoshroud clearance during steadystate conditions. It ports either hot (9th stage), cooler (5th stage), or warm mixed (5th and 9th stage) air to the turbine shroud support rings.

Various Alloys Manufacturer Part Number 58828 7061M31G05

5KM29 7061M31G05

79318 7061M31G05 Associated Document(s) Line Item(s)

FD20302400600 0001

Priority: R

Inspection: Origin Acceptance: Origin Quality Assurance: This is classified as a CSI item. The government does not own the design or data rights for this item but can approve repair sources since it is commercial off the shelf.

IUID Required: Yes Physical Item Markings:

Type / Ship To Quantity (U/I) *ARO Funded Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required Delivery

8 EA *30 Calendar Days

Proposed Delivery

8 EA

TEST AND INSPECTION REPORT (OPT YR 1)

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

2 EA

NSN: 4810RPH240009 PN

Repair REPORT Test & Inspection ReportF108 TCC Valve Output NSN: 4810014603279 PNOutput PN: 7061M31G05Best Estimated Quantities (BEQ):

Associated Document(s) Line Item(s)

FD20302400600 0002

Priority: R

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For

A SW3211 PAA ACCT 09

Type / Ship To Quantity (U/I) IAW SOW Req No / Pri

TEST AND INSPECTION REPORT (OPT YR 1)

Required Delivery

A SW3211 2 EA IAW SOW

Proposed Delivery

A SW3211 2 EA

OVER AND ABOVE (OPT YR 1)

Item No.

To Be Negotiated Quantity U/I Unit Price

1 LO TBN

Over and Above O&A Associated Document(s) Line Item(s)

FD20302400600 0003

Priority: R

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

A TBDTBD ORIGIN

Type / Ship To PACRN Mark For

A TBDTBD ACCT 09

Type / Ship To Quantity (U/I) IAW SOW Req No / Pri

Required Delivery

A TBDTBD 1 LO IAW SOW

Proposed Delivery

A TBDTBD 1 LO

The work called for under the Over and Above items shall be accomplished when directed by the PCO and/or ACO in accordance with DFARS Clause 252.2177028 Over and Above Work and the attached PWS. Over and Above Work is not included in the scope and prices of the basic work, and will be negotiated upon determination of use, and prior to performance of the work.

DATA (OPT YR 1)

Item No.

Not Separately Priced Quantity U/I Unit Price

DATA (OPT YR 1)

1 LO NSP

Data Contract Data Requirements Lists (CDRLs) IAW DD Form 14231.This requirement will not be waived.

Associated Document(s) Line Item(s)

FD20302400600 0004

Priority: R

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

A TBDTBD ORIGIN

Type / Ship To PACRN Mark For

A TBDTBD ACCT 09

Type / Ship To Quantity (U/I) IAW SOW Req No / Pri

Required Delivery

A TBDTBD 1 LO IAW SOW

Proposed Delivery

A TBDTBD 1 LO

REMANUFACTURE OF TURBINE CLEARANCE CONTROL VALVE (OPT YR 2)

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

100 EA

GROUP STOCK NO P/N CAGE

Group 001 Input 4810014603279 PN 7061M31G05 And/Or

4810013925278 PN 7061M31G04 And/Or 4810011392205 PN 7061M31G01 And/Or 4810011392205 PN 7061M31G02 And/Or 4810011392205 PN 7061M31G03 And/Or

GROUP STOCK NO P/N CAGE

Group 001 Output 4180014603279 PN 7061M31G05

NSN: 4810014603279 PN

VALVE ASSEMBLY

Controls the turbine bladetoshroud clearance during steadystate conditions. It ports either hot (9th stage), cooler (5th stage), or warm mixed (5th and 9th stage) air to the turbine shroud support rings.

Various Alloys Manufacturer Part Number 58828 7061M31G05

5KM29 7061M31G05

79318 7061M31G05 Associated Document(s) Line Item(s)

FD20302400600 0001

Priority: R

REMANUFACTURE OF TURBINE CLEARANCE CONTROL VALVE (OPT YR 2)

Inspection: Origin Acceptance: Origin Quality Assurance: This is classified as a CSI item. The government does not own the design or data rights for this item but can approve repair sources since it is commercial off the shelf.

IUID Required: Yes Physical Item Markings:

Type / Ship To Quantity (U/I) *ARO Funded Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required Delivery

8 EA *30 Calendar Days

Proposed Delivery

8 EA

TEST AND INSPECTION REPORT (OPT YR 2)

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

2 EA

NSN: 4810RPH240009 PN

Repair REPORT Test & Inspection ReportF108 TCC Valve Output NSN: 4810014603279 PNOutput PN: 7061M31G05 Associated Document(s) Line Item(s)

FD20302400600 0002

Priority: R

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For

A SW3211 PAA ACCT 09

Type / Ship To Quantity (U/I) IAW SOW Req No / Pri

Required Delivery

A SW3211 2 EA IAW SOW

Proposed

A SW3211 2 EA

OVER AND ABOVE (OPT YR 2)

Item No.

To Be Negotiated Quantity U/I Unit Price

1 LO TBN

Over and Above O&A Associated Document(s) Line Item(s)

FD20302400600 0003

Priority: R

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

A TBDTBD ORIGIN

Type / Ship To PACRN Mark For

A TBDTBD ACCT 09

Type / Ship To Quantity (U/I) IAW SOW Req No / Pri

Required Delivery

A TBDTBD 1 LO IAW SOW

Proposed Delivery

A TBDTBD 1 LO

The work called for under the Over and Above items shall be accomplished when directed by the PCO and/or ACO in accordance with DFARS Clause 252.2177028 Over and Above Work and the attached PWS. Over and Above Work is not included in the scope and prices of the basic work, and will be negotiated upon determination of use, and prior to performance of the work.

DATA (OPT YR 2)

Item No.

Not Separately Priced Quantity U/I Unit Price

1 LO NSP

Data Contract Data Requirements Lists (CDRLs) IAW DD Form 14231.This requirement will not be waived.

Associated Document(s) Line Item(s)

FD20302400600 0004

Priority: R

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

A TBDTBD ORIGIN

DATA (OPT YR 2)

Type / Ship To PACRN Mark For

A TBDTBD ACCT 09

Type / Ship To Quantity (U/I) IAW SOW Req No / Pri

Required Delivery

A TBDTBD 1 LO IAW SOW

Proposed Delivery

A TBDTBD 1 LO

REMANUFACTURE OF TURBINE CLEARANCE CONTROL VALVE (OPT YR 3)

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

100 EA

GROUP STOCK NO P/N CAGE

Group 001 Input 4810014603279 PN 7061M31G05 And/Or

4810013925278 PN 7061M31G04 And/Or 4810011392205 PN 7061M31G01 And/Or 4810011392205 PN 7061M31G02 And/Or 4810011392205 PN 7061M31G03 And/Or

GROUP STOCK NO P/N CAGE

Group 001 Output 4180014603279 PN 7061M31G05

NSN: 4810014603279 PN

VALVE ASSEMBLY

Controls the turbine bladetoshroud clearance during steadystate conditions. It ports either hot (9th stage), cooler (5th stage), or warm mixed (5th and 9th stage) air to the turbine shroud support rings.

Various Alloys Manufacturer Part Number 58828 7061M31G05

5KM29 7061M31G05

79318 7061M31G05 Associated Document(s) Line Item(s)

FD20302400600 0001

Priority: R

Inspection: Origin Acceptance: Origin Quality Assurance: This is classified as a CSI item. The government does not own the design or data rights for this item but can approve repair sources since it is commercial off the shelf.

IUID Required: Yes Physical Item Markings:

Type / Ship To Quantity (U/I) *ARO Funded Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required

REMANUFACTURE OF TURBINE CLEARANCE CONTROL VALVE (OPT YR 3)

8 EA *30 Calendar Days

Proposed Delivery

8 EA

TEST AND INSPECTION REPORT (OPT YR 3)

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

2 EA

NSN: 4810RPH240009 PN

Repair REPORT Test & Inspection ReportF108 TCC Valve Output NSN: 4810014603279 PNOutput PN: 7061M31G05 Associated Document(s) Line Item(s)

FD20302400600 0002

Priority: R

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For

A SW3211 PAA ACCT 09

Type / Ship To Quantity (U/I) IAW SOW Req No / Pri

Required Delivery

A SW3211 2 EA IAW SOW

Proposed Delivery

A SW3211 2 EA

OVER AND ABOVE (OPT YR 3)

Item No.

To Be Negotiated Quantity U/I Unit Price

1 LO TBN

Over and Above O&A Associated Document(s) Line Item(s)

FD20302400600 0003

Priority: R

OVER AND ABOVE (OPT YR 3)

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

A TBDTBD ORIGIN

Type / Ship To PACRN Mark For

A TBDTBD ACCT 09

Type / Ship To Quantity (U/I) IAW SOW Req No / Pri

Required Delivery

A TBDTBD 1 LO IAW SOW

Proposed Delivery

A TBDTBD 1 LO

The work called for under the Over and Above items shall be accomplished when directed by the PCO and/or ACO in accordance with DFARS Clause 252.2177028 Over and Above Work and the attached PWS. Over and Above Work is not included in the scope and prices of the basic work, and will be negotiated upon determination of use, and prior to performance of the work.

DATA (OPT YR 3)

Item No.

Not Separately Priced Quantity U/I Unit Price

1 LO NSP

Data Contract Data Requirements Lists (CDRLs) IAW DD Form 14231.This requirement will not be waived.

Associated Document(s) Line Item(s)

FD20302400600 0004

Priority: R

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

A TBDTBD ORIGIN

Type / Ship To PACRN Mark For

A TBDTBD ACCT 09

Type / Ship To Quantity (U/I) IAW SOW Req No / Pri

Required Delivery

A TBDTBD 1 LO IAW SOW

Proposed

REMANUFACTURE OF TURBINE CLEARANCE CONTROL VALVE (OPT YR 4)

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

100 EA

GROUP STOCK NO P/N CAGE

Group 001 Input 4810014603279 PN 7061M31G05 And/Or

4810013925278 PN 7061M31G04 And/Or 4810011392205 PN 7061M31G01 And/Or 4810011392205 PN 7061M31G02 And/Or 4810011392205 PN 7061M31G03 And/Or

GROUP STOCK NO P/N CAGE

Group 001 Output 4180014603279 PN 7061M31G05

NSN: 4810014603279 PN

VALVE ASSEMBLY

Controls the turbine bladetoshroud clearance during steadystate conditions. It ports either hot (9th stage), cooler (5th stage), or warm mixed (5th and 9th stage) air to the turbine shroud support rings.

Various Alloys Manufacturer Part Number 58828 7061M31G05

5KM29 7061M31G05

79318 7061M31G05 Associated Document(s) Line Item(s)

FD20302400600 0001

Priority: R

Inspection: Origin Acceptance: Origin Quality Assurance: This is classified as a CSI item. The government does not own the design or data rights for this item but can approve repair sources since it is commercial off the shelf.

IUID Required: Yes Physical Item Markings:

Type / Ship To Quantity (U/I) *ARO Funded Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required Delivery

8 EA *30 Calendar Days

Proposed Delivery

8 EA

TEST AND INSPECTION REPORT (OPT YR 4)

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

TEST AND INSPECTION REPORT (OPT YR 4)

2 EA

NSN: 4810RPH240009 PN

Repair REPORT Test & Inspection ReportF108 TCC Valve Output NSN: 4810014603279 PNOutput PN: 7061M31G05 Associated Document(s) Line Item(s)

FD20302400600 0002

Priority: R

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For

A SW3211 PAA ACCT 09

Type / Ship To Quantity (U/I) IAW SOW Req No / Pri

Required Delivery

A SW3211 2 EA IAW SOW

Proposed Delivery

A SW3211 2 EA

OVER AND ABOVE (OPT YR 4)

Item No.

To Be Negotiated Quantity U/I Unit Price

1 LO TBN

Over and Above O&A Associated Document(s) Line Item(s)

FD20302400600 0003

Priority: R

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

A TBDTBD ORIGIN

Type / Ship To PACRN Mark For

A TBDTBD ACCT 09

Type / Ship To Quantity (U/I) IAW SOW Req No / Pri

Required Delivery

A TBDTBD 1 LO IAW SOW

Proposed

OVER AND ABOVE (OPT YR 4)

A TBDTBD 1 LO

The work called for under the Over and Above items shall be accomplished when directed by the PCO and/or ACO in accordance with DFARS Clause 252.2177028 Over and Above Work and the attached PWS. Over and Above Work is not included in the scope and prices of the basic work, and will be negotiated upon determination of use, and prior to performance of the work.

DATA (OPT YR 4)

Item No.

Not Separately Priced Quantity U/I Unit Price

1 LO NSP

Data Contract Data Requirements Lists (CDRLs) IAW DD Form 14231.This requirement will not be waived.

Associated Document(s) Line Item(s)

FD20302400600 0004

Priority: R

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

A TBDTBD ORIGIN

Type / Ship To PACRN Mark For

A TBDTBD ACCT 09

Type / Ship To Quantity (U/I) IAW SOW Req No / Pri

Required Delivery

A TBDTBD 1 LO IAW SOW

Proposed

SHIP TO / PLACE OF PERFORMANCE

TYPE/CODE: A SW3211

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

TYPE/CODE: A TBDTBD 000000000

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

CONTRACT CLAUSES

252.2037000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) (IAW DFARS 203.1714(a), DFARS 212.301(f)(ii))

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT

REPORTING DEVIATION 2024-O0013, REVISION 1 (MAY 2024)

(IAW Class Deviation 2024-O0013 Rev. 1)

252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE

TELECOMMUNICATIONS EQUIPMENT OR SERVICES (JAN 2023)

(IAW DFARS 204.2105(c))

252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS

(OCT 2024)

(IAW DFARS 205.470)

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(IAW DFARS 211.274-5(a), DFARS 212.301(f)(xii))

(a) Definitions. As used in this clause—

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/uniqueid.html.

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/uniqueid.html.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

See Schedule as Applicable

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

*Items less than $5000, which require UID, will be specifically identified in the schedule.

See Schedule as Applicable

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number _____( or See Schedule as Applicable).

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number _____( or See Schedule as Applicable).

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.2327003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number ______, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS -- COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

(DEVIATION 2025-O0003 and 2025-O0004) (MAR 2025) (IAW FAR 12.301(b)(4))

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.20319,Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.20423, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 11591).

(3) 52.20425, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 89(a)(1)(A) of Pub. L. 115232).

(4) 52.20910, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(5) 52.23240, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.2333, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(7) 52.2334, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 10877, 10878 (19 U.S.C.

3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.] __X __ (1) 52.2036, Restrictions on Subcontractor Sales to the Government (JUN 2020), with

Alternate I (NOV 2021)(41 U.S.C. 4704 and 10 U.S.C. 4655).

__ __ (2) 52.20313, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C.

3509).

__ __ (3) 52.20315, Whistleblower Protections Under the American Recovery and Reinvestment

Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 1115). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

__ __ (4) 52.20317, Contractor Employee Whistleblower Rights (NOV 2023) (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community— see FAR 3.900(a).

__X __ (5) 52.20410, Reporting Executive Compensation and FirstTier Subcontract Awards (JUN 2020) (Pub. L. 109282) (31 U.S.C. 6101 note).

(6) [Reserved] __ __ (7) 52.20414, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111117, section 743 of Div. C).

__ __ (8) 52.20415, Service Contract Reporting Requirements for IndefiniteDelivery Contracts

(OCT 2016) (Pub. L. 111117, section 743 of Div. C).

__X __ (9) 52.20427, Prohibition on a ByteDance Covered Application (JUN 2023) (Section 102 of Division R of Pub. L. 117328).

__ __ (10) 52.204–28, Federal Acquisition Supply Chain Security Act Orders—Federal Supply Schedules, Governmentwide Acquisition Contracts, and MultiAgency Contracts. (DEC 2023) (Pub. L. 115–390, title II).

__X __ (11) (i) 52.204–30, Federal Acquisition Supply Chain Security Act Orders— Prohibition. (DEC 2023) (Pub. L. 115–390, title II).

__ __ (11) (ii) Alternate I (DEC 2023) of 52.204–30.

__X __ (12) 52.2096, Protecting the Government's Interest When Subcontracting With Contractors

Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Jan 2025) ( 31 U.S.C. 6101 note).

__X __ (13) 52.2099, Updates of Publicly Available Information Regarding Responsibility Matters

(OCT 2018) (41 U.S.C. 2313).

____ (14) [Reserved} __ __ (15) 52.2193, Notice of HUBZone SetAside or SoleSource Award (OCT 2022)(15 U.S.C.

657a).

__ __ (16) 52.2194, Notice of Price Evaluation Preference for HUBZone Small Business Concerns

(OCT 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).

(17) [Reserved] __ __ (18) (i) 52.2196, Notice of Total Small Business SetAside (NOV 2020)(15 U.S.C. 644).

__ __ (18) (ii) Alternate I (MAR 2020) OF 52.2196.

__ __ (19) (i) 52.2197, Notice of Partial Small Business SetAside (NOV 2020)(15 U.S.C. 644).

__ __ (19) (ii) Alternate I (MAR 2020) of 52.2197.

__X __ (20) 52.2198, Utilization of Small Business Concerns (JAN 2025) (15 U.S.C. 637(d)(2) and (3)).

X (21) (i) 52.2199, Small Business Subcontracting Plan (JAN 2025) (15 U.S.C. 637(d)(4)).

__ __ (21) (ii) Alternate I (NOV 2016) of 52.2199.

__ __ (21) (iii) Alternate II (NOV 2016) of 52.2199.

__X __ (21) (iv) Alternate III (JUN 2020) of 52.2199.

(21) (v) Alternate IV (JAN 2025) of 52.2199.

__ (22) (i) 52.21913, Notice of SetAside of Orders (MAR 2020) (15 U.S.C. 644(r)).

__ (22) (ii) Alternate I (MAR 2020) of 52.21913.

__ (23) 52.21914, Limitations on Subcontracting (OCT 2022)(15 U.S.C. 657s).

__X __ (24) 52.21916, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C.

637(d)(4)(F)(i)).

__ __ (25) 52.219–27, Notice of SetAside for, or SoleSource Award to, ServiceDisabled Veteran

Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (FEB 2024) (15 U.S.C. 657f).

__X __ (26) (i) 52.21928, Postaward Small Business Program Rerepresentation (JAN 2025) (15 U.S.C. 632(a)(2)).

(26) (ii) Alternate I (MAR 2020) of 52.21928.

__ __ (27) 52.21929, Notice of SetAside for, or SoleSource Award to, Economically

Disadvantaged WomenOwned Small Business Concerns (OCT 2022) (15 U.S.C.

637(m)).

__ __ (28) 52.21930, Notice of SetAside for, or SoleSource Award to, WomenOwned Small Business Concerns Eligible Under the WomenOwned Small Business Program (OCT 2022) (15 U.S.C. 637(m)).

(29) 52.21932, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C.

644(r)).

(30) 52.21933, Nonmanufacturer Rule (SEP 2021) (15 U.S.C. 637(a)(17)).

__X __ (31) 52.2223, Convict Labor (JUN 2003)(E.O. 11755).

__X __ (32) 52.22219, Child Labor—Cooperation with Authorities and Remedies (Jan 2025)( E.O.

13126).

___ (33) [Reserved] ___ (34) [Reserved] __X __ (35) (i) 52.22235, Equal Opportunity for Veterans (JUN 2020)(38 U.S.C.

4212).

(35) (ii) Alternate I (JUL 2014) of 52.22235.

__X __ (36) (i) 52.22236, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

(36) (ii) Alternate I (JUL 2014) of 52.22236.

__X __ (37) 52.22237, Employment Reports on Veterans (JUN 2020)(38 U.S.C. 4212).

__X __ (38) 52.22240, Notification of Employee Rights Under the National Labor Relations Act (DEC

2010) (E.O. 13496).

__X __ (39) (i) 52.22250, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and

E.O. 13627).

__ __ (39) (ii) Alternate I (MAR 2015) of 52.22250 (22 U.S.C. chapter 78 and E.O. 13627).

__ __ (40) 52.22254, Employment Eligibility Verification (Jan 2025) ( Executive Order 12989). (Not applicable to the acquisition of commercially available offtheshelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

__ __ (41) (i) 52.2239, Estimate of Percentage of Recovered Material Content for EPADesignated Items (MAY 2008)(42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available offtheshelf items.)

__ _ (41) (ii) Alternate I (MAY 2008) of 52.2239 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available offtheshelf items.)

__X __ (42) 52.22311, OzoneDepleting Substances and High Global Warming Potential Hydrofluorocarbons (MAY 2024) (42 U.S.C. 7671, et seq.).

__X __ (43) 52.22312, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (MAY 2024) (42 U.S.C. 7671, et seq.).

__X __ (44) 52.22320, Aerosols (MAY 2024) (42 U.S.C. 7671, et seq.).

__X __ (45) 52.22321, Foams (JUN 2016) (42 U.S.C. 7671, et seq.).

__X (46) 52.22323, Sustainable Products and Services (MAR 2025) (DEVIATION 2025O0004)) (7

U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

__X __ (47) (i) 52.2243, Privacy Training (JAN 2017) (5 U.S.C. 552a).

___ (47) (ii) Alternate I (JAN 2017) of 52.2443.

__X __ (48) (i) 52.2251, Buy AmericanSupplies (OCT 2022) (41 U.S.C. chapter 83).

___ (48) (ii) Alternate I (OCT 2022) of 52.2251.

__ __ (49) (i) 52.2253, Buy AmericanFree Trade AgreementsIsraeli Trade Act (NOV 2023) (19

U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 45014732), Public Law 103182, 10877, 10878, 108286, 108302, 10953, 109169, 109283, 110138, 11241, 112 42, and 11243.

__ _ (49) (ii) Alternate I [Reserved].

__ _ (49) (iii) Alternate II (JAN 2025) of 52.2253.

__ _ (49) (iv) Alternate III (FEB 2024) of 52.2253.

__ _ (49) (v) Alternate IV (OCT 2022) of 52.2253.

__X __ (50) 52.2255, Trade Agreements (NOV 2023) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

__X __ (51) 52.22513, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of Treasury).

__ __ (52) 52.22526, Contractors Performing Private Security Functions Outside the United States

(OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

__ __ (53) 52.2264, Notice of Disaster or Emergency Area SetAside (NOV 2007)(42 U.S.C. 5150).

__ __ (54) 52.2265, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov

2007)(42 U.S.C. 5150).

__X __ (55) 52.2268, Encouraging Contractor Policies to Ban Text Messaging While Driving (MAY

2024) (E.O. 13513).

__ __ (56) 52.229–12, Tax on Certain Foreign Procurements (FEB 2021).

__ __ (57) 52.23229, Terms for Financing of Purchases of Commercial Products and Commercial

Services (NOV 2021)(41 U.S.C. 4505, 10 U.S.C. 3805).

__ __ (58) 52.23230, Installment Payments for Commercial Products and Commercial Services

(NOV 2021)(41 U.S.C. 4505, 10 U.S.C. 3805).

__X __ (59) 52.23233, Payment by Electronic Funds Transfer—System for Award Management

(OCT 2018) (31.U.S.C. 3332).

__ __ (60) 52.23234, Payment by Electronic Funds Transfer—Other than System for Award

Management (JUL 2013)(31.U.S.C. 3332).

__ __ (61) 52.23236, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

__ __ (62) 52.2391, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a).

__X __ (63) 52.2401, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone ActCovered Foreign Entities (Nov 2024) (Sections 18211826, Pub. L. 11831, 41 U.S.C. 3901 note prec.).

__X __ (64) 52.2425, Payments to Small Business Subcontractors (JAN 2017) (15 U.S.C. 637(d)(13)).

__ __ (65) (i) 52.24764, Preference for Privately Owned U.S.Flag Commercial Vessels (NOV 2021)

(46 U.S.C. 55305 and 10 U.S.C. 2631).

__ _ (65) (ii) Alternate I (APR 2003) of 52.24764.

(65) (iii) Alternate II (NOV 2021) of 52.24764.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.] __ __ (1) 52.22241, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

__ __ (2) 52.22242, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ __ (3) 52.22243, Fair Labor Standards Act and Service Contract Labor StandardsPrice

Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ __ (4) 52.22244, Fair Labor Standards Act and Service Contract Labor Standards Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ __ (5) 52.22251, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment— Requirements (May 2014) (41 U.S.C. chapter 67).

__ __ (6) 52.22253, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services—Requirements (May 2014)(41 U.S.C. chapter 67).

__ __ (7) 52.22255, Minimum Wages for Contractor Workers Under Executive Order 14026 (JAN 2022).

__ __ (8) 52.22262, Paid Sick Leave Under Executive Order 13706. (Jan 2022) (E.O. 13706).

__ __ (9) 52.2266, Promoting Excess Food Donation to Nonprofit Organizations. (JUN 2020) (42

U.S.C. 1792).

___ (10) 52.24769, Reporting Requirement for U.S.Flag Air Carriers Regarding Training to Prevent Human Trafficking (Jan 2025) ( 49 U.S.C. 40118(g)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract and does not contain the clause at 52.2152, Audit and Records Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in paragraphs (e)(1) of this paragraph in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.20313, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

(ii) 52.203–17, Contractor Employee Whistleblower Rights (NOV 2023) (41 U.S.C. 4712).

(iii) 52.20319, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.20423, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115 91).

(v) 52.20425, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115232).

(vi) 52.20427, Prohibition on a ByteDance Covered Application (June 2023) (Section 102 of Division R of Pub. L. 117328).

(vii)(A) 52.204–30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (DEC 2023) (Pub. L. 115–390, title II).

(B) Alternate I (DEC 2023) of 52.204–30.

(viii) 52.2198, Utilization of Small Business Concerns (JAN 2025) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.2198 in lower tier subcontracts that offer subcontracting opportunities.

(ix) [Reserved]

(x) [Reserved]

(xi) 52.22235, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

(xii) 52.22236, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C.793).

(xiii) 52.22237, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

(xiv) 52.22240, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.22240.

(xv) 52.22241, Service Contract Labor Standards (Aug 2018), (41 U.S.C. chapter 67).

(xvi)(A) 52.22250, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O.

13627).

(B) Alternate I (Mar 2015) of 52.22250 (22 U.S.C. chapter 78 E.O. 13627).

(xvii) 52.22251, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain EquipmentRequirements (May 2014) (41 U.S.C. chapter 67.)

(xviii) 52.22253, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain ServicesRequirements (May 2014) (41 U.S.C. chapter 67)

(xix) 52.22254, Employment Eligibility Verification (Jan 2025) (E.O. 12989).

(xx) 52.22255, Minimum Wages for Contractor Workers Under Executive Order 14026 (JAN

2022).

(xxi) 52.22262, Paid Sick Leave Under Executive Order 13706 (JAN 2022) (E.O. 13706).

(xxii)(A) 52.2243, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.2243.

(xxiii) 52.22526, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008;

10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxiv) 52.2266, Promoting Excess Food Donation to Nonprofit Organizations. (JUN 2020) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.2266.

(xxv) 52.23240, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.23240.

(xxvi) 52.2401, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone ActCovered Foreign Entities (Nov 2024) (Sections 18211826, Pub. L.

11831, 41 U.S.C. 3901 note prec.).

(xxvii) 52.24764, Preference for PrivatelyOwned U.S. Flag Commercial Vessels (NOV 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.24764.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

252.219-7003 SMALL BUSINESS SUBCONTRACTING PLAN (DoD CONTRACTS) (DEC 2019) (IAW DFARS 219.708(b)(1)(A), DFARS 219.708(b)(1)(A)(1))

252.219-7003 SMALL BUSINESS SUBCONTRACTING PLAN (DoD CONTRACTS)--ALTERNATE I

(DEC 2019)

(IAW DFARS 219.708(b)(1)(A)(2), DFARS 219.708(b)(1)(A)(1))

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JAN 2023)

(IAW DFARS 223.7306, DFARS 212.301(f)(xxi))

252.223-7009 PROHIBITION OF PROCUREMENT OF FLUORINATED AQUEOUS FILM-FORMING

FOAM FIRE-FIGHTING AGENT FOR USE ON MILITARY INSTALLATIONS

(MAR 2024)

(IAW DFARS 223.7404)

252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM--BASIC (FEB 2024)

(IAW DFARS 225.1101(2)(i) and (2)(ii))

252.225-7009 RESTRICTION ON ACQUISITION OF CERTAIN ARTICLES CONTAINING SPECIALTY

METALS (JAN 2023)

(IAW DFARS 225.7003-5(a)(2), DFARS 212.301(f)(xxv))

252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (APR 2022)

(IAW DFARS 225.7002-3(a))

252.225-7967 PROHIBITION REGARDING RUSSIAN FOSSIL FUEL BUSINESS OPERATIONS

(DEVIATION 2024-O0006, REVISION 1) (FEB 2024) (FEB 2024)

(IAW CLASS DEVIATION 2024-O0006, REVISION 1)

252.225-7972 PROHIBITION ON THE PROCUREMENT OF FOREIGN-MADE UNMANNED AIRCRAFT

SYSTEMS (AUG 2024) (DEVIATION 2024-O0014) (AUG 2024)

(IAW Deviation 2024-O0014)

252.226-7001 UTILIZATION OF INDIAN ORGANIZATIONS, INDIAN-OWNED ECONOMIC

ENTERPRISES, AND NATIVE HAWAIIAN SMALL BUSINESS CONCERNS (JAN 2023)

(IAW DFARS 226.104)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS

(DEC 2018)

(IAW DFARS 232.7004(a))

(a) Definitions. As used in this clause—

(1) “Contract financing payment” and “invoice payment” have the meanings given in section 32.001 of the Federal Acquisition Regulation.

(2) “Electronic form” means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, email, and scanned documents are not acceptable electronic forms for submission of payment requests. However, scanned documents are acceptable when they are part of a submission of a payment request made using Wide Area WorkFlow (WAWF) or another electronic form authorized by the Contracting Officer.

(3) “Payment request” means any request for contract financing payment or invoice payment submitted by the Contractor under this contract.

(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests and receiving reports using WAWF, in one of the following electronic formats that WAWF accepts: Electronic Data Interchange, Secure File Transfer Protocol, or World Wide Web input. Information regarding WAWF is available on the Internet at https://wawf.eb.mil/ .

(c) The Contractor may submit a payment request and receiving report using other than WAWF only when—

(1) The Contracting Officer authorizes use of another electronic form. With such an authorization, the Contractor and the Contracting Officer shall agree to a plan, which shall include a timeline, specifying when the Contractor will transfer to WAWF;

(2) DoD is unable to receive a payment request or provide acceptance in electronic form;

(3) The Contracting Officer administering the contract for payment has determined, in writing, that electronic submission would be unduly burdensome to the Contractor. In such cases, the Contractor shall include a copy of the Contracting Officer’s determination with each request for payment; or

(4) DoD makes a payment for commercial transportation services provided under a Government rate tender or a contract for transportation services using a DoDapproved…