CC-5450-23_Technical_Drawings.pdf
PDF 21 MB Posted
- Attached to
- Wekiva Golf Course Irrigation System
- Solicitation number
- CC-5450-23/HSM
- Issued by
- Seminole County, Florida
About this file
These are 100% irrigation plans prepared by Prevost Stamper Incorporated for the Wekiva Golf Club irrigation system project in Seminole County, Florida. The technical drawings detail a comprehensive renovation of the existing golf course irrigation infrastructure, including the installation of a new central control system, a reclaimed water booster pump station, and connection to an existing well for emergency backup water supply. The project involves replacing the current irrigation system with new components such as HDPE mainline pipes, lateral lines, control valves, rotor heads, and spray heads across multiple golf course sections. The plans are dated August 21, 2023, and are marked "NOT FOR CONSTRUCTION", suggesting they are in the design/bid preparation phase.
The technical drawings provide extensive specifications for the new irrigation system, including a dual 30 HP variable frequency drive (VFD) booster pump station with a 120-micron auto-flush filter, capable of maintaining 110 PSI water pressure at a maximum 1,000 GPM flow rate. The system will utilize reclaimed water and include a renovated 75 HP backup irrigation well designed to deliver 800-1,000 GPM at 100-110 PSI. The plans outline detailed installation requirements for pipe routing, valve placement, control cable wiring, grounding systems, and GPS mapping of irrigation heads and control valves. The project appears to be funded through Seminole County and is part of a comprehensive infrastructure upgrade for the Wekiva Golf Club, with an estimated project cost of $2,150,000.00.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Issued for:
Sheet Number:
Date:
I R
R
IG
A T
IO
N
P L A
N S
W e k iv a C lu b C t.
L o n gw o o d F L
W E K
IV
A
G O
L F C
L U
B S e m in o le
C o u n ty
F lo ri d a
Date:
Drawn by:
Job Number:
Reviewed by:
08/16/23
150 WEST JESSUP AVENUE
LONGWOOD, FLORIDA 32750
407.667.1777
NOT FOR
CONSTRUCTION
PSI
MLP
230211
Prevost Stamper Incorporated
600 Edwards St #7102 Celebration, Florida 34747 phone (407) 566-9009 fax (407) 566-9008 www.designpsi.com
An Irrigation Design Company
WEKIVA GOLF CLUB
100% IRRIGATION PLANS
AUGUST 21, 2023
Prepared For
SEMINOLE COUNTY
LA000
C O
V E R
S H
E E T http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com
PUM
P
" R
W M
AIN
PG
PG
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" AIR
RELEASE
VALVE
2" STUB
OUT
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
W
ELL
NEW RECLAIMED WATER BOOSTER PUMP STATION
1. CLOSE THE EXISTING RECLAIMED MAINLINE GATE VALVE.
2. PRESERVE IN PLACE THE EXISTING EXISTING WATER METER AND DOUBLE CHECK BACKFLOW
PREVENTER.
3. REMOVE EXISTING 10" PRESSURE REDUCING VALVE AND CONCRETE VAULT.
4. CONNECT NEW 10" DR11 RECLAIMED HDPE PIPE TO DOWNSTREAM SIDE OF BACKFLOW AND
EXTEND TO PUMP LOCATION.
5. INSTALL A NEW VFD BOOSTER PUMP STATION + FLOW SENSOR + POWDER COATED ENCLOSURE + CONCRETE PAD. 6. WIRE FLOW SENSOR INTO IRRIGATION CONTROL CABLE + SENSOR DECODER.
7. PUMP STATION TO MAINTAIN 110 PSI WATER PRESSURE TO THE IRRIGATION SYSTEM AT A
MAXIMUM 1,000 GPM FLOW RATE.
8. PROVIDE 10" HDPE BYPASS PIPE AND VALVES.
9. INSTALL 10" CLA-VAL 100-01 HYTROL PRESSURE REDUCING VALVE ON DISCHARGE SIDE OF PUMP
STATION.
10. CONNECT HDPE DISCHARGE LINE TO IRRIGATION MAINLINE.
11. WIRE PUMP EQUIPMENT INTO 460 VOLT THREE PHASE POWER PROVIDED BY THE PROJECT
ELECTRICAL CONTRACTOR.
SEE PUMP SPECIFICATIONS FOR COMPLETE SCOPE OF WELL WORK.
NEW GOLF BACK UP IRRIGATION WELL FOR EMERGENCY BACK UP
WATER SUPPLY.
1. DISCONNECT WELL FROM EXISTING POWER SERVICE.
2. DEMO AND REMOVE EXISTING WELL SHELTER.
3. REMOVE EXISTING WELL PUMP MOTOR, SHAFT AND BOWLS
4. REMOVE EXISTING WELL DISCHARGE PIPES AND VALVES
5. PRESERVE IN PLACE THE EXISTING IRRIGATION WELL CASING.
6. PROVIDE AIR FLOW TEST ON EXISTING WELL
7. INSTALL NEW 75HP WELL PUMP MOTOR ON NEW DISCHARGE HEAD
8. INSTALL NEW WELL SHAFT AND BOWLS TO DELIVER 800 GPM AT 100
PSI.
9. INSTALL NEW VFD WELL CONTROLS IN UL RATED CABINET
10. INSTALL NEW FLOW SENSOR AND WIRE INTO WELL CONTROLS
11. CONNECT WELL DISCHARGE TO 10" IRRIGATION MAIN WITH GATE
VALVE.
12. PROVIDE GROUNDING PER MANUFACTURER'S SPECIFICATIONS.
13. WIRE WELL EQUIPMENT INTO 460 VOLT THREE PHASE POWER
PROVIDED BY THE PROJECT ELECTRICAL CONTRACTOR.
SEE WELL SPECIFICATIONS FOR COMPLETE SCOPE OF WELL WORK.
NEW GOLF IRRIGATION CENTRAL CONTROL SYSTEM
1. INSTALL A NEW GOLF IRRIGATION CENTRAL CONTROL
APPLICATION ON THE EXISTING INTERNET CONNECTED
CONTROLLER IN THE GOLF COURSE SUPERINTENDENT'S
OFFICE.
2. PROVIDE LABOR AND MATERIALS TO RUN CONTROL CABLES
INTO AND THROUGH THE BUILDING TO THE CONTROLLER
INTERFACE UNIT.
3. PROVIDE GROUNDING AND SURGE DEVICES ON EACH
CONTROL CABLE PER MANUFACTURER'S SPECIFICATIONS.
4. PROVIDE GPS SERVICES TO LOCATE ALL IRRIGATION HEADS
AND CONTROL VALVES.
5. PROVIDE MAP FROM GPS DATA AND LOAD MAP INTO THE
CENTRAL CONTROLLER.
6. LOAD CONTROL PROGRAM DATA INTO THE CENTRAL
CONTROLLER PER SUPERINTENDENT'S DIRECTION.
ICI
CONNECT NEW LATERAL LINE FROM NEW
CONTROL VALVE TO THE EXISTING CLUB
HOUSE LANDSCAPE IRRIGATION SYSTEM.
FIELD VERIFY THE EXISTING POC
LOCATION IN THE FIELD.
WASH DOWN VALVE
IN EQUIPMENT YARD.
SPRAY ZONE
FOR ROADWAY
LANDSCAPE.
DRIP ZONE FOR
ROADWAY
LANDSCAPE
UNDER TREES.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR HALFWAY
HOUSE
LANDSCAPE.
ROTOR ZONE
FOR PUMP
HOUSE
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR SLOPE
AREA.
SPRAY ZONE
FOR NARROW
AREA.
WEATHER STATION
WIRE SENSOR
CABLE INTO THE ICI.
NEW GOLF IRRIGATION CENTRAL CONTROL SYSTEM
1. INSTALL A NEW GOLF IRRIGATION CENTRAL CONTROL
APPLICATION ON THE EXISTING INTERNET CONNECTED
CONTROLLER IN THE GOLF COURSE SUPERINTENDENT'S
OFFICE.
2. PROVIDE LABOR AND MATERIALS TO RUN CONTROL CABLES
INTO AND THROUGH THE BUILDING TO THE CONTROLLER
INTERFACE UNIT.
3. PROVIDE GROUNDING AND SURGE DEVICES ON EACH
CONTROL CABLE PER MANUFACTURER'S SPECIFICATIONS.
4. PROVIDE GPS SERVICES TO LOCATE ALL IRRIGATION HEADS
AND CONTROL VALVES.
5. PROVIDE MAP FROM GPS DATA AND LOAD MAP INTO THE
CENTRAL CONTROLLER.
6. LOAD CONTROL PROGRAM DATA INTO THE CENTRAL
CONTROLLER PER SUPERINTENDENT'S DIRECTION.
PRV
PRESSURE
REDUCING
VALVE ON
DOWNSTREAM
SIDE OF PUMP
STATION.
SGG
Issued for:
Sheet Number:
Date:
I R
R
IG
A T
IO
N
P L A
N S
W e k iv a C lu b C t.
L o n gw o o d F L
W E K
IV
A
G O
L F C
L U
B S e m in o le
C o u n ty
F lo ri d a
Date:
Drawn by:
Job Number:
Reviewed by:
08/16/23
150 WEST JESSUP AVENUE
LONGWOOD, FLORIDA 32750
407.667.1777
NOT FOR
CONSTRUCTION
PSI
MLP
230211
Prevost Stamper Incorporated
600 Edwards St #7102 Celebration, Florida 34747 phone (407) 566-9009 fax (407) 566-9008 www.designpsi.com
An Irrigation Design Company
0 175 350
SCALE: 1" = 175'
LA000.A
O V
E R
A L L I R
R
IG
A T
IO
N
P L A
N http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com
" R
W M
AIN
PG
PG
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" AIR
RELEASE
VALVE
2" STUB
OUT
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
W
ELL
NEW RECLAIMED WATER BOOSTER PUMP STATION
1. CLOSE THE EXISTING RECLAIMED MAINLINE GATE VALVE.
2. PRESERVE IN PLACE THE EXISTING EXISTING WATER METER AND DOUBLE CHECK BACKFLOW
PREVENTER.
3. REMOVE EXISTING 10" PRESSURE REDUCING VALVE AND CONCRETE VAULT.
4. CONNECT NEW 10" DR11 RECLAIMED HDPE PIPE TO DOWNSTREAM SIDE OF BACKFLOW AND
EXTEND TO PUMP LOCATION.
5. INSTALL A NEW VFD BOOSTER PUMP STATION + FLOW SENSOR + POWDER COATED ENCLOSURE + CONCRETE PAD. 6. WIRE FLOW SENSOR INTO IRRIGATION CONTROL CABLE + SENSOR DECODER.
7. PUMP STATION TO MAINTAIN 110 PSI WATER PRESSURE TO THE IRRIGATION SYSTEM AT A
MAXIMUM 1,000 GPM FLOW RATE.
8. PROVIDE 10" HDPE BYPASS PIPE AND VALVES.
9. INSTALL 10" CLA-VAL 100-01 HYTROL PRESSURE REDUCING VALVE ON DISCHARGE SIDE OF PUMP
STATION.
10. CONNECT HDPE DISCHARGE LINE TO IRRIGATION MAINLINE.
11. WIRE PUMP EQUIPMENT INTO 460 VOLT THREE PHASE POWER PROVIDED BY THE PROJECT
ELECTRICAL CONTRACTOR.
SEE PUMP SPECIFICATIONS FOR COMPLETE SCOPE OF WELL WORK.
NEW GOLF BACK UP IRRIGATION WELL FOR EMERGENCY BACK UP
WATER SUPPLY.
1. DISCONNECT WELL FROM EXISTING POWER SERVICE.
2. DEMO AND REMOVE EXISTING WELL SHELTER.
3. REMOVE EXISTING WELL PUMP MOTOR, SHAFT AND BOWLS
4. REMOVE EXISTING WELL DISCHARGE PIPES AND VALVES
5. PRESERVE IN PLACE THE EXISTING IRRIGATION WELL CASING.
6. PROVIDE AIR FLOW TEST ON EXISTING WELL
7. INSTALL NEW 75HP WELL PUMP MOTOR ON NEW DISCHARGE HEAD
8. INSTALL NEW WELL SHAFT AND BOWLS TO DELIVER 800 GPM AT 100
PSI.
9. INSTALL NEW VFD WELL CONTROLS IN UL RATED CABINET
10. INSTALL NEW FLOW SENSOR AND WIRE INTO WELL CONTROLS
11. CONNECT WELL DISCHARGE TO 10" IRRIGATION MAIN WITH GATE
VALVE.
12. PROVIDE GROUNDING PER MANUFACTURER'S SPECIFICATIONS.
13. WIRE WELL EQUIPMENT INTO 460 VOLT THREE PHASE POWER
PROVIDED BY THE PROJECT ELECTRICAL CONTRACTOR.
SEE WELL SPECIFICATIONS FOR COMPLETE SCOPE OF WELL WORK.
NEW GOLF IRRIGATION CENTRAL CONTROL SYSTEM
1. INSTALL A NEW GOLF IRRIGATION CENTRAL CONTROL
APPLICATION ON THE EXISTING INTERNET CONNECTED
CONTROLLER IN THE GOLF COURSE SUPERINTENDENT'S
OFFICE.
2. PROVIDE LABOR AND MATERIALS TO RUN CONTROL CABLES
INTO AND THROUGH THE BUILDING TO THE CONTROLLER
INTERFACE UNIT.
3. PROVIDE GROUNDING AND SURGE DEVICES ON EACH
CONTROL CABLE PER MANUFACTURER'S SPECIFICATIONS.
4. PROVIDE GPS SERVICES TO LOCATE ALL IRRIGATION HEADS
AND CONTROL VALVES.
5. PROVIDE MAP FROM GPS DATA AND LOAD MAP INTO THE
CENTRAL CONTROLLER.
6. LOAD CONTROL PROGRAM DATA INTO THE CENTRAL
CONTROLLER PER SUPERINTENDENT'S DIRECTION.
ICI
CONNECT NEW LATERAL LINE FROM NEW
CONTROL VALVE TO THE EXISTING CLUB
HOUSE LANDSCAPE IRRIGATION SYSTEM.
FIELD VERIFY THE EXISTING POC
LOCATION IN THE FIELD.
WASH DOWN VALVE
IN EQUIPMENT YARD.
SPRAY ZONE
FOR ROADWAY
LANDSCAPE.
DRIP ZONE FOR
ROADWAY
LANDSCAPE
UNDER TREES.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR HALFWAY
HOUSE
LANDSCAPE.
ROTOR ZONE
FOR PUMP
HOUSE
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR SLOPE
AREA.
SPRAY ZONE
FOR NARROW
AREA.
WEATHER STATION
WIRE SENSOR
CABLE INTO THE ICI.
NEW GOLF IRRIGATION CENTRAL CONTROL SYSTEM
1. INSTALL A NEW GOLF IRRIGATION CENTRAL CONTROL
APPLICATION ON THE EXISTING INTERNET CONNECTED
CONTROLLER IN THE GOLF COURSE SUPERINTENDENT'S
OFFICE.
2. PROVIDE LABOR AND MATERIALS TO RUN CONTROL CABLES
INTO AND THROUGH THE BUILDING TO THE CONTROLLER
INTERFACE UNIT.
3. PROVIDE GROUNDING AND SURGE DEVICES ON EACH
CONTROL CABLE PER MANUFACTURER'S SPECIFICATIONS.
4. PROVIDE GPS SERVICES TO LOCATE ALL IRRIGATION HEADS
AND CONTROL VALVES.
5. PROVIDE MAP FROM GPS DATA AND LOAD MAP INTO THE
CENTRAL CONTROLLER.
6. LOAD CONTROL PROGRAM DATA INTO THE CENTRAL
CONTROLLER PER SUPERINTENDENT'S DIRECTION.
PRV
PRESSURE
REDUCING
VALVE ON
DOWNSTREAM
SIDE OF PUMP
STATION.
SGG
Issued for:
Sheet Number:
Date:
I R
R
IG
A T
IO
N
P L A
N S
W e k iv a C lu b C t.
L o n gw o o d F L
W E K
IV
A
G O
L F C
L U
B S e m in o le
C o u n ty
F lo ri d a
Date:
Drawn by:
Job Number:
Reviewed by:
08/16/23
150 WEST JESSUP AVENUE
LONGWOOD, FLORIDA 32750
407.667.1777
NOT FOR
CONSTRUCTION
PSI
MLP
230211
Prevost Stamper Incorporated
600 Edwards St #7102 Celebration, Florida 34747 phone (407) 566-9009 fax (407) 566-9008 www.designpsi.com
An Irrigation Design Company
0 175 350
SCALE: 1" = 175'
LA000.B
O V
E R
A L L I R
R
IG
A T
IO
N
P L A
N http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com
" R
W M
AIN
PG
PG
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" AIR
RELEASE
VALVE
2" STUB
OUT
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
W
ELL
NEW RECLAIMED WATER BOOSTER PUMP STATION
1. CLOSE THE EXISTING RECLAIMED MAINLINE GATE VALVE.
2. PRESERVE IN PLACE THE EXISTING EXISTING WATER METER AND DOUBLE CHECK BACKFLOW
PREVENTER.
3. REMOVE EXISTING 10" PRESSURE REDUCING VALVE AND CONCRETE VAULT.
4. CONNECT NEW 10" DR11 RECLAIMED HDPE PIPE TO DOWNSTREAM SIDE OF BACKFLOW AND
EXTEND TO PUMP LOCATION.
5. INSTALL A NEW VFD BOOSTER PUMP STATION + FLOW SENSOR + POWDER COATED ENCLOSURE + CONCRETE PAD. 6. WIRE FLOW SENSOR INTO IRRIGATION CONTROL CABLE + SENSOR DECODER.
7. PUMP STATION TO MAINTAIN 110 PSI WATER PRESSURE TO THE IRRIGATION SYSTEM AT A
MAXIMUM 1,000 GPM FLOW RATE.
8. PROVIDE 10" HDPE BYPASS PIPE AND VALVES.
9. INSTALL 10" CLA-VAL 100-01 HYTROL PRESSURE REDUCING VALVE ON DISCHARGE SIDE OF PUMP
STATION.
10. CONNECT HDPE DISCHARGE LINE TO IRRIGATION MAINLINE.
11. WIRE PUMP EQUIPMENT INTO 460 VOLT THREE PHASE POWER PROVIDED BY THE PROJECT
ELECTRICAL CONTRACTOR.
SEE PUMP SPECIFICATIONS FOR COMPLETE SCOPE OF WELL WORK.
NEW GOLF BACK UP IRRIGATION WELL FOR EMERGENCY BACK UP
WATER SUPPLY.
1. DISCONNECT WELL FROM EXISTING POWER SERVICE.
2. DEMO AND REMOVE EXISTING WELL SHELTER.
3. REMOVE EXISTING WELL PUMP MOTOR, SHAFT AND BOWLS
4. REMOVE EXISTING WELL DISCHARGE PIPES AND VALVES
5. PRESERVE IN PLACE THE EXISTING IRRIGATION WELL CASING.
6. PROVIDE AIR FLOW TEST ON EXISTING WELL
7. INSTALL NEW 75HP WELL PUMP MOTOR ON NEW DISCHARGE HEAD
8. INSTALL NEW WELL SHAFT AND BOWLS TO DELIVER 800 GPM AT 100
PSI.
9. INSTALL NEW VFD WELL CONTROLS IN UL RATED CABINET
10. INSTALL NEW FLOW SENSOR AND WIRE INTO WELL CONTROLS
11. CONNECT WELL DISCHARGE TO 10" IRRIGATION MAIN WITH GATE
VALVE.
12. PROVIDE GROUNDING PER MANUFACTURER'S SPECIFICATIONS.
13. WIRE WELL EQUIPMENT INTO 460 VOLT THREE PHASE POWER
PROVIDED BY THE PROJECT ELECTRICAL CONTRACTOR.
SEE WELL SPECIFICATIONS FOR COMPLETE SCOPE OF WELL WORK.
NEW GOLF IRRIGATION CENTRAL CONTROL SYSTEM
1. INSTALL A NEW GOLF IRRIGATION CENTRAL CONTROL
APPLICATION ON THE EXISTING INTERNET CONNECTED
CONTROLLER IN THE GOLF COURSE SUPERINTENDENT'S
OFFICE.
2. PROVIDE LABOR AND MATERIALS TO RUN CONTROL CABLES
INTO AND THROUGH THE BUILDING TO THE CONTROLLER
INTERFACE UNIT.
3. PROVIDE GROUNDING AND SURGE DEVICES ON EACH
CONTROL CABLE PER MANUFACTURER'S SPECIFICATIONS.
4. PROVIDE GPS SERVICES TO LOCATE ALL IRRIGATION HEADS
AND CONTROL VALVES.
5. PROVIDE MAP FROM GPS DATA AND LOAD MAP INTO THE
CENTRAL CONTROLLER.
6. LOAD CONTROL PROGRAM DATA INTO THE CENTRAL
CONTROLLER PER SUPERINTENDENT'S DIRECTION.
ICI
CONNECT NEW LATERAL LINE FROM NEW
CONTROL VALVE TO THE EXISTING CLUB
HOUSE LANDSCAPE IRRIGATION SYSTEM.
FIELD VERIFY THE EXISTING POC
LOCATION IN THE FIELD.
WASH DOWN VALVE
IN EQUIPMENT YARD.
SPRAY ZONE
FOR ROADWAY
LANDSCAPE.
DRIP ZONE FOR
ROADWAY
LANDSCAPE
UNDER TREES.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR HALFWAY
HOUSE
LANDSCAPE.
ROTOR ZONE
FOR PUMP
HOUSE
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR SLOPE
AREA.
SPRAY ZONE
FOR NARROW
AREA.
WEATHER STATION
WIRE SENSOR
CABLE INTO THE ICI.
NEW GOLF IRRIGATION CENTRAL CONTROL SYSTEM
1. INSTALL A NEW GOLF IRRIGATION CENTRAL CONTROL
APPLICATION ON THE EXISTING INTERNET CONNECTED
CONTROLLER IN THE GOLF COURSE SUPERINTENDENT'S
OFFICE.
2. PROVIDE LABOR AND MATERIALS TO RUN CONTROL CABLES
INTO AND THROUGH THE BUILDING TO THE CONTROLLER
INTERFACE UNIT.
3. PROVIDE GROUNDING AND SURGE DEVICES ON EACH
CONTROL CABLE PER MANUFACTURER'S SPECIFICATIONS.
4. PROVIDE GPS SERVICES TO LOCATE ALL IRRIGATION HEADS
AND CONTROL VALVES.
5. PROVIDE MAP FROM GPS DATA AND LOAD MAP INTO THE
CENTRAL CONTROLLER.
6. LOAD CONTROL PROGRAM DATA INTO THE CENTRAL
CONTROLLER PER SUPERINTENDENT'S DIRECTION.
PRV
PRESSURE
REDUCING
VALVE ON
DOWNSTREAM
SIDE OF PUMP
STATION.
SGG
Issued for:
Sheet Number:
Date:
I R
R
IG
A T
IO
N
P L A
N S
W e k iv a C lu b C t.
L o n gw o o d F L
W E K
IV
A
G O
L F C
L U
B S e m in o le
C o u n ty
F lo ri d a
Date:
Drawn by:
Job Number:
Reviewed by:
08/16/23
150 WEST JESSUP AVENUE
LONGWOOD, FLORIDA 32750
407.667.1777
NOT FOR
CONSTRUCTION
PSI
MLP
230211
Prevost Stamper Incorporated
600 Edwards St #7102 Celebration, Florida 34747 phone (407) 566-9009 fax (407) 566-9008 www.designpsi.com
An Irrigation Design Company
0 175 350
SCALE: 1" = 175'
LA810 LA811
LA812 LA813
LA800.A
IR
R
IG
A
T
IO
N K
E Y
S H
E E T http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com
" R
W M
AIN
PG
PG
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" AIR
RELEASE
VALVE
2" STUB
OUT
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
W
ELL
NEW RECLAIMED WATER BOOSTER PUMP STATION
1. CLOSE THE EXISTING RECLAIMED MAINLINE GATE VALVE.
2. PRESERVE IN PLACE THE EXISTING EXISTING WATER METER AND DOUBLE CHECK BACKFLOW
PREVENTER.
3. REMOVE EXISTING 10" PRESSURE REDUCING VALVE AND CONCRETE VAULT.
4. CONNECT NEW 10" DR11 RECLAIMED HDPE PIPE TO DOWNSTREAM SIDE OF BACKFLOW AND
EXTEND TO PUMP LOCATION.
5. INSTALL A NEW VFD BOOSTER PUMP STATION + FLOW SENSOR + POWDER COATED ENCLOSURE + CONCRETE PAD. 6. WIRE FLOW SENSOR INTO IRRIGATION CONTROL CABLE + SENSOR DECODER.
7. PUMP STATION TO MAINTAIN 110 PSI WATER PRESSURE TO THE IRRIGATION SYSTEM AT A
MAXIMUM 1,000 GPM FLOW RATE.
8. PROVIDE 10" HDPE BYPASS PIPE AND VALVES.
9. INSTALL 10" CLA-VAL 100-01 HYTROL PRESSURE REDUCING VALVE ON DISCHARGE SIDE OF PUMP
STATION.
10. CONNECT HDPE DISCHARGE LINE TO IRRIGATION MAINLINE.
11. WIRE PUMP EQUIPMENT INTO 460 VOLT THREE PHASE POWER PROVIDED BY THE PROJECT
ELECTRICAL CONTRACTOR.
SEE PUMP SPECIFICATIONS FOR COMPLETE SCOPE OF WELL WORK.
NEW GOLF BACK UP IRRIGATION WELL FOR EMERGENCY BACK UP
WATER SUPPLY.
1. DISCONNECT WELL FROM EXISTING POWER SERVICE.
2. DEMO AND REMOVE EXISTING WELL SHELTER.
3. REMOVE EXISTING WELL PUMP MOTOR, SHAFT AND BOWLS
4. REMOVE EXISTING WELL DISCHARGE PIPES AND VALVES
5. PRESERVE IN PLACE THE EXISTING IRRIGATION WELL CASING.
6. PROVIDE AIR FLOW TEST ON EXISTING WELL
7. INSTALL NEW 75HP WELL PUMP MOTOR ON NEW DISCHARGE HEAD
8. INSTALL NEW WELL SHAFT AND BOWLS TO DELIVER 800 GPM AT 100
PSI.
9. INSTALL NEW VFD WELL CONTROLS IN UL RATED CABINET
10. INSTALL NEW FLOW SENSOR AND WIRE INTO WELL CONTROLS
11. CONNECT WELL DISCHARGE TO 10" IRRIGATION MAIN WITH GATE
VALVE.
12. PROVIDE GROUNDING PER MANUFACTURER'S SPECIFICATIONS.
13. WIRE WELL EQUIPMENT INTO 460 VOLT THREE PHASE POWER
PROVIDED BY THE PROJECT ELECTRICAL CONTRACTOR.
SEE WELL SPECIFICATIONS FOR COMPLETE SCOPE OF WELL WORK.
NEW GOLF IRRIGATION CENTRAL CONTROL SYSTEM
1. INSTALL A NEW GOLF IRRIGATION CENTRAL CONTROL
APPLICATION ON THE EXISTING INTERNET CONNECTED
CONTROLLER IN THE GOLF COURSE SUPERINTENDENT'S
OFFICE.
2. PROVIDE LABOR AND MATERIALS TO RUN CONTROL CABLES
INTO AND THROUGH THE BUILDING TO THE CONTROLLER
INTERFACE UNIT.
3. PROVIDE GROUNDING AND SURGE DEVICES ON EACH
CONTROL CABLE PER MANUFACTURER'S SPECIFICATIONS.
4. PROVIDE GPS SERVICES TO LOCATE ALL IRRIGATION HEADS
AND CONTROL VALVES.
5. PROVIDE MAP FROM GPS DATA AND LOAD MAP INTO THE
CENTRAL CONTROLLER.
6. LOAD CONTROL PROGRAM DATA INTO THE CENTRAL
CONTROLLER PER SUPERINTENDENT'S DIRECTION.
ICI
CONNECT NEW LATERAL LINE FROM NEW
CONTROL VALVE TO THE EXISTING CLUB
HOUSE LANDSCAPE IRRIGATION SYSTEM.
FIELD VERIFY THE EXISTING POC
LOCATION IN THE FIELD.
WASH DOWN VALVE
IN EQUIPMENT YARD.
SPRAY ZONE
FOR ROADWAY
LANDSCAPE.
DRIP ZONE FOR
ROADWAY
LANDSCAPE
UNDER TREES.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR HALFWAY
HOUSE
LANDSCAPE.
ROTOR ZONE
FOR PUMP
HOUSE
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR SLOPE
AREA.
SPRAY ZONE
FOR NARROW
AREA.
WEATHER STATION
WIRE SENSOR
CABLE INTO THE ICI.
NEW GOLF IRRIGATION CENTRAL CONTROL SYSTEM
1. INSTALL A NEW GOLF IRRIGATION CENTRAL CONTROL
APPLICATION ON THE EXISTING INTERNET CONNECTED
CONTROLLER IN THE GOLF COURSE SUPERINTENDENT'S
OFFICE.
2. PROVIDE LABOR AND MATERIALS TO RUN CONTROL CABLES
INTO AND THROUGH THE BUILDING TO THE CONTROLLER
INTERFACE UNIT.
3. PROVIDE GROUNDING AND SURGE DEVICES ON EACH
CONTROL CABLE PER MANUFACTURER'S SPECIFICATIONS.
4. PROVIDE GPS SERVICES TO LOCATE ALL IRRIGATION HEADS
AND CONTROL VALVES.
5. PROVIDE MAP FROM GPS DATA AND LOAD MAP INTO THE
CENTRAL CONTROLLER.
6. LOAD CONTROL PROGRAM DATA INTO THE CENTRAL
CONTROLLER PER SUPERINTENDENT'S DIRECTION.
PRV
PRESSURE
REDUCING
VALVE ON
DOWNSTREAM
SIDE OF PUMP
STATION.
SGG
Issued for:
Sheet Number:
Date:
I R
R
IG
A T
IO
N
P L A
N S
W e k iv a C lu b C t.
L o n gw o o d F L
W E K
IV
A
G O
L F C
L U
B S e m in o le
C o u n ty
F lo ri d a
Date:
Drawn by:
Job Number:
Reviewed by:
08/16/23
150 WEST JESSUP AVENUE
LONGWOOD, FLORIDA 32750
407.667.1777
NOT FOR
CONSTRUCTION
PSI
MLP
230211
Prevost Stamper Incorporated
600 Edwards St #7102 Celebration, Florida 34747 phone (407) 566-9009 fax (407) 566-9008 www.designpsi.com
An Irrigation Design Company
0 175 350
SCALE: 1" = 175'
LA810 LA811
LA812 LA813
LA800.B
IR
R
IG
A
T
IO
N K
E Y
S H
E E T http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com
PG
PG
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
NEW GOLF IRRIGATION CENTRAL CONTROL SYSTEM
1. INSTALL A NEW GOLF IRRIGATION CENTRAL CONTROL
APPLICATION ON THE EXISTING INTERNET CONNECTED
CONTROLLER IN THE GOLF COURSE SUPERINTENDENT'S
OFFICE.
2. PROVIDE LABOR AND MATERIALS TO RUN CONTROL CABLES
INTO AND THROUGH THE BUILDING TO THE CONTROLLER
INTERFACE UNIT.
3. PROVIDE GROUNDING AND SURGE DEVICES ON EACH
CONTROL CABLE PER MANUFACTURER'S SPECIFICATIONS.
4. PROVIDE GPS SERVICES TO LOCATE ALL IRRIGATION HEADS
AND CONTROL VALVES.
5. PROVIDE MAP FROM GPS DATA AND LOAD MAP INTO THE
CENTRAL CONTROLLER.
6. LOAD CONTROL PROGRAM DATA INTO THE CENTRAL
CONTROLLER PER SUPERINTENDENT'S DIRECTION.
ICI
CONNECT NEW LATERAL LINE FROM NEW
CONTROL VALVE TO THE EXISTING CLUB
HOUSE LANDSCAPE IRRIGATION SYSTEM.
FIELD VERIFY THE EXISTING POC
LOCATION IN THE FIELD.
WASH DOWN VALVE
IN EQUIPMENT YARD.
SPRAY ZONE
FOR ROADWAY
LANDSCAPE.
DRIP ZONE FOR
ROADWAY
LANDSCAPE
UNDER TREES.
WEATHER STATION
WIRE SENSOR
CABLE INTO THE ICI.
NEW GOLF IRRIGATION CENTRAL CONTROL SYSTEM
1. INSTALL A NEW GOLF IRRIGATION CENTRAL CONTROL
APPLICATION ON THE EXISTING INTERNET CONNECTED
CONTROLLER IN THE GOLF COURSE SUPERINTENDENT'S
OFFICE.
2. PROVIDE LABOR AND MATERIALS TO RUN CONTROL CABLES
INTO AND THROUGH THE BUILDING TO THE CONTROLLER
INTERFACE UNIT.
3. PROVIDE GROUNDING AND SURGE DEVICES ON EACH
CONTROL CABLE PER MANUFACTURER'S SPECIFICATIONS.
4. PROVIDE GPS SERVICES TO LOCATE ALL IRRIGATION HEADS
AND CONTROL VALVES.
5. PROVIDE MAP FROM GPS DATA AND LOAD MAP INTO THE
CENTRAL CONTROLLER.
6. LOAD CONTROL PROGRAM DATA INTO THE CENTRAL
CONTROLLER PER SUPERINTENDENT'S DIRECTION.
SGG
Issued for:
Sheet Number:
Date:
I R
R
IG
A T
IO
N
P L A
N S
W e k iv a C lu b C t.
L o n gw o o d F L
W E K
IV
A
G O
L F C
L U
B S e m in o le
C o u n ty
F lo ri d a
Date:
Drawn by:
Job Number:
Reviewed by:
08/16/23
150 WEST JESSUP AVENUE
LONGWOOD, FLORIDA 32750
407.667.1777
NOT FOR
CONSTRUCTION
PSI
MLP
230211
Prevost Stamper Incorporated
600 Edwards St #7102 Celebration, Florida 34747 phone (407) 566-9009 fax (407) 566-9008 www.designpsi.com
An Irrigation Design Company
0 100 200
SCALE: 1" = 100'
LA810.A
IR
R
IG
A
T
IO
N P
L A
N
MATCHLINE: SEE SHEET LA812
M
ATC
H
LIN
E: SEE SH
EET L811
http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com
PG
PG
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
NEW GOLF IRRIGATION CENTRAL CONTROL SYSTEM
1. INSTALL A NEW GOLF IRRIGATION CENTRAL CONTROL
APPLICATION ON THE EXISTING INTERNET CONNECTED
CONTROLLER IN THE GOLF COURSE SUPERINTENDENT'S
OFFICE.
2. PROVIDE LABOR AND MATERIALS TO RUN CONTROL CABLES
INTO AND THROUGH THE BUILDING TO THE CONTROLLER
INTERFACE UNIT.
3. PROVIDE GROUNDING AND SURGE DEVICES ON EACH
CONTROL CABLE PER MANUFACTURER'S SPECIFICATIONS.
4. PROVIDE GPS SERVICES TO LOCATE ALL IRRIGATION HEADS
AND CONTROL VALVES.
5. PROVIDE MAP FROM GPS DATA AND LOAD MAP INTO THE
CENTRAL CONTROLLER.
6. LOAD CONTROL PROGRAM DATA INTO THE CENTRAL
CONTROLLER PER SUPERINTENDENT'S DIRECTION.
ICI
CONNECT NEW LATERAL LINE FROM NEW
CONTROL VALVE TO THE EXISTING CLUB
HOUSE LANDSCAPE IRRIGATION SYSTEM.
FIELD VERIFY THE EXISTING POC
LOCATION IN THE FIELD.
WASH DOWN VALVE
IN EQUIPMENT YARD.
SPRAY ZONE
FOR ROADWAY
LANDSCAPE.
DRIP ZONE FOR
ROADWAY
LANDSCAPE
UNDER TREES.
WEATHER STATION
WIRE SENSOR
CABLE INTO THE ICI.
NEW GOLF IRRIGATION CENTRAL CONTROL SYSTEM
1. INSTALL A NEW GOLF IRRIGATION CENTRAL CONTROL
APPLICATION ON THE EXISTING INTERNET CONNECTED
CONTROLLER IN THE GOLF COURSE SUPERINTENDENT'S
OFFICE.
2. PROVIDE LABOR AND MATERIALS TO RUN CONTROL CABLES
INTO AND THROUGH THE BUILDING TO THE CONTROLLER
INTERFACE UNIT.
3. PROVIDE GROUNDING AND SURGE DEVICES ON EACH
CONTROL CABLE PER MANUFACTURER'S SPECIFICATIONS.
4. PROVIDE GPS SERVICES TO LOCATE ALL IRRIGATION HEADS
AND CONTROL VALVES.
5. PROVIDE MAP FROM GPS DATA AND LOAD MAP INTO THE
CENTRAL CONTROLLER.
6. LOAD CONTROL PROGRAM DATA INTO THE CENTRAL
CONTROLLER PER SUPERINTENDENT'S DIRECTION.
SGG
Issued for:
Sheet Number:
Date:
I R
R
IG
A T
IO
N
P L A
N S
W e k iv a C lu b C t.
L o n gw o o d F L
W E K
IV
A
G O
L F C
L U
B S e m in o le
C o u n ty
F lo ri d a
Date:
Drawn by:
Job Number:
Reviewed by:
08/16/23
150 WEST JESSUP AVENUE
LONGWOOD, FLORIDA 32750
407.667.1777
NOT FOR
CONSTRUCTION
PSI
MLP
230211
Prevost Stamper Incorporated
600 Edwards St #7102 Celebration, Florida 34747 phone (407) 566-9009 fax (407) 566-9008 www.designpsi.com
An Irrigation Design Company
LA810.B
IR
R
IG
A
T
IO
N P
L A
N
MATCHLINE: SEE SHEET LA812
M
ATC
H
LIN
E: SEE SH
EET L811
0 100 200
SCALE: 1" = 100'
http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com
" R
W M
AIN
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" AIR
RELEASE
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
W
ELL
NEW RECLAIMED WATER BOOSTER PUMP STATION
1. CLOSE THE EXISTING RECLAIMED MAINLINE GATE VALVE.
2. PRESERVE IN PLACE THE EXISTING EXISTING WATER METER AND DOUBLE CHECK BACKFLOW
PREVENTER.
3. REMOVE EXISTING 10" PRESSURE REDUCING VALVE AND CONCRETE VAULT.
4. CONNECT NEW 10" DR11 RECLAIMED HDPE PIPE TO DOWNSTREAM SIDE OF BACKFLOW AND
EXTEND TO PUMP LOCATION.
5. INSTALL A NEW VFD BOOSTER PUMP STATION + FLOW SENSOR + POWDER COATED ENCLOSURE + CONCRETE PAD. 6. WIRE FLOW SENSOR INTO IRRIGATION CONTROL CABLE + SENSOR DECODER.
7. PUMP STATION TO MAINTAIN 110 PSI WATER PRESSURE TO THE IRRIGATION SYSTEM AT A
MAXIMUM 1,000 GPM FLOW RATE.
8. PROVIDE 10" HDPE BYPASS PIPE AND VALVES.
9. INSTALL 10" CLA-VAL 100-01 HYTROL PRESSURE REDUCING VALVE ON DISCHARGE SIDE OF PUMP
STATION.
10. CONNECT HDPE DISCHARGE LINE TO IRRIGATION MAINLINE.
11. WIRE PUMP EQUIPMENT INTO 460 VOLT THREE PHASE POWER PROVIDED BY THE PROJECT
ELECTRICAL CONTRACTOR.
SEE PUMP SPECIFICATIONS FOR COMPLETE SCOPE OF WELL WORK.
NEW GOLF BACK UP IRRIGATION WELL FOR EMERGENCY BACK UP
WATER SUPPLY.
1. DISCONNECT WELL FROM EXISTING POWER SERVICE.
2. DEMO AND REMOVE EXISTING WELL SHELTER.
3. REMOVE EXISTING WELL PUMP MOTOR, SHAFT AND BOWLS
4. REMOVE EXISTING WELL DISCHARGE PIPES AND VALVES
5. PRESERVE IN PLACE THE EXISTING IRRIGATION WELL CASING.
6. PROVIDE AIR FLOW TEST ON EXISTING WELL
7. INSTALL NEW 75HP WELL PUMP MOTOR ON NEW DISCHARGE HEAD
8. INSTALL NEW WELL SHAFT AND BOWLS TO DELIVER 800 GPM AT 100
PSI.
9. INSTALL NEW VFD WELL CONTROLS IN UL RATED CABINET
10. INSTALL NEW FLOW SENSOR AND WIRE INTO WELL CONTROLS
11. CONNECT WELL DISCHARGE TO 10" IRRIGATION MAIN WITH GATE
VALVE.
12. PROVIDE GROUNDING PER MANUFACTURER'S SPECIFICATIONS.
13. WIRE WELL EQUIPMENT INTO 460 VOLT THREE PHASE POWER
PROVIDED BY THE PROJECT ELECTRICAL CONTRACTOR.
SEE WELL SPECIFICATIONS FOR COMPLETE SCOPE OF WELL WORK.
ROTOR ZONE
FOR PUMP
HOUSE
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
PRV
PRESSURE
REDUCING
VALVE ON
DOWNSTREAM
SIDE OF PUMP
STATION.
Issued for:
Sheet Number:
Date:
I R
R
IG
A T
IO
N
P L A
N S
W e k iv a C lu b C t.
L o n gw o o d F L
W E K
IV
A
G O
L F C
L U
B S e m in o le
C o u n ty
F lo ri d a
Date:
Drawn by:
Job Number:
Reviewed by:
08/16/23
150 WEST JESSUP AVENUE
LONGWOOD, FLORIDA 32750
407.667.1777
NOT FOR
CONSTRUCTION
PSI
MLP
230211
Prevost Stamper Incorporated
600 Edwards St #7102 Celebration, Florida 34747 phone (407) 566-9009 fax (407) 566-9008 www.designpsi.com
An Irrigation Design Company
0 100 200
SCALE: 1" = 100'
LA811.A
IR
R
IG
A
T
IO
N P
L A
N
MATCHLINE: SEE SHEET LA813
M
AT
C H
LI
N
E:
S
EE
S
H
EE
T
LA
http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com
" R
W M
AIN
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" AIR
RELEASE
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
W
ELL
NEW RECLAIMED WATER BOOSTER PUMP STATION
1. CLOSE THE EXISTING RECLAIMED MAINLINE GATE VALVE.
2. PRESERVE IN PLACE THE EXISTING EXISTING WATER METER AND DOUBLE CHECK BACKFLOW
PREVENTER.
3. REMOVE EXISTING 10" PRESSURE REDUCING VALVE AND CONCRETE VAULT.
4. CONNECT NEW 10" DR11 RECLAIMED HDPE PIPE TO DOWNSTREAM SIDE OF BACKFLOW AND
EXTEND TO PUMP LOCATION.
5. INSTALL A NEW VFD BOOSTER PUMP STATION + FLOW SENSOR + POWDER COATED ENCLOSURE + CONCRETE PAD. 6. WIRE FLOW SENSOR INTO IRRIGATION CONTROL CABLE + SENSOR DECODER.
7. PUMP STATION TO MAINTAIN 110 PSI WATER PRESSURE TO THE IRRIGATION SYSTEM AT A
MAXIMUM 1,000 GPM FLOW RATE.
8. PROVIDE 10" HDPE BYPASS PIPE AND VALVES.
9. INSTALL 10" CLA-VAL 100-01 HYTROL PRESSURE REDUCING VALVE ON DISCHARGE SIDE OF PUMP
STATION.
10. CONNECT HDPE DISCHARGE LINE TO IRRIGATION MAINLINE.
11. WIRE PUMP EQUIPMENT INTO 460 VOLT THREE PHASE POWER PROVIDED BY THE PROJECT
ELECTRICAL CONTRACTOR.
SEE PUMP SPECIFICATIONS FOR COMPLETE SCOPE OF WELL WORK.
NEW GOLF BACK UP IRRIGATION WELL FOR EMERGENCY BACK UP
WATER SUPPLY.
1. DISCONNECT WELL FROM EXISTING POWER SERVICE.
2. DEMO AND REMOVE EXISTING WELL SHELTER.
3. REMOVE EXISTING WELL PUMP MOTOR, SHAFT AND BOWLS
4. REMOVE EXISTING WELL DISCHARGE PIPES AND VALVES
5. PRESERVE IN PLACE THE EXISTING IRRIGATION WELL CASING.
6. PROVIDE AIR FLOW TEST ON EXISTING WELL
7. INSTALL NEW 75HP WELL PUMP MOTOR ON NEW DISCHARGE HEAD
8. INSTALL NEW WELL SHAFT AND BOWLS TO DELIVER 800 GPM AT 100
PSI.
9. INSTALL NEW VFD WELL CONTROLS IN UL RATED CABINET
10. INSTALL NEW FLOW SENSOR AND WIRE INTO WELL CONTROLS
11. CONNECT WELL DISCHARGE TO 10" IRRIGATION MAIN WITH GATE
VALVE.
12. PROVIDE GROUNDING PER MANUFACTURER'S SPECIFICATIONS.
13. WIRE WELL EQUIPMENT INTO 460 VOLT THREE PHASE POWER
PROVIDED BY THE PROJECT ELECTRICAL CONTRACTOR.
SEE WELL SPECIFICATIONS FOR COMPLETE SCOPE OF WELL WORK.
ROTOR ZONE
FOR PUMP
HOUSE
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
PRV
PRESSURE
REDUCING
VALVE ON
DOWNSTREAM
SIDE OF PUMP
STATION.
Issued for:
Sheet Number:
Date:
I R
R
IG
A T
IO
N
P L A
N S
W e k iv a C lu b C t.
L o n gw o o d F L
W E K
IV
A
G O
L F C
L U
B S e m in o le
C o u n ty
F lo ri d a
Date:
Drawn by:
Job Number:
Reviewed by:
08/16/23
150 WEST JESSUP AVENUE
LONGWOOD, FLORIDA 32750
407.667.1777
NOT FOR
CONSTRUCTION
PSI
MLP
230211
Prevost Stamper Incorporated
600 Edwards St #7102 Celebration, Florida 34747 phone (407) 566-9009 fax (407) 566-9008 www.designpsi.com
An Irrigation Design Company
LA811.B
IR
R
IG
A
T
IO
N P
L A
N
MATCHLINE: SEE SHEET LA813
M
AT
C H
LI
N
E:
S
EE
S
H
EE
T
LA
0 100 200
SCALE: 1" = 100'
http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR SLOPE
AREA.
SPRAY ZONE
FOR NARROW
AREA.
Issued for:
Sheet Number:
Date:
I R
R
IG
A T
IO
N
P L A
N S
W e k iv a C lu b C t.
L o n gw o o d F L
W E K
IV
A
G O
L F C
L U
B S e m in o le
C o u n ty
F lo ri d a
Date:
Drawn by:
Job Number:
Reviewed by:
08/16/23
150 WEST JESSUP AVENUE
LONGWOOD, FLORIDA 32750
407.667.1777
NOT FOR
CONSTRUCTION
PSI
MLP
230211
Prevost Stamper Incorporated
600 Edwards St #7102 Celebration, Florida 34747 phone (407) 566-9009 fax (407) 566-9008 www.designpsi.com
An Irrigation Design Company
0 100 200
SCALE: 1" = 100'
LA812.A
IR
R
IG
A
T
IO
N P
L A
N
M
ATC
H
LIN
E: SEE SH
EET L813
MATCHLINE: SEE SHEET LA810
http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" STUB
OUT
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR ROADWAY
LANDSCAPE.
ROTOR ZONE
FOR SLOPE
AREA.
SPRAY ZONE
FOR NARROW
AREA.
Issued for:
Sheet Number:
Date:
I R
R
IG
A T
IO
N
P L A
N S
W e k iv a C lu b C t.
L o n gw o o d F L
W E K
IV
A
G O
L F C
L U
B S e m in o le
C o u n ty
F lo ri d a
Date:
Drawn by:
Job Number:
Reviewed by:
08/16/23
150 WEST JESSUP AVENUE
LONGWOOD, FLORIDA 32750
407.667.1777
NOT FOR
CONSTRUCTION
PSI
MLP
230211
Prevost Stamper Incorporated
600 Edwards St #7102 Celebration, Florida 34747 phone (407) 566-9009 fax (407) 566-9008 www.designpsi.com
An Irrigation Design Company
LA812.B
IR
R
IG
A
T
IO
N P
L A
N
M
ATC
H
LIN
E: SEE SH
EET L813
MATCHLINE: SEE SHEET LA810
0 100 200
SCALE: 1" = 100'
http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com
2" STUB
OUT
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
ROTOR ZONE
FOR HALFWAY
HOUSE
LANDSCAPE.
Issued for:
Sheet Number:
Date:
I R
R
IG
A T
IO
N
P L A
N S
W e k iv a C lu b C t.
L o n gw o o d F L
W E K
IV
A
G O
L F C
L U
B S e m in o le
C o u n ty
F lo ri d a
Date:
Drawn by:
Job Number:
Reviewed by:
08/16/23
150 WEST JESSUP AVENUE
LONGWOOD, FLORIDA 32750
407.667.1777
NOT FOR
CONSTRUCTION
PSI
MLP
230211
Prevost Stamper Incorporated
600 Edwards St #7102 Celebration, Florida 34747 phone (407) 566-9009 fax (407) 566-9008 www.designpsi.com
An Irrigation Design Company
0 100 200
SCALE: 1" = 100'
LA813.A
IR
R
IG
A
T
IO
N P
L A
N
MATCHLINE: SEE SHEET LA811
M
AT
C H
LI
N
E:
S
EE
S
H
EE
T
LA
http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com
2" STUB
OUT
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
2" LOW
POINT
DRAIN
VALVE
VALVE
ROTOR ZONE
FOR HALFWAY
HOUSE
LANDSCAPE.
Issued for:
Sheet Number:
Date:
I R
R
IG
A T
IO
N
P L A
N S
W e k iv a C lu b C t.
L o n gw o o d F L
W E K
IV
A
G O
L F C
L U
B S e m in o le
C o u n ty
F lo ri d a
Date:
Drawn by:
Job Number:
Reviewed by:
08/16/23
150 WEST JESSUP AVENUE
LONGWOOD, FLORIDA 32750
407.667.1777
NOT FOR
CONSTRUCTION
PSI
MLP
230211
Prevost Stamper Incorporated
600 Edwards St #7102 Celebration, Florida 34747 phone (407) 566-9009 fax (407) 566-9008 www.designpsi.com
An Irrigation Design Company
LA813.B
IR
R
IG
A
T
IO
N P
L A
N
MATCHLINE: SEE SHEET LA811
M
AT
C H
LI
N
E:
S
EE
S
H
EE
T
LA
0 100 200
SCALE: 1" = 100'
http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com
1. NOT ALL EXISTING UTILITIES ARE SHOWN ON THE IRRIGATION PLANS. THE IRRIGATION INSTALLER SHALL REPAIR ALL
UTILITIES DAMAGED DUE TO HIS WORK AT NO ADDITIONAL COST TO THE OWNER.
2. LOCATIONS OF ELEMENTS ON THE DRAWINGS ARE SCHEMATIC. EXACT LOCATIONS ARE TO BE VERIFIED IN THE FIELD BY THE INSTALLER. PIPE LINES DRAWN SIDE BY SIDE MAY BE LAID IN THE SAME TRENCH. SOME PIPE LOCATIONS ARE DRAWN OFFSET TO CLEARLY SHOW THE INTENDED PIPE ROUTING. IT SHALL BE THE RESPONSIBILITY OF THE IRRIGATION
INSTALLER TO LOCATE AND INSTALL THE SYSTEM IN A LOGICAL MANNER.
3. THE CONTRACTOR SHALL ADJUST THE IRRIGATION CONTROL SYSTEM, SPRINKLER ARC, AND NOZZLE ADJUSTMENTS TO
PROVIDE THE MOST BALANCED AND EFFICIENT WATER DISTRIBUTION.
4. NO VALVE BOXES ARE TO BE INSTALLED IN ANY FAIRWAYS. CONTRACTOR IS TO VERIFY THE LOCATION OF VALVE BOXES
PRIOR TO INSTALLATION.
5. FIELD ADJUSTMENTS WILL BE MADE IN THE FIELD TO ACCOMMODATE THE GOLF COURSE EXISTING CONDITIONS.
6. CONTRACTOR SHALL VERIFY WITH MAINLINE FITTING AND VALVE MANUFACTURER THAT THE STANDARD OF FITTINGS PURCHASED MATCH WITH THE PIPE SUPPLIED TO THE PROJECT. ANY DISCREPANCIES SHALL BE BROUGHT TO THE
ATTENTION OF THE OWNER AND IRRIGATION CONSULTANT PRIOR TO ORDERING OF MATERIAL.
7. INSTALLATION CREW AND LEADERS SHALL ATTEND MANUFACTURER PROVIDED TRAINING FOR HDPE PIPE AND FITTING INSTALLATION WITH HEAT WELDING EQUIPMENT. EACH INSTALLATION CREW MEMBER AND LEADER SHALL BE CHECKED OUT ON THE WELDING EQUIPMENT BY THE TRAINER AND RECEIVE A CERTIFICATE OF COMPETENCY IN HDPE WELDING AT
THE END OF THE TRAINING FOR THIS PROJECT SPECIFICALLY.
8. INSTALLATION CREW AND LEADERS SHALL ATTEND RAINBIRD /TORO PROVIDED TRAINING FOR CONTROL SYSTEM
INSTALLATION.
9. MAJOR UTILITY SIZES AND APPROXIMATE LOCATIONS ARE INDICATED ON THE PLANS. ALL EXISTING DRAINAGE AND UTILITIES SHOWN ARE PER CITY MAPPING, AND ARE APPROXIMATE ONLY. CONTRACTOR TO VERIFY THE HORIZONTAL
AND VERTICAL DEPTHS PRIOR TO CONSTRUCTION.
10. SEE ELECTRICAL PLANS AND ELECTRICAL SPECIFICATIONS BY THE ELECTRICAL ENGINEERS FOR EXISTING AND NEW ELECTRICAL MATERIALS AND WORKMANSHIP REQUIRED FOR THIS PROJECT. ELECTRICAL DRAWINGS AND
SPECIFICATIONS ARE NOT INCLUDED IN THE IRRIGATION DRAWINGS AND SPECIFICATIONS.
11. TRANSITION TO PVC PIPE AT TWO BRIDGE CROSSINGS WITH FLANGE OR MECHANICAL JOINT TRANSITION COUPLING FITTINGS. PROVIDE HOT DIPPED GALVANIZED RODS AND RISER CLAMS TO SECURE PVC PIPE TO BRIDGE.
12. THE CONTRACTOR SHALL POTHOLE AND VERIFY LOCATIONS OF THE EXISTING RECLAIMED WATER UTILITY LINES AT ALL IRRIGATION
PIPE OR WIRE CROSSINGS.
13. THE CONTRACTOR MAY ONLY HAVE THE WATER SUPPLY OR CONTROL SYSTEM TO ALL HOLES TURNED OFF FOR A MAXIMUM OF 72 HOURS IN ANY ONE WEEK. NOTIFY THE PROJECT MANAGER AND GOLF COURSE SUPERINTENDENT 24 HOURS IN ADVANCE IF THE
WATER SUPPLY OR CONTROL SYSTEM IS TO BE TURNED OFF.
14. REPAIR ALL EXISTING CART PATHS DAMAGED DURING INSTALLATION. PROVIDE LIKE MATERIALS AS REMOVED, AND AT THE SAME
ELEVATION AS ADJACENT PAVING WITHOUT RISES OR DIPS ON SURFACE.
15. PRESERVE IN PLACE AND KEEP OPERATIONAL THE EXISTING ABOVE AND BELOW GROUND RECLAIMED WATER PIPE NETWORK
LOCATED OUTSIDE THE EXISTING PUMP HOUSE.
IRRIGATION LEGEND
1" QUICK COUPLER VALVE .
TORO 474-44 + 1" PVC SWING JOINT WITH BRASS NIPPLE ON TOP + 10" ROUND VALVE BOX WITH PURPLE LID.
PROVIDE FOUR (4) TORO 464-02 KEY + 477-02 1" HOSE SWIVELS + ELECTRONIC BALL UTILITY LOCATOR.
4" LATERAL LINE ISOLATION VALVE - 316 STAINLESS STEEL HARCO 8414062PN ANGLE VALVE WITH 2" SQUARE NUT + HARCO SWIVEL SERVICE TEE + PJ ADAPTOR + PJ JOINT RESTRAINT + + 19" STANDARD VALVE BOX WITH
PURPLE LID + 8" SLEEVE + ELECTRONIC BALL UTILITY LOCATOR.
AIR RELEASE VALVE INSTALL AT HIGH POINT OF MAINLINE IN JUMBO VALVE BOX. ADJUST LOCATION ON PLAN AS NEEDED. FINAL LOCATIONS TO BE DETERMINED IN THE FIELD + ELECTRONIC BALL UTILITY LOCATOR.
HDPE BUTT WELD FUSION LATERAL LINE PIPE WITH PURPLE STRIPE & RECLAIM WATER TEXT. SIZE AS SHOWN ON PLANS.
PE 4710 DR 13.5 PIPE AND DR 13.5 HDPE FITTINGS - 4" & 2" SIZE LATERAL PIPE AND FITTINGS PER PLAN.
PULL WITH VIBRATORY PLOW ALL 2" LATERAL LINES AND WIRES.
IRRIGATION DESIGN NOTES
FULL CIRCLE VALVE IN HEAD ROTOR WITH PURPLE RING ON 1.5" ACME O-RING TRIPLE SWING JOINT WITH
1.5" ACME TOP THREAD TO MATCH INLET OF HEAD. RAIN BIRD A-952-IC-80-XX SERIES
CONTROL CABLE - 12-2 SIZE FOR CABLE ALONG MAINLINE. PROVIDE PAIGE DECODER CABLE FUSE DEVICE 14-2 CONNECTIONS TO 12-2 CABLE. ALL CABLE FUSES TO BE HOUSED IN 19" RECTANGULAR VALVE BOX WITH TAN LID.
PROVIDE TORO SURGE DEVICE + #8 BARE COPPER WIRE + 8'X5/8" COPPER CLAD GROUND ROD IN VALVE BOX + GROUND PLATE FOR TORO SYSTEM ALONG THE CONTROL WIRE PATH AT EVERY 800 FEET OF CONTROL CABLE.
PROVIDE ADDITIONAL GROUNDING TO MEET 10 OHMS MAXIMUM RESISTANCE TO GROUND AS SPECIFIED BY TORO.
SURGE DEVICES ON 14-2 CABLE NOT SHOWN ON PLANS. INSTALLER TO FIELD LOCATE 14-2 SURGE DEVICES AND GROUNDING. PROVIDE ELECTRONIC BALL UTILITY LOCATOR AT EACH CABLE FUSE, SURGE DEVICE AND GROUND ROD.
PART CIRCLE VALVE IN HEAD ROTOR WITH PURPLE RING ON 1.5" ACME O-RING TRIPLE SWING JOINT WITH
1.5" ACME TOP THREAD TO MATCH INLET OF HEAD. RAIN BIRD A-952-IC-80-XX SERIES
MAINLINE ISOLATION VALVE - EPOXY COATED INSIDE AND OUTSIDE, STAINLESS STEEL STEM AND FASTENERS + 2" SQUARE NUT. FLOMATIC PUSH ON VALVE + HARCO PJ ADAPTOR + PJ ADAPTOR JOINT RESTRAINT + 19" STANDARD VALVE BOX WITH PURPLE LID + 8" SLEEVE + ELECTRONIC BALL UTILITY LOCATOR.
HDPE BUTT WELD FUSION MAIN LINE PIPE WITH PURPLE STRIPE & RECLAIM WATER TEXT. SIZE AS SHOWN ON PLANS.
PE 4710 DR 13.5 PIPE AND DR 13.5 HDPE FITTINGS - 2" AND LARGER SIZE LATERAL PIPE AND FITTINGS PER PLAN.
IRRIGATION HEADS @80 PSI REGULATION
CABLE FUSE
DEVICE
14-2 SIZE FOR CABLE ALONG SUB-MAINLINE TO INDIVIDUAL HEADS AND HEADS AROUND GREENS. PROVIDE 3M-SCOTCHLOCK RESIN WIRE CONNECTOR WIRE SPLICE MATERIAL AT ALL SPRINKLER HEAD CONNECTIONS. MAKE
ALL 3-WAY 14-2 CONNECTIONS AT A HEAD.
12/2 CABLE
GROUNDING
2" LOW POINT DRAIN VALVE + BLOCK VALVE ISOLATION VALVE - 316 STAINLESS STEEL THREADED HARCO GLOBE VALVE + 16" VALVE BOX WITH PURPLE LID + 4" SLEEVE + ELECTRONIC BALL UTILITY LOCATOR.
DUAL 20 HP RECLAIMED WATER BOOSTER PUMP STATION + AUTO FLUSH FILTER
INSTALL A NEW VFD BOOSTER PUMP STATION + FLOW SENSOR + POWDER COATED ENCLOSURE +
CONCRETE PAD. PUMP STATION TO MAINTAIN 110 PSI WATER PRESSURE TO THE IRRIGATION SYSTEM AT
A MAXIMUM 1,000 GPM FLOW RATE.
PROVIDE 10" HDPE BYPASS PIPE AND VALVES AND INSTALL PRESSURE REDUCING VALVE ON DISCHARGE SIDE OF PUMP STATION. PROVIDE 120 MICRON AUTO FLUSH FILTER WITH 2" FILTER FLUSH LINE TO LAKE.
460 VOLT THREE PHASE POWER PROVIDED BY THE PROJECT ELECTRICAL CONTRACTOR.
SEE PLANS AND DETAILS FOR COMPLETE SCOPE OF BOOSTER STATION WORK.
RENOVATE AND REPLACE EXISTING 75 HP BACK UP IRRIGATION WELL FOR EMERGENCY BACK UP WATER
SUPPLY
DEMO AND REMOVE EXISTING WELL HOUSE.
REMOVE EXISTING WELL MOTOR.
PULL TURBINE, INSPECT DISCHARGE HEAD, WELL COLUMN PIPE, SHAFT AND BOWL ASSEMBLY.
PROVIDE AIRLIFT FLOW TEST ON EXISTING WELL TO DETERMINE WELL WATER QUALITY AND FLOW RATE.
SCENARIO A WELL IS SUFFICIENT: PRESERVE IN PLACE THE EXISTING 12" IRRIGATION WELL CASING.
SCENARIO B WELL IS INSUFFICIENT: ABANDON EXISTING WELL AND DRILL NEW 12" IRRIGATION WELL.
INSTALL NEW 75HP INVERTER DUTY MOTOR ON NEW DISCHARGE HEAD.
INSTALL NEW VFD CONTROLS IN UL LISTED ENCLOSURE AND WIRE INTO NEW MOTOR.
PROVIDE NEW WELL SHAFT AND BOWL ASSEMBLY TO DELIVER 1,000 GPM AT 110 PSI.
PROVIDE NEW FLOW SENSOR AND WIRE INTO WELL CONTROLS.
WIRE WELL EQUIPMENT INTO 460 VOLT THREE PHASE POWER PROVIDED BY THE PROJECT ELECTRICAL
CONTRACTOR.
SEE WELL SPECIFICATIONS FOR COMPLETE SCOPE OF WELL WORK.
RAIN BIRD WS-POR LT WEATHER STATION. PROVIDE CONCRETE FOOTER AND INSTALL SENSOR WIRE INTO
THE FIELD INTERFACE UNIT.
RAINBIRD INTEGRATED CONTROL SYSTEM + INTEGRATED CONTROL INTERFACE (ICI) MODULE + IC CONTROL SOFTWARE MOUNTED IN GOLF MAINTENANCE FACILITY OFFICE. FOR EACH CONTROL CABLE PATH PROVIDE A CONTROLLER GROUNDING GRID - RAINBIRD MSP-1 MAXI SURGE PIPE + RAINBIRD MGP-1 MAXI GROUND PLATE + 8'X5/8" COPPER CLAD GROUND ROD WITH ACORN CLAMP + 4" X 96" X 0.125" COPPER GROUND STRIP + GROUND
ENHANCING MATERIAL WITH JUMBO VALVE BOX.
1.9
25' - 35' BLOCK ZONE ROTOR HEAD ON 3/4" PVC SWING JOINT AND LATERAL LINE PIPE.
MOUNT DOWNSTREAM OF PRESSURE REGULATING BLOCK VALVE.
12' - 15' BLOCK ZONE SPRAY HEAD AND NOZZLE ON 1/2" PVC SWING JOINT AND PVC LATERAL LINE PIPE.
MOUNT DOWNSTREAM OF PRESSURE REGULATING BLOCK VALVE.
BORE SHOT SLEEVE UNDER ROADWAY - PROVIDE HDPE SDR 11 BORE SHOTS AT LOCATION INDICATED ON
PLANS AND PER TECHNICAL DIRECTIONAL DRILLING SPECIFICATIONS.
RAIN BIRD A-952-IC-80-48 - YELLOW - SPACE 65 FEET
RAIN BIRD A-752-IC-80-28 - WHITE - SPACE 50 FEET
RAIN BIRD A-952-IC-80-56 - GREEN - SPACE 75 FEET
RAIN BIRD A-952-IC-80-48 - YELLOW - SPACE 65 FEET
RAIN BIRD A-952-IC-80-56 - GREEN - SPACE 75 FEET
PART CIRCLE FULL CIRCLE
RAIN BIRD A-952-IC-80-56 - GREEN - SPACE 75 FEET
PART CIRCLE VALVE IN HEAD ROTOR WITH PURPLE RING ON 1.25" ACME O-RING TRIPLE SWING JOINT WITH
1.25" ACME TOP THREAD TO MATCH INLET OF HEAD. RAIN BIRD A-752-IC-80-XX SERIES
1.5" PRESSURE REDUCING BLOCK CONTROL VALVE WITH PURPLE HANDLE. INSTALL VALVES IN 15" RECTANGULAR VALVE BOX WITH PURPLE LID AND ADJUST PRESSURE REDUCING VALVE TO 60 PSI LINE PRESSURE.
RAIN BIRD 150-PESB-R + ICM VALVE KIT + PRS-DIAL
BLOCK VALVE EQUIPMENT @60 PSI REGULATION
Issued for:
Sheet Number:
Date:
I R
R
IG
A T
IO
N
P L A
N S
W e k iv a C lu b C t.
L o n gw o o d F L
W E K
IV
A
G O
L F C
L U
B S e m in o le
C o u n ty
F lo ri d a
Date:
Drawn by:
Job Number:
Reviewed by:
08/16/23
150 WEST JESSUP AVENUE
LONGWOOD, FLORIDA 32750
407.667.1777
NOT FOR
CONSTRUCTION
PSI
MLP
230211
Prevost Stamper Incorporated
600 Edwards St #7102 Celebration, Florida 34747 phone (407) 566-9009 fax (407) 566-9008 www.designpsi.com
An Irrigation Design Company
LA900
IR
R
IG
A
T
IO
N L
E G
E N
D S, N O
T E S
D
E T
A
IL
S http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com
9 10
PIPE AND WIRE LINES TO BE INSTALLED IN ACCORDANCE
WITH MANUFACTURERS INSTALLATION SPECIFICATIONS
MAIN LINE + LATERAL LINE + WIRING
CONTROL CABLE
6" WIDE METALLIC
DETECTABLE
MARKING TAPE
TRENCHING DETAIL
STANDARD QUICK COUPLER VALVE GOLF VALVE IN HEAD TURF ROTOR
AIR RELEASE VALVE DETAILLOW POINT DRAIN DETAIL
MAIN LINE
12"
10" ROUND VALVE BOX
QUICK COUPLER VALVE. POSITION IN VALVE BOX
SO THAT KEY MAY BE OPERATED WITHOUT
INTERFERENCE.
1" ANGLE IRON - 24" LONG SECURED TO QUICK
COUPLER WITH 2 STAINLESS STEEL HOSE CLAMPS.
SET CLAMP IN CONCRETE BASE
WASHED GRAVEL, 8" MIN.
1" PVC TRIPLE TOP UNITIZED SWING JOINT-18"
MID SECTION LASCO OR APPROVED EQUAL.
PROVIDE 1.5" ACME INLET FOR SADDLE.
INSTALL ANGLE PER MANUFACTURERS
RECOMMENDATIONS
LATERAL LINE PIPE
MOUNT TOP OF HEAD I" ABOVE
FINISHED GRADE BEFORE SOD
LAYER.
APPROVED BACKFILL
RAIN BIRD WIRE SPLICES
VIH GOLF ROTOR PROVIDE DRIVE
PER NOZZLE PLAN
ACME SWING JOINT 1.5" X 8" X 1.5" INSTALL
ANGLE PER MANUFACTURERS
RECOMMENDATIONS
2" ELECTRO FUSION SADDLE
TEE WITH 1.5" ACME OUTLET
HDPE LATERAL LINE PIPE
2" TOE NIPPLE (LENGTH AS REQUIRED)
2" PVC PIPE (LENGTH AS REQUIRED)
90 DEGREE SXS ELL
2" TOE NIPPLE (LENGTH AS REQUIRED)
10" ROUND VALVE BOX, W/ SNAP LOCK LID
BRICKS FOR SUPPORT 4 TOTAL
6" DRAIN PIPE SLEEVE LENGTH AS REQUIRED
NIBCO T-113K W/ NUT HANDLE PARALLEL
WITH FINISHED GRADE TO ALLOW FOR
OPERATION OF GATE VALVE WITH KEY
2" PVC TO DISCHARGE (LENGTH AS
REQUIRED TO DISCHARGE POINT) KEEP
PIPE AT DOWNWARD ANGLE FROM VALVE
(NO SAGS)
2" PVC TOE NIPPLE
0.5" DIA. WASHED STONE, 8" DEPTH.
NOT TO SCALE NOT TO SCALE
NOT TO SCALE
NOT TO SCALE
NOT TO SCALE
JUMBO LOCKABLE
VALVE BOX
BRICK SUPPORT DO NOT
REST ON PIPE
2" ELBOW
BRICK SUPPORT
2" BRONZE WYE STRAINER
W/ HOSE BIB
BRICK SUPPORT
CRISPIN C20 2" DUAL AIR RELEASE VALVE OR EQUAL
90 DEGREE ELBOW
NIPPLE - LENGTH AS REQUIRED
4" SLEEVE EXTENSION - LENGTH AS REQUIRED
90 DEGREE FTBE ELBOW (BOTH SIDES OF VALVE)
MTBE NIPPLE
36"
4 GREENS HEADS & QCV DIAGRAM
NOT TO SCALE
GREEN
PROFILE
EDGE
GREEN POINT SADDLE TEES
AWAY FROM GREEN
QUICK COUPLER VALVE
PC SURROUND HEAD
FC GREEN HEAD
SWING JOINT
SUBMAINLINE
NOT TO SCALE
BLOCK VALVE + PRESS REDUCING VALVE
19" RECTANGULAR PLASTIC
VALVE BOX WITH LAVENDER LID
PLUG OUTLET OF ICV FOR FUTURE CONNECTION
4" MAX
SET VALVE BOX TOP 1" ABOVE FINISHED GRADE
PRIOR TO MULCH OR SOD INSTALLATION
SCOTCHLOC SPLICE MATERIAL
LSM DECODER
SET TOP OF FLOW STEM MAX.
4" BELOW VALVE BOX TOP
LINE BOTTOM OF VALVE BOX
WITH 6" OF RIVER ROCK GRAVEL
TURN OUTLET ON MAINLINE TEE HORIZONTAL
1.5" O-RING SWING JOINT ACME ON BOTTOM NPT ON TOP
1.5" WATTS 223 PRESSURE REDUCING VALVE
SET AT 60 PSI
AT LAST HEAD OF AN END RUN
FLUSH LATERAL LINE PIPE AND
BUTT WELD A HDPE ELBOW
2 MAINLINE ISOLATION VALVE
NOT TO SCALE
8" DIA. DRAIN PIPE EXTENSION
(LENGTH AS REQUIRED.) AROUND
OPERATING NUT.
19" STANDARD VALVE
BOX WITH PURPLE LID
CAST IRON GASKET JOINT GATE VALVE +
HARCO PJ ADAPTOR + PJ JOINT
RESTRAINT
SET TOP OF BOX AT
FINISHED GRADE
"RIGHT ON, LEFT OFF"
1 3 LATERAL LINE ANGEL ISOLATION VALVE
NOT TO SCALE
8" DIA. DRAIN PIPE EXTENSION
(LENGTH AS REQUIRED.) AROUND
OPERATING NUT.
19" STANDARD VALVE
BOX WITH PURPLE LID
HARCO STAINLESS STEEL LATERAL GATE
VALVE WITH WITH HDPE CONNECTION ON
OUTLET SIDE.
SET TOP OF BOX AT
FINISHED GRADE
TWO WIRE CONTROL CABLE WITH
COLOR CODED JACKET
#10 BARE COPPER
SHIELDING WIRE
DURA 2" SADDLE TEE WITH 1" ACME
OUTLET. TORQUE SCREW PER
MANUFACTURERS RECOMMENDATION
HARCO 2.5" PVC GASKET JOINT TEE
WITH 1.5" ACME OUTLET FOR PVC
SYSTEM LATERAL LINES.
WIRE PULL / SPLICE BOX
19" STANDARD VALVE BOX
DBYR SPLICE KITS FOR CONTROL WIRE
SPLICES IN SPLICE BOXES.
8" DEPTH OF 3/4" WASHED GRAVEL
STANDARD BRICK FOR SUPPORT (4 TOTAL)
8" M
AX
LATERAL LINE
HARCO DUCTILE IRON GASKET JOINT X
SWIVEL SERVICE TEE + HARCO PJ
ADAPTOR + PJ JOINT RESTRAINT
2" ELECTRO FUSION SADDLE
TEE WITH 1.5" ACME OUTLET
CABLE SURGE DEVICE + GROUNDING
NOT TO SCALE
#6 AWG SOLID
BARE COPPER
WIRE
12'
S
TOP VIEW
SIDE VIEW
SB
1" BRONZE WYE STRAINER
+ HOSE BIB
2" ELECTRO FUSION SADDLE TEE WITH 2" THREAD
OUTLET
50MM 316 STAINLESS STEEL GATE VALVE
ELECTRONIC BALL UTILITY MARKER
ELECTRONIC BALL UTILITY MARKER
ELECTRONIC BALL UTILITY MARKER
ELECTRONIC BALL UTILITY MARKER
ELECTRONIC BALL
UTILITY MARKER
ELECTRONIC BALL UTILITY MARKER
ELECTRONIC BALL UTILITY MARKER
Issued for:
Sheet Number:
Date:
I R
R
IG
A T
IO
N
P L A
N S
W e k iv a C lu b C t.
L o n gw o o d F L
W E K
IV
A
G O
L F C
L U
B S e m in o le
C o u n ty
F lo ri d a
Date:
Drawn by:
Job Number:
Reviewed by:
08/16/23
150 WEST JESSUP AVENUE
LONGWOOD, FLORIDA 32750
407.667.1777
NOT FOR
CONSTRUCTION
PSI
MLP
230211
Prevost Stamper Incorporated
600 Edwards St #7102 Celebration, Florida 34747 phone (407) 566-9009 fax (407) 566-9008 www.designpsi.com
An Irrigation Design Company
LA901
IR
R
IG
A
T
IO
N L
E G
E N
D S, N O
T E S
D
E T
A
IL
S http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com
PUMP STATION
DISCHARGE DETAIL
- PLAN VIEW
PROVIDE A NEW 10" RECLAIMED
WATER HDPE WATER SUPPLY LINE
FROM THE EXISTING RECLAIMED
WATER BACKFLOW PREVENTER TO
THE NEW PUMP STATION.
BUT WELD FUSE THE PUMP
DISCHARGE PIPE TO THE HDPE
IRRIGATION MAINLINE.
PUMP STATION
DISCHARGE DETAIL
- ELEVATION VIEW
LEGEND
1. Irrigation Control INTERFACE BOX
2. 460V 3 Ph Fusible Safety w/ 120V Transformer
3. 30 HP VFD - Lead/Lag Capable with DriveWatch
4. 30 HP End Suction Cent. Pump w/ TEFC Motor
5. Dual Bladder Tanks - Amtrol 250 PSI WP
6. Orival ORZ-08-PE Filtration w/ GTFC151
7. Octave Ultrasonic Water Meter 36OCT08GAL0.1
8. 8" Grooved Galv. Steel Manifold with Iso. Valves
9. 6" Grooved Cla-Val 136-01-4419K w/ 24 VAC Coil
10. Marine Grade Aluminum Skid w/ Hat Batten
PLAN VIEW PROJECTED ISO VIEW
1 2
1 2
LEFT SIDE VIEW FRONT ELEVATION VIEW RIGHT SIDE VIEW
Wekiva Golf Course
NOTES:
THIS IS A CONCEPTUAL DESIGN THAT MAY BE SUBJECT TO MINOR CHANGES DUE TO EQUIPMENT DIMENSIONS.
EQUIPMENT SETBACKS SHOULD BE IN COMPLIANCE BY NEC, LOCAL AND STATE ELECTRICAL CODES.
MODEL
PROJECT
RECLAIM WATER Booster Pump Station with Filtration
PIB-30-C-463-D/F6-800H/ALC-3-460/MV
CUSTOMER APPROVAL SIGNATURE DATE
MOTOR
DETAILED FRONT ELEVATION
30 HP (x2)
SUCTION SIZE
DISCHARGE SIZE 8" Gr. Gal.
8" Gr. Gal.
DO NOT SCALE
POWER
FILTRATION DEGREE
MISC
463V 3 Ph
120 Micron
DRAWN BY:
APPROVED BY:
For: Prevost Stamper Inc.
JAS
BT
Issued for:
Sheet Number:
Date:
I R
R
IG
A T
IO
N
P L A
N S
W e k iv a C lu b C t.
L o n gw o o d F L
W E K
IV
A
G O
L F C
L U
B S e m in o le
C o u n ty
F lo ri d a
Date:
Drawn by:
Job Number:
Reviewed by:
08/16/23
150 WEST JESSUP AVENUE
LONGWOOD, FLORIDA 32750
407.667.1777
NOT FOR
CONSTRUCTION
PSI
MLP
230211
Prevost Stamper Incorporated
600 Edwards St #7102 Celebration, Florida 34747 phone (407) 566-9009 fax (407) 566-9008 www.designpsi.com
An Irrigation Design Company
LA902
IR
R
IG
A
T
IO
N P
U M
P S
T A
T
IO
N http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com http://www.designpsi.com
| Sheets and Views |
| XIRR.PLOT-LA000 |
| XIRR.PLOT-LA000.A |
| XIRR.PLOT-LA000.B |
| XIRR.PLOT-LA800.A |
| XIRR.PLOT-LA800.B |
| XIRR.PLOT-LA810.A |
| XIRR.PLOT-LA810.B |
| XIRR.PLOT-LA811.A |
| XIRR.PLOT-LA811.B |
| XIRR.PLOT-LA812.A |
| XIRR.PLOT-LA812.B |
| XIRR.PLOT-LA813.A |
| XIRR.PLOT-LA813.B |
| XIRR.PLOT-LA900 |
| XIRR.PLOT-LA901 |
| XIRR.PLOT-LA902 |
File details come from the government source that posted it. Updated .