BID 2025-35 Clarifying Questions -2.pdf
PDF 129 KB Posted
- Attached to
- Marquam Sand Shed and Retaining Wall Project
- Solicitation number
- S-C01010-00013389
- Issued by
- Clackamas County, Oregon
About this file
This document is a Response to Clarifying Questions for Invitation to Bid #2025-35 for the Marquam Sand Shed project issued by Clackamas County. The document addresses two specific technical questions submitted by potential bidders regarding material specifications for the construction project. The first question sought clarification on metal roofing and siding specifications, which were detailed as structural 5/8" T1-11 siding and a generic 26ga PBR panel roofing in a factory standard color. The second question addressed roof sheathing material availability, with the county responding that the specified material is available.
The clarifying questions document does not provide additional pricing, set-aside, or funding information beyond the technical specifications. It serves as a supplemental communication to provide precise details about construction materials to ensure bidders have accurate information for preparing their proposals. The document maintains the standard disclaimer that these clarifications do not alter the original Invitation to Bid and are provided solely for informational purposes to interested firms participating in the Marquam Sand Shed project procurement process.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
INVITATION TO BID #2025-35
Marquam Sand Shed (“BID”)
RESPONSE TO CLARIFYING QUESTIONS
April 16, 2025
Note that these are questions submitted by interested firms to the above referenced solicitation.
The below answers are for clarification purposes only and in no way alter or amend the BID as published.
1. I was wondering if there are specifications for the metal roofing and siding? I noticed that the ITB has the specs for poles, but not the other ones. And the plans have the engineering documents attached to them Answer: Siding and nailing is called out as structural 5/8” T1-11, specified on sheet PFB2, lower left corner, #1 Elevation Views General Notes.
Roofing is a generic full length, 26ga. PBR panel, 36” width in factory standard color.
Manufacturer’s standard color chart to be provided to the County for selection. Roof panels, gable, eave, and ridge metal shall be from the same manufacturer. This will be a submittal by the selected contractor.
2. On drawing number 3 of 4 detail A indicates to use 5/8 OSB for roof sheathing, but my supplier tells me they don’t make a 5/8 OSB, can you clarify this detail.
Answer: we have varied this material is available.
End of Clarifying Questions-2
File details come from the government source that posted it. Updated .