C12_Att_01_material_equip_in-place_list.xlsx

XLSX spreadsheet 23 KB Posted

Attached to
Bldg 82 HVAC Installation Federal contract opportunity
Solicitation number
N0025324Q0042
Issued by
Department of the Navy Naval Sea Systems Command

About this file

This document is an installed equipment list for a construction contract to install a new HVAC system in Building 82. The key details are:

The contract is for the Naval Sea Systems Command (NAVSEA) to install one new 4-ton ductless split system with 4 indoor units and new air diffusers in the NCIS area of Building 82. The contractor will also remove two existing portable air conditioners and restore the windows. The work will be performed at Keyport, WA and Naval Base Kitsap - Bangor, Silverdale, WA. This solicitation is 100% set aside for small businesses. The installed equipment list provides details on the new equipment being installed, including descriptions, quantities, unit costs, manufacturer information, and installation dates.

View the file

Other files for this federal contract opportunity

Other files attached to Bldg 82 HVAC Installation, newest first.
File Type Posted
C24_N0025324Q00420003.pdf PDF
C24_N0025324Q00420002.pdf PDF
C24_N0025324Q00420001.pdf PDF
C12_N0025324Q0042.pdf PDF
C12_Att_07_OSHA-Calculating Injury and Illness Incident Rate.pdf PDF
C12_Att_10_Safety Requirements for Contractors and Sub (30 AUG 2021).pdf PDF
C12_Att_09_Contractors Guide to Env Compliance 2019 Rev1.docx DOCX document
C12_Att_04_bid form.docx DOCX document
C12_Att_06_Safety Data Sheet.docx DOCX document
C12_Att_05_Past Performance References.docx DOCX document
C12_Att_12_Joint Venture Proposed Distribution of Work Form.docx DOCX document
C12_Att_11_Wage_Determination.pdf PDF
C12_Att_08_OPSEC Guide for Defense Contractors_2016.pdf PDF
C12_Att_02_PPI Form.docx DOCX document
C12_Att_03_sched_of_values.xlsx XLSX spreadsheet
Show all 15

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Installed Equipment

Contract No:
Project Title:Bldg 82 HVAC Installation
Asset NumberDescriptionLong DescriptionBuilding No.Room No.Asset QtyUOMReplacement CostSupplier/VendorManufactureModel No.Serial No.Manufacture Warranty Expiration DateInstallation DateEquipment Removed
New Asset Number
(Note 4)Description of Equipment or materials Installed
(Note 3)Additional Relevant Information (e.g. size, capacity, limits, etc…)Building #Room Number of installed equipmentQuantity
(Note 1)Standard Unit of Measure for asset installedCost (material and labor to remove (if applicable) and install asset
(Note 2)Name/Address/Email/
Phone NumberManufacturerModel number of installed equipmentSerial number of installed equipmentMM/DD/YYYY
(Where no Manufacture Warranty use Contract Warranty Date)MM/DD/YYYY
Asset Number of removed asset

(if no label present on asset this column is Not Applicable) (Note 3)

Notes:
1. When installing assets with a unit of issue of "EACH", there must be a separate line item for each asset.
2. Costing data is to include the cost (labor and material) of removing the old asset and installing the new asset.
3. Enter equipment installed in column B and equipment removed in column O.
4. This column is not necessary for the final submittal from the contrator. FMS will create asset number when they receive the spreadsheet from the government.

Example

Contract No:NXXXXX-21-C-XXXX
Project Title:Replace Breathing Air Filters and Install Carpet
Asset NumberDescriptionLong DescriptionBuilding No.Room No.Asset QtyUOMReplacement CostSupplier/VendorManufactureModel No.Serial No.Manufacture Warranty Expiration DateInstallation DateEquipment Removed
New Asset Number
(Note 4)Description of Equipment or materials Installed
(Note 3)Additional Relevant Information (e.g. size, capacity, limits, etc…)Building #Room Number of installed equipmentQuantity
(Note 1)Standard Unit of Measure for asset installedCost (material and labor to remove (if applicable) and install asset
(Note 2)Name/Address/Email/
Phone NumberManufacturerModel number of installed equipmentSerial number of installed equipmentMM/DD/YYYY
(Where no Manufacture Warranty use Contract Warranty Date)MM/DD/YYYY
Asset Number of removed asset

(if no label present on asset this column is Not Applicable) (Note 3)

Breathing Air Filterlocated behind cabinet next to AHU-1 op switch50941011EA$2,400.00Atlas - 1234 Street Way, America WA 98383 atlas@msn.com/
360-123-4567Atlas CopcoFTX345BUSTB00043563/12/213/12/175094-0-101-154A-40-1H
Breathing Air Filterlocated behind cabinet next to AHU-1 op switch50941011EA$2,400.00Atlas - 1234 Street Way, America WA 98383 atlas@msn.com/
360-123-4567Atlas CopcoFTX345BUSTB00043573/12/213/12/175094-0-101-154A-40-1J
CARPET5094116, 117, 118300SQFT$4,200.00Carpets - 156 Lumber Way,

Bert WA 98317 carpets@msn.com

360-266-0154MohawkMOHAWH - STRBUN/A3/21/193/12/17N/A
Notes:
1. When installing assets with a unit of issue of "EACH", there must be a separate line item for each asset.
2. Costing data is to include the cost (labor and material) of removing the old asset and installing the new asset.
3. Enter equipment installed in column B and equipment removed in column O.
4. This column is not necessary for the final submittal from the contrator. FMS will create asset number when they receive the spreadsheet from the government.

File details come from the government source that posted it. Updated .