B08_Attachment_3_Product_Cut_Sheets.pdf

REHABILITATE CLIMBING FACILITIES AT CAMP MUIR

TITLE II DESIGN DEVELOPMENT AND CONSTRUCTION DOCUMENTS SERVICES

MOUNT RAINIER NATIONAL PARK, PIERCE COUNTY, WASHINGTON

100% CONSTRUCTION DOCUMENTS - PRODUCT CUT-SHEETS

140P8525F0011

PMIS # 307228

DECEMBER 03, 2025

*All materials for this requirement are "Brand Name or Equal". The contents provided in this attachment are recommended by the designer of record, but not required. Product used shall meet/exceed what is stated in the specifications.

100% CONSTRUCTION DOCUMENTS - PRODUCT CUT-SHEETS

ECI 12.03.2025 140P8525F0011

ECI 12.03.2025 140P8525F0011

TABLE OF CONTENTS / PRODUCT CUT-SHEET INDEX

1.01 DIVISION 04 – MASONRY

A. 044313 - Gabion Cladding

1.02 DIVISION 05 -- METALS

A. 054000 – Cold Formed Metal Framing (Slotted Strut System)

1.03 DIVISION 06 -- WOOD, PLASTICS, AND COMPOSITES

A. 061529 - Nail-Laminated Timber (NLT)

B. 062000 – Interior Ceiling Mounted Hook

1.04 DIVISION 07 -- THERMAL AND MOISTURE PROTECTION

A. 072700 - Weather Barrier System

B. 075300 - Roof Assembly – EPDM Membrane and Walking Pads

1.05 DIVISION 08 -- OPENINGS

A. 085113 - Aluminum Windows

B. 087100 – Hardware

C. 089100 – Louvers – Wall and Floor

1.06 DIVISION 10 – SPECIALTIES

A. 101423 – Panel Signage

B. 104000 – Safety Specialties – Fire Extinguishers

1.07 DIVISION 11 – EQUIPMENT

A. 114000 – Food Service Equipment – Stainless Steel Wall Panel & Stainless Steel Worktable

1.08 DIVISION 26 -- ELECTRICAL

A. Smoke Alarm & CO Detector

ECI 12.03.2025 140P8525F0011

DURA-WALL gabion wall veneer is an architectural concept consisting of narrow width (6"

- 12") welded wire mesh gabion baskets securely anchored to a structural wall then �lled in place with rocks... resulting in a durable natural stone face veneer.

Constructed of heavy gauge ( 9 or 6 ga) galvanized steel wire mesh, the veneer can be applied almost any time of the year without the use of heavy equipment or skilled labor to �ll the gabions ... and a life expectancy of over 75 years.

Gabion stone veneers sometimes called gabion cladding is becoming more and more popular. Used in both interior and exterior applications it is easy to add a natural stone aesthetic mixed with the modern look of the surrounding gabion cage. While it still takes a little physical labor to install a gabion veneer, you don’t have to be an artisan to end up with a great looking �nished product.

Should you hire a contractor to install a gabion stone veneer?

Higher Quality of Work Contractors are generally experienced and have an eye for placing the stone. While a gabion veneer system makes it easier to install for a DIYer it also makes it easier for a contractor to install a stone veneer system. Their expertise really comes into play when

(https://gabionsupply.com/wp-content/uploads/2018/12/Dura-WallVeener4.jpg)

Sign-up now for updates and information! ▲ deciding on a tie back or support system for the gabion veneer facing.

Saves You Time and Labor While gabion veneers do not require as much artisan expertise as a natural stacked stone veneer with grout they do still require moving large quantities of stone so you should de�nitely take this in to account when deciding what value to place on hiring a contractor to install the products.

Saves You Money As mentioned above, you are moving a large volume of stone. A contractor is more likely to have the expertise not to make a mistake during the install whether it is the basket system, tie back system or stone �ll. Any mistakes made causing you to redo your work is compounded by the volume of stone as you get further into the install.

Having gone over the advantages of hiring a contractor to install you gabion veneer or cladding project it is de�nitely doable for a capable DIYer and we are always here to help.

When Should You Install a Gabion Stone Veneer?

Gabion stone veneers can be installed in most weather as you don’t have to worry about the moisture level in grout like a traditional stone veneer. The gabions baskets are placed and then the stone is just stacked inside the gabion basket as part of the cladding system. And of course the weather doesn’t matter when you are installing a gabion veneer in the interior of a house.

Transform Any Space With Dura-Wall Natural Stone Veneers

Features and Benefits Dura-Wall veneers deliver exceptional value through versatile design capabilities and durable construction. The system incorporates premium natural stone veneer materials that weather naturally while maintaining structural integrity. We engineer each component to work seamlessly together, creating stone veneer wall systems that stand the test of time.

As a long-lasting material choice, our retaining wall veneer solutions require minimal maintenance while providing maximum visual impact for your investment. Our proven installation methods ensure consistent results across projects of any scale.

The system offers several key advantages:

Natural sound absorption properties: Dura-Wall veneer is an excellent choice for properties near busy streets or highways. The layered stone construction helps reduce noise levels, creating a more peaceful environment.

Weather-resistant engineering: Your wall maintains its appearance and structural integrity through years of exposure to the elements.

Customizable aesthetic: Match existing architecture or create striking standalone designs. Multiple stone sizes and variations can achieve your desired look, making each decorative stone veneer wall unique to your property.

Applications and Use Cases Dura-Wall veneer systems excel in various applications across residential and commercial projects:

Perimeter walls: Estates and commercial properties bene�t from the system's combination of security and visual appeal. Our natural stone veneer �nish creates an upscale appearance while providing essential boundary de�nition and protection.

Landscape retaining walls: Incorporate multiple tiers and curves, allowing for creative garden designs and effective erosion control. Our veneer solutions adapt to various terrain challenges while enhancing your property's natural beauty.

Sound barrier installations: Provide effective noise reduction near highways or industrial areas while avoiding the institutional appearance of standard concrete barriers. These retaining wall veneer solutions offer functionality and aesthetic appeal.

Endless possibilities: Create an elegant courtyard entrance, decorate a wine bar, establish secure property boundaries, or enhance upscale commercial developments.

Why Choose Dura-Wall by Gabion Supply?

We set ourselves apart through our commitment to quality and comprehensive support.

Our expertise in stone veneer wall systems ensures you receive the guidance needed for successful project completion. The Dura-Wall system represents years of development and re�nement based on real-world applications and customer satisfaction.

Take the Next Step Contact our team today to discuss your retaining wall project needs. We provide detailed consultations to help determine the best con�guration for your speci�c requirements.

Our experts can guide you through material selection and installation planning to ensure optimal results for your exterior project.

If you would like any additional information on Gabion Supply’s Dura-Wall Stone Veneer system, give us a call today! 866-391-6295.

EXAMPLES OF DURA-WALL PROJECTS

EXAMPLES OF DURA-WALL INTERIOR VENEER WALLS

(https://gabionsupply.com/ wp-content/uploads/2018/12/ Dura-WallVeener5.jpg)

(https://gabionsupply.com/ wp-content/uploads/2018/12/ Dura-WallVeener6.jpg)

(https://gabionsupply.com/ wp-content/uploads/2018/12/ Dura-WallVeener10.jpg)

(https://gabionsupply.com/wp-content/uploads/2018/12/Dura-WallVeener7.jpg) (https://gabionsupply.com/wp-content/uploads/2018/12/Dura-WallVeener8.jpg) (https://gabionsupply.com/wp-content/uploads/2018/12/Dura-WallVeener9.jpg)

TYPICAL ANCHORING DETAILS

STONE FACE WITH FILL MATERIAL

(https://gabionsupply.com/wp-content/uploads/2018/12/Dura-WallVeener11.jpg)

(https://gabionsupply.com/wp-content/uploads/2018/12/Dura-WallVeener14.jpg)

(https://gabionsupply.com/wp-content/uploads/2018/12/Dura-WallVeener12.jpg)

(https://gabionsupply.com/wp-content/uploads/2018/12/Dura-WallVeener15.jpg)

(https://gabionsupply.com/wp-content/uploads/2018/12/Dura-WallVeener13.png)

(https://gabionsupply.com/wp-content/uploads/2018/12/Dura-WallVeener16.jpg)

(https://gabionsupply.com/wp-content/uploads/2018/12/Dura-WallVeener17.jpg) (https://gabionsupply.com/wp-content/uploads/2018/12/Dura-WallVeener18.jpg) (https://gabionsupply.com/wp-content/uploads/2018/12/Dura-WallVeener19.jpg)

4 1/8” to 19 1/2”

10’X40’ 8’X64’

Credit: AWC’S TR10

Mass Timber’s Fire

Credit: AWC’S NDS

6” Thick 7/8” Thick

• 1.5” to 4” thick

RONSTAN

Heavy Duty Pad Eye - Round Base - 4 X M6 (1/14") Holes SKU: 378627 Item ID: RON RF2429-06

Stainless Steel

Your Price:

$71.58 / each

Availability:

5 In Stock Ships immediately

Description

The Ronstan Heavy Duty Pad Eye - Round Base is a robust marine hardware component designed for demanding nautical applications.

Constructed from high-grade 316 stainless steel for superior corrosion resistance in marine environments.

Features a round base design that provides maximum surface area contact for secure mounting and load distribution.

Round base allows for versatile mounting on flat surfaces, providing multiple attachment points and load-bearing capabilities.

Engineered for heavy-duty applications, suitable for rigging, sailing, marine construction, and industrial marine uses.

Precision-machined to ensure structural integrity and consistent performance under high-stress conditions.

Polished and passivated finish enhances both aesthetic appeal and long-term corrosion protection.

Designed to withstand significant working loads while maintaining structural reliability in challenging maritime conditions.

Compatible with various fastening methods, including through-bolting and welding, depending on specific application requirements.

Ideal for use on boats, marine structures, industrial equipment, and other applications requiring a strong, reliable attachment point.

Meets or exceeds marine industry standards for material quality and performance.

Specifications

MFG #: RF2429-06 | Holes 4 X M6 (1/14")

B 5/16"

BL 8800 lb

D 2"

12/2/25, 1:16 PM Ronstan RF2429-06 | Fisheries Supply https://www.fisheriessupply.com/ronstan-heavy-duty-pad-eye-round-base/rf2429-06?srsltid=AfmBOorYQ0nT3dyAW59iVUxATX823zLuFLNKwZN_Ep0… 1/3

Camp Muir Ceiling Mounted Hook https://www.fisheriessupply.com/ronstan

JM EPDM R 75 mil Polyester-Reinforced

Ethylene Propylene Diene Monomer Membrane

Installation/Application

Mechanically Fastened

AdheredBallasted

Refer to JM EPDM Application Guides and Detail Drawings for instructions.

Packaging and Dimensions

Roll Size 10' x 100' (3.05 m x 30.48 m)

Roll Coverage 1000 ft² (92.66 m²)

Extruded In: Milan, OH

Meets the requirements of ASTM D 4637, Type II

Features and Components

Membrane: Cured EPDM (ethylene propylene diene monomer) reinforced with a tough 1,000+ denier polyester mat. Excellent puncture and hail resistance.

Fully Extruded: Produces fewer air voids, more uniform thickness and smoother sheets.

Vulcanization Process: Combines two layers of membrane to produce a fully cross-linked monolithic membrane.

Polymer Formulation: Performs in extreme temperature climates and withstands differential movement (elongation).

UV-Stabilization Properties: Offers outstanding ozone and weather resistance delivering one of the longest service lives available.

Technical Expertise: Backed by 30+ years of EPDM experience and installations.

Energy and the Environment

Property Value

Reflectivity* (ASTM C 1549) 0.06

Emissivity* (ASTM C 1371) 0.88

Post-consumer Recycled Content 0%

Pre-Consumer Recycled Content 0%

*Test methods for reflectivity and emissivity are LEED®- and CRRC®-approved.

Peak Advantage® Guarantee Information Enhanced guarantees are now available on certain systems for wind and puncture.

Consult your local sales representative for more information and for specific guarantee terms and costs.

Product Guarantee Term

When used in most JM EPDM Systems* Up to 25 years

*Contact JM Technical Services for specific systems.

Codes and Approvals

Component

M Membrane

Single Ply

System Compatibility This product may be used as a component in the following systems. Please reference product application for specific installation methods and information.

M ul ti -P ly BUR APP SBS

S in gl e

P ly TPO PVC EPDM

HA CA CA HW HA CA HW SA MF FA MF FA MF FA BA

Do not use with Multi-Ply systems Compatible with the selected Single Ply systems above

Key: HA = Hot Applied CA = Cold Applied HW = Heat Weldable SA = Self Adhered MF = Mechanically Fastened FA = Fully Adhered BA = Ballasted

Color

Black

RS-3009 2-18 (Replaces 7-15)

Refer to the Safety Data Sheet and product label prior to using this product.

The Safety Data Sheet is available by calling (800) 922-5922 or on the Web at www.jm.com/roofing.

JM EPDM R 75 mil Polyester-Reinforced

Ethylene Propylene Diene Monomer Membrane

Tested Physical Properties

Physical Properties

ASTM

Test Method Standard for

ASTM D 4637, Type II JM EPDM – R 75 mil

S tr en gt h

Breaking Strength (lbf) D 751 A > = 90 287

Elongation at Fabric Break, Ultimate (%) D 751 A > = 15 MD 35, XMD 36*

Elongation, Ultimate (%) D 412 > = 250 482

Tear Strength (lbf) D 751 B > = 10 104

Dynamic Puncture Resistance, 10J, Type II D 5635 pass pass

Static Puncture Resistance, 55.1 lbf, Type II D 5602 pass pass

Lo ng ev it y

Overall Sheet Thickness (in.) D 751 +/- 10% pass

Thickness Over Scrim, Weathering Side (in.) D 7635 0.015 0.033

Brittleness Point (°F) D 2137 < = -49 pass

Ozone Resistance D 1149 pass pass

Water Absorption (mass %) D 471 < = 8 0.1

H ea t A ge d

P er fo rm an ce

Heat Aged 670 hrs @ 240°F D 573

Breaking Strength (lbf) D 751 > = 80 297

Elongation, Ultimate (%) D 412 > = 200 284

Linear Dimensional Change (%) D 1204 < ± 1 0.02

W ea th er in g

P er fo rm an ce

Weathering Resistance, 5040 KJ/(m2-nm) @ 340 nm D 4637 / G 151 / G 155

Visual Inspection – pass pass

* MD = Machine Direction

XMD = Cross-Machine Direction

Meets the requirements of ASTM D 4637, Type II

RS-3009 2-18 (Replaces 7-15)

Refer to the Safety Data Sheet and product label prior to using this product.

The Safety Data Sheet is available by calling (800) 922-5922 or on the Web at www.jm.com/roofing.

800-479-6832 | P.O. Box 7000 | Carlisle, PA 17013 | Fax: 717-245-7053 | www.carlislesyntec.com

E X P E R I E N C E T H E C A R L I S L E D I F F E R E N C E

Pressure-Sensitive Molded Walkway Pads

Overview

Carlisle's Sure-Seal EPDM Pressure-Sensitive (PS) Molded Walkway Pads are designed to protect the membrane in those areas exposed to repetitive foot traf昀椀c.

Walkways must be installed at all traf昀椀c concentration points (i.e., roof hatches, access doors, rooftop ladders, etc.) regardless of traf昀椀c frequency Walkways must also be installed if regular maintenance (once a month or more) is necessary to service rooftop equipment.

Features and Bene昀椀ts

» Excellent tear and puncture resistance

» UV resistance

» Slip resistance

Installation

1. The entire surface where the PS Molded Walkway Pad will be applied must be clean. The adhesive on the back of the PS Molded Walkway Pad will not adhere to dusted or dirty surfaces. Any residual contamination will be detrimental to the bond strength of the adhesive.

2. Remove all foreign material.

a. Remove excess mica dust by brooming or wiping with a clean, dry rag or Carlisle HP Splice Wipe.

b. The use of Weathered Membrane Cleaner may be necessary. This process is essential on membrane that has been exposed for a number of weeks.

Note: Permeation-resistant gloves (that meet ANSI/ISEA 105-2005) are required for hand protection when cleaners or primers are being used.

c. Allow the membrane to dry thoroughly before proceeding.

3. Application of HP-250 or Low-VOC EPDM Primer

a. Standard Membrane - Apply the primer with a clean HP Splice Wipe (or equivalent). Scrub the area of the membrane (where the PS Molded Walkway Pad is to be applied) in a circular motion to achieve a thin, even coating on the membrane. The properly cleaned/primed area will be uniform in color without streaks and free of globs or puddles.

b. Pre-Kleened™ Membrane - Roller-apply the primer to the membrane with a short nap-length paint roller. The coated area will be free of globs or puddles.

Note: The use of excessive amounts of primer will not signi昀椀cantly enhance the adhesion of the PS Molded Walkway Pad to the EPDM membrane. Use only the amount necessary to obtain 100% coverage of the area where the PS Molded Walkway Pad will be applied.

4. Allow the primer to properly 昀氀ash off until it does not transfer to a dry 昀椀nger touch. Install the PS Molded Walkaway Pads as soon as the primer 昀氀ashes off to minimize potential dust contamination and promote adhesion in colder weather.

5. Allow a 1"-wide (25 mm) gap between PS Walkway Pads. Discontinue Walkways over 昀椀eld splices allowing a minimum 1" (25 mm) gap.

Review Carlisle speci昀椀cations and details for complete installation information.

E X P E R I E N C E T H E C A R L I S L E D I F F E R E N C E

800-479-6832 | P.O. Box 7000 | Carlisle, PA 17013 | Fax: 717-245-7053 | www.carlislesyntec.com

01.19.24 © 2024 Carlisle.

REPRINT CODE: 603144 EPDM-1098 - “Sure-Seal EPDM Pressure-Sensitive Molded Pads Product Data Sheet”

Carlisle, Sure-Seal and Pre-Kleened are trademarks of Carlisle.

LEED is a registered trademark of the U.S. Green Building Council.

Precautions » The product is to be used as a walkway only and is not designed as a substitute for ballast.

» PS Molded Walkway Pads cannot be installed within 10' (3 m) of the roof perimeter or on projects that exceed 50' (15 m) in height for Design “B” systems. Concrete pavers may be used in these areas.

» When installing walkways in conjunction with ballast, avoid the entrapment of small ballast below walkways. Also, avoid excessive application of primer on ballasted systems installed over EPS insulation.

» PS Molded Walkway Pads are a maintenance item and are not covered under the Carlisle membrane systems warranty.

Typical Properties and Characteristics

Color Black or Gray

Total Pad Thickness 0.375" (9 mm) +/- 10%

Tensile Strength, psi ASTM D412 Unaged 500

Tear Resistance, ibf/in ASTM D624 Unaged 250

Size 30" x 30" (750 mm x 750 mm)

Packaging 50 per skid

Weight 10 lbs. each

Typical properties and characteristics are based on samples tested and are not guaranteed for all samples of this product. This data and information is intended as a guide and does not re昀氀ect the speci昀椀cation range for any particular property of this product.

Pressure-Sensitive Molded Walkway Pads

LEED® Information

Pre-consumer Recycled Content 100%

Post-consumer Recycled Content 0%

Manufacturing Location Carlisle, PA Greenville, IL

Solar Re昀氀ectance Index (SRI) N/A

VaproShield LLC | 915 26th Ave. N.W. | Suite C5 | Gig Harbor, WA 98335 | Toll Free 1-866-731-7663 | www.VaproShield.com | 03/25/25 3 of 3

MASS TIMBER MOISTURE PROTECTION PRODUCT DATA SHEET

SlopeShield Plus Self-Adhered, WrapShield IT Integrated Tape, PanelShield SA

Testing Tested to industry standards for vapor permeable roofing underlayment air barrier materials.

View individual product data sheets for industry standard testing data.

Installation

STORAGE AND HANDLING

Store materials on end in original packaging at temperatures between 40°F and 120°F (4.4°C and 48.9°C). Protect materials from direct sunlight and inclement weather until ready for use.

SAFETY

CAUTION: Release liners are slippery. To prevent injury, liner should be removed from under foot as soon as membrane is installed and disposed of properly.

Work crews are safe around VaproShield membranes they contain zero VOCs or toxins.

Persons who access any roofs, involved with roof construction, repair or maintenance shall use appropriate personal protective equipment including, but not limited to, hard hats, eye protection, and leather gloves and must be trained on safe practices relevant to their work.

Where the use of ladders, scaffolds, platforms, or temporary floors are utilized, safety lines and safety harnesses shall be used. Please access the OSHA Web site at www.osha. gov, contact your local OSHA office, or visit the local federal bookstore to obtain the most current information on OSHA 29

CFR 1926.

PREPARATION

For self-adhered membranes all surfaces must be dry, sound, clean, “as new” condition, and free of oil, grease, dirt, excess mortar or other contaminants detrimental to the adhesion of the roofing underlayment or WRB air barrier. Fill voids and gaps in substrate greater than ½” (12.7 mm) in width to provide an even surface.

BEST PRACTICE INSTALLATION

SlopeShield Plus SA

Install SlopeShield Plus SA over mass timber roof deck/floor deck, tape all seams using VaproTape.

Protect base of post/columns by cutting SlopeShield Plus SA to post/column base width and wrap around the base of the post/column. Remove release film and adhere to roof deck/ floor deck and up posts/columns to the height of the topping slab surface. Cut strips of SlopeShield Plus SA and notch to protect corners. Remove release film and adhere to roof deck/ floor deck and post/column. Use VaproTape to cover all seams and edges of the SlopeShield Plus SA.

WallShield IT

Wrap post/columns and beams with WallShield IT to protect against moisture intrusion and construction damage. Use VaproTape to hold seams together when required.

PanelShield SA

All overlaps must be a minimum of 3” (8 cm) on vertical and horizontal seams. Inside and outside vertical corner overlaps should be a minimum 6” (15 cm) in both directions, staggered a minimum of 24” (61 cm), and should not occur directly above or below windows or doors. Use a roller to activate pressure-sensitive adhesive.

Visit VaproShield.com for complete installation instructions and details.

LIMITATIONS

SlopeShield Plus Self-Adhered should be covered within 180 (6 months) of installation with permanent roofing/flooring material. Minimum recommended application temperature of 20˚F (- 6.0˚C) and rising.

PanelShield SA should be covered with cladding within 12 months of field assembly. Minimum field assembly recommended installation temperature of 20˚ F (- 6.0˚ C) and rising.

If desired adhesion is not attained between membranes due to site conditions, VaproShield recommends applying a bead of

VaproBond as an additional solution to pressure rolling.

PHYSICAL PROPERTIES

PROPERTY SlopeShield Plus Self-Adhered WallShield IT Integrated Tape PanelShield SA

Color Black with White Lettering (top) Green (top), White (back) Black/Yellow

Thickness 0.51 mm (20 mil) 0.56 mm (22 mil) 0.45 mm (18 mil)

Membrane Weight 447 g/m² (1.46 oz/ft2) 191.4 g/m2 (0.627 oz/ft2) 355.64 g/m2 (1.17 oz/ft2)

Roll Weight 50.6 lbs (23.0 kg) 34 lbs (15 kg) 48.6 lbs (22 kg)

Roll Dimensions 59” x 102’ (1.5 m x 31.1 m) 59” x 164’ (1.5m x 50m) 59” x 102’ (1.5m x 31.1m)

Roll Coverage 500 ft² (46.6 m²) 807 ft² (75 m²) 500 ft2 (46.65 m2)

Skid 25 rolls 20 rolls 25 rolls

Field Exposure Before Enclosed or Permanent Cladding/Roofing System

180 days (6 months) 180 days (6 months) 12 months

Minimum Application Temperature 20°F (-6°C) Unlimited 20° F (-6 C)

Service Temperature minus 40°F (-40°C) - 250ºF (121ºC) minus 40°F (-40°C) - 183°F (84°C) minus 40°F (-40°C) to 250°F (121°C)

Home (https://www.trudoor.com) Commercial Door Hardware

(https://www.trudoor.com/commercial-door-hardware/) Miscellaneous Hardware and

Accessories (https://www.trudoor.com/commercial-door-hardware/miscellaneous-hardware/) SB360 Heavy Duty Surface Bolt

Ives SB360 Heavy Duty Surface Bolt $91.72 Usually Ships: 1-2 Business Days

Meets ANSI/BHMA A156.16

1-1/4″ throw for maximum security

UL Listed up to 3 hours (fire-rated)

(https://www.trudoor.c

FREE SHIPPING ON MOST HARDWARE ORDERS OVER $200!

Help Center (https://www.trudoor.com/help/) Log In / Register 1-844-TRUDOOR(844-878-3667)(tel:844-878-3667)

Get a Quote(/quote-request)

(https://www.trudoor.com) https://www.trudoor.com/ https://www.trudoor.com/commercial-door-hardware/ https://www.trudoor.com/commercial-door-hardware/ https://www.trudoor.com/commercial-door-hardware/miscellaneous-hardware/ https://www.trudoor.com/commercial-door-hardware/miscellaneous-hardware/ https://www.trudoor.com/commercial-door-hardware/miscellaneous-hardware/ https://www.trudoor.com/commercial-door-hardware/miscellaneous-hardware/ https://www.trudoor.com/brand/ives/ https://www.trudoor.com/help/ tel:844-878-3667 https://www.trudoor.com/quote-request

Quantity: - 1 + ADD TO CART | $91.72

Product Overview

Ives SB360 Surface Bolt, 12″ Length, US2C/604 Clear Zinc Finish

Surface bolt has 1-1/4″ throw for maximum security

Jimmy-resistant design, bolt locks automatically when thrown, can be released only be pressing knob toward door while retracting

Ideal for all types of doors

Available in 12″ length

Unit locks in both the up and down position

Accepts padlock (not furnished) with maximum 3/8″ diameter shackle, minimum 1-3/4″ shackle opening height

Units packed with one-way wood screws for added security − Standard wood screws also supplied

Units packed with a universal top strike (US)

Certifications

Meets ANSI/BHMA A156.16

UL10C Listed (3 hour) fire doors up to 10’0″

Miami Dade County NOA listed

Florida Building Commission listed

FEMA 361 and 320 listed

Dimensions

Bar: 3/4″ wide x 3/4″ thick

Overall width: 2-1/32″

Overall projection: 2-1/16″

Top Strike: 1-1/2″ wide x 1-1/2″ long x 3/16″ thick

Brand Ives (https://www.trudoor.com/brand/ives/)

Finishes US2C/604 Clear Zinc

Specifications https://www.trudoor.com/brand/ives/ https://www.trudoor.com/brand/ives/

FEATURED WEST ADVISOR®

Home | ... | Handles & Pulls

PERKO

PERKO® Flush Lifting Handle, 3" x 2-1/4"

Model # 255711 Mfg # 1220DP0CHR

$39.99 | (11) Advice & How-To

Free pickup at Anchorage Check Other Stores

Ready today for pickup inside the store

Only 3 left!

Pickup

Ready today

Same-Day

Not available

Shipping

Get it by Sep 11

Add product protection powered by What's Covered?

$4.99 $6.49 $7.991 Year: 2 Year: 3 Year:

− 1 +

Pay with on orders over $50Affirm

View More

Specifications

Product Details

Heavy duty lifting handles that keep out of the way

Heavy deck hatches can be difficult to lift with smaller and often single-finger lifting rings. Perko makes it easier with flush handles that provide enough space for 2-3 fingers. These chrome plated cast bronze and chrome plated zinc lifting handles can be mortised into hatches 5/8" thick or greater to provide a truly flush finish (can be installed in thinner material, however, underside of casting will be visible through required cut-out). Regardless if you select a bronze or zinc lifting handle, each is pre-drilled for counter-sunk oval or flat head screws. Give yourself the extra pulling power with Perko flush lifting handles.

Key Features

Large handle makes lifting heave deck hatches easier on your hands

Available in chrome plated zinc or bronze

Two sizes available to match the application

Can surface mounted or mortised into hatch for completely flush installation (3/32" thick flange, 1/2" overall depth bronze handles, 3/8" overall depth zinc handle)

Compatible with oval and flat head screws

Requires #8 FH screws (sold separately)

Made in The USA

Mounting Template

ADD TO CART - $39.99

15% Off your order with code SEPT15. Shop Now

Find a Pro Set Zipcode Set Store

Search Supplies, Gear & Clothing

Chat Now

9/5/25, 10:52 AM PERKO PERKO® Flush Lifting Handle, 3" x 2-1/4" https://www.westmarine.com/perko-perko-flush-lifting-handle-3inch-x-2-1-4inch-255711.html?utm_medium=cpc&utm_source=google&utm_campaign=GGL_PLA_Galley %26 Outdoors_High Margin&gad_source=1&g… 1/4 https://www.westmarine.com/ https://www.westmarine.com/handles-pulls/ https://www.westmarine.com/perko/ https://www.westmarine.com/on/demandware.store/Sites-WestMarine-Site/en_US/Stores-FindInventory?pid=255711 javascript:void(0);

javascript:void(0) javascript:void(0) javascript:void(0);

https://perko.com/images/catalog/pdf/Fig.%201220%20Inst.pdf https://www.westmarine.com/west-advisor/Selecting-Marine-Cabinet-Hardware.html https://www.westmarine.com/categories/ https://www.westmarine.com/categories/ https://www.westmarine.com/categories/ https://www.westmarine.com/categories/ https://www.westmarine.com/categories/ https://www.westmarine.com/proservices.html javascript:void(0);

https://www.westmarine.com/store-finder?showMap=true https://www.westmarine.com/ https://www.westmarine.com/cart

40H Series Heavy Duty Mortise Locks by BEST

BEST: Setting the Standard for Security

2 40H Sereis

TABLE OF CONTENTS

Features Specifications.....................................................................................................................3-4 Universal Lock Concept How To Order...................................................................................................................... 6-8 Special Features Service Equipment Hand of Door

Mortise Sample Specification........................................................................... 9-10 Levers, Knobs & Trims........................................................................................... 10-13 Functions............................................................................................................................ 14-18 48H & 49H High Security Specification 48H & 49H Function & How To Order Standard & High Security Cylinders...................................................... 19-20

40H Series – Features

1. � Solid one-piece stainless steel anti-friction latch provides 50% more surface contact with strike for superior strength and security. Reversible latch rotates 180 degrees for easy handing change without opening case.

Precision-engineered curve provides enhanced cycle life with reduced wear to the strike.

2. � Non-handed cylinder retainer.

3. � Armored front completely surrounds latch and deadbolt providing increased lateral strength. Staked assembly design allows the armored front to self-align with the door bevel during installation.

4. � Enhanced case integrity achieved through four case cover screws (one at each corner), plus interlocking armored front and cover design at the latch.

5. � Roller bearing hub mechanism provides smooth, wear resistant operation.

6. � Locking toggle includes clear indication of “locked” and “unlocked” states. 7.

40H case, cover, and armored front manufactured from 0.095” cold rolled steel for strength and durability.

8. � Fusible link.

9. � Four position hub toggle design determines whether each hub is always locked, always unlocked, or locked by key for easy handing change without opening case.

10. � Lever return spring mechanism located in trim for enhanced protection against lever droop, providing a firm, positive return of the lever to the horizontal position.

11. � Self-aligning trim mechanism for fast, easy, and accurate installation.

12. � Curved lip strike and strike box assembly provides an aesthetic, non-handed solution to complement field reversible case.

13. � Solid machined cylinder rings with wavy washer provides resistance to wrenching of cylinder. Cylinder security screw prevents removal of cylinder without first removing interchangeable core.

14. � Visual indicator options show a padlock icon open for unlocked and padlock icon closed and painted red for locked.

15. � Non-handed stainless steel auxiliary bolt for ease of changing hand. (not shown)

7 4 2 3

40H Cutaway

Visual Indicator Options

VIN

VIT

unlocked unlocked locked locked

Strike box & Strike

40H Exploded

340H Series

Specifications

ADA-Americans With Disabilities Act:

45H Series –The design and operation of the BEST® mortise lock meets the intent of the standard for ANSI A117.1 section 404.2.6.

Builders Hardware Manufacturers Association:

45H Series –ANSI A156.13, Series 1000, Grade 1 Operation and Strength, Grade 2 Security. To meet Grade 1 Security, a drill resistant core (1CD, 1CDP, 1CDF, or 1CDX) must be used with escutcheon trims, and 1EK7K4 high security cylinder must be used with sectional trims.

47H Series – ANSI A156.13, Series 1000, Grade 1 Operational, Strength, and Security.

Underwriters Laboratories® – The 40H series is listed by Underwriters Laboratories for use on a 3 hour A label doors. These locks also carry the C-UL mark which is officially accepted in all of Canada, indicating compliance with appropriate Canadian standards and codes.

The 47H series locks conform to UL437 standard for key locks, referencing door locks. The 1EJ7J4 cylinder used in the 47H series also conforms to UL437 standard for key locks, referencing high security cylinders, and is listed for Canada as well as the United States.

Florida Building Code (FBC) Listed – See certification listing for all 40H series lock functions that are certified for use in applications requiring a design pressure rating as specified.

Description Model Single Door Double Door

PSF w/o DeadBolt 45H and 47H +-60 +-35

PSF w/ DeadBolt 45H and 47H +-60 +-35

PSF w/ DeadBolt 48H and 49H +-40.5 +-40.5

Auxiliary bolt – Stainless steel, non-handed.

Backset – 2-3/4"

Case –0.095” cold rolled steel, 5- 7/8" H x 7/8" D x 4-1/16" W. Steel is zinc dichromate plated for corrosion protection.

Deadbolt – Stainless steel, 1" throw.

Latchbolt –Solid stainless steel, 3/4" throw. Latch is oil-impregnated for anti-friction operation. Reversible without opening case.

Strike – For complete strike package spec’s see page 5.

Door Thickness – Standard lock configuration designed for doors 1-3/4" thick. Thick door configuration available for doors up to 5" thick (specify thickness when ordering).

Faceplate –Stainless steel, brass or bronze material, 8" H x 1-1/4" W x 1/16" T. Lock face automatically adjusts to proper bevel during installation.

Products protected by one or more of the following patents: 4,873,853 5,590,555 5,794,472

Finishes –

• �622 – flat black coated (brass base material) 625 – bright chromium plated (brass base material)

*613 finish is designed to wear over time, providing an “antique” appearance.

*690 finish will continue as a dark brown appearance over time.

Antimicrobial Finish –

The BEST UltraShield finish inhibits the growth of bacteria and other microbes on the surface of the hardware.

NOTE: BEST UltraShieldTM option is recommended for use on any hardware application where product cleanliness is a high priority. i.e;.

Hospital/Healthcare, Elderly Care, Education, Transportation, Food-Service, Hospitality.

4 40H Sereis

Universal Lock Design Concept Strength, Durability…and now Flexibility. Sure, a mortise lock is one of the strongest and longest lasting locks available. But who says it has to be the most complex to order and install? When designing the 40H mortise lock, BEST® decided to focus on things that would make the lock easier to use, while at the same time maintaining the strength, durability, and dependability you would expect in a BEST® mortise lock.

In addition to the ability to quickly change the lock handing, the universal case design of the 40H provides the ability to reconfigure a lock into many different functions easily and quickly, often by rearranging existing parts without disassembling the lock case. The efficiency of the design enables over 12 of the most commonly used lock functions to be included in just 3 case configurations.

The 40H provides the ability to postpone decisions on how the lock will be configured all the way up to the point of installation, making it one of the most flexible and user-friendly mortise locks available. This translates into value for anyone involved in the process, whether they’re an architect, specification writer, distributor, or end-user.

Flexibility in Ordering BEST offers three ways in which to order the 40H mortise lock. YOU get to choose which method meets your needs.

Function Specific Lock - If you know exactly what you need in a mortise lock, and are confident that your needs won’t change, then order your 40H locks in the traditional way by specifying the exact function, trim, finish, and handing. BEST® will build the locks to work exactly as specified, so they may or may not have the ability to be converted to another function in the future.

Universal Lock - If you want to keep your options open, this method of ordering the 40H is for you. BEST® has developed three “universal” functions that can be configured to a variety of common functions, all without opening the lock case. When any of the universal functions are ordered as a complete lock, all the necessary parts (including trim) are provided to configure any of the functions in that group. Universal locks can only be ordered with sectional trim. If escutcheon trim is needed, order a three-part lock.

Specifications

#4 Knob –Diameter – 2-1/8" ; Projection on door – 2-7/8" Material machined from solid brass or bronze.

Decorative and Special Order Lever Handles –Stainlesssteel base material with applied finish.

Standard Lever Handles – Brass, bronze, or stainless steel base material for standard lever designs. Lever styles #3, #14, and #15 return to a minimum of 1/2" of door surface. Lever styles #3 and #14 conform to California Titles 19 and 24. Lever styles 12, 16 and 17 do not return.

Levers project 2-15/16" from door surface with H, J, R and S trim. Levers project 3-1/64" with M and N trim..

Roses – Wrought brass, bronze, or stainless steel base material.

H – Flat w/ round edge, 2-3/4" diameter.

R – Contoured w/ round edge, 2-3/4" diameter.

S – Flat w/ beveled edge, 3-1/2" diameter.

Escutcheons – J – Wrought brass, bronze, or stainless steel base material, 7-1/2" H x 2-9/32" W x 17/32" T. M & N – Forged brass or bronze, 8" H x 2-1/8" W x 37/64" T, through bolt mounted (no exposed screws outside). M – Standard cylinder; N – Concealed cylinder.

Vandal Trim –VT– Vandal trim is available in standard finish for H, J, M, N, R, and S trims in either #14 or #15 levers.

NOTE: Not available in single or dummy trim functions. If compliance to California Building Code Title 19 & 24 is required, the #14 lever design must be specified.

Visual Indicators –VIN– Visual indication uses an unlocked padlock or locked padlock image with red background to indicate lock state.

VIT–Visual indication uses a thumb-turn with color coded locked and unlocked icons – red indicates door is secure and green indicates door is unsecure.

UNR ANSI UNT ANSI UNAB ANSI

A – office F04 L – privacy F19 AB – office F20

AT – office F04 T – dormitory F13 TA – dormitory F12

D – storeroom F07 TD – dormitory

N – passage F01

NX – exit F31

R – classroom F05

540H Series

Four-Part Lock – For the maximum flexibility in ordering a mortise FOUR-PART LOCK lock, BEST® provides a way to order your 40H lock in four parts: Inside Trim, Case Only, Outside Trim and Strike Packages. The kits that make up these four parts have been carefully designed so that when all three are combined you have everything found in a complete 40H lock. This order method is ideal for customers wanting to stock a variety of trim designs with a minimal number of lock cases.

Parts Ordering Made Easy – No more searching through service manuals or calling technical support for the right part numbers. BEST® has developed a variety of kits you can order when you only need part of a 40H mortise, rather than the whole lock.

Case Only – A Case Only lock includes all parts normally included with a complete lock that are not specifically associated with either the inside or outside trim, including: lock case, face plate, strike and strike box, fasteners (for case and strike), and installation instructions. Case Only mortise locks will be shipped in the standard mortise packaging, allowing trim kits to be included at a future date to make a complete lock.

Trim Kit – A 40H Trim Kit is simply one half of a complete trim package. An Outside Trim Kit must always be matched up with an Inside Trim Kit to operate with a lock. Each kit includes all the necessary parts (including fasteners) required for installation that are associated with just the one side of the door.

Lever Set – A lever set kit provides the inside lever assembly (with set screw) and outside lever assembly (with spindle attached). Thick Door and Tactile Lever options are available for this kit.

Faceplate Kit – Face Plate kit includes a finished faceplate and the appropriate screws. Security Head screws are an option for this kit.

Replacement Spindle – As a security feature, the outside spindle on the 40H is designed to twist off during abuse before any internal damage to the lock occurs. The Replacement Spindle kit is a quick, easy, and inexpensive way to replace any spindles damaged by attack or abuse. This kit includes the inside and outside spindles, plus the pin to attach the outside lever.

Screw Kit – Nothing’s more frustrating than spending time searching for the part number of a single screw. With the 40H Screw Kits, you don’t have to worry about that anymore. These kits have been designed to provide all the necessary fasteners for one lock in a single bag. All you need to know is the trim style and finish, and you’re set. Security head screws are an option for this kit.

Function Letter Chart

UNR ANSI ANSI UNAB

1DT F19 L

2DT F02 LB

F04 A LT

F20 AB F01 N

F04 AT F31 NX

F21 B F05 R

B5 F06 RHB

B7 F35 S

F08/F10 BA F13 T

BW F12 TA

F09 C TD

CHB F30 W

F07 D F17 AD

F14 G F29 RD

F15 H F16 WD

F15 HJ F18 YD

F34 INA UNR

F33 IND UNT

F32 INL UNAB

Strike Packages S1 – Standard strike:

4-7/8" x 1-1/4" x 3/32", nonhanded, curved lip, 1-1/4" lip to center strike. Fits standard door frame ANSI A115.1, and comes with plastic strike box.

S5 – Latchbolt-only strike:

4-7/8" x 1-1/4" x 3/32", handed, curved lip, 1-1/4" lip to center strike. Fits standard door frame ANSI A115.1, and comes with wrought steel strike box.

S6 – Latchbolt/Deadbolt strike:

4-7/8" x 1-1/4" x 3/32", handed, curved lip, 1-1/4" lip to center strike. Fits standard door frame ANSI A115.1, and comes with wrought steel strike box.

Strike Package

Case Only

Inside Kit

Outside Kit

Four-Part Lock

6 40H Sereis

How to order: 45H

45H 7 R 14 H 626 RH

Series Core Housing

Function Code Lever Style

Trim Style Finishes

Door Hand Options

45H – standard mortise lock

0 – keyless 7– 7-pin housing accepts all Best cores

A – office D – storeroom L – privacy N – passage R – classroom T – dormitory etc.

Standard Levers:

� 3– solid tube/ return � 12– solid tube/ no return � 14– curved return � 15– contour/angle return � 16– curved/ no return � 17– gull wing Knobs:

4– round

H– 2 3/4" dia.

R– 2 3/4" dia.

S– 3 1/2" dia.

J– wrought M– forged N– forged (concealed cyl.)

Satin

Bright

Antimicrobial

626AM

630AM

RH

RHRB

LH

LHRB

LL– lead lined SH– security head screws Thick Door– (specify thickness if other than 1-3/4" ) TAC– tactile lever/knob 7/8 LTC– 7/8" lip-to-center strike VIN*– visual indicator S1– standard strike S5– latchbolt-only strike S6– latchbolt/deadbolt strike VT– vandal trim VIT*– visual indicator thumbturn VIB*– double visual indicator WS– windstorm label pages 15-18 page 3 page 9

How to order: 47H

47H 7 R 14 M 626 RH

Series Core Housing

Function Code Lever Style

Trim Style Finishes

Door Hand Options

47H – lever / knob high security mortise lock

7–7 pin housing, must use 5C cores and long blade keys

A – office D – storeroom R – classroom T – dormitory etc.

Standard Levers:

� 3– solid tube/ return � 12– solid tube/ no return � 14– curved return � 15– contour/angle return � 16– curved/ no return � 17– gull wing Knobs:

4– round

H– 2 3/4" dia.

R– 2 3/4" dia.

S– 3 1/2" dia.

M– forged

Antimicrobial

626AM

630AM

RH

RHRB

LH

LHRB

K– non UL cylinder LL– lead lined Thick Door– (specify thickness if other than 1-3/4" ) TAC– tactile lever/knob 7/8 LTC– 7/8" lip-to-center strike VIN*– visual indicator S1– standard strike S5– latchbolt-only strike S6– latchbolt/deadbolt strike VT– vandal trim WS– windstorm label pages 15-18 page 3 page 9

*VIT option only compatible with H, R, S, J & M trim styles. VIN & VIB options only compatible with H, R & J trim styles.

How to order: 45H Case Only

45HCA R 626 RH

Series Function Code Finishes Door Hand Options

47H – lever / knob high security mortise lock

A – office D – storeroom R – classroom T – dormitory etc.

RH

RHRB

LH

LHRB

SH– security head screws 7/8 LTC– 7/8" lip-to-center strike pages 15-18 page 3 page 9

740H Series

How to order: 40H Trim Kits

40HTK OS2 14 H 626

Series Backset Function Code Lever/Knob Style Trim Style Finishes Options

40HTK– trim kit IS1– inside lever only IS2– inside lever x thumb turn IS3– inside lever x cylinder IS4*– inside cylinder only IS5– inside thumb turn only IS6– inside lever x cylinder x VIN OS1– outside lever only OS2– outside lever x cylinder OS3– outside lever x emergency plate OS4*– outside cylinder only OS5– outside lever x VIN OS6– inside lever x cylinder x VIN NOTE: VIN– visual indicator

Standard Levers:

Knobs:

4– round

H– 2-3/4" dia.

R– 2-3/4" dia.

S– 3-1/2" dia.

J– wrought M– forged N– forged (concealed cyl.)

D– double cylinder Thick Door– (specify thickness if other than 1-3/4" ) SH– security head screws TAC– tactile lever/knob pages 15-18 page 3

* Only works with H, R, S, M and N trim.

How to order: 40H Strike Packages

40HST S1 626

Series Kit Number Finishes Options

40HST– strike package S1– standard strike S5– latchbolt-only strike S6– latchbolt/deadbolt strike 4– strike box only

Thick Door– (specify thickness if other than 1-3/4" ) 7/8LTC– 7/8" lip-to-center strike SH– security head screws page 5 page 3

How to order: 40H Faceplate Kits

40HFP 3 626

Series Kit Number Finishes Options

40HFP– faceplate kit 0– AB

1– BW, TD, H, HJ

2– A

3– AT, D, C, INL, NX, R, W

4– N, LT

5– AD, RD, YD, WD

6– blank

7– BA, S, TA

8– B, G, IND, L, LB, T

9– CHB, RHB

10– blank (without logo)

Thick Door– (specify thickness if other than 1-3/4" ) 7/8LTC– 7/8" lip-to-center strike SH– security head screws page 5 page 3

How to order: 40H lever sets

40HLS 14 626

Series Kit Number Finishes Options

40HLS– lever set Standard Levers:

Knobs:

4– round

Thick Door– (specify thickness if other than 1-3/4" ) SH– security head screws VT– vandal trim

Decorative & special order levers: pages 12-14

8 40H Sereis

How to order: 40H Replacement Spindles

40HRS 2

Series Function Code Options

40HRS – replacement spindle kits 2– 40H split spindle (standard) 4– 40H hook spindle*

Thick Door– (specify thickness if other than 1-3/4")

*Hook spindle is available for 1 3/4" thick door only.

How to order: 40H Vandal Trim Retrofit Kit

40HSK 14 626

Series Kit Number Finishes Options

40HVTK – vandal trim Standard Levers:

Thick Door– (specify thickness if other than 1-3/4" )

*Complies with California Building Code Title 10 and Title 24, part 12

How to order: 40H Screw Kits

40HSK 1 626

Series Kit Number Finishes Options

40HSK – screw kits 1– H, R. S, J trim screw kit 2– M, N trim screw kit 3– special purpose fasteners screw kit 4– surface mounted trim screw kit 5– VIN trim screw kit

Thick Door– (specify thickness if other than 1-3/4" ) SH– security head screws page 5 page 3

Series Trim Style Finishes Options

Indicator Thumb-turn

40HVIT

H– 2 3/4" Dia.

R– 2 3/4" Dia.

S– 3 1/2" Dia.

M– forged J– wrought

630AM

Thick Door– (specify thickness if other than 1-3/4" )

How to order: 40H Visual Indicator Laminate & Thumb-turn

Part Description Part Number

Indicator Laminate Thumb-turn Indicator Kit Thumb-turn Escutcheon Indicator Kit

86329 86829

Lead Lined Feature The 40H mortise lock can be lead lined to protect against x-rays.

Since the majority of lead lined doors contain the lead in the surface of the door, the 40H provides lead lining for the holes cut in the door when preparing the door for the trim. The cylinder hole is lead lined.

To order: designate “LL” on order procedure (page 6-7)

Security Head Screws Security head screws.

To order: designate “SH” on 45H/47H in order procedure (page 6-7).

Tactile Feature Knob/Lever This option is for use in applications where special notice is needed to warn the blind about safety or accessibility environments.

Depending on the style ordered, the knob or lever will receive either grooves or knurling as the tactile feature.

To order: designate “TL” on 45H/47H knobs/levers in order procedure (page 6-7).

Visual Indicator Feature This option adds a visual indicator for certain functions that visually reflects whether the lockset is in the locked or unlocked state.

This option is available for the following functions: TD– Dormitory, IND– Intruder, INL– Intruder, L– Privacy, LT– Privacy, S– Storeroom.

Visual indicator feature is standard on the H– Hotel function (page 2).

Vandal Trim VT–Vandal trim is available in standard finish for H, J, M, N, R, and S trims in either #14 or #15 levers.

Note: Not available in single or dummy trim functions. If compliance to California Building Code Title 19 & 24 is required, the #14 lever design must be specified.

Special Features

940H Series

Service Equipment ED211 Mortise Cylinder Wrench The BEST mortise cylinder wrench and test handle is an essential dual-purpose tool. It is used primarily to install or remove BEST mortise cylinders without marring the cylinder surface finish.