WSSP Amendment 04 Final.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICAITON NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicble)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICIATION NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a)By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPIRATION DATA (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc. ) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION ( Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

NSN 7540-01-152-8070

Previous edition unusable

WSSP BAA0002-19, dated August 28, 2019, is hereby Amended as follows:

1. Intellectual Property and Data Rights Clauses are hereby Incorporated by Reference and added to BAA0002-19.

Intellectual Property and Data Rights Clauses

Clause Title Date 52.227-3 Patent Indemnity APR 1984 252.227-7013 Rights in Technical Data – Other Than Commercial

Products and Commercial Services

MAR 2023

252.227-7014 Rights in Other Than Commercial Computer Software and Other Than Commercial Computer Software Documentation

MAR 2023

252.227-7016 Rights in Bid or Proposal Information JAN 2023 252.227-7019 Validation of Asserted Restrictions – Computer Software JAN 2023 252.227-7025 Limitations on the Use or Disclosure of Government-

Furnished Information Marked with Restrictive Legends

JAN 2023

252.227-7026 Deferred Delivery of Technical Data or Computer Software

APR 1988

252.227-7027 Deferred Ordering of Technical Data or Computer Software

APR 1988

252.227-7028 Technical Data or Computer Software Previously Delivered to the Government

JUN 1995

252.227-7030 Technical Data—Withholding of Payment Mar 2000 252.227-7037 Validation of Restrictive Markings on Technical Data JAN 2023 252.227-7039 Patents—Reporting of Subject Inventions APR 1990

2. B.12 Intellectual Property and Data Rights for Resultant Awardees is hereby added to BAA0002-19.

Intellectual Property and Data Rights for Resultant Awardees

Pursuant to DFARS 252.227-7013 Rights in Technical Data—Other Than Commercial Products and Commercial Services and DFARS 252.227-7014 Rights in Other Than Commercial Computer Software and Other Than Commercial Computer Software Documentation, the Government will identify which rights (Unlimited, Government Purpose, or Restricted) they shall receive at the time of award.

3. Identification and Assertion of Use, Release, or Disclosure Restrictions is hereby added to BAA0002-19.

Identification and Assertion of Use, Release, or Disclosure Restrictions

Along with the White Paper submission, the offeror shall identify any restrictions to technical data or computer software in accordance with the following provision:

DFARS 252.227-7017 Identification and Assertion of Use, Release, or Disclosure Restrictions (Jan 2023).

(a) The terms used in this provision are defined in following clause or clauses contained in this solicitation—

(1) If a successful offeror will be required to deliver technical data, the Rights in Technical Data—Other Than Commercial Products and Commercial Services clause, or, if this solicitation contemplates a contract under the Small Business Innovation Research Program, the Rights in Other Than Commercial Technical Data and Computer Software—Small Business Innovation Research (SBIR) Program clause.

(2) If a successful offeror will not be required to deliver technical data, the Rights in Other Than Commercial Computer Software and Other Than Commercial Computer Software Documentation clause, or, if this solicitation contemplates a contract under the Small Business Innovation Research Program, the Rights in Other Than Commercial Technical Data and Computer Software—Small Business Innovation Research (SBIR) Program clause.

(b) The identification and assertion requirements in this provision apply only to technical data, including computer software documentation, or computer software to be delivered with other than unlimited rights. For contracts to be awarded under the Small Business Innovation Research Program, the notification and identification requirements do not apply to technical data or computer software that will be generated under the resulting contract. Notification and identification is not required for restrictions based solely on copyright.

(c) Offers submitted in response to this solicitation shall identify, to the extent known at the time an offer is submitted to the Government, the technical data or computer software that the Offeror, its subcontractors or suppliers, or potential subcontractors or suppliers, assert should be furnished to the Government with restrictions on use, release, or disclosure.

(d) The Offeror's assertions, including the assertions of its subcontractors or suppliers or potential subcontractors or suppliers, shall be submitted as an attachment to its offer in the following format, dated and signed by an official authorized to contractually obligate the Offeror:

Identification and Assertion of Restrictions on the Government's Use, Release, or Disclosure of Technical Data or Computer Software.

The Offeror asserts for itself, or the persons identified below, that the Government's rights to use, release, or disclose the following technical data or computer software should be restricted:

Technical Data or

Computer Software Name of Person to be Furnished Basis for Asserted Rights Asserting

With Restrictions* Assertion** Category*** Restrictions****

(LIST)***** (LIST) (LIST) (LIST)

*For technical data (other than computer software documentation) pertaining to items, components, or processes developed at private expense, identify both the deliverable technical data and each such item, component, or process. For computer software or computer software documentation identify the software or documentation.

**Generally, development at private expense, either exclusively or partially, is the only basis for asserting restrictions. For technical data, other than computer software documentation, development refers to development of the item, component, or process to which the data pertain.

The Government's rights in computer software documentation generally may not be restricted. For computer software, development refers to the software. Indicate whether development was accomplished exclusively or partially at private expense. If development was not accomplished at private expense, or for computer software documentation, enter the specific basis for asserting restrictions.

***Enter asserted rights category (e.g., government purpose license rights from a prior contract, rights in SBIR data generated under another contract, limited, restricted, or government purpose rights under this or a prior contract, or specially negotiated licenses).

****Corporation, individual, or other person, as appropriate.

*****Enter “none” when all data or software will be submitted without restrictions.

Date _________________________________

Printed Name and Title _________________________________

Signature _________________________________

(End of identification and assertion)

(e) An offeror's failure to submit, complete, or sign the notification and identification required by paragraph (d) of this provision with its offer may render the offer ineligible for award.

(f) If the Offeror is awarded a contract, the assertions identified in paragraph (d) of this provision shall be listed in an attachment to that contract. Upon request by the Contracting Officer, the Offeror shall provide sufficient information to enable the Contracting Officer to evaluate any listed assertion.

(End of provision)

4. Government Furnished Property Instructions are hereby incorporated into

BAA0001-22.

Government Furnished Property Instructions

i. The Government does not anticipate that government furnished property (GFP) will be required for all areas of interest. In the event GFP is required, the Contracting Officer will incorporate the GFP and GFP attachment in accordance with DFARS PGI 245.103-72 at award.

5. DFARS 252.245-7005 Management and Reporting of Government Property. (JAN 2024) is hereby added to B.14 Government Furnished Property Instructions of

BAA0001-22.

ii. DFARS 252.245-7005 Management and Reporting of Government Property. (JAN 2024)

(a) Definitions. As used in this clause—

As is means that the Government makes no warranty with respect to the serviceability and/or suitability of the Government property for contract performance and that the Government will not pay for any repairs, replacement, and/or refurbishment of the property.

Commercial and Government Entity (CAGE) code means—

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity by unique location; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

Contractor-acquired property, contractor inventory, Government property, Government-furnished property, and loss of Government property have the meanings given in the Federal Acquisition Regulation (FAR) 52.245–1, Government Property, clause of this contract.

Demilitarization means the act of eliminating the functional capabilities and inherent military design features from DoD personal property. Methods and degree range from removal and destruction of critical features to total destruction by cutting, tearing, crushing, mangling, shredding, melting, burning, etc.

Export-controlled items has the meaning given in the Defense Federal Acquisition Regulation Supplement (DFARS) 252.225–7048, Export-Controlled Items, clause of this contract.

Ineligible transferee means an individual, an entity, or a country—

(1) Excluded from Federal programs by the General Services Administration as identified in the System for Award Management Exclusions located at https://sam.gov;

(2) Delinquent on obligations to the U.S. Government under surplus sales contracts;

(3) Designated by the Department of Defense as ineligible, debarred, or suspended from defense contracts; or

(4) Subject to denial, debarment, or other sanctions under export control laws and related laws and regulations, and orders administered by the Department of State, the Department of Commerce, the Department of Homeland Security, or the Department of the Treasury.

Item unique identification means a system of assigning, reporting, and marking DoD property with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items.

National stock number means a 13-digit stock number used to identify items of supply. It consists of a four-digit Federal Supply Code and a nine-digit National Item Identification Number.

Reparable item means an item, typically in unserviceable condition, furnished to the contractor for maintenance, repair, modification, or overhaul.

Scrap means property that has no value except for its basic material content. For purposes of demilitarization, scrap is defined as recyclable waste and discarded materials derived from items that have been rendered useless beyond repair, rehabilitation, or restoration such that the item's original identity, utility, form, fit, and function have been destroyed. Items can be classified as scrap if processed by cutting, tearing, crushing, mangling, shredding, or melting. Intact or recognizable components and parts are not “scrap.”

Serially-managed item means an item designated by DoD to be uniquely tracked, controlled, or managed in maintenance, repair, and/or supply systems by means of its serial number or unique item identifier.

Serviceable or usable property means property with potential for reutilization or sale as is or with minor repairs or alterations.

Supply condition code means a classification of materiel in terms of readiness for issue and use or to identify action underway to change the status of materiel.

Unique item identifier (UII) means a set of data elements marked on an item that is globally unique and unambiguous. The term includes a concatenated UII or a DoD recognized unique identification equivalent.

(b) Reporting Government property. (1) The Contractor shall use the Government Furnished Property (GFP) module of the Procurement Integrated Enterprise Environment (PIEE) to—

(i) Report receipt of GFP;

(ii) Report the transfer of GFP to another DoD contract;

(iii) Report the shipment of GFP to the Government or to a contractor. The GFP module generates the electronic equivalent of the DD Form 1149, DD Form 1348–1, or other required shipping documents;

(iv) Report when serially-managed items of GFP are incorporated into a higher-level component, assembly, or end item;

(v) Report the loss of Government property in accordance with paragraph (f)(1)(vii) of the FAR 52.245–1 clause of this contract;

(vi) Complete the plant clearance inventory schedule in accordance with paragraph (j)(2) of the FAR 52.245–1 clause of this contract, unless disposition instructions are otherwise included in this contract. The GFP module generates the electronic equivalent of the Standard Form (SF) 1428, Inventory Disposal Schedule; and

(vii) Submit a request to buy back or to convert to GFP items of Contractor-acquired property.

(2) Information regarding the GFP module is available in the GFP Module Vendor Guide at https://dodprocurementtoolbox.com/site-pages/gfp-resources. Users may also register for access to the GFP module and obtain training on the PIEE home page at https://piee.eb.mil.

(3) In complying with paragraphs (b)(1)(i) through (iv) of this clause, the Contractor shall report the updated status of the property to the GFP module within 7 business days of the date the change in status occurs, unless otherwise specified in the contract.

(4) The Contractor shall use Wide Area WorkFlow in accordance with DFARS Appendix F, Material Inspection and Receiving Report, to report the shipment of reparable items after completion of repair, maintenance, modification, or overhaul.

(5) When Government property is in the possession of subcontractors, the Contractor shall ensure that reporting is accomplished using the data elements required in paragraph (c) of this clause.

(c) Records of Government property. To facilitate reporting of Government property to the GFP module, the Contractor's property records, in addition to the requirements of paragraph (f)(1)(iii) of the FAR 52.245–1 clause of this contract, shall enable recording of the following data elements:

(1) National stock number (NSN). If an NSN is not available, use either the combination of the manufacturer's CAGE code and part number, or model number.

(2) CAGE code on the accountable Government contract.

(3) Received/sent (shipped) date.

(4) Accountable Government contract number.

(5) Serial number (for serially-managed items that do not have a UII); and

(6) Supply condition code (only required for reporting of reparable items). For information on Federal supply condition codes, see DLM 4000.25, Defense Logistics Management Standards (DLMS), Volume 2, Supply Standards and Procedures, Appendix 2.5 at https://www.dla.mil/HQ/ InformationOperations/DLMS/elibrary/manuals/v2/.

(d) Marking, reporting, and UII registration of GFP requirements. The Contractor—

(1) Shall assign the UII and mark the reparable items identified as serially managed in the GFP attachment to this contract with an item unique identification (IUID) data matrix, when the technical drawing for the item is accessible to the Contractor and includes IUID data matrix location and marking method;

(2) Shall report the UII either before or during shipment of the repaired item;

(3) Is not required to mark items that were previously marked with an IUID data matrix and registered in accordance with DFARS 252.211–7003, Item Unique Identification and Valuation;

and

(4) Shall assign a new UII, then mark and register the item, when the conditions of paragraph (d)(1) are met, if an item is found to be marked but not registered in the IUID Registry.

(e) Disposing of Government property. (1) The Contractor shall complete the plant clearance inventory schedule using the plant clearance capability of the GFP module of the PIEE to generate an electronic equivalent of the SF 1428, Inventory Disposal Schedule. The plant clearance inventory schedule requires the following:

(i) If known, the applicable Federal supply code (FSC) for all items, except items in scrap condition.

(ii) If known, the manufacturer name for all aircraft components under Federal supply group 16 or 17 and FSCs 2620, 2810, 2915, 2925, 2935, 2945, 2995, 4920, 5821, 5826, 5841, 6340, and 6615.

(iii) The manufacturer name, make, model number, model year, and serial number for all aircraft under FSCs 1510 and 1520.

(2) If the schedules are acceptable, the plant clearance officer will confirm acceptance in the GFP module plant clearance capability, which will transmit a notification to the Contractor. The electronic acceptance is equivalent to the DD Form 1637, Notice of Acceptance of Inventory.

(f) Demilitarization, mutilation, and destruction. If demilitarization, mutilation, or destruction of contractor inventory is required, the Contractor shall demilitarize, mutilate, or destroy contractor inventory, in accordance with the terms and conditions of the contract and consistent with Defense Demilitarization Manual, DoD Manual (DoDM) 4160.28–M, edition in effect as of the date of this contract. If the property is available for purchase, the plant clearance officer may authorize the purchaser to demilitarize, mutilate, or destroy as a condition of sale provided the property is not inherently dangerous to public health and safety.

(g) Classified Contractor inventory. The Contractor shall dispose of classified contractor inventory in accordance with applicable security guides and regulations or as directed by the Contracting Officer.

(h) Inherently dangerous Contractor inventory. Contractor inventory that is dangerous to public health or safety shall not be disposed of unless rendered innocuous or until adequate safeguards are provided.

(i) Contractor inventory located in foreign countries. Consistent with contract terms and conditions, property disposition shall be in accordance with foreign and U.S. laws and regulations, including laws and regulations involving export controls, host nation requirements, final governing standards, and government-to-government agreements. The Contractor's responsibility to comply with all applicable laws and regulations regarding export-controlled items exists independent of, and is not established or limited by, the information provided by this clause.

(j) Disposal of scrap— (1) Contractor scrap procedures. (i) The Contractor shall include, within its property management procedure, a process for the accountability and management of Government-owned scrap. The process shall, at a minimum, provide for the effective and efficient disposition of scrap, including sales to scrap dealers, so as to minimize costs, maximize sales proceeds, and contain the necessary internal controls for mitigating the improper release of non-scrap property.

(ii) The Contractor may commingle Government and contractor-owned scrap and provide routine disposal of scrap, with plant clearance officer concurrence, when determined to be effective and efficient.

(2) Scrap warranty. The plant clearance officer may require the Contractor to secure from scrap buyers a DD Form 1639, Scrap Warranty.

(k) Sale of surplus Contractor inventory— (1) Sales procedures. (i) The Contractor shall conduct sales of contractor inventory (both useable property and scrap) in accordance with the requirements of this contract and plant clearance officer direction. The Contractor shall include in its invitation for bids the sales terms and conditions provided by the plant clearance officer.

(ii) The Contractor may conduct internet-based sales, to include use of a third party.

(iii) If the Contractor wishes to bid on the sale, the Contractor or its employees shall submit bids to the plant clearance officer prior to soliciting bids from other prospective bidders.

(iv) The Contractor shall solicit bids to obtain adequate competition. Negotiated sales are subject to obtaining such competition as is feasible under the circumstances of the negotiated sale.

(v) The Contractor shall solicit bids at least 15 calendar days before bid opening to allow adequate opportunity to inspect the property and prepare bids.

(vi) For large sales, the Contractor may use summary lists of items offered as bid sheets with detailed descriptions attached.

(vii) In addition to providing notice of the proposed sale to prospective bidders, the Contractor may, when the results are expected to justify the additional expense, display a notice of the proposed sale in appropriate public places, e.g., publish a sales notice on the internet, in appropriate trade journals or magazines, and in local newspapers.

(viii) The plant clearance officer or designated Government representative will witness the bid opening. The Contractor shall submit the bid abstract in electronic format to the plant clearance officer within 2 days of bid opening. If the Contractor is unable to submit the bid abstract electronically, the Contractor may submit 2 copies of the abstract manually within 2 days of bid opening. The plant clearance officer will not approve award to any bidder who is an ineligible transferee.

(2) Required terms and conditions for sales contracts. The Contractor shall include the following terms and conditions in sales contracts:

(i) For sales contracts or other documents transferring title:

“The Purchaser certifies that the property covered by this contract will be used in [insert name of country]. In the event of resale or export by the Purchaser of any of the property, the Purchaser agrees to obtain the appropriate U.S. and foreign export or re-export license approval.”

(ii) For sales contracts that require demilitarization, mutilation, or destruction of property:

“The following items [insert list provided by plant clearance officer] require demilitarization, mutilation, or destruction by the Purchaser. Additional instructions are provided in accordance with Defense Demilitarization Manual, DoDM 4160.28–M, edition in effect as of the date of this sales contract. A Government representative will certify and verify demilitarization of items.

Prepare demilitarization certificates in accordance with DoDM 4160.28, Volume 2, section 4.5, DEMIL Certificate (see figure 2, Example DEMIL Certificate).”

(iii) Removal and title transfer:

“Property requiring demilitarization shall not be removed, and title shall not pass to the Purchaser, until demilitarization has been accomplished and verified by a Government representative.”

(iv) Assumption of cost incident to demilitarization:

“The Purchaser agrees to assume all costs incident to the demilitarization and to restore the working area to its present condition after removing the demilitarized property.”

(v) Failure to demilitarize:

“If the Purchaser fails to demilitarize, mutilate, or destroy the property as specified in the sales contract, the Contractor may, upon giving 10 days written notice to the Purchaser—

(A) Repossess, demilitarize, and return the property to the Purchaser, in which case the Purchaser hereby agrees to pay to the Contractor, prior to the return of the property, all costs incurred by the Contractor in repossessing, demilitarizing, and returning the property;

(B) Repossess, demilitarize, and resell the property, and charge the defaulting Purchaser with all costs incurred by the Contractor. The Contractor shall deduct these costs from the purchase price and refund the balance of the purchase price, if any, to the Purchaser. In the event the costs exceed the purchase price, the defaulting Purchaser hereby agrees to pay these costs to the Contractor; or

(C) Repossess and resell the property under similar terms and conditions, and charge the defaulting Purchaser with all costs incurred by the Contractor. The Contractor shall deduct these costs from the original purchase price and refund the balance of the purchase price, if any, to the defaulting Purchaser. Should the excess costs to the Contractor exceed the purchase price, the defaulting Purchaser hereby agrees to pay these costs to the Contractor.”

(l) Restrictions on purchase or retention of Contractor inventory. The Contractor may not knowingly sell the inventory to any person or that person's agent, employee, or household member if that person—

(1) Is a civilian employee of DoD or the U.S. Coast Guard;

(2) Is a member of the Armed Forces of the United States, including the U.S. Coast Guard; or

(3) Has any functional or supervisory responsibilities for or within DoD's property disposal, disposition, or plant clearance programs or for the disposal of contractor inventory.

(m) Proceeds from sales of surplus property. Unless otherwise provided in the contract, the proceeds of any sale, purchase, or retention shall be—

(1) Forwarded to the Contracting Officer;

(2) Credited to the Government as part of the settlement agreement pursuant to the termination of the contract;

(3) Credited to the price or cost of the contract; or

(4) Applied as otherwise directed by the Contracting Officer.

(End of clause)

6. All other Terms and Conditions remain unchanged.

700 Robbins Ave.

Philadelphia, PA 19111 Attn: R&D CONTRACTING TEAM

As a result of this amendment, BAA 0002-19 is hereby revised. All offerors shall refer to the most recent version of the BAA and subsequent amendments, when preparing white papers and proposals for submission. All other provisions of the BAA remain unchanged.

See Continuation Pages.