Varsol_MSDS.xml

http://www.pureforms.com Acrobat,Forms,acrobat form,pureforms,database form,fillable,PF-Printmerge,PF-Merge,email,email merge,email Acrobat,Dbase,Goldmine,Act!2000,Excel,FoxPro,Outlook,Paradox,xls,Lotus,XML,IRS,INS,accountant,tax preparation,image,fax PF-Merge v2.2.5 (formerly PF-Printmerge) Material Safety Data Sheet WHMIS (Pictograms) WHMIS (Classification) Personal protective equipment Class B-3: Combustible liquid with a flash point between 37.8°C (100°F) and 93.3°C (200°F).

Class D-2B: Material causing other toxic effects (Toxic). Section 1. Product and Company Identification Product Solvent 3139 (Petroleum Distillat) name / Trade name Associated SOLVENT 3139 Product’s Item Code CAS # 8052-41-3 Synonym dry cleaning safety solvent; mineral spirits; varnoline; naphtha safety solvent; white spirits Validation date 1/10/2012. Chemical family Solvent. Chemical formula C9~C11 paraffin(85%) + aromatics(15%) Print date 1/13/2012. Manufacturer/Supplier Recochem Inc.

850 Montee de Liesse Montreal, Quebec H4T 1P4

(514) 341-3550 www.recochem.com In case of Recochem Inc.

emergency Communicat i ons and Regulat ory Affairs Department

(905) 791-1788 Material uses Consumer products: Various.

Other non-specified industry: DRY CLEANING; SPOT AND STAIN REMOVAL. Section 2. Hazards identification Emergency Overview Potential Acute Health Effects Note to Physician WARNING! COMBUSTIBLE LIQUID AND VAPOR. Combustible liquid and vapor. Keep away from heat, sparks and flame. Avoid breathing vapor or mist. Avoid contact with skin and clothing. Use only with adequate ventilation. Keep container tightly closed and sealed until ready for use. See section 11 for more detailed information on health effects and symptoms. This product may cause mild irritatation to eyes and skin upon contact. Prolonged and repeated contact with skin can cause drying of the skin resulting in irritation and dermatitis. Inflammation of the eye is characterized by mild redness, watering, and itching. Skin inflammation is characterized by mild itching, scaling, reddening. Ingestion can cause burning sensation, vomiting, drowsiness and in severe cases pulmonary edema. Inhalation of excessive amounts may result in impairment, such as drowsiness, lack of coordination, headache and nausea. Aspiration hazard if swallowed. Can enter lungs and cause damage. Small amounts of liquid aspirated into the respiratory system during ingestion or from vomiting may cause mild to severe pulmonary injury and possible death. Continued on next page Section 3. Composition, information on ingredients Canada Name CAS number Conc. (% w/w) Stoddard solvent 8052-41-3 100 There are no ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section. Section 4. First aid measures Eye contact Skin contact Inhalation Ingestion Check for and remove any contact lenses. Immediately flush eyes with plenty of water for at least 20 minutes, occasionally lifting the upper and lower eyelids. Get medical attention immediately. In case of contact, immediately flush skin with plenty of water for at least 20 minutes while removing contaminated clothing and shoes. W ash clothing before reuse. Clean shoes thoroughly before reuse. Get medical attention immediately. Move exposed person to fresh air. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention immediately. W ash out mouth with water. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention immediately. Notes to physician No specific treatment. Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled. Section 5. Fire-fighting measures Products of combustion Fire-fighting media and instructions Fire Hazards Explosion Hazards Decomposition products may include the following materials: carbon dioxide carbon monoxide Use dry chemical, CO 2 , water spray (fog) or foam. Container explosion may occur under fire conditions or when heated. Vapor may travel a considerable distance to source of ignition and flash back. Vigorously supports combustion. Combustible when exposed to heat or flame. Vapor may travel a considerable distance to source of ignition and flash back. Section 6. Accidental release measures Small spill and leak Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Use spark-proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal contractor. Continued on next page Large spill and leak Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see section 13). Use spark-proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled product. Note: see section 1 for emergency contact information and section 13 for waste disposal. Section 7. Handling and Storage Handling Storage Put on appropriate personal protective equipment (see section 8). Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Do not ingest. Avoid contact with eyes, skin and clothing. Avoid breathing vapor or mist. Use only with adequate ventilation. W ear appropriate respirator when ventilation is inadequate. Do not enter storage areas and confined spaces unless adequately ventilated. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Store and use away from heat, sparks, open flame or any other ignition source. Use explosion-proof electrical (ventilating, lighting and material handling) equipment. Use non-sparking tools. Take precautionary measures against electrostatic discharges. To avoid fire or explosion, dissipate static electricity during transfer by grounding and bonding containers and equipment before transferring material. Empty containers retain product residue and can be hazardous. Do not reuse container. Do not store above the following temperature: 43°C (109.4°F). Store in accordance with local regulations. Store in a segregated and approved area. Store in original container protected from direct sunlight in a dry, cool and well- ventilated area, away from incompatible materials (see section 10) and food and drink. Eliminate all ignition sources. Separate from oxidizing materials. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination. Section 8. Exposure controls/personal protection Engineering controls Personal protection Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapor or dust concentrations below any lower explosive limits. Use explosion-proof ventilation equipment. Eyes Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists or dusts. Recommended: splash goggles Body Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. United States Respiratory Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. Hands Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. >8 hours (breakthrough time): nitrile rubber Product name Exposure limits Continued on next page Validated on 1/10/2012. Solvent 3139 (Petroleum Distillat) Page: 4/7 Stoddard solvent ACGIH TLV (United States, 1/2008). TWA: 100 ppm 8 hour(s). TWA: 525 mg/m³ 8 hour(s). OSHA PEL 1989 (United States, 3/1989). TWA: 100 ppm 8 hour(s). TWA: 525 mg/m³ 8 hour(s). NIOSH REL (United States, 6/2008). TWA: 350 mg/m³ 10 hour(s). CEIL: 1800 mg/m³ 15 minute(s). OSHA PEL (United States, 11/2006). TWA: 500 ppm 8 hour(s). TWA: 2900 mg/m³ 8 hour(s). Canada Occupational exposure limits No exposure limit value known. Section 9. Physical and chemical properties Physical State and Liquid.

Appearance Odour KEROSENE-LIKE [Slight] Molecular weight Not available. Taste Not available. pH Not available. Colour Colorless. Boiling/condensation 153.9 to 202.2°C (309 to 396°F) point Volatility 100% (v/v), 100% (w/w) Melting/freezing point -58°C (-72.4°F) Evaporation 0.1 (Butyl acetate. = 1) rate Relative density 0.78 Odour Not available.

Threshold Vapor pressure 0.29 kPa (2.2 mm Hg) Viscosity Kinematic: 0.0114 cm 2 /s (1.14 cSt) Vapour Density 5 [Air = 1] Solubility Easily soluble in the following materials: diethyl ether, n- octanol.

Insoluble in the following materials: water. VOC content 101.3 % (w/w) [ISO 11890-1] Other Not available.

Properties The product is: Combustible. Auto-ignition temperature 232.22°C (450°F) Flash point Closed cup: 38.85 to 42.85°C (101.9 to 109.1°F) [Tagliabue. (ASTM D56)] Flammable limits Lower: 1% Upper: 13.3% Fire hazards in the Flammable in the presence of open flames, sparks and static discharge. This product is combustible if exposed to presence of various heat or when in involved in a fire and in contact with combustible materials which may act as a wick.

substances Section 10. Stability and reactivity Stability Conditions of instability Incompatibility with various substances The product is stable. Not available. Reactive with oxidizing agents. Hazardous decomposition products Under normal conditions of storage and use, hazardous decomposition products should not be produced. Section 11. Toxicological Information Canada Acute toxicity Product/ingredient name Result Species Dose Exposure Conclusion/Summary Not available. Chronic toxicity Conclusion/Summary Not available. Carcinogenicity Conclusion/Summary Not available. Mutagenicity Conclusion/Summary : Teratogenicity Conclusion/Summary : Reproductive Toxicity Conclusion/Summary : IDLH : Not available. Not available. Not available. 20000 mg/m³ Section 12. Ecological information For accidental discharges into the environment, see Section 6:"Accidental Release Measures" for suggested instructions. Ecotoxicity Canada Aquatic ecotoxicity : No known significant effects or critical hazards. Conclusion/Summary : Not available. Biodegradability Conclusion/Summary : Not available. Section 13. Disposal considerations Waste information The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe way. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Disposal of this product, solutions and any by- products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Disposal should be in accordance with applicable regional, national and local laws and regulations. Section 14. Transport information Canada TDG Classification Class Subsidiary class Proper Shipping Name (Canada) TDG UN number Packing Group Special provisions IMDG Classification Class Subsidiary class Proper Shipping Name IMDG UN number Packing Group Marine pollutant Class 3: Flammable liquid. - PETROLEUM DISTILLATES, N.O.S. UN 1268 III In containers of 450L or less this product is not classified as a Dangerous Goods according to TDG exemption 1.33 Class 3: Flammable liquid. - PETROLEUM DISTILLATES, N.O.S. UN 1268 III Not a pollutant. No placard (handling and hazard label) required. Special provisions In containers of 5 L (5Kg) capacity or less this product is classified as a "Consumer Commodity" under IMDG regulations. United States DOT (Classification) Class Subsidiary class Proper Shipping Name (United States) DOT UN number Packing Group Combustible liquid. - PETROLEUM DISTILLATES, N.O.S. UN 1268 III Special provisions In containers of 454L or less this product is not classified as a Gangerous Good according to exception 173.150 f(1-2) International Air Transport Association (IATA) For air shipment classification and associated regulations, please refer to the latest edition of IATA Dangerous Goods Regulations. Section 15. Regulatory information WHMIS Classification (Canada) Canada Domestic Substances List (DSL) Status HCS Classification (U.S.A.) Class B-3: Combustible liquid with a flash point between 37.8°C (100°F) and 93.3°C (200°F). Class D-2B: Material causing other toxic effects (Toxic). This product and/ or all of its components are on the DSL. Combustible liquid Target organ effects U.S.A. Regulatory Lists Hazardous Material Information System This product and/ or all of its components are on the TSCA inventory list. National Fire Protection Flammability 2 Health 1 Flammability 2 Reactivity 0 Personal protection G (U.S.A.) Association Health 1 0 Reactivity (U.S.A.) Specific hazard Section 16. Other information Validated and verified by Compliance and Technical Information Manager on 1/10/2012 ph.# 905-878-5544. Printed 1/13/2012. Notice to reader T o th e bes t o f ou r knowledge , th e info r m a tio n containe d he r e i n i s accu r a te . H oweve r , neithe r th e abov e na m ed supplie r no r an y o f its s u b si d ia r ies ass u m es a n y lia b ility w h ats o ever f o r the accuracy or completeness of the information contained herein.

Fina l dete r m i natio n o f suitabilit y o f an y m ate r i a l i s th e sol e r esponsibilit y o f th e use r . A l l m a te r i al s m a y p r esen t unknow n h aza r d s a n d s hou ld b e u sed wi t h ca ut i on . Al thoug h ce r t ain hazards are described herein, we cannot guarantee that these are the only hazards that exist. MSDS are available at www.recochem.com