Canton Exterior Lighting Upgrade Administration Building 2025.pdf

Charter Township of Canton

Request For Proposal for

Exterior Lighting Upgrade – Administration Building

Contact: Tom Gaffka E-mail: tom.gaffka@cantonmi.gov

Telephone: (734) 394-5314

Date Issued: 8/21/2025

Due Date & Time: 3:00 p.m., Thursday, September 4, 2025 mailto:tom.gaffka@cantonmi.gov

The deadline established for the receipt of your sealed proposal is 9/4/2025 at 3:00 p.m. The proposal is to be submitted online on the bidnetdirect.com / MITN Purchasing Group web portal.

SECTION # 1 GENERAL REQUIREMENTS & INSTRUCTIONS

1. SUBMISSION OF OFFERS: All offers should be submitted online in the bidnetdirect.com / MITN Purchasing Group web portal. Any submittal received in the Clerk’s Office will not be considered. No offer may be modified after acceptance. No offer may be withdrawn after opening for a period of sixty days unless otherwise specified. The proposal must include all costs.

2. EXECUTION OF OFFER: Offer shall contain a manual signature in the space(s) provided of a representative authorized to legally bind the offeror to the provisions therein.

3. EXECUTION OF ACCEPTANCE: Canton Township legally recognizes acceptance of formal offer when a written contract is signed by both parties. Offerer is not to assume that the Canton Board of Trustees resolution approving the bid or proposal is a binding contract.

4. OPENING & RECORDING: Opening shall be public in the Clerk’s Office immediately following the advertised deadline date and time for receipt of submittals.

5. INTEGRITY: Canton Township does not discriminate on the basis of race, color, national origin, sex, religion, age or disability in employment or the provision of services.

6. TABULATION: Bid results will be posted on the MITN website at https://www.bidnetdirect.com/mitn/solicitations/open-bids/page1

7. BOARD AWARDS: As the best interest of Canton may require, Canton reserves the right to make award(s) by an individual item, group of items, all or none, or a combination thereof; on a geographical basis and/or on a countrywide basis with one or more supplier(s) or provider(s); to reject any and all offers or waive any irregularity or technicality in offers received. Offerors are cautioned to make no assumptions. Any or all awards made as a result of this invitation shall conform to applicable ordinances and policies of Canton Township. Bid awards will be posted on the Township’s website at www.cantonmi.gov

8. BRAND NAME OR EQUAL: If items requested by this invitation have been identified in the specifications by a brand name “OR EQUAL” description, such identification is intended to be descriptive and not restrictive and is to indicate the quality and characteristics of products that will be acceptable. Offers proposing “equal” products will be considered for award if such products are clearly identified in the offer and are determined by Canton to meet fully the salient characteristic requirements listed in the specifications.

https://www.bidnetdirect.com/mitn/solicitations/open-bids/page1 http://www.cantonmi./

9. PRICING: Unless otherwise specified prices offered shall remain firm for a period of at least sixty (60) days; all pricing of goods shall include FOB Canton Township, all packing, handling, shipping charges and delivery to any point(s) within Canton to a secure area or inside delivery.

10. PAYMENT TERMS: Canton Township will remit full payment on all undisputed invoices within thirty (30) days from receipt by the appropriate person(s) of the invoice or receipt of all products or services ordered.

11. INCURRED EXPENSE: This invitation does not commit Canton to make an award nor shall Canton be responsible for any cost or expense which may be incurred by any respondent in preparing and submitting a reply, or any cost or expense incurred by any respondent prior to the execution of a purchase order or contract agreement.

12. QUESTIONS/ ADDENDA: Any questions concerning the conditions or specifications shall be directed to the designated contact person. Addenda items will be posted on the township website, on the Purchasing Division page under Requests for Bids, Proposals and Qualifications. It is the bidder’s responsibility to check and verify that addenda have been issued. Failure to acknowledge addenda may result in the offer not being considered.

13. CLARIFICATION/CORRECTION OF ENTRY: Canton reserves the right to allow for the clarification of questionable entries and the correction of OBVIOUS MISTAKES.

14. INSURANCE: The successful bidder is required to furnish evidence of the following insurance requirements in accordance with Canton’s Risk Management Policy O:02.

Work may not commence until the Certificates of Insurance have been received. The coverage requirements are as follows:

Workers’ Compensation Insurance: The Contractor shall procure and maintain during the life of this contract, Workers’ Compensation Insurance, including Employers’ Liability Coverage, in accordance with all applicable statutes of the State of Michigan.

Commercial General Liability Insurance: The Contractor shall procure and maintain during the life of this contract, Commercial General Liability Insurance on an “Occurrence Basis” with limits of liability not less than $ 1,000,000 per occurrence and aggregate combined single limit, Personal Injury, Bodily Injury, and Property Damage. Coverage shall include the following extensions:(A) Contractual Liability; (B) Products and Completed Operations; (C) Independent Contractors Coverage; (D) Broad Form General Liability Extensions or equivalent.

Motor Vehicle Liability: The Contractor, or its subcontractors, shall procure and maintain during the life of this contract Motor Vehicle Liability Insurance, including Michigan No-Fault Coverage, with limits of liability not less than $ 1,000,000 per occurrence combined single limit, Bodily Injury, and Property Damage. Coverage shall include all owned vehicles, all non-owned vehicles, and all hired vehicles.

Additional Insured: Commercial General Liability Insurance as described above, shall include an endorsement stating that the following shall be Additional Insured: The Charter Township of Canton, all elected and appointed officials, all employees and volunteers, all boards, commissions, and/or authorities and board members, including employees and volunteers thereof.

Cancellation Notice: The Insurance coverage described above, shall include an endorsement stating the following: “It is understood and agreed that Thirty (30) days Advance Written Notice of Cancellation, Non-Renewal, Reduction, and/or Material Change shall be sent to: Jeanette Aiello, 1150 Canton Center S., Canton MI, 48188.

Indemnification: To the fullest extent permitted by law, the (name of contractor) agrees to defend, pay on behalf of, indemnify, and hold harmless the Charter Township of Canton, its elected and appointed officials, employees and volunteers, and others working on behalf of the Charter Township of Canton against any and all claims, demands, suits, or loss, including all costs connected therewith, and for any damages which may be asserted, claimed, or recovered against or from the Charter Township of by reason of personal injury, including bodily injury or death and/or property damage, including loss of use thereof, which arises out of or is in any way connected or associated with this agreement.

15. PUBLIC ACT 517 OF 2012: In accordance with Public Act 517 of the Public Acts of 2012, any Iran linked business is not eligible to submit a bid on a request for proposal with a public entity in Michigan. An “Iran linked business” includes the following:

(1) A person engaging in investment activities in the energy sector of Iran, including a person that provides oil or liquefied natural gas tanker or products used to construct or maintain pipelines used to transport oil or liquefied gas for the energy section of Iran; and

(2) A financial institution that extends credit to another person, if that person will use the credit to engage in investment activities in the energy sector of Iran.

For purposes of this prohibition, “person” includes an individual, corporation, company, limited liability company, business association, partnership, society, trust, or any other non-governmental entity, organization or group. It also includes a governmental entity or instrumentality of a governmental entity, or any successor, subunit, parent company or subsidiary of, or company under common ownership or control with and of the foregoing.

REQUEST FOR PROPOSAL

Administration Building Exterior lighting Upgrade

1150 Canton Center, Canton, Michigan 48188

INTRODUCTION

The Township has chosen to issue this Request for Proposal (RFP) to seek a company(s) to provide upgraded exterior lighting at the Administration building

The original construction of the building was completed in 1978, with the most recent addition in 2002. Current exterior lighting was upgraded to LED in 2012.

Refer to Attachment A - Administration site plan

SITE VISITS AND QUESTIONS

Any questions regarding the material contained in the RFP, please e-mail Tom Gaffka at Tom.Gaffka@Cantonmi.gov

Amendments will be issued for clarification on the Township website should the Township deem it necessary to do so.

SCOPE OF WORK

The selected contractor shall remove all existing ground-mounted LED floodlight fixtures currently illuminating the City Hall facade and replace them with new DMX/RDM-compatible RGBW LED floodlights. Bidders must determine how many fixtures to add, remove, or replace. All existing concrete pads and stub-mounted hardware shall be reused if structurally sound. If not, contractor must replace in kind. All fixtures must be integrated with a Pharos lighting control system and Pathway DMX repeater. The touchscreen control panel (TPS 5 or TPS 8) and controller (LPC1 or LPC2) shall be installed inside City Hall. The contractor shall provide all labor, equipment, cabling, programming, commissioning, and staff training necessary for a fully operational and intuitive system.

• All removed materials shall be removed from the site for proper disposal.

• Any manufacturer's recommendations for site preparations shall be completed prior to installation. A description of the means and methods shall be provided in the contractor’s proposal.

A warranty description shall be provided:

• The selection of the contractor shall include an evaluation of the proposed installation and product warrantees provided in response to this RFP.

PROPOSAL BREAKDOWN:

• The proposal should provide individual costs for Labor and Materials

SPECIFIED PRODUCT(s)

Fixture: Hydrel SAF14 RGBW, 94W max, knuckle-mount, IP68, DMX/RDM-compatible. Control: Pharos Lighting Control Kit (TPS 5 or TPS 8, LPC 1 or 2, PoE switch). Repeater: Pathway PWREP IP65 P4 TERM RDM or equal. All components must be compliant with BAA/BABA regulations and warrantied for at least 5 years.

Alternate Product Criteria Bidders proposing alternate products must meet or exceed the following minimums: - RGBW output, 3000+ lumens at 100W - Full DMX/RDM compatibility - Rated for outdoor, ground-mounted installation (IP66+)

- 5-year manufacturer warranty minimum - Buy America(n) / Build America compliant - Comparable beam distribution and aiming capability - Must include white-light photometric layout

SCHEDULE:

Mandatory Site Visit will be at 1150 Canton Center on Aug 26th, 2025 at 10 am

Contractor to provide recommended construction schedule as part of proposal.

QUALIFICATIONS:

Experience Requirements:

It's very important that the Contractor's team performing the work on the Township property have a significant amount of experience working on similar projects. The Contractor must be able to provide proof of experience with successful installations at a minimum of 3 like systems.

BID REQUIREMENTS

Each bid must include:

• Total turnkey pricing

• Photometric layout showing white light performance

• Training plan for City Hall staff

• Product data and warranty terms

• Estimated schedule for project completion

• Minimum of three similar references

EVALUATION CRITERIA

All proposals shall be evaluated by a committee comprised of appropriate Canton Township personnel using a standard evaluation scoring as follows:

Criteria Maximum Score

Contractors' cost proposal and warrantee description: 30

Proposers' means and methods to perform work: 20

Integration and installation strategy: 20

References & Performance, experience with lighting systems: 20

Quality of Contractor's proposal and interview (if selected): 10 Total maximum score: 100

Charter Township of Canton

REQUEST FOR PROPOSAL

Administration Building Exterior lighting Upgrade

1150 Canton Center, Canton, Michigan 48188

COMPANY NAME

ADDRESS

TELEPHONE

FAX

E-MAIL

DATE

PROPOSER ' S NAME

(Please print or type)

SIGNATURE

Labor cost

Material cost

Total

Alternate Material Cost

CONTRACTOR INFORMATION SHEETS

(These sheets must be completed and included with proposal)

COMPANY NAME: ________________________________________

ADDRESS: ______________________________________________

PHONE #______________________

ESTABLISHED: _____________________ ___________

(Month) (Year)

TYPE OF ORGANIZATION: (Circle One)

A) Individual B) Partnership C) Corporation D) Joint Venture E) Other __________________________________ (Specify)

(If Applicable)

FORMER FIRM NAMES(S) YEARS IN BUSINESS

YEARS OF WORK IN A RELATED FIELD:

(Described Any Related Work)

USE OF SUBCONTRACTORS:

To provide all services listed in the specifications, would any services be handled by subcontractors? ______ Yes/No If “Yes”, please explain:

Subcontractor Name(s): ____________________________________________

PROJECT MANAGER:

Would your company be able to provide a single project manager for this work? ___ Yes/No

Name: __________________________ Credentials: (Please List)

Title: ____________________________ _________________________________

REFERENCES: List (3) clients who have had work meeting (or similar to) the Specifications:

COMPANY ADDRESS CONTACT PHONE

1) ____________________________________________________________

2) _____________________________________________________________

3) _____________________________________________________________

EQUIPMENT: List equipment, owned by the company to be used while completing the job:

THE FOREGOING IS A TRUE STATEMENT OF FACTS:

I/we hereby certify under penalty of law that we are not an Iran linked business as defined in PA 517 of 2012.

Signature of Authorized Company Representative: __________________________

Company _________________________________

Address _________________________________

Date _________________________________

Phone # _________________________________

E-Mail Address _________________________________

Representative’s Name _________________________________ (Please Print)

CATALOG

NUMBER

NOTES

TYPE

© 2021-2024 Acuity Brands Lighting, Inc. • One Lithonia Way, Conyers GA 30012 Phone: 800-705-SERV (7378) • www.hydrel.com

SAF14_RGBW | Rev. 07/31/24

SAF14 RGBW

SPECIALTY

ARCHITECTURAL FLOOD

MVOLT LED

TM

HIGHLIGHTS

• Suitable for a variety of mounting applications including ground, wall, pole, stanchion

rugged knuckle and yoke design

transitions

optical chamber and driver

• Quad chip technology, enabling optimal color mixing under each individual optic. Avoid striations and color separation when wall grazing/washing

• NOM Listed

LUMEN PACKAGES

10DEG 15DEG 20DEG 30DEG 40DEG 50DEG 70DEG

Deliverd Lumens 3,120 2,977 2,957 2,917 2,870 2,850 2,762 Watts 94 94 94 94 94 94 94

LPW 33 32 31 31 31 30 29

Max Candela 78,518 24,496 18,153 7,358 4,276 3,098 1,885

100DEG 15Vx60H 30Vx60H 60Vx15H 60Vx30H Deliverd Lumens 2076 3,044 2,939 2,849 2,808 Watts 94 94 94 94 94

LPW 22 32 31 30 30

Max Candela 913 7,617 4,199 7,897 3,993

Note: Information based on RGBW4 @P1

AIMING DETAIL

Specifications

Weight: 34lbs

EPA: KM: 1.24

YM: 1.21

Individual Channel Lumens R G B W Scaling factor 0.44 0.60 0.15 0.67

Note: Information based on RGBW4 @ Channel output maximum

DIMENSIONS

KNUCKLE

YOKE

STANDARD DISTRIBUTION

10DEG 15DEG 20DEG 30DEG 40DEG 50DEG

70DEG 100DEG 15Vx60H 30Vx60H 60Vx15H 60Vx30H http://www.hydrel.com

® SAF14 RGBW | 2

SAF14_RGBW | Rev. 07/31/24

© 2021-2024 Acuity Brands Lighting, Inc. • One Lithonia Way, Conyers GA 30012 Phone: 800-705-SERV (7378) • www.hydrel.com

ORDERING INFORMATION EXAMPLE: SAF14 LED P1 RGBW3 MVOLT 10DEG CWL KM CJB L1 DMX BL

SAF14

Series* Source* Performance Packages* LED Dynamic Range* Voltage* Distribution* Lens* Mounting*

SAF14 Specialty Architectural Flood

LED P1 RGBW3 30K white (80CRI)

RGBW4 40K white (80CRI)

MVOLT 10DEG 10°

15DEG 15°

20DEG 20°

30DEG 30°

40DEG 40°

50DEG 50°

70DEG 70°

100DEG 100°

15VX60H 15° x 60°

30VX60H 30° x 60°

60VX15H 60° x 15°

60VX30H 60° x 30°

CWL Clear Watershed Lens

Note: CWL lens IK08.

For IK10 use external WRG option.

KM Knuckle

YM Yoke

Mounting Accessories Options Internal Accessory Options Control Input* External Finish*

ADPMR Architectural Decorative Pole Mount Round

ADPMS Architectural Decorative Pole Mount Square

AMPC_/_ Architectural Mid Pole Clamp available to fit on a 4" or 6" pole with 1 or 2 fixtures

APAR Round 18" Pole Mount

APAS Square 18" Pole Mount

AWSC Architectutal Wall Splice Cover

CAJB Cylindrical Architectural Junction box

CJB Cylindrical Junction Box

CPM Cylindrical Pedestal Mount

CPMSA Cylindrical Pole Mount Splice Access

CSM_ Cylindrical Stancion Mount 12"-48" available in 6" increments

CWMA_T Cylindrical Wall Mount Arm Top 12"-48" (available in 6" increments)

L1 Prismatic Lens

L2 Linear Spread Lens

L3 Softening Lens

IHL Honeycomb Louver

Note: Only one Internal accessory can be choosen

Hardware

TPH Tamper proof hardware

LASC Safety Cable

CSL_ 10' – 50'

of cord available in 5' increments

Note: Cord length required for Yoke Mounting only

DMX GS Glare shield

FGS Full Glare Shield

WRG Wire Rock Guard

BL Black Textured

BRS Bronze Smooth

BRT Bronze Textured

CF Custom Finish

DBL Black Smooth

DDB Designer Bronze

DNA Natural Aluminum

NBS Natural Bronze Smooth

VET Verde Textured

WH White Textured

WHS White Smooth

__Z Zinc Undercoat (i.e.BLZ) Note: Zinc Undercoat provides corrosion protection for Marine Environment and Natatorium Construction

CF Custom Finish

RALTBD RAL Paint Finishes

Note: RALTBD for pricing only, replace with applicable RAL call out when ready to order. See the RALBROCHURE for available options. It is recommended that Hydrel products only use textured paint.

*Required Fields https://hydrel.acuitybrands.com/resources/paint-finishes

® SAF14 RGBW | 3

© 2021-2024 Acuity Brands Lighting, Inc. • One Lithonia Way, Conyers GA 30012 Phone: 800-705-SERV (7378) • www.hydrel.com

PERFORMANCE DATA

Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Actual performance may differ as a result of end-user environment and application. Contact factory for performance data on any configurations not shown here.

LUMEN OUTPUT — SAF14_RGBW

Performance Package System Watts Distribution Type

Field Angle Beam Angle RGBW3 RGBW4

°H °V °H °V Max CD Lumens LPW Max CD Lumens LPW

P1 94

10DEG 18 18 9 9 76,045 3,021 32 78,518 3,120 33

15DEG 32 32 16 16 25,661 2,883 31 26,496 2,977 32

20DEG 39 39 20 20 17,581 2,864 30 18,153 2,957 31

30DEG 61 61 33 33 7,126 2,825 30 7,358 2,917 31

40DEG 78 78 47 47 4,142 2,780 30 4,276 2,870 31

50DEG 90 90 56 56 3,001 2,760 29 3,098 2,850 30

70DEG 111 111 77 77 1,826 2,675 28 1,885 2,762 29

100DEG 131 131 100 100 884 2011 21 913 2076 22

15Vx60H 95 34 66 16 7,377 2,948 31 7,617 3,044 32

30Vx60H 98 61 66 33 4,067 2,846 30 4,199 2,939 31

60Vx15H 33 93 16 65 7,648 2,759 29 7,897 2,849 30

60Vx30H 62 100 34 68 3,868 2,719 29 3,993 2,808 30

To see complete photometric reports or download .ies files for this product, visit www.hydrel.com

PHOTOMETRIC DIAGRAMS

Current (A)

Light Engines Drive Current (mA) System Watts 120 208 240 277

RGBW P1 10+deg 500 94 0.78 0.45 0.39 0.34

ELECTRICAL LOAD

Ambient Ambient RGBW Lumen Multiplier

0°C 32°F 1.28 10°C 50°F 1.18 20°C 68°F 1.06 25°C 77°F 1.00 30°C 86°F 0.95 40°C 104°F 0.83

Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F).

LUMEN AMBIENT TEMPERATURE (LAT) MULTIPLIERS

RGBW GAMUT AND RANGE

• The Gamut of a luminaire determines the potential color range, specifically the dominant wavelength of each primary color.

• The Path determines the range of colors the user can select for the luminaire.

ARCHITAINMENT COLOR GPHD

The RGBW Range reaches the full range of saturated colors and subtle pastels to create bold transformational effects.

RGBW Range within triangle formed by RGB

AA

A

CSA LISTING TEMPERATURE: -20°C though 35°C

Optical Scaling Charts*

Symmetric Distributions (10DEG - 70DEG)

GS 0.96

FGS 0.95

IHL 0.76

L1 0.95 L2 0.95 L3 0.97

WRG 0.81

*Wider distributions will have a lower scaling factor - see individual IES files for full details

Asymmetric Distributions (xxVXxxH)

GS 0.93*

FGS 0.85*

IHL 0.35

L1 0.88 L2 0.86 L3 0.95

WRG 0.71

Note: This table can be used to approximate the lumen values with different accessories.

Please see IES files for exact lumen outputs.

https://hydrel.acuitybrands.com/

® SAF14 RGBW | 4

© 2021-2024 Acuity Brands Lighting, Inc. • One Lithonia Way, Conyers GA 30012 Phone: 800-705-SERV (7378) • www.hydrel.com

SAF MOUNTING ACCESSORIES

Part #

ADPMR/ADPMS Architectural Decorative Pole Mount Round or Square

• Architectural opulent design for seamless pole integration and fixture aiming

• Intended for 4" round and tapered poles or minimum 4" square poles

• Mounting location on the top of each arm accepts one lighting fixture

• Designed for SAF7 & SAF14 fixtures

Examples:

ADPMR 78C BL

See spec sheet for more options

aiming

option

Example:

AMPC4/1 78C BL

See spec sheet for more options

APAR/APAS Architectural Pole Arm Round or Square

• Intended for 4” round and tapered poles or minimum 4" square poles

• Mounting location on the top of each arm accepts one lighting fixture

• Designed for SAF7 & SAF14 fixtures

Example:

APAS XLSC BRS

See spec sheet for more options

AWSC Architectural Wall Splice Cover

• Designed to be mounted over a recessed wall box or can be surface mounted for direct conduit entrance

• Supplied with an integral splice access compartment for easy fixture connections

• Designed for SAF7 & SAF14 fixtures

Example:

AWSC 78C DNA

See spec sheet for more options

CAJB Cylindrical Architectural Junction Box

Example:

CAJB 34B XLSC DBL

See spec sheet for more options

CJB Cylindrical Junction Box

Example:

CJB 34S XLSC VET

See spec sheet for more options http://www.hydrel.com https://hydrel.acuitybrands.com/products/detail/1310876/hydrel/angled-pole-arms-adpm/mounting-accessory-for-use-with-saf-series-floods https://hydrel.acuitybrands.com/products/detail/1602842/hydrel/architectural-mid-pole-clamp/mid-pole-mounting-accessory-for-saf7-or-saf14-floodlights https://hydrel.acuitybrands.com/products/detail/1310879/hydrel/pole-mount-arm-apa/mounting-accessory-for-use-with-saf-series-floods https://hydrel.acuitybrands.com/products/detail/1310886/hydrel/wall-cover-awsc/mounting-accessory-for-use-with-saf-series-floods https://hydrel.acuitybrands.com/products/detail/1310889/hydrel/cylindrical-architectural-junction-box-cajb/mounting-accessory-for-use-with-saf-series-floods https://hydrel.acuitybrands.com/products/detail/1310891/hydrel/cylindrical-junction-box-cjb/mounting-accessory-for-use-with-saf-series-floods

® SAF14 RGBW | 5

© 2021-2024 Acuity Brands Lighting, Inc. • One Lithonia Way, Conyers GA 30012 Phone: 800-705-SERV (7378) • www.hydrel.com

SAF MOUNTING ACCESSORIES

Part #

CPM Cylindrical Pedestal Mount

Example:

CPM 78C BL

See spec sheet for more options

CPMSA Cylindrical Pole Mount Splice Access

Example:

CPMSA 78C DBL

See spec sheet for more options

CSM Cylindrical Stanchion Mount

Example:

CSM12 XLSC BRT

See spec sheet for more options

CWMA E/CWMA T Cylindrical Wall Mount Arm End or Top

Example:

CWMA30T 78C BL

CWMA12T XLSC BRS

See spec sheet for more options http://www.hydrel.com https://hydrel.acuitybrands.com/products/detail/1310893/hydrel/cylindrical-pedestal-mount-cpm/mounting-accessory-for-use-with-saf-series-floods https://hydrel.acuitybrands.com/products/detail/1310895/hydrel/cylindrical-tenon-pole-mount-cpmsa/mounting-accessory-for-use-with-saf-series-floods https://hydrel.acuitybrands.com/products/detail/1310897/hydrel/cylindrical-stanchion-mount-csm/mounting-accessory-for-use-with-saf-series-floods https://hydrel.acuitybrands.com/products/detail/1310907/hydrel/cylindrical-wall-mount-arm-cwma/mounting-accessory-for-use-with-saf-series-floods

® SAF14 RGBW | 6

© 2021-2024 Acuity Brands Lighting, Inc. • One Lithonia Way, Conyers GA 30012 Phone: 800-705-SERV (7378) • www.hydrel.com

EXTERNAL ACCESSORIES

Part #

• WRG- Wire Rock Guard Example:

WRGSAF14 BL

• FGS- Full Glare Shield Example:

FGSSAF14 DDB

• GS- Glare Shield Example:

GSSAF14 BL

Ø 12.75

Ø 12.75

Ø 12.75

6.37 5.00

6.37 5.00

2.77 1.40

Ø 12.75

Ø 12.75

Ø 12.75

6.37 5.00

6.37 5.00

2.77 1.40

Ø 12.75

Ø 12.75

Ø 12.75

6.37 5.00

6.37 5.00

2.77 1.40

® SAF14 RGBW | 7

© 2021-2024 Acuity Brands Lighting, Inc. • One Lithonia Way, Conyers GA 30012 Phone: 800-705-SERV (7378) • www.hydrel.com

ACCESSORY OPTIONS

FRESCO CONTROL SYSTEM

Refer to FRESCO spec sheet for additional details and options.

Series Model Options Finish

FCS Fresco Control System 7TSN 7" touchscreen with nLight port

X DMX/RDM control DBL Black

DWH White

DNA Natural Aluminum

EASYL - LED SHOW CONTROLLER WITH LCD TOUCHSCREEN

Series Voltage Finish

EZSOLO Easyl Solo

EZTOUCH Easyl Touch

EZPRO Easyl Pro

MVOLT 120V-277V VAC,

50/60Hz

BK Black

Wh White

Refer to EASYL spec sheet for additional details and options.

TAKE CONTROL

Hydrel lighting solutions bring ease of use, innovation, and next-generation control features to commercial, underwater, and architec-tural outdoor applications. We offer a dedicated team of specification engineers to take you through lighting design, the specification process, to the installation of our fixtures. We simplify the complex and help you create the right layer of light for any outdoor lighting environment. Find the right architectural outdoor fixture, controls, and network connectivity with Hydrel Lighting Solutions.

Refer to PWREP IP65 spec sheet for additional details.

DMX-RDM Repeater with Power in IP65 Enclosure

Model

PWREP IP65 P4 TERM RDM DMX-RDM Repeater with Power in IP65 Enclosure

PATHWAY CONNECTIVITY SOLUTIONS - DMX NETWORKING AND ADVANCED CONTROL

DMX512 networks create dynamic lighting. Dynamic lighting often brings a lot of color and movement to spaces. The DMX512 lighting protocol was created to serve the needs of performance lighting, such as in theaters or music venues. A DMX network is designed to support large amounts of data continually moving between controllers and luminaires, and at very high speeds. Many non-performance lighting applications also rely on DMX networks, to support RGB LED luminaires featured in applications such as building façades, hotel lobbies and corporate reception areas.

A DMX network always includes a controller and luminaires that are compatible with the DMX protocol. As well, DMX lighting systems must include network devices that route the DMX data to different locations between the controllers and luminaires.

Pathway Connectivity provides these network devices, creating robust and secure network backbones.

Pathway devices create bridges between Ethernet and DMX, and DMX and other kinds of lighting control protocols, such as RDM, nLight® or 0-10v.

http://www.hydrel.com https://www.acuitybrands.com/products/detail/223381/fresco/frescot-touchscreen/touchscreen-lighting-controllers#Spec_Sheets https://www.acuitybrands.com/products/detail/210270/fresco/easylt/easyl-dmx512a-show-controller#Spec_Sheets https://img.acuitybrands.com/public-assets/catalog/1990922/pathway-pwrep-ip65.pdf?abl_version=12%2f04%2f2023+07%3a37%3a24&DOC_Type=SPEC_SHEET http://www.pathwayconnect.com

® SAF14 RGBW | 8

© 2021-2024 Acuity Brands Lighting, Inc. • One Lithonia Way, Conyers GA 30012 Phone: 800-705-SERV (7378) • www.hydrel.com

WIRING AND LAYOUT DESIGN

DMX Controller

DMX-RDM Repeater with Power in IP65 Enclosure sold separately to order use

PWREP IP65 P4 TERM RDM

Line Voltage

SAF

Yoke Mount

SAF

Yoke Mount

SAF

Yoke Mount

SAF Cable

SAF Cable

SAF Cable

Wiring Detail - DMX RGBW Fixture

MATERIAL: Die cast copper-free aluminum (A360) housing & doors with separate optical and driver compartments to ensure thermal isolation of the electronic drivers.

VOLTAGE: MVOLT 120V-277V 50/60Hz.

DISTRIBUTION: Available in 10DEG, 15DEG, 20DEG, 30DEG, 40DEG, 50DEG, 70DEG, 100DEG, 15Vx60H, 30Vx60H, 60Vx15H and 60Vx30H.

LENS: Molded from heat strengthened borosilicate glass for superior clarity and strength.

MOUNTING: Adjustable knuckle is 1/2” NPT. Yoke mount is a 7/8" thru hole center and (2) 7/16" thru holes 2.2" on center. Aluminum knuckle, yoke, & stainless steel locking hardware with infinite aiming adjustment capabilities and a wide array of mounting accessories. Yoke mount luminaires are provided with 10'-50' at 5ft increments of 18 gauge/6 conductor ST cord for power supply and control.

Knuckle mount luminaires are provided with 18" leads (18 gauge for power supply and 22 gauge for control).

GLARE CONTROL: External glare control options include full glare shields and half glare shields.

FINISH: Exterior parts are protected by a zinc-infused durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climates without cracking or peeling.

ELECTRICAL: MVOLT (120-277) LED Class 2 power supply. 94 watts, L83 lifetime ≥ 100,000 hours at 25°C. Power factor > 90%, THD < 20%. 6KV surge protection meets a minimum Category C low operation per ANSI/IEEE C62.41.2.

FEATURES: Taper lock knuckle and yoke for infinite aiming and an unparalleled locking ability.

EXTERNAL ACCESSORY: Impact resistant rock guard.

GOVERNMENT PROCUREMENT

BAA – Buy America(n) Act: Product qualifies as a domestic end product under the Buy American Act as implemented in the FAR and DFARS. Product also qualifies as manufactured in the United States under DOT Buy America regulations.

BABA – Build America Buy America: Product qualifies as produced in the United States under the definitions of the Build America, Buy America Act.

Please refer to www.acuitybrands.com/resources/buy-american for additional information.

LISTING: cCSAus, suitable for outdoor & wet location. IP68 rated.

WARRANTY: 5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.

com/support/warranty/terms-and-conditions

Consult factory for details

NOTE: Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Specifications subject to change without notice.

FEATURES & SPECIFICATIONS

http://www.hydrel.com https://www.acuitybrands.com/resources/buy-american http://www.acuitybrands.com/support/warranty/terms-and-conditions http://www.acuitybrands.com/support/warranty/terms-and-conditions

Dummy

Craft stunning, dynamic lighting displays with the Pharos

Lighting Control Kit offering fully preprogrammed scenes, precise timelines, and real-time manual overrides for ultimate creativity and control.

The Pharos Kit has everything you need to bring your lighting design to life. It includes the Lighting Playback Controller (LPC), Pharos Designer Touch Panel Station (TPS 5 or 8), access to

Pharos Designer software, a Power Over Internet (POE) switch, DIN rail sections, and Cat5 jumper cables.

Description

Project Name Qty

Type Catalog / Part Number

1 DMX Universe Kit Shown

1 DMX Universe Kit Pharos Touch Panel Station 5 or 8 (TPS 5 or TPS 8)

Designer Lighting Playback Controller 1 (LPC 1)

8-Port Gigabit Ethernet PoE Switch

Features

2 DMX Universes Kit Pharos Touch Panel Station 5 or 8 (TPS 5 or TPS 8)

Designer Lighting Playback Controller 2 (LPC 2)

8-Port Gigabit Ethernet PoE Switch

1 Ethernet DMX Universe Kit Pharos Touch Panel Station 5 or 8 (TPS 5 or TPS 8)

Designer Lighting Playback Controller 1 (LPC 1)

8-Port Gigabit Ethernet PoE Switch

Mounting Accessories Single Gang Junction Box

8-port Gigabit Ethernt PoE Switch Bracket

DIN Rail

Cat5e Patch Cable

TPS Size Touch Panel Station 5", Touch Panel Station 8"

TPS Bezel Color BK: Black Bezel

WH: White Bezel

Specification Sheet Control Systems Pharos® Lighting Control Kit

1220 Marie-Victorin Blvd., Longueuil, QC, J4G 2H9, CAN | T 514.937.3003 | 1.877.937.3003 | info@lumenpulse.com www.lumenpulse.com www.lumenpulse.com/products/5125

LMPG Inc. reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.

2025.05.01 Copyright © 2025 LMPG Inc.

JC - R9

1 / 6

Kit Contents

1 DMX Universe Kit

A - TPS 5 or TPS 8

B - 8-Port PoE Gigabit Switch

C - LPC 1

D - DIN Rail for LPC

E - 50 ft Cat5e Patch Cable (2x)

F - Bracket for PoE Switch

2 DMX Universes Kit

A - TPS 5 or TPS 8

B - 8-Port PoE Gigabit Switch

C - LPC 2

D - DIN Rail for LPC

E - 50 ft Cat5e Patch Cable (2x)

F - Bracket for PoE Switch

1 Ethernet DMX Universe Kit

A - TPS 5 or TPS 8

B - 8-Port PoE Gigabit Switch

C - LPC 1

D - Bracket for PoE Switch

E - 50 ft Cat5e Patch Cable (2x)

Specification Sheet Control Systems Pharos® Lighting Control Kit

1220 Marie-Victorin Blvd., Longueuil, QC, J4G 2H9, CAN | T 514.937.3003 | 1.877.937.3003 | info@lumenpulse.com www.lumenpulse.com www.lumenpulse.com/products/5125

LMPG Inc. reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.

2025.05.01 Copyright © 2025 LMPG Inc.

2 / 6

Mounting Accessory Dimensions

DIN rail (LPC) DIN Rail As Installed

Bracket (For 8-Port PoE Gigabit Switch) Bracket As Installed

Specification Sheet Control Systems Pharos® Lighting Control Kit

1220 Marie-Victorin Blvd., Longueuil, QC, J4G 2H9, CAN | T 514.937.3003 | 1.877.937.3003 | info@lumenpulse.com www.lumenpulse.com www.lumenpulse.com/products/5125

LMPG Inc. reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.

2025.05.01 Copyright © 2025 LMPG Inc.

3 / 6

A - TPS 5 or TPS 8

B - Computer (by others)

C - 50 ft Cat5e Patch Cable

D - Cat5e Patch Cable (by others)

E - 8-Port PoE Gigabit Switch

F - Power input (wiring by others)

G - LPC 1

H - 50 ft Cat5e Patch Cable

I - Data input (Belden 9841 or equivalent, by others)

J - Data output to next CBX (optional, not isolated/not boosted, wiring by others)

K - CBX (order separately)

L - Power and data output to fixture (wiring by others)

M - Power input (100-277V, wiring by others)

N - Data input (Cat5e or better, by others)

O - Ethernet CBX (order separately)

A - TPS 5 or TPS 8

B - Computer (by others)

C - 50 ft Cat5e Patch Cable

D - Cat5e Patch Cable (by others)

E - 8-Port PoE Gigabit Switch

F - Power input (wiring by others)

G - LPC 2

H - 50 ft Cat5e Patch Cable

I - Data input (Belden 9841 or equivalent, by others)

J - Data output to next CBX (optional, not isolated/not boosted, wiring by others)

K - CBX (order separately)

L - Power and data output to fixture (wiring by others)

M - Power input (100-277V, wiring by others)

N - Data input (Cat5e or better, by others)

O - Ethernet CBX (order separately)

* When used with an LPC, the TPS can utilize the second DMX output of the LPC (DMX 2) to output its

DMX.

Typical Wiring Diagrams

1 DMX Universe Kit

TPS EDMX Port Assignments

2 DMX Universes Kit

LPC DMX Port Assignments

Specification Sheet Control Systems Pharos® Lighting Control Kit

1220 Marie-Victorin Blvd., Longueuil, QC, J4G 2H9, CAN | T 514.937.3003 | 1.877.937.3003 | info@lumenpulse.com www.lumenpulse.com www.lumenpulse.com/products/5125

LMPG Inc. reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.

2025.05.01 Copyright © 2025 LMPG Inc.

4 / 6

A - TPS 5 or TPS 8

B - Computer (by others)

C - 50 ft Cat5e Patch Cable

D - Cat5e Patch Cable (by others)

E - 8-Port PoE Gigabit Switch

F - Power input (wiring by others)

G - LPC 1

H - 50 ft Cat5e Patch Cable

I - Data input (Cat5e or better, by others)

J - Data output to next CBX (optional, not isolated/not boosted, wiring by others)

K - Ethernet CBX (order separately)

L - Power and data output to fixture (wiring by others)

M - Power input (100-277V, wiring by others)

1 Ethernet DMX Universe Kit

TPS EDMX Port Assignments

Specification Sheet Control Systems Pharos® Lighting Control Kit

1220 Marie-Victorin Blvd., Longueuil, QC, J4G 2H9, CAN | T 514.937.3003 | 1.877.937.3003 | info@lumenpulse.com www.lumenpulse.com www.lumenpulse.com/products/5125

LMPG Inc. reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.

2025.05.01 Copyright © 2025 LMPG Inc.

5 / 6

How to Order

Housing DMX Universes TPS Size TPS Bezel Color

PHAROS

Pharos® kit U1

1 DMX Universe

U2

2 DMX Universes

U1ENET

1 Ethernet DMX Universe

TPS5

Touch Panel Station 5"

TPS8

Touch Panel Station 8"

BK

Black Bezel

WH

White Bezel

Specification Sheet Control Systems Pharos® Lighting Control Kit

1220 Marie-Victorin Blvd., Longueuil, QC, J4G 2H9, CAN | T 514.937.3003 | 1.877.937.3003 | info@lumenpulse.com www.lumenpulse.com www.lumenpulse.com/products/5125

LMPG Inc. reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.

2025.05.01 Copyright © 2025 LMPG Inc.

6 / 6

1/2

JC - R0

2025.03.13 LMPG Inc. reserves the right to make changes to this product at any time without prior notice and such changes shall be effective immediately.

Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.

5-year limited warranty.© Copyright LMPG Inc. 2025

1220 Marie-Victorin Blvd., Longueuil, QC

J4G 2H9 CA

1.877.937.3003 P. 514.937.3003 F. 514.937.6289

info@lumenpulse.com www.lumenpulse.com

Touch Panel Station 5 Touch Panel Station 8

Specification Sheet Pharos® Touch Panel Station

Client Project Name

Order# Type Qty

Touch Interface:

The vivid color capacitive touchscreen makes navigating your project’s controls appealing and intuitive. It’s quick and easy to activate presets, manual overrides, or use a custom color picker to personalize your lighting. The TPS 5 and TPS 8 put control of the Pharos Designer system at your fingertips.

Customizable:

Create your fully customizable user interface using the free Pharos Designer 2 software. Create multiple pages of controls including buttons, sliders, keypads, as well as color pickers, and configure their appearance and visual feedback. Make it eye-catching by importing your own graphics or picking from one of our attractive themes, with support for extended character sets, such as Arabic, Chinese, Cyrillic, Japanese, and Korean.

Touchscreen Hardware:

The TPS 5 and TPS 8 are designed using superior technology. The new IPS screens have a high DPI, with a resolution of 800 x 480 pixels in a 5” display for TPS 5 and 1024 x 768 pixels in an 8” display for TPS 8. With updated technology, the interface becomes more responsive, offering smoother transitions, higher screen fidelity, and increased processing power for faster page loading.

Designer:

Create interface pages in Pharos Designer Software at the same time you program the controller, and upload in one simple operation.

Installation:

The TPS 5 and TPS 8 ship with an innovative wall-mounting system. The Pharos Universal Mounting Plate can be fitted to a wide range of regulation backboxes, including UK, US, and EU. The TPS 5 and TPS 8 attach to the Mounting Plate via a bayonet twist system, ensuring secure, tool-free installation while keeping the MicroSD card safely out of reach.

Scalable:

Multiple TPS devices can be combined with one or more Pharos Designer controllers on the same network to build the ideal system for your installation. Each TPS is easily programmed using Pharos Designer software.

Network:

The TPS 5 and TPS 8 require any Pharos Designer controllers (sold separately), and links to them using standard protocols over an Ethernet network.

Power-Over-Ethernet:

As a Power-Over-Ethernet (PoE) device, the TPS 5 and TPS 8 can be placed at a remote location and only need a single Ethernet cable to provide both power and data.

TPS 5 Shown

2"5

[140mm]

16"3

[97mm]

Front View

Side View

5 "

1"1

[29mm]

[16mm]

2/2

JC - R0

2025.03.13 LMPG Inc. reserves the right to make changes to this product at any time without prior notice and such changes shall be effective immediately.

Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.

5-year limited warranty.© Copyright LMPG Inc. 2025

1220 Marie-Victorin Blvd., Longueuil, QC

J4G 2H9 CA

1.877.937.3003 P. 514.937.3003 F. 514.937.6289

info@lumenpulse.com www.lumenpulse.com

Touch Panel Station 5 Touch Panel Station 8

Specification Sheet Pharos® Touch Panel Station

Order Code & Variants:

TPS 5 W or TPS 8 W: Designer Touch Panel Station 5” or 8’’ White (Wall-mount touchscreen interface).

Pharos Universal Mounting Plate 5” or 8’’ included.

If no color is specified, TPS 5 B or TPS 8 B will be shipped by default.

Pharos Designer controller required.

Warranty & Certifications:

Warranty: 5 years.

Certifications: CE compliant, UKCA compliant, UL/cUL listed.

Capabilities:

Interfaces:

TPS 8: 8” capacitive, five-point multi-touch; 1024x768 24bpp; 500 cd/m2.

System Limits:

In Project: Maximum 200 remote devices across multiple controllers in a single Pharos Designer 2 project.

Specifications:

Color Information:

Jet Black: Bayblend T65XF (UL94 HB) RAL 9005

Jet Black.

TPS 8 Shown

8 "7

[200mm]

"6

[160mm]

Front View

78 "7

[200mm]

"6

[160mm]

16"

[20mm]

[33mm]

Back Perspective View

Pathway-PWREP-IP65

Acuity Brands | One Lithonia Way, Conyers GA 30012 Phone: + 1 866 617 3074 www.pathwayconnect.com © 2023-2024 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 04/04/24

REPEATER IP65

D M X / R D M O P T O - S P L I T T E R

OVERVIEW

The Pathway DMX Repeater series of opto-splitters are an essential component of DMX distribution systems, permitting star-wiring configurations while isolating and protecting equipment from electrical faults.

This 4 port repeater supports the bi-directional communication standard E1.20 Remote Device Management (RDM).

The Pathway PWREP IP65 P4 provides the necessary isolation between the DMX control and the line voltage to allow combining of Line Voltage and DMX into a single cable to luminaries.

WARRANTY

3-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions

NOTE

Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.

FEATURES

• 4 Outputs

• No fuses - self-resetting port protection recovers from voltage faults

• 120-277VAC, 50/60Hz power supply

• RDM-compliant non-isolated 5th output port

• LED Indicators for Port Activity, Power, DMX Input, and Iso Power

ORDERING INFORMATION

PWREP EXAMPLE: PWREP IP65 P4 TERM RDM

Series Form Factor Port Quantity Port Type Model

PWREP Pathway DMX Repeater IP65 IP65 P4 4 DMX Ports TERM Compression-Fit Terminal RDM E1.20 RDM Compliant

CATALOG

NUMBER

DATE

PROJECT

https://www.acuitybrands.com/support/warranty/terms-and-conditions

Acuity Brands | One Lithonia Way, Conyers GA 30012 Phone: + 1 866 617 3074 www.pathwayconnect.com © 2023-2024 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 04/04/24

REPEATER WALL-MOUNT DMX/RDM OPTO-SPLITTER | 2

SPECIFICATIONS

Electrical Input Ratings 120-277VAC, 50/60Hz

Isolation & Fault Protection PWREP IP65 P4 TERM RDM 3000V isolation between DMX Ports (1500V isolation from any DMX port and DMX Thru) 250V fault protection on DMX ports

Regulatory Compliance ETL

Mechanical Dimensions PWREP IP65 P4 TERM RDM 10.24"W x 6.3" H x 3.56" D (260mm x 160mm x 90.5mm)

Weight PWREP IP65 P4 TERM RDM 5.5lbs (2.49kg)

Environmental Operating Temperature 14°F to 113°F (-10°C to 45°C)

Relative Humidity 5-95%, non-condensing

General Compliance PWREP IP65 P4 TERM RDM

ANSI E1.11 DMX512-A R2013

ANSI E1.20 RDM - Remote Device Management

Government Procurement BAA Buy America(n) Act: Product qualifies as a domestic end product under the Buy American Act as implemented in the FAR and DFARS. Product also qualifies as manufactured in the United States under DOT Buy America regulations.

BABA Build America Buy America: Product qualifies as produced in the United States under the definitions of the Build America, Buy America Act.

Please refer to www.acuitybrands.com/buy-american for additional information.

https://www.acuitybrands.com/resources/trending-topics/buy-american

Acuity Brands | One Lithonia Way, Conyers GA 30012 Phone: + 1 866 617 3074 www.pathwayconnect.com © 2023-2024 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 04/04/24

REPEATER WALL-MOUNT DMX/RDM OPTO-SPLITTER | 3

WIRING

L1 N

V+V-

SH

LD

G N

D

D

C O

M

D

POWER IN

9-36VDC

6W MAXDMX THRUDMX IN

4-PORT DMX/RDM SPLITTER

EAR

TH

G N

D

RDM DRDM CRDM BRDM A

ISO PWR DISO PWR CISO PWR BISO PWR A

POWER

PROCESSOR

DMX/RDM

ISO INPUT PWRSH

LD

G N

D

D

C O

M

D

SH

LD

G N

D D

C O

M

D

SH

LD

G N

D D

C O

M

D

SH

LD

G N

D D

C O

M

D

SH

LD

G N

D D

C O

M

D

L1 N

6.30” [160 mm]

10.24” [260 mm]

Mounting 1/2" recessed

2" deep 1/4" thru hole

4.375” [111 mm]

9.375” [240 mm]

DMX In from Control System Status LEDs

DMX Thru to other DIN devices in same enclosure

Isolated DMX512 Outputs to devices

(x4)

DIMENSIONS