CNC UMC Specifications Technical Requirements_5.21.26 B Stone.doc
DOC document 32 KB Posted
- Attached to
- CNC Ultrasonic Machining Center
- Solicitation number
- 6-S176-Q-00284-00
- Issued by
-
Department of Energy Office of Science
About this file
This is an addendum to a supplier quote and technical requirements document for a CNC Ultrasonic Machining Center procurement. Argonne National Laboratory (ANL) is seeking to purchase a complete CNC Ultrasonic Machining Center system with installation, calibration, supervision, and on-site operator training under solicitation number 6-S176-Q-00284-00. The procurement is being conducted by the Department of Energy Office of Science using a Lowest Price Technically Acceptable evaluation criterion. Delivery to ANL is required within 5 months or less, with all quotations due by 3:00 PM CDT on June 5, 2026.
The technical requirements for the system include: ultrasonic machining capability for cutting hard and brittle crystalline and ceramic materials; workpiece capacity of 475mm x 375mm with 500mm X travel; automatic tool changer accommodating 24 tools; linear scales on all axes; tool probe and workpiece probe; spindle speed of ≥18,000 RPM; filtration system for recirculating coolant; and heat shrink tool for cutting tool mounting. Offerors must complete the addendum by identifying their proposed delivery date and explicitly stating acceptance of all technical requirements or detailing specific exceptions with reference to applicable documentation. Failure to submit all required documentation may result in withdrawal from consideration.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Addendum and Acknowledgement Doc.doc | DOC document | |
| ANL-70B Reps and Certs Long-13-JAN-2025.PDF | ||
| ANL-70 Request for Quotation.doc | DOC document | |
| Appendix A-71COM-22-OCT-2025.PDF | ||
| ANL-366L (on-site low risk)-01-OCT-2024.PDF |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Purchase Req G6-113034
Lowest Price Technically Acceptable – Procurement Strategy
Dated 05/21/2026 – Addendum to Supplier Quote
(TO BE FILLED OUT BY ALL OFFEROR’S – areas in red below) PROCUREMENT DESCRIPTION: This procurement is to purchase a CNC Ultrasonic Machining Center, including installation, calibration, supervision, and on-site operator training.
1. Delivery at ANL is requested in 5 months or less. Supplier to provide their best schedule including delivery, including installation, calibration, supervision, and on-site operator training..
___________________(Manufacturing Company Name) will provide all items no later than ______________.
2. System to perform Ultrasonic Machining capable of cutting hard and brittle crystalline and ceramic materials.
___________________(Manufacturing Company Name) takes the following exceptions to the technical requirements:
List each exception (if there are no exceptions, please state all requirements will be met).
3. Workpiece size of 475mm x 375mm (500mm X travel)
___________________(Manufacturing Company Name) takes the following exceptions to the technical requirements:
List each exception (if there are no exceptions, please state all requirements will be met).
4. The system includes an automatic tool changer that can accommodate 24 tools.
___________________(Manufacturing Company Name) takes the following exceptions to the technical requirements:
List each exception (if there are no exceptions, please state all requirements will be met).
5. Units shall have linear scales on all axes.
___________________(Manufacturing Company Name) takes the following exceptions to the technical requirements:
List each exception (if there are no exceptions, please state all requirements will be met).
5.
Units shall have a tool probe.
___________________(Manufacturing Company Name) takes the following exceptions to the technical requirements:
List each exception (if there are no exceptions, please state all requirements will be met).
6. Unit shall have a workpiece probe.
___________________(Manufacturing Company Name) takes the following exceptions to the technical requirements:
List each exception (if there are no exceptions, please state all requirements will be met).
7. Unit shall have an >/=18krpm spindle.
___________________(Manufacturing Company Name) takes the following exceptions to the technical requirements:
List each exception (if there are no exceptions, please state all requirements will be met).
8. Unit shall have a filtration system for recirculating coolant.
___________________(Manufacturing Company Name) takes the following exceptions to the technical requirements:
List each exception (if there are no exceptions, please state all requirements will be met).
9. Unit shall have heat shrink tool for cutting tool mounting.
___________________(Manufacturing Company Name) takes the following exceptions to the technical requirements:
List each exception (if there are no exceptions, please state all requirements will be met).
Please sign and date:
Approval ____________________________
Manufacturing Company Rep
Date
File details come from the government source that posted it. Updated .