Attch_1_CDRLs.pdf

PDF 198 KB Posted Apr 10, 2015

Attached to: On-Orbit Reprogrammable Digital Waveform Generator (ORDWG) Federal contract opportunity
Solicitation number: BAA-RVKV-2014-0004
Issued by: Department of the Air Force Materiel Command Research Laboratory

About this file

From the source

Attachment 1 CDRLS

View the file

Other files for this federal contract opportunity

Other files attached to On-Orbit Reprogrammable Digital Waveform Generator (ORDWG), newest first.
File	Type	Posted
Attachment_5_Updated_13May2015.pdf	PDF	May 13, 2015
Attachment_4_BAA_Proposal_Content_Checklist.pdf	PDF	May 13, 2015
05062015_BAA_V27_Amend_2_FINAL.pdf	PDF	May 13, 2015
Q A_2.pdf	PDF	May 6, 2015
Q A_1.pdf	PDF	May 1, 2015
BAA_V27_Amend_1_04152015.pdf	PDF	Apr 21, 2015
BAA-RVKV-2014-0004.pdf	PDF	Apr 10, 2015
Attch_2_DD254.pdf	PDF	Apr 10, 2015
Attch_3_Cost_Proposal_Instructions_(Non-APC)_Jun_2014.pdf	PDF	Apr 10, 2015

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DD Form 1423-1, SEP 97

CONTRACT DATA REQUIREMENTS LIST (1 Data Item) Form Approval OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................: A

C. CATEGORY..............................:

D. SYSTEM/ITEM........: On-orbit Reprogrammable Digital Waveform Generator (ORDWG)

E. CONTRACT/PR NO.

F. CONTRACTOR.........:

1. DATA ITEM NO........................: A001

2. TITLE OF DATA ITEM............: Presentation Material

3. SUBTITLE..................................: N/A

4. AUTHORITY.............................: DI-ADMN-81373

5. CONTRACT REFERENCE......:

6. REQUIRING OFFICE..............: AFRL/RVEP

7. DD250 REQ................................: No

8. APP CODE.................................: A

9. DIST. STATEMENT REQUIRED......: See Block 16

10. FREQUENCY......................................: See Block 16

11. AS OF DATE........................................: See Block 16

12. DATE OF FIRST SUBMISSION: See Block 16

13. DATE OF SUBSEQUENT SUBM.: See Block 16

14. DISTRIBUTION

A. ADDRESSEES

B. COPIES

Draft Final

AFRL/RVEP 1 1

ACO Lt Lt AFRL DET 8/RVKVE Lt Lt

SMC/GP 1 1

SMC/XR 1 1

15. TOTAL: 3 3

16. REMARKS

Blk 9: All technical data containing unlimited rights data (including electronic media) shall be marked I.A.W. DoD Directive 5230.24 with Distribution Statement B or C depending on the content. The government will review all Limited Data Rights assertions in any document prior to the final determination of the appropriate statement.

All technical data containing limited rights data (including electronic media) shall be marked I.A.W. DoD Directive 5230.24 with Distribution Statement B “Distribution authorized to U.S. Government agencies only; Proprietary Information and Export Controlled: DFARS Limited Data Rights; (date of determination). Other requests for this document shall be referred to AFRL/RVEP, 3550 Aberdeen Avenue, SE, Kirtland AFB, NM 87117-5776.” ADD THIS ENTIRE DISTRIBUTION STATEMENT TO

THE BOTTOM OF EVERY PAGE.

All technical data containing unlimited data rights (including electronic media) shall be marked I.A.W. DoD Directive 5230.24 with Distribution Statement C “Distribution authorized to U.S. Government agencies and their contractors; Critical Technology and Export Controlled; (date of determination). Other requests for this document shall be referred to AFRL/RVEP, 3550 Aberdeen Avenue, SE, Kirtland AFB, NM 87117-5776.” ADD THIS ENTIRE DISTRIBUTION STATEMENT TO THE BOTTOM OF

EVERY PAGE.

EXPORT CONTROL WARNING: All technical data (including electronic media) shall be marked as follows: “WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec. 2751, et seq.) or the Export Administration Act of 1979, as amended. Title 50 U.S.C. App 2401 et seq. Violations of these export laws are subject to severe criminal penalties. Disseminate I.A.W. the provisions of the DoD Directive 5230.25.” ADD "WARNING:

EXPORT CONTROLLED" TO THE BOTTOM OF EVERY PAGE.

All technical data (including electronic media) shall be marked with the following statement: “DESTRUCTION NOTICE—For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.” Electronic versions must be submitted in a manner consistent with protecting export control and limited information.

Frequency and Submission Dates (Blocks 10, 12 & 13): The contractor shall deliver draft presentation materials 5 business days prior to meetings. Revised (final) versions of review materials shall be delivered within 10 business days following review meetings.

Description: Contractor shall provide copies of presentation materials (slides) to the Government for all program meetings and program reviews to include the kick-off meeting, semi-annual review meetings (technical interchange meetings), and design reviews (PDR and CDR). In the case of multiple awards, each contractor will be expected to annually brief their technical progress to date not only to the Government, but also to any other contractor(s) awarded a contract under this BAA, as well as potential system primes for GPS and follow-on programs. Company proprietary and cost information may be excluded from the non-Government presentation. Anticipate at least a third of all major reviews will take place in Los Angeles, CA for the convenience of attendance of GPS Program Office (SMC/GP) personnel.

Submission via unencrypted or unsecure email is not permitted. Draft and final versions of materials shall be submitted via AMRDEC (https://safe.amrdec.army.mil/SAFE/).

17. PRICE GROUP: 18. ESTIMATED TOTAL PRICE :

G. PREPARED BY:

J C

Misty D. Crown I. APPROVED BY: Leah Ransom H. DATE: 08 December 2014 J. DATE: 10 December 2014

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................: A

C. CATEGORY..............................:

D. SYSTEM/ITEM........: On-orbit Reprogrammable Digital Waveform Generator (ORDWG)

E. CONTRACT/PR NO.

F. CONTRACTOR.........:

1. DATA ITEM NO........................: A002

2. TITLE OF DATA ITEM............: Status Report

3. SUBTITLE..................................: N/A

4. AUTHORITY.............................: DI-MGMT-80368A

5. CONTRACT REFERENCE......:

6. REQUIRING OFFICE..............: AFRL/RVEP

7. DD250 REQ................................: No

8. APP CODE.................................:

9. DIST. STATEMENT REQUIRED......: See Block 16

10. FREQUENCY......................................: See Block 16

11. AS OF DATE........................................: See Block 16

ACO Lt Lt AFRL DET 8/RVKVE Lt Lt

SMC/GP 0 1

SMC/XR 0 1

15. TOTAL: 1 3

Blk 9: All technical data containing unlimited rights data (including electronic media) shall be marked I.A.W. DoD Directive 5230.24 with Distribution Statement B or C depending on the content. Statement B shall be applicable for financial reports, Statement C shall be applicable for status reports. The government will review all Limited Data Rights assertions in any document prior to the final determination of the appropriate statement.

BOTTOM OF EVERY PAGE.

OF EVERY PAGE.

EXPORT CONTROLLED" TO THE BOTTOM OF EVERY PAGE.

Frequency and Submission Dates (Blocks 10, 12 & 13): The contractor shall deliver monthly financial execution reports and bi-monthly status reports within 10 days following the first 30 days of the technical period of performance, and every 30 days thereafter (financial execution reports) and 60 days thereafter (status reports) through the technical period of performance.

Description: The Status Report will be tailored for this program. Financial data required monthly; cost to date by month will be presented, any non-cancellable commitments, as will both baseline and current projection of cost forward to contract completion. Data to be presented both in tabular and graphic format. Technical status required bi-monthly.

Funds & Manhour Expenditure Report shall include an itemized list of costs and labor expended during the reporting period (30 days) and identifies the SOW task the cost/labor supported. It will also include a cumulative report of all costs and labor expended since the beginning of the effort through the end of the reporting period, as well as non-cancellable commitments to date.

Format: Contractor Format is acceptable. MS Word shall be used for text documents, MS Excel shall be used for spreadsheet and graphic data, and MS PowerPoint shall be used for presentation material.

Submission via unencrypted or unsecure email is not permitted. Draft and final versions of materials shall be submitted via AMRDEC (https://safe.amrdec.army.mil/SAFE/).

17. PRICE GROUP: 18. ESTIMATED TOTAL PRICE :

G. PREPARED BY:

J C

Misty D. Crown I. APPROVED BY: Leah Ransom H. DATE: 08 December 2014 J. DATE: 10 December 2014

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................: A

C. CATEGORY..............................:

D. SYSTEM/ITEM........: On-orbit Reprogrammable Digital Waveform Generator (ORDWG)

E. CONTRACT/PR NO.

F. CONTRACTOR.........:

1. DATA ITEM NO........................: A003

2. TITLE OF DATA ITEM............: Scientific and Technical Report Checklist

3. SUBTITLE..................................: Final Report

4. AUTHORITY.............................: DI-MISC-80711A

5. CONTRACT REFERENCE......:

6. REQUIRING OFFICE..............: AFRL/RVEP

7. DD250 REQ................................: Yes

8. APP CODE.................................: A

9. DIST. STATEMENT REQUIRED......: See Block 16

10. FREQUENCY......................................: See Block 16

11. AS OF DATE........................................: See Block 16

Final CRC

ACO Lt Lt AFRL DET 8/RVKVE Lt Lt

THE REPORT WILL BE PUBLISHED WITH THE DEFENSE TECHNICAL INFORMATION CENTER (DTIC) BY AFRL STINFO OFFICE. Under no circumstances shall the contractor submit either the final report or the camera-ready technical report to DTIC.

Blk 4: GUIDANCE FOR PREPARATION OF THE REPORT: The Scientific and Technical Report shall be prepared I.A.W. the most current AFRL ANSI/NISO Standard Z39.18-2005, or other most current report preparation guidance. The contractor shall complete the most current SF 298 Report Documentation Page, and submit it with the report. The contractor shall complete the following blocks of the SF 298: Blocks 2-5a, 6, 7, 8 and 13 (if applicable), and 14-16c. The contractor shall complete and sign the most current AFRL Form 25, AFRL Quality Final Technical Report Checklist, and submit it with the report. If the completed and signed AFRL Form 25 does not accompany the report, the deliverable is considered incomplete. Incomplete reports will be immediately returned to the contractor. Following AFRL technical and STINFO reviews, any revisions required will be returned to the contractor. NOTE: The report preparation guidance, SF 298, and AFRL Form 25 are available at: http://www.kirtland.af.mil/prs.

The contractor shall deliver two editable electronic copies of the report. The electronic copies shall be an editable .pdf file and the most current version of Microsoft Word. A CD-ROM (CD-R) is the acceptable media for submittal (CD-RWs are not acceptable). Electronic media shall be marked I.A.W. the AFRL ANSI/NISO Standard Z39.18-2005 guidelines, or other most current report preparation guidance. Submission via unencrypted or unsecure email is not permitted.

Blk 7: UPON NOTIFICATION OF ACCEPTANCE OF THE SCIENTIFIC AND TECHNICAL REPORT FROM THE PROGRAM OFFICE, the contractor shall submit the final Receiving Report (DD Form 250) in WAWF.

In preparing the final DD Form 250, code the shipment number with a “Z.” Do not upload the Scientific and Technical Report into WAWF or DTIC. NOTE: SUBMITTAL OF THE DD FORM 250Z PRIOR TO ACCEPTANCE NOTIFICATION WILL RESULT IN REJECTION OF THE DD FORM 250Z FINAL RECEIVING REPORT.

Blk 9: A Scientific and Technical Report which contains company proprietary data must have a separate volume for the unlimited Government rights data, and a separate volume for the company proprietary data, marked IAW the instructions given below.

The volume containing company proprietary data IAW the data rights assertions attached to this contract shall be marked IAW DFARS 252.227-7013, and with Distribution Statement B shown in 9.1 below, and other required markings as shown in 9.3 and 9.4 below:

The volume containing unlimited Government rights material (including electronic media/CD-R) shall be marked I.A.W. DoD 5230.24 with Distribution Statement C shown in 9.2 below, and other required markings as shown in 9.3 and 9.4 below.

9.1: “Distribution authorized to U.S. Government agencies only; Proprietary Information and Export Controlled: DFARS Limited Data Rights; (date of determination). Other requests for this document shall be referred to AFRL/RVEP, 3550

Aberdeen Avenue, SE, Kirtland AFB, NM 87117-5776.” ADD THIS ENTIRE DISTRIBUTION STATEMENT TO THE BOTTOM OF EVERY PAGE EXCEPT THE SF FORM 298.

9.2: Distribution authorized to U.S. Government agencies and their contractors; Critical Technology and Export Controlled; (date of determination). Other requests for this document shall be referred to AFRL/RVEP, 3550 Aberdeen Avenue, SE, Kirtland AFB, NM 87117-5776.” ADD THIS ENTIRE DISTRIBUTION STATEMENT TO THE BOTTOM OF EVERY PAGE EXCEPT THE SF FORM 298

9.3: WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec. 2751, et seq.) or the Export Administration Act of 1979, as amended. Title 50 U.S.C. App 2401 et seq. Violations of these export laws are subject to severe criminal penalties. Disseminate I.A.W. the provisions of the DoD Directive 5230.25. ADD “WARNING: EXPORT CONTROLLED” TO THE BOTTOM OF EVERY

PAGE OF BOTH VOLUMES OF THE REPORT EXCEPT THE SF FORM 298

9.4: DESTRUCTION NOTICE—For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document

Blks 10 - 13: The contractor shall deliver the Scientific and Technical Report, in final format, no later than the date specified in the Schedule. The USAF will review and, if necessary, return the final report with comments no later than the date specified in the Schedule. If the report is returned to the contractor with comments, the contractor shall deliver the camera-ready copy of the report no later than the date specified in the Schedule, with an Excel or Word document that has a disposition of all government comments and how they were addressed.

Blk 14: The contractor shall distribute the Scientific and Technical Report (final/CRC version(s)) in accordance with Blk 14. When the addressee’s copy is identified by “Ltr”, send only a copy of the transmittal letter to that addressee. NOTE: Headings in Block 14B, Copies, have been changed. “Draft” is changed to “Final” and “Final” (in second column) is changed to “CRC” (camera-ready copy).

G. PREPARED BY:

J C

Misty D. Crown I. APPROVED BY: Leah Ransom http://www.kirtland.af.mil/prs

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................: A

C. CATEGORY..............................:

D. SYSTEM/ITEM........: On-orbit Reprogrammable Digital Waveform Generator (ORDWG)

E. CONTRACT/PR NO.

F. CONTRACTOR.........:

1. DATA ITEM NO........................: A004

2. TITLE OF DATA ITEM............: Management Plan

3. SUBTITLE..................................: N/A

4. AUTHORITY.............................: DI-MGMT-80004A

5. CONTRACT REFERENCE......:

6. REQUIRING OFFICE..............: AFRL/RVEP

7. DD250 REQ................................: No

8. APP CODE.................................: A

9. DIST. STATEMENT REQUIRED......: See Block 16

10. FREQUENCY......................................: See Block 16

11. AS OF DATE........................................: See Block 16

ACO 0 Lt AFRL DET 8/RVKVE 0 Lt

Blk 9: All technical data containing unlimited rights data (including electronic media) shall be marked I.A.W. DoD Directive 5230.24 with Distribution Statement C.

STATEMENT TO THE BOTTOM OF EVERY PAGE.

5230.25.” ADD "WARNING: EXPORT CONTROLLED" TO THE BOTTOM OF EVERY PAGE.

Frequency and Submission Dates (Blocks 10, 12 & 13): The contractor shall deliver an updated Risk Assessment and Management Plan 5 business days prior to all program meetings and program reviews to include kick-off meeting, semi-annual review meetings, technical interchange meetings, and design reviews (PDR and CDR) conducted in conjunction with this effort.

Description: The Risk Assessment and Management Plan will be tailored for this program.

Format: Contractor Format is acceptable. MS Word shall be used for text documents, MS Excel shall be used for spreadsheet and graphic data, and MS PowerPoint shall be used for presentation material.

Submission via unencrypted or unsecure email is not permitted. Draft and final versions of materials shall be submitted via AMRDEC (https://safe.amrdec.army.mil/SAFE/).

17. PRICE GROUP: 18. ESTIMATED TOTAL PRICE :

G. PREPARED BY:

J C

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................: A

C. CATEGORY..............................:

D. SYSTEM/ITEM........: On-orbit Reprogrammable Digital Waveform Generator (ORDWG)

E. CONTRACT/PR NO.

F. CONTRACTOR.........:

1. DATA ITEM NO........................: A005

2. TITLE OF DATA ITEM............: Conceptual Design Drawing/Models

3. SUBTITLE..................................: N/A

4. AUTHORITY.............................: DI-SESS-81001E

5. CONTRACT REFERENCE......:

6. REQUIRING OFFICE..............: AFRL/RVEP

7. DD250 REQ................................: No

8. APP CODE.................................: A

9. DIST. STATEMENT REQUIRED......: See Block 16

10. FREQUENCY......................................: See Block 16

11. AS OF DATE........................................: See Block 16

ACO Lt Lt AFRL DET 8/RVKVE Lt Lt

Blk 4: Conceptual design drawings and models shall include any mathematical models and calculations used to predict the performance of the delivered item(s) under test. Inputs and outputs to the mathematical models and calculations shall be traceable to “breadboard”/EDU test inputs and outputs.

Blk 9: All technical data containing unlimited rights data (including electronic media) shall be marked I.A.W. DoD Directive 5230.24 with Distribution Statement C.

THE BOTTOM OF EVERY PAGE.

Frequency and Submission Dates (Blocks 10, 12 & 13): The contractor shall deliver draft Conceptual Design Drawings/Models 5 days prior to the Preliminary Design Review. A revised (final) version of Conceptual Design Drawings/Models shall be delivered within 10 days following the Preliminary Design Review. Submission via unencrypted or unsecure email is not permitted.

Description: The Conceptual Design Drawings/Models will be tailored for this program. The Conceptual Design Drawings/Models and associated lists shall be limited to providing only the detail necessary to identify discrete amplifier piece parts, their physical layout, electrical, thermal and mechanical interrelationships and all materials used in construction/assembly. Mathematical models will be tailored to this program. A mathematical model or models (herein referred to as the Behavioral Model) shall be submitted which predict the behavior of the delivered item over the range of expected performance. Behavioral models shall predict verification testing performance. In the case of digital component testing, behavioral models shall be capable of developing test vectors.

Format: Contractor Format is acceptable. MS Word shall be used for text documents, MS Excel shall be used for spreadsheet and graphic data, and MS PowerPoint shall be used for presentation material. Mathematical models and calculations shall be delivered in electronic form in editable, self-documented Microsoft Excel spreadsheets. The software models describing the ORDWG shall be delivered with source code and compiled libraries in Visual C++, and/or C, and/or C# and/or Matlab m files. Other formats may be negotiated with the Government on a case-by-case basis

Submission via unencrypted or unsecure email is not permitted. Draft and final versions of materials shall be submitted via AMRDEC (https://safe.amrdec.army.mil/SAFE/).

17. PRICE GROUP: 18. ESTIMATED TOTAL PRICE :

G. PREPARED BY:

J C

Misty D. Crown I. APPROVED BY: Leah Ronsom

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................: A

C. CATEGORY..............................:

D. SYSTEM/ITEM........: On-orbit Reprogrammable Digital Waveform Generator (ORDWG)

E. CONTRACT/PR NO.

F. CONTRACTOR.........:

1. DATA ITEM NO........................: A006

2. TITLE OF DATA ITEM............: Test Plan

3. SUBTITLE..................................: N/A

4. AUTHORITY.............................: DI-NDTI-80566A

5. CONTRACT REFERENCE......:

6. REQUIRING OFFICE..............: AFRL/RVEP

7. DD250 REQ................................: No

8. APP CODE.................................: A

9. DIST. STATEMENT REQUIRED......: See Block 16

10. FREQUENCY......................................: See Block 16

11. AS OF DATE........................................: See Block 16

ACO Lt Lt AFRL DET 8/RVKVE Lt Lt

Blk 4: Test Plan shall include predictions of values of all device responses/performance to be measured during testing. Any mathematical models and calculations used to predict the performance of the delivered item(s) under test shall be included in the plan and delivered.

Blk 9: All technical data containing unlimited rights data (including electronic media) shall be marked I.A.W. DoD Directive 5230.24 with Distribution Statement C.

THE BOTTOM OF EVERY PAGE.

Frequency and Submission Dates (Blocks 10, 12 & 13): The contractor shall deliver a draft Test Plan document 5 business days prior to the Critical Design Review (CDR). A revised (final) version of the Test Plan document shall be delivered within 10 business days following the Critical Design Review (CDR).

Description: The Test Plan will be tailored for this program. The Test Plan shall detail the procedures and equipment necessary to ensure the ORDWG meets or exceeds threshold and objective performance goals.

Format: Contractor Format is acceptable. MS Word shall be used for text documents, MS Excel shall be used for spreadsheet and graphic data, and MS PowerPoint shall be used for presentation material. Mathematical models and calculations shall be delivered in electronic form in editable, self-documented Microsoft Excel spreadsheets. The software model(s) describing the ORDWG shall be delivered with source code and compiled libraries in Visual C++, and/or C, and/or C# and/or Matlab m files. Other formats may be negotiated with the Government on a case-by-case basis.

Submission via unencrypted or unsecure email is not permitted. Draft and final versions of materials shall be submitted via AMRDEC (https://safe.amrdec.army.mil/SAFE/).

G. PREPARED BY:

J C

Misty D. Crown I. APPROVED BY: Leah Ranson H. DATE: 08 December 2014 J. DATE: 10 December 2014

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................: A

C. CATEGORY..............................:

D. SYSTEM/ITEM........: On-orbit Reprogrammable Digital Waveform Generator (ORDWG)

E. CONTRACT/PR NO.

F. CONTRACTOR.........:

1. DATA ITEM NO........................: A007

2. TITLE OF DATA ITEM............: Interface Requirements Specification

3. SUBTITLE..................................: N/A

4. AUTHORITY.............................: DI-IPSC-81434A

5. CONTRACT REFERENCE......:

6. REQUIRING OFFICE..............: AFRL/RVEP

7. DD250 REQ................................: No

8. APP CODE.................................: A

9. DIST. STATEMENT REQUIRED......: See Block 16

10. FREQUENCY......................................: See Block 16

11. AS OF DATE........................................: See Block 16

ACO Lt Lt AFRL DET 8/RVKVE Lt Lt

Blk 9: All technical data containing unlimited rights data (including electronic media) shall be marked I.A.W. DoD Directive 5230.24 with Distribution Statement C. The government will review all Limited Data Rights assertions in any document prior to the final determination of the appropriate statement.

THE BOTTOM OF EVERY PAGE.

Frequency and Submission Dates (Blocks 10, 12 & 13): The contractor shall deliver a draft Interface Requirements Specification document 5 business days prior to the Critical Design Review (CDR). A revised (final) version of the Interface Requirements Specification document shall be delivered within 10 business days following the Critical Design Review (CDR).

Description: The Interface Requirements Specification will be tailored for this program. The Interface Requirements Specification shall detail the hardware and software interface requirements necessary to integrate a fully flight qualified version of the ORDWG with the balance of the GPS navigation payload. The document shall also delineate any differences in interface requirements between the deliverable TRL 5+ engineering development unit (EDU) residual hardware ORDWG and a fully flight qualified ORDWG based upon the EDU design. An interface document describing the public and private interfaces of the software model(s) shall be delivered.

Format: Contractor Format is acceptable. MS Word shall be used for text documents, MS Excel shall be used for spreadsheet and graphic data, and MS PowerPoint shall be used for presentation material.

Submission via unencrypted or unsecure email is not permitted. Draft and final versions of materials shall be submitted via AMRDEC (https://safe.amrdec.army.mil/SAFE/).

G. PREPARED BY:

J C

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................: A

C. CATEGORY..............................:

D. SYSTEM/ITEM........: On-orbit Reprogrammable Digital Waveform Generator (ORDWG)

E. CONTRACT/PR NO.

F. CONTRACTOR.........:

1. DATA ITEM NO........................: A008

2. TITLE OF DATA ITEM............: Report, Record of Meeting/Minutes

3. SUBTITLE..................................: N/A

4. AUTHORITY.............................: DI-ADMN-81505

5. CONTRACT REFERENCE......:

6. REQUIRING OFFICE..............: AFRL/RVEP

7. DD250 REQ................................: No

8. APP CODE.................................: A

9. DIST. STATEMENT REQUIRED......: See Block 16

10. FREQUENCY......................................: See Block 16

11. AS OF DATE........................................: See Block 16

AFRL/RVEP 0 1

ACO 0 Lt AFRL DET 8/RVKVE 0 Lt

SMC/GP 0 1

SMC/XR 0 1

15. TOTAL: 0 3

STATEMENT TO THE BOTTOM OF EVERY PAGE.

5230.25.” ADD "WARNING: EXPORT CONTROLLED" TO THE BOTTOM OF EVERY PAGE.

Frequency and Submission Dates (Blocks 10, 12 & 13): The contractor shall deliver the Report, Record of Meeting/Minutes, no later than 10 business day following the conclusion of all program meetings and program reviews to include the kick-off meeting, semi-annual review meetings, technical interchange meetings, and design reviews (PDR and CDR) conducted in conjunction with this effort.

Description: Report, Record of Meeting/Minutes will be tailored for this program. It will include a list of meeting participants, a list of action items resulting from the meeting, the assigned OPR for each action item with suspense dates, and notes pertinent to each action item.

Format: Contractor Format is acceptable. MS Word shall be used for text documents, MS Excel shall be used for spreadsheet and graphic data, and MS PowerPoint shall be used for presentation material.

Submission via unencrypted or unsecure email is not permitted. Draft and final versions of materials shall be submitted via AMRDEC (https://safe.amrdec.army.mil/SAFE/).

17. PRICE GROUP: 18. ESTIMATED TOTAL PRICE :

G. PREPARED BY:

J C

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................: A

C. CATEGORY..............................:

D. SYSTEM/ITEM........: On-orbit Reprogrammable Digital Waveform Generator (ORDWG)

E. CONTRACT/PR NO.

F. CONTRACTOR.........:

1. DATA ITEM NO........................: A009

2. TITLE OF DATA ITEM............: Computer Software Product End Items

3. SUBTITLE..................................: N/A

4. AUTHORITY.............................: DI-MCCR-80700

5. CONTRACT REFERENCE......:

6. REQUIRING OFFICE..............: AFRL/RVEP

7. DD250 REQ................................: Lt

8. APP CODE.................................: N/A

9. DIST. STATEMENT REQUIRED......: See Block 16

10. FREQUENCY......................................: See Block 16

11. AS OF DATE........................................: See Block 16

SMC/GP 1 1

SMC/XR 1 1

ACO Lt Lt AFRL DET 8/RVKVE Lt Lt

EVERY PAGE.

EXPORT CONTROLLED" TO THE BOTTOM OF EVERY PAGE.

Frequency and Submission Dates (Blocks 10, 12 & 13): The contractor shall deliver draft (beta) Computer Software Product End Items at the conclusion of the technical effort.

A revised (final) version of Computer Software Product End Items shall be delivered with the camera ready copy of the Final Report (A003).

Description: The Computer Software Product End Items will be tailored for this program. All software required to operate the Engineering Design Unit (EDU) hardware along with associated documentation shall be provided. All software tools used to develop, test and analyze the ORDWG should be delivered along with documentation on how to operate. All software models source code and compiled libraries describing the ORDWG along with operating instructions shall delivered. Both source code and an executable file(s) shall be provided on CD-ROM disk(s). The source code shall be compatible with compilers compatible with standard Windows 7 government desktop computers.

Format: Contractor Format is acceptable (software source code must be compatible with compiler specified above). MS Word shall be used for text documents, MS Excel shall be used for spreadsheet and graphic data, and MS PowerPoint shall be used for presentation material.

Submission via unencrypted or unsecure email is not permitted. Draft and final versions of materials shall be submitted via AMRDEC (https://safe.amrdec.army.mil/SAFE/).

G. PREPARED BY:

J C

File details come from the government source that posted it. Updated Nov 14, 2017.